Let's Build: US Army Chevrolet Truck (MiniArt 1/35)

[@NightShiftScaleModels]

My friends! I totally forgot that I actually built a Miniart kit before. The Ball Tank that started this channel was from them! It was probably caused by my approach to the model - about 85% of the parts ended in the recycle bin, and I completely missed the certified Miniart moment! :D

[@jamiestokes1402]

And the first model with rubber tread .... 1 big wheel.

[@honza9929]

I would recomend the T-54 B with a interior as it is fairly cheap and a good quality kit.

[@raditz197megatron92]

finally, i've been looking forward to this for so long, hope to see something like a ZIS-150 or opel blitz in the future.

[@martindione386]

Uncle Nightshift, I humbly think that the door decals needed a bit more weathering and chipping, they're too pristine compared to the rest of the truck, cheers!

[@wolflittlepsycho3437]

After so many episodes, please, pretty please, do your research on Annealing finally. Cause your last name means Blacksmith even tho you still miss the annealing part for years. Try heating it up, shove it in cold water and test the softness afterwards. Doing so with copper and even brass (PE) will unlock new chapter of your modelling life. Seriously.

[@prox7179]

I don't know if it's only me, but I think an unfinished model in like a factory setting would be extremely cool. The factory could be brand new, like Rheinmetall or something, or it could be an abandoned one from WW2, it works both ways.

[@vonsopas]

I would like to see something like that too, however I do reckon that it would be far harder to make a model don't look like a toy without weathering. Don't know

[@ABCD-asdf]

Great Idea - especially with these skills

[@NightShiftScaleModels]

It's my plan to build a model in oxide primer parked in a factory :)

[@fraserdouglas7693]

@@NightShiftScaleModels I would love to see that in a tank such as the Maus or another super heavy tank

[@jimj.9106]

I've been kicking around the idea of guys restoring a couple of WW II vehicles in an old service station. The kind that had two service bays and gas pumps out front. For this Chevy, it could be shown in pristine condition with the doors masked off for painting the stars. Between Tamiya and MiniArt there's enough tools, jacks and work benches to outfit a workshop. LEDs are available that mimic arc welding, flouresent lights going bad (flickering) etc.. I think MiniArt has a kit of office furniture. Do some research and find 1/35 scale bathroom fixtures for the required disgusting toilet!

[@Evaunit98]

It’s always a good day when Uncle Night shift uploads a new video

[@AkatsukiTheKitsune]

Yes

[@Jackoe69]

Lol. Such a npc comment

[@Evaunit98]

@@Jackoe69 I apologise for being a fan, shut up

[@ironspike171]

Dear Martin, most aircraft modellers use wide tape and mask the entire (flat) window in one go. And then cut with a fresh hobby blade the tape around the window, using the gap in the frame as guide. It will do you masking job WAY easier, faster and more fun. You are so good with guiding brushes, i bet youll be gold guiding a blade too to cut the masking. It almost hurts seeing you struggle with a million tiny tape pieces for a small window….

[@scobra1cz]

Or he can use mascol. Or just glue the windows after painting and before weathering.

[@garyparker2969]

Absolutely Gorgeous Work Sir 🏆🏆🏆🏆 God Bless 🤗 Gary.

[@charliegrs]

This was a cool video because you were outside your comfort zone. As someone who built only car models for years before transitioning to tank models I can tell its very eye opening to try a different kind of modelling as you learn a lot of new techniques. Building a Lamborghini is wayyy different than building a Sherman tank. Especially when it comes to painting. Its so much fun to build something in a way that youre not used to. You should try building a car model! Or if youre not really into cars maybe try a helicopter or plane model!

[@robdavinroy1761]

Watching and listening to you is better than any movie or TV series. Your production is so professional, including the lighting and camera work. And of course you are a marvelous artist that makes plastic come to life. Thanks for sharing your passion!!

[@markc7002]

That bench seat is a work of art, ultra-realistic!!

[@Booze_Rooster]

Got to do something about that door marking. It looks like its made out of construction paper and shares none of the weathering or scratching present on the door behind it. Spatter a little mud over the bottom of it with a toothbrush already! Nice job overall though. Very fun to watch you tackle it.

[@chris_obarski]

A tank or a truck, Night Shift will rock! And so Martin rocks here!

