Let’s Build A Teardrop * Step-By-Step * - Part 33 (Roof Install)

  Рет қаралды 15,868

OregonBatman

OregonBatman

Күн бұрын

Today, we install the exterior roof! This will be a Step-By-Step tutorial on how to build your very own teardrop. A Simple backyard build, a project you will be proud of! We will be covering the bottom and outside of the teardrop with Filon. This will be a lot of fun… hope you stick around and enjoy the process!
This is Part 33 of my teardrop trailer project - Do It Yourself - video. Starting from the ground up of a 4 x 8 camp trailer. This is a Work-In-Progress, thank you for watching!
If you would like to drop me a letter or send something for review, my information is below:
If you would like to help support the channel, please do so by donating with PayPal! www.paypal.me/...
If you would like to drop me a line or send something for me to review, please email me:
batman97741@gmail.com
A. Bateman
PO BOX 499
Madras, Oregon 97741
Cheers!

Пікірлер: 46
@OregonBatman
@OregonBatman 4 жыл бұрын
The plans are no longer available for free. To learn how you can get a set of drawings to build your own teardrop, click this link: kzbin.info/www/bejne/ap7ZZI2wh799ea8 www.paypal.com/paypalme2/OregonBatman97741/15
@2old4u
@2old4u 4 жыл бұрын
Another fine video. Well thought out and executed.
@OregonBatman
@OregonBatman 4 жыл бұрын
Thank ya sir... lots of fun!
@TheWoodHaven
@TheWoodHaven 4 жыл бұрын
Man, that's a good looking build.
@OregonBatman
@OregonBatman 4 жыл бұрын
Thanks Daryl! Let me know when you're ready to build one... I'll shoot it your way and you can have FUN! :)
@bobbylowski9691
@bobbylowski9691 4 жыл бұрын
Love your videos bud, pls keep em coming! Until next time!!! 👍
@Dusty-Builds
@Dusty-Builds 4 жыл бұрын
I used to do quite a bit of thin panel work. Using a staple gun to fasten it down works well, but sometimes the staples can go to deep and end up pulling through. I came up with a solution that worked really well for me, but I did end up a staple gun that was dedicated for just paneling. I took the cover off the top of the gun and removed the piston and drive pin. On my gun they came out together. Then, I ground about 1/16" off the end of the drive pin. This leaves the staples just flush with the top surface of the paneling.
@OregonBatman
@OregonBatman 4 жыл бұрын
That is an awesome tip! I have a gun that I like but don't use that often for that very reason. Will shoot right through the wood. I tried using a regulator to cut down the pressure, but that failed as well.... would either stick up a 1/16 to an 1/8, or would shoot clean through. Works great on thicker material but the thin stuff... forget it. I will have to try your trick and see if that will remedy the problem! Thanks.
@mlangfordoutdoor
@mlangfordoutdoor 4 жыл бұрын
I would have great interest in how to do that to a staple gun as I build a camper once in a while, I always come here to OregonBatman to learn things from him
@Dusty-Builds
@Dusty-Builds 4 жыл бұрын
@@mlangfordoutdoor What is the model of your staple gun?
@downtownredneck5079
@downtownredneck5079 4 жыл бұрын
That is looking SOOOO good, keep it up!
@OregonBatman
@OregonBatman 4 жыл бұрын
Thanks man! Looking forward to getting it done!
@donaldburton6869
@donaldburton6869 4 жыл бұрын
It's really looking like a teardrop now!! I'm impressed. You should do this for profit. I'm wondering if you designed this yourself and if so you did a nice job doing that as well.
@OregonBatman
@OregonBatman 4 жыл бұрын
Hi Donald, thank you! Yes sir... my design. Created the design using Rhino 3D and printed my own plans. Cheers!
@Joker_68
@Joker_68 4 жыл бұрын
The mini batcave on wheels has sure taken shape Al, definitely turning out to be pretty bad ass from my side of the lens. You crack me up everytime you raise up your thumb can't help but think of Fonzy, heck with your throw back feathered hair all you need is the leather jacket and a black pocket comb hey. Stay safe and wash your hands and I'll catch you on the next one my dear friend.
@OregonBatman
@OregonBatman 4 жыл бұрын
LOL! Fonzy was the greatest! :)
@charlevoix418
@charlevoix418 4 жыл бұрын
Yep, very important to mark the position of the spars, because once covered by the skin, you can't see where to tack your staples. Pretty tough to do that job alone, especially when dealing with contact cement: congratulations!
@OregonBatman
@OregonBatman 4 жыл бұрын
Thanks Raynald!
@DZCamaro-kz2vd
@DZCamaro-kz2vd 4 жыл бұрын
once again....BEAUTIFUL WORK!
@kennymccartney1444
@kennymccartney1444 4 жыл бұрын
Looking good. Very exciting that it's almost done! Hatch and trim!
@OregonBatman
@OregonBatman 4 жыл бұрын
