Let's go edging!

[@markrskinner]

Has anyone asked "Mike, I have a question. What the heck is edging?" :D

[@kcgibbs]

Edge is a herbicide.

[@markrskinner]

Some long time viewers will get the joke.

[@benpattinson1]

Was tempted to suggest “google it” 😂😂

[@kennysteele8074]

Nothing like edging and I ain't a farmer

[@spukduk5632]

Love me some edging😏

[@jacobotes8443]

Hey mike. Congratulations on the new little tractor driver. Would you mind sometime showing what you do and dont use with your raven screens? I am new to spraying and would like some advice from someone who use the stuff and don't sell them...

[@loord617]

Mike i have a question. With your farm how big it is, do you forget where your fields are? do you have some sort of google map with all of your fields ?

[@braderwin937]

40;000 thousand acres

[@crandonborth]

I would say more like 50,000 they just got more land recently. All the field are mapped with field view a gps system that keeps track of yield, chemicals applications, and location

[@gavinperry7237]

Dougo has a pail of water mounted on the front of this tractor to wash the windows on the Larson Farms equipment. You certainly could use some of the moisture that they are having to deal with.

[@sdaldridge]

I like watching you use older equipment and especially how y’all turned a packer into spreader(spread chemicals). So, what was the issue with the oil? I missed reading all of your message.

[@gilb6982]

When you encounter a big rock in the field can you indicate this on your tractor GPS ?

[@douglassmith7515]

U should carry a garden sprayer with washer fluid and a long reach brush for the windows

[@joshuagolden6025]

Your hydraulic oil issue I would think is a bad hose tip or coupler o-ring that contacts and seals the tip on the tractor outlet. Oils getting past the tip and flooding the others through the drain line that hooks them all together to catch the oil when you unhook the lines. Partially a guess, as I don’t know Fendts, but seen it on my Deere’s.

[@johanvantrier]

We're living on the edge........

[@lt1nut]

Come now, you're just being crabby.

[@greenthumb6875]

My hands hurt watching you handle cables without gloves..

[@lt1nut]

In my experience it's Russian roulette for the hands when the cable is used for towing and recovery. Maybe it doesn't fray as often when loosely coiled, seldomly used, and only under a very light static load? 🤷🏼‍♂ It being dry and not oiled must also be a huge blessing when one forgets their gloves.

[@kingofrivia1248]

You know im a farmer but i have no idea what you did in this video.🤣🤣😂 atleast at the start.

[@FoodwaysDistribution]

When you have emptied the bag why not reverse the tractor all the way to the trailer with the empty bag on and pick another full bag

[@grand7777777777]

Can confirm you coulda been sledding last week or two weeks ago in the right part of Sask lol

[@sdaldridge]

Oh yes, I am surprised at how much you get done using one hand. Great job.

[@tigerdefensesystems]

Russian Thistle? never heard of that cause we only curse out you Canadians thistle in Ohio.. so I did some research, turns out our term "Tumbleweed" for Russian Thistle in the lower 48 mostly lol.

[@dtktrucker]

We call your “boomer”a “lever binder” in the states. And that’s lever, not leever. Lol

[@mikemitchell2554]

Ha! That's very interesting! 🤔Haha

[@jimmytreadway3195]

always called it a boomer here in the mid south

[@maxpower9499]

@@jimmytreadway3195 Boomer in KS and CO.

[@boltactionshooter]

I feel accomplished. Not only do I have a white Duramax (although it is an 2004) with a diesel tank in the bed ( although it is 100 gallons instead of 200) I also have the exact same Diamond C trailer!

[@mikemitchell2554]

Nice! 👌🙂

[@ethanetter9075]

I really like how you mentioned group rotation. Great way to reduce any resistance!

[@mikemitchell2554]

Absolutely

[@ITubeTooInc]

Mike I have a question: Why are you running the edger with two output booms missing on the right side?

[@peewee.3138]

The nozzles are in at the main box beam, not out on the booms- they were from the harrows

[@rubenbraekman4515]

The zoom on your phone is AMAZING Mike!

[@kopenhagenkid]

Great video Mike good luck edging

[@SuBbaas]

Mike got a little edgy at the end obviously.

[@powerminescrypto]

Are you going to put a car seat in the tractors

[@kenn3805]

Mike - When does Chapel get his first Tractor Ride ???

[@gregsmithets3659]

That fendt is super quiet…….how do you like it for loader work??