[@jdiddles9548]

Great looking model.. One detail I think could be possibly added is dusty/dirty windscreens, with clean areas where the windscreen wipers sweep. I've seen this at some model shows I've been to and I always felt this effect added an extra touch of realism... Plus it may also work a a bit of a cheat code to cover up any glueing mistakes around the windscreen edges.

[@_Jaspy_]

I was actually suprised he didn't do it.

[@the_once-and-future_king.]

And vertical streaks/scratches on the door windows.

[@davidstone-haigh4880]

Fantastic work. Really enjoy watching your vids. You give so much detail with an easy friendly approach. Each vid is a joy. All the best from The UK.

[@duchasasyn6854]

Hello uncle ! I completed my model ,after the year of work, it is a Panther F from RFM in 1:35 scale. I've gotta say, that i wouldn't be this skilled if i didn't came across your channel i teached many good modelling techniques from you :). Cheers form Poland 🇵🇱

[@scottmccloud9029]

Incredible work. Your attention to detail is remarkable.

[@Ferne345]

oooh im very stoked for the Big Diorama 👀

[@daniellejones5981]

I Love You! And I'm going to tell you, the weathering is Exquisite! But... I'm 63, and this truck looks Exactly like the ones I saw in the 1960s all over Tennessee! And I Mean Photographically Exactly The Same!!! Over aged for 1945, but Absolutely Perfect for 1965!!! And it was this old dirty rusty look that got me into Modeling in 1970, which girls didn't do back then. And if you ever what to do an Interior, try a Mini Art Pz IV, it made my Brain Hurt! But it is Beautiful! You could do it Real Justice!

[@apitheous194]

20 yr USAF Vet here. This is simply amazing indeed.

[@KGmodels]

Been waiting all those weeks,and once i saw it,I instantly clicked.Thanks for the content uncle Night Shift!

[@tomtruesdale6901]

You did a great job on that truck for someone who claims not to enjoy building trucks. The building and painting of the cargo was a class into itself. Thank you for that.

[@BigFred1925]

I bought this model, I tend to ca glue my fingers instead of the photo etch. I believe this kit will live in my stash for many years.

[@nonamesplease6288]

I built one of the MiniArt Austin armored car kits. My son gave It to me last Christmas. Like this Chevy, it is an astonishingly detailed kit and it built into a beautiful model. You can't see much of the detail painstakingly built and painted. I am a hobbyist who models in my less than abundant spare time and it took me several months and left me model exhausted. I had to take a break, but now that the weather is getting cold....

[@gregorysuddeth581]

The way you paint Olive Drab is so realistic looking. I especially like the way you paint the fuel drums. Another fantastic build.

[@flobuwalda3964]

Wow!!!!!!!!!!!!!! You make it looks sooo easy… But I know of my own experience that it isn’t! Love your work man❣️ You really are a Magician✨✨ Looking forward to the big diorama where this Beauty will find it’s place and shine✨ All the best from Holland for you and your loved ones❣️

[@dogmechanix]

As someone who exclusively builds gunpla and zoids kits i gotta say your videos make me want to try these techniques on those models and make them more rustic and less anime. Love all your work

[@Celebmacil]

Man, I miss Zoids kits. x.x

[@CheapCheerful]

The way you took some putty and made the plastic seat look plush, plump, and comfortable...! Geeze man. So good.

[@markbecht1420]

Just FYI, the big 9 pointed hollow star is the Ninth Army Service Forces, based solely in the US, specifically just certain Western states : Arizona, California, Idaho, Montana, Nevada, Oregon, Utah, Washington. They would never be seen outside those areas.

[@flyingscotsman9657]

I was wondering what that star was, I'd never seen it before now. Thanks for the info!

[@markbecht1420]

@@flyingscotsman9657 en.wikipedia.org/wiki/Army_Service_Forces If I have the bumper markings right it either Fort Lewis or Fort Lawton - both in the Seattle area. Homefront stuff is always overlooked

[@ducatisti]

Ahhhh, thank you, I was wracking my brain trying to remember where I'd seen that odd marking before! I've always thought it looked too much like a target and probably a good thing it never left the States.

[@ianpaschal]

Came looking for this comment. Generally if you're into armor modeling I would advise NEVER TRUST WHAT THE MANUFACTURER PAINTS ON THE BOX. Do your own research for historical photos.