Getting real close! I'm looking forward to tricking it out a bit... that'll be the fun part!
@ROCKYDORRIER
@ROCKYDORRIER 4 жыл бұрын
Nice! Thanks for the video.
@OregonBatman
@OregonBatman 4 жыл бұрын
Thank you Rocky!
@projectchannel503
@projectchannel503 4 жыл бұрын
Looks great!
@heltonluz8025
@heltonluz8025 4 жыл бұрын
Como sempre, um excelente trabalho!
@OregonBatman
@OregonBatman 4 жыл бұрын
Obrigado meu amigo!
@toronado455
@toronado455 4 жыл бұрын
awesome!
@cabandit1
@cabandit1 4 жыл бұрын
That is truly coming along nicely. I hope to do one on a slightly larger scale next year.
@OregonBatman
@OregonBatman 4 жыл бұрын
Awesome! Thank you...!
@markchristie5577
@markchristie5577 4 жыл бұрын
Love the shape with the lower rounded edges. Have you decided what you are doing for fenders on it?
@OregonBatman
@OregonBatman 4 жыл бұрын
Thanks Mark! Those rounded corner set it off! :) I will be switching out the wheels and tires in the near future and will go with a couple of steel fenders, we'll see what that looks like.
@mlangfordoutdoor
@mlangfordoutdoor 4 жыл бұрын
Yes this shape is very cool
@ralphandnick
@ralphandnick 4 жыл бұрын
Hey I paypal'd you. When do expect the plans. I hope they are USPS delivered.
@OregonBatman
@OregonBatman 4 жыл бұрын
Hey bubba ash... need a little info, I usually email the plans same day. Email me with the Paypal account you used and I'll check it out.
@dragonden9227
@dragonden9227 4 жыл бұрын
So sir after this are you building another one this one where will you fix water tank and Gray water tank
@OregonBatman
@OregonBatman 4 жыл бұрын
I will build another one yes.... not sure about the tanks yet. Haven't quite decided on build
@kennethsmith4263
@kennethsmith4263 3 жыл бұрын
To make this 5 ft wide do I just add the 12 inches to the width
@OregonBatman
@OregonBatman 3 жыл бұрын
Yes sir... you may have to modify cabinets a bit if you want, but all else is same
@VictoryMC
@VictoryMC 4 жыл бұрын
Why would you use two different types of glues for the final roof panel?
@OregonBatman
@OregonBatman 4 жыл бұрын
Hey Enrique... I used a contact cement for the wood and used a glue specifically for the Filon. Two different types for two different purposes. Thanks for watching!
@dwayneburbridge3283
@dwayneburbridge3283 2 жыл бұрын
@@OregonBatman Revisiting this question: On the top areas of the roof, you used Titebond II along the edges and what I believe was Liquid Nail on the center spars. Why not one or the other? Thanks!
@OregonBatman
@OregonBatman 2 жыл бұрын
@@dwayneburbridge3283 The tightbond was used on the edges because there was good contact between the two surfaces. I used the liquid nails in a liberal amount to help fill any gaps on the spars. Hope that makes sense... Thanks for checking it out!
@Dusty-Builds
@Dusty-Builds 4 жыл бұрын
I'm confused. In your last video, you said you were going to use 1/4" for the roof because the 1/8" left to many wrinkles. At the start of this video, you said you were using 1/8". From what I can see, the plywood you ended up using looks to be about 3/16". Did I mention I was a little confused?
@OregonBatman
@OregonBatman 4 жыл бұрын
LOL!! I have a tendency to be a little confusing for sure! For my plans, I am using the 1/8 plywood for ceiling and roof. I think I made the comment that if I were to do it all over again, I would definitely use the 1/4" instead. The 1/8" bendable plywood is very flexible and doesn't lay flat. Maybe it was just the piece I pulled out for the roof, the ceiling piece worked great!
@ftilos
@ftilos 4 жыл бұрын
Hi. What brand and model number would you recommend for router? Thanks
@OregonBatman
@OregonBatman 4 жыл бұрын
Hi FP T! I am sort of partial to Bosch, and use a Bosch Colt 1 hp trim router. I also have a larger Bosch 1/2" shank for the big jobs. Dewalt has a pretty good router also, DWP611PK. I own a Porter Cable router and use occasionally... little noisier than Bosch. But my go-to is the Bosch Colt. Thanks for the question.... Cheers!
Мама у нас строгая
00:20
VAVAN
Рет қаралды 12 МЛН
How Much Tape To Stop A Lamborghini?
00:15
MrBeast
Рет қаралды 265 МЛН
Чистка воды совком от денег
00:32
FD Vasya
Рет қаралды 5 МЛН
Mini Cabin Camper Build ... Start to Finish
44:57
black spruce
Рет қаралды 336 М.
Интервью Лаврова Такеру Карлсону на Русском
1:21:21
ветряная мельница
Рет қаралды 127 М.
Full TIMELAPSE | Container home on wheels DIY build | RELAXING & NO TALKING (PART 1)
14:06
Ugly's Journey | Travel with Sabine & Marco
Рет қаралды 1,1 МЛН
Cozy BIKE CAMPERs | Micro Mobile Homes For Camping | BEST OF ALL TIME
25:32
Interesting & Creative Designs
Рет қаралды 805 М.
Мама у нас строгая
00:20
VAVAN
Рет қаралды 12 МЛН