[@gordonmcmillan4709]

Ninth Service Command

[@TheQueer23]

I love MiniArt, when you mentioned the amount of plastic I was not surprised :D

[@neilhaas]

I like this U.S. Army Chevrolet Truck very nice cool. ❤❤😊😊

[@jimj.9106]

Absolutely amazing as always! Every time I see you use black as a primer, I think the paint job will come out too dark but it never does! You have the paint jobs down to a combination of science and art. Beautiful, just beautiful!

[@PatrickParton-l2u]

Great work, as always. This has inspired me to do a truck loaded with supplies. During WWII, my grandfather was a cook in the 273rd Infantry Regiment and told me once that he traded a truck load of rice he received with a Japanese unit down the line for a truck load of sugar they received. After his unit crossed the Rhine, they were somewhere in Germany and there was a strawberry patch where they were. He told his commanding officer that he made sure the strawberries got ripe, he would make strawberry pies with the sugar and strawberries. He said that barbed wire was strung and a guard posted on the strawberries. He may have embellished a little, but I like to envision a repurposed Achtung Minen sign crossed out Strawberries written under Minen.

[@daniellejones5981]

That Japanese unit had to be the 100th Inf Regt 'Neisai' (SIC?)!

[@ho-2036]

I did two of the Miniart GAZ series of trucks and found the construction very challenging. The hard part was getting the frame square so that the engine fit correctly and it all lined up with the cab. The reason I did the second one was because I wasn’t fully satisfied with how the first one came out. Even the second time I had a few small problems. The good news is that the only person that will ever notice the problems is me. The models are beautiful. If I could give Miniart direct feedback I would tell them to make locator tabs more substantial. That would make building these kits much more straightforward.

[@paulregner5335]

This project and the huge German mortar have been two of my favorites. Yes, everyone loves an armor model, but some of the other vehicles of war are just as interesting.

[@johnmacdonald3940]

A really world short cut for masking tape. Put a layer of Vaseline on the area you want to protect. Make sure it is a thick layer to prevent paint going through. Then after the paint has dried just wipe it off. GL with it!

[@jameshall1300]

Amazing build. Its not easy to make something as mundane as a regular work truck interesting without scraping a lot of realism, but you did it. The sculpting and weathering on the seat and stowage was damn good.

[@chrisbernard3809]

Thank you for stepping outside your norm and doing this truck. I love to build older trucks both civilian and military. You are an artist and your technique is very inspiring. Please do more!

[@barneyfyfe8313]

I'm glad you pushed past your dislike for the subject matter. Great job!!!! I watch for your painting skills. I wouldn't care if each model itself was built off camera.

[@Maximbaumann]

Another boring day cranked up to high intensity of goodness with every new night shift upload

[@RTX_Gaming1]

The best feeling is when you get a KZbin notification from nightshift because you know it’s always going to be amazing

[@leechurchill1515]

That’s a beautiful finish you have achieved, the depth of contrast just jumps off the screen! The flour sacks and barrels are a work of art in themselves. Thank you for being my source of inspiration, modelling has kept me sane (ish) in the past few years and your videos have made that possible.

[@jovishark]

I love dioramas with a story! I can't wait to see all the details you put in it. All of those little bags look so beautifully crinkled.

[@jaykaramales3087]

Your work with the putty on the seat was brilliant. You have to be happy with the finished product--it looks exactly like worn leather.

[@BigUziVert2190]

I don’t actually make scale models because honestly I don’t have the patience, but this brand is one I’ll have to pay attention to if I ever decide to get into models.

[@utahjohnnymontana3373]

I kind of enjoy the variety of non-armor soft skins. Jeeps, trucks, etc. They help give that sense of scale. Not just size but weight.

[@dylancarson5641]

The last couple steps really made all the other methods come together well.

[@kevinfutter]

As primarily an aircraft modeller, what you achieve with paint effects alone is so far over my head I don't even know where to begin!

[@bartekstachurski3093]

I was considering getting this kit today! And here it is, a whole video about it by Uncle Night Shift! A surprise to be sure but a welcome one!

[@crtzmo]

Really cool! Very interesting to see your skills and visual approach on different subjects. Since you asked what we thought, one suggestion from a total beginner -- the forestry service mark on the door feels nearly pristine, compared to the overall ware/patina; it could just look that way on video, but some discoloration and chips on those white surfaces would have pulled me in even more. Thanks for the upload, I really enjoyed this one!

[@Chubzic.]

What I love about MiniArt (besides being a product of my Country) is how good their kits and instructions are. My first MiniArt model was also my very first full interior model (T-44 kit). So it was very challenging for me to begin with. But the instructions are made properly, so I literally had no issues with assemly. Thanks for the video and for the content, dear sir mister Uncle :)

[@fotomakr]

Wow! The flour sacks are sublime as is the rest of the truck. Like the change in subject.

[@rgj8044]

Terrific modelling! Can I challenge you for one more detail? Windscreen wiper swipe marks on the windscreen. Best regards R

[@JoshuaSuke]

❤ this. The decals on the doors, lack weathering and are slightly off putting. Looking forward to the diorama.

[@paulvanappeven3340]

Glue the Windows in after painting the model. No masking necessary. 👍🏻

[@Yves95128]

What a beautiful work of art, as always. I was thinking, a bulldozer or other civilian construction equipment would be great, imagine an old yellow Caterpillar with Martin's treatment...

[@captaintaxi6884]

I have a cold but uncle night Shift is here so light up my day :)

[@Gunpla-Slinger]

If this kit impresses you. You should see their WWII bulldozer kits.

[@seanmillette4323]

I love AK products. I ordered a few of their modeling techniques books and they are fantastic for beginners

[@javierspilere8257]

Meng also has bending fixtures. They also have tools with and without clamps if you want to use PE.

[@deweyg5377]

That truck seat is ridiculously good! Nicely done on the whole thing. Your work is always amazing.

[@calvinthomas1642]

I always love seeing your incredible level of detail. The flour sacks make me think of a certain famous airlift. One thing that I wanted to share with you regarding the detail in the cab comes from my experiences with old style land cruisers in the middle east. The paint in the footwell got so worn by the driver's feet there was a big area of polished metal below the pedals. It would be a fun detail to add in future builds!

[@panoscharalampakis4514]

These are the best how to videos I’ve ever seen so far. They are the single reason I came back to “ artistic” modelling after a very long break. Keep up the good work. They re pure art

[@valuedhumanoid6574]

Amazing. I sit in awe every video I watch. I wish I had the time/skill/patients/tools/techniques that you possess to create my own. But, I don't so watching you is my catharsis.

[@Mrdrcaptaintroy]

The AK diorama dry earth has changed my life. I use it on all my Warhammer 40,000 minis. I can't remember which video uncle nightshift used it, but it's fantastic

[@downedmushroom9659]

I have only built a set of Miniart figures, but I found that painting and detailing them was quite pleasant, so I'd definitely recommend them as a cheaper alternative for resin figures

[@ndewingful]

yesssss good things come to those who wait, and those good things are Uncle Night Shift videos!!

[@Kommander_Rahnn]

I've found that, when building cars and trucks, coloring the edges of windows black adds to the realism.

[@Quick-Silver206]

I would love to see your skills set on a train or construction vehicle. You do the most realistic weathering I've ever seen!

[@woody5109]

Personally, I love support vehicles, artillery, armoured cars..that just me, love your work.

[@davidpowell6098]

There's no need to mask the windows, the glass is just the inserts, the frames are built in to the cab mouldings. Just put the glass in last. Another excellent build, sir.

[@atrimmer3009]

Tires can be bulged to give them a weight bearing loaded look by pressing them down for a while on a heated frying pan before painting, with slight flat sanding after. Try testing it out on a fat piece of sprue end.

[@olivercooney6645]

Hb pencil over highly touched metal services is a good touch

[@gregrandolph]

The truck looks fantastic, Martin and I'm really looking forward to the diorama as well. I remember that Ball Tank!

[@WHJeffB]

Outstanding Martin!!!! Your modeling, painting and weathering is second to NONE!

[@philipbarrett3151]

Impossible though it sounds with your previous amazing work, I really feel that you achieved a whole new level with the painting here.

[@Planespotter15k]

Awesome model

[@W-Thom]

Muh Frend; Flour sacks next to gasoline makes for sick soldiers. Maybe they're sacks of textiles in need of washing? Super nice video and brush work as always, Yesyes.

[@loupiscanis9449]

Thank you , Uncle Martin . 🐺 Loupis Canis .

[@nigelsmith7366]

Fuel and flour together.... I think not... Also flour sacks were stitched closed not closed with a knot...

[@joemoore4027]

I'm happy to see you built this kit as I have one in my stash and was wondering how to finish it. The Miniart kit has a ton of very very small parts and I found you have to really study the instructions on parts placement ! As always your end result is impressive and now at least I can tackle the truck and the simple weathering techniques you give !

[@bobthecomputerguy]

The tires looks so real. Amazing.

[@sukhoisu-27flankerbdude92]

Ya know what I’m going to work on my model I probably could have finished way more than a month ago… great video

[@Losantiville]

Heavy cargo often polishes military truck beds bright. Soldiers tend to push that stuff around.

[@klarklasst6107]

Such awesome work! Loved seeing it all from start to finish. I can dwell on your fantastic paint work, but I’m pretty sure building a sound model beneath is a little beneficial. It’s all great.

[@cillitbanggang470]

Some trumpeter kits also come with the plastic bending jigs (for example any of their MAZ-543 based kits)

[@tomh2837]

Just a suggestion: how about a tank/ armored car disabled or stuck and the crew crawling out, with the opposing force(allied/axis) vehicle/troops pulled up and taking them prisoner? The disabled vehicle could have a track recently blown off, or off the road in a ditch, hung up on a stump, etc. I’m no where nearly as skilled as you are to even attempt such a build, but I love your work and the way you document them on your channel. As long as it wouldn’t bee to taxing, and in between your astronomical photography, of course. Thank you for all the entertainment, from an over the hill model builder. T.

[@skipschauer5535]

Great build with good weathering techniques!

[@beanhavok2287]

Very impressed with the seat sculpting!

[@darrinpennington]

That interior looks like many of the deuce and halfs I drove in the military.

[@kenjackson5938]

Because of this build I think I'm going to have to look into getting one of these. Id like to see you build the 1/16 takon jeep, with a couple figures, the skill would allow great details.

[@jeffreyhansen2806]

Beautiful work! However, as indicated in a comment below, the nonagon insignia on the door represents the 9th Service Command, a stateside unit. It is unlikely that it would get that weathered in normal use as such vehicles were washed frequently and repainted as needed. The box top art is odd in that it shows the vehicle in what appears to be on an ETO battlefield. Many of these were sold as surplus after the war and were very commonly seen here in the Pacific Northwest where I live.

[@markstott6689]

Perfect timing. I know how I'm going to weather the Dragon Wagon now 😊😊😊❤❤❤😊😊😊

[@christopherguy9591]

Very splendid work on this model, I would highly recommend on building the Copper State Models 1/35 Ehrhardt E-V/4 M.1917 next!

[@Dangerwiggles]

I (try to) watch a lot of modelers... you are absolutely my favorite. You are so talented and your dialogue is always fantastic. Keep up the fantastic work.

[@russellpoland6637]

A "LARGE" diorama? Very Interesting. Yes, is that not a kick in the pants when all of that detail is hidden. Most disappointing indeed. Always a pleasure to see You work, I think it is GREAT! Looking forward to the diorama! Thank You for sharing with Us all here on the tube. Later

[@thestoicsteve]

amazing looking model and painting and weathering...

[@retrorabbitstudios]

I'm going to be watching this vid 30 times over as I build my truck kit :)

[@JorgeRojo-ti6bg]

Dude, impressive work! I love the way you work around the textures and shades, telling the story of the model by the level of usage or damage. I'm an animator (2D/3D artist) and recently got a commission on making a set of vehicles from Angola's Bush Wars / Operacion Carlota. I discovered your channel while looking for tutorials, and I'm amazed. Hope to be 1/10 as good as you are in a future.

[@isisnmagic1812]

Great video as always, a tip for masking windows I find on my aircraft's is a bigger size tape or liquid mask from Vallejo.

[@BagelBricks-p9n]

the leather seat looks insane, good job

[@deanlewis8083]

beautiful work!! i build mostly model cars and occasional armor and aircraft and sci-fi. I love your tutorials and how I may apply techniques to what ever i'm building.

[@georgebernard8983]

You never fail to impress!! Beautiful work!

[@jakejacobs7584]

You have incredible creativity and skill for this stuff. If you could also perfect door dings and fender dents that would be unbelievable !