[@perplexed2352]

This was not the type of edging i was hoping for

[@jamesv1277]

Hey Mike, we just bought a 2021 case 310, the new pro1200 is way better that the pro700 on our 620 quadtracs

[@gavinperry7237]

Hopefully you carry a few extra cotter pins with you because when you unhooked the clevis to attach the cables you came very close to dropping the cotter pin down a gopher hole. It's not like you only have a few gopher holes to watch out for. 😂🐀🤣

[@mr.electric8559]

Why come back to pick up a rock? You got bucket of that oversized tractor. Maneuver that thing 5 feet and it's handled. What am I missing?

[@themoo908]

How is the new little one doing?

[@NVMDSTEvil]

Hook a couple old frames together, edge at 500ft per pass!

[@spideybrent]

Hello from Yorkton, Saskatchewan, Canada. Thanks for sharing your great video’s please keep them coming.

[@kenhofer8063]

Time for a new comment

[@Len_M.]

Your Family into Chuckwagons?

[@jakefalk3667]

Any idea why the commercials are in French?

[@smockfarmer]

Just an EDGE above the rest 👍

[@ashleythompson5550]

Congrats on new baby

[@brettengland192]

80 acres/hour! That is phenomenal. We used to drill wheat and plant corn and soybeans, six rows (30 inch on center) at a time and were lucky to get 40 acres done in a day.

[@TheRealJesseStoltzfus]

Mike, Mike, Mike, where’s all the trees?!?! 😂😂😂

[@mikemitchell2554]

They blew away! 😆

[@cerberus0413]

Does anyone know what brand of work pants Mike wears? They look like a decent heavy duty canvas with good pockets.

[@gavinperry7237]

cerberus413 Can't remember the exact brand but he buys them in bulk when he is over in Germany. I get the feeling from his previous comments that for various reasons it is not practical to have them shipped so he personally picks them up.

[@rudigerhartig6697]

Engelbert Strauss

[@892guns]

Guess the hydraulics dont like the cold. When I worked at the airport, our equipment hated the cold. Everything would leak every where. Name any fluid and it would leak.

[@farmerbill6855]

The word you were looking for is fulcrum. And, Google says edging is something completely different.

[@PeterIJmker]

Hey dear Mike is edge not harmful to your body? you don't wear protection against the dust

[@55player66player77]

Wie wirk das Herbizid das Mike ausbringt?

[@crandonborth]

Ok Mike I have a question? Have you came to the lower 48 and if so would you do again?

[@howardrich408]

Edges is herbicide I didn't quite understand what you were doing I had to look up edge and I found out it's a herbicide that you use up in Canada

[@jayhuff4674]

How much horsepower does it take to pull an 80fy harrow

[@RedRiderrrrr]

Whats wrong with the spring-loaded autofold?

[@privateeye242]

Mike, you don't have to hate cable's when you roll them out instead of pulling them. You get knots when you do the latter. Remember any cable you use roll it out. No knots guaranteed!!!

[@thomasleonard1846]

4 wheelers and shotguns! Let’s go rabbit hunting!

[@olenilsen4660]

So, Mike - I have a question: How come you never got your head out of somewhere and buy a GoPro with a harness, so you can use both hands? Other than that, thanks for another fun video. You should try these operations for smaller fields, like our 0.1ha norwegian fields. Count yourself lucky as you can go a few hours on the same field after an operation like this.

[@farmcentralohio]

Mike has said before that he has no time to keep track of a go pro. Since he always has his phone that's what he records with.

[@olenilsen4660]

@@farmcentralohio Yeah, now that you mention it, I think I've heard it too... But when he complains about how hard it is to film with one hand and work with the otger, I couldn't resist....

[@farmcentralohio]

@@olenilsen4660 I know, I think the same. It would be easier in a way for him to use a go pro but being in so many places like he is keeping track of things, making sure batteries are charged. It would be to much. I;m lucky if I rember to charge my phone at night lol

[@vxnova1]

@@farmcentralohio there are so many people complaining about go pros though, just turning off randomly, no sound, corrupting cards, etc I don’t believe I have heard mike having that issue with the phone

[@jameylapping5948]

Let's go Brandon

[@wilsonsmith69]

Mike, If that is the new edge formulation that does 100 Ac per bag you have to set the Valmar to the Avadex setting because the bulk density of the product has changed.

[@mikemitchell2554]

That is very good information!! I noticed it was going on light!

[@bobwest2807]

@@mikemitchell2554 That would make a 4B setting with the same cogs.

[@wilsonsmith69]

@@mikemitchell2554 Keep up the good work 👍

[@alltree78]

Little angle on the dangle.. thats what i call something like that chain bracket dohicky lol

[@alanellis9158]

Was the white jackrabbit not a hare? thats what we call a mountain hare here because their coats turn white in winter so that they can hide more easily in the snow on the mountains.

[@maxpower9499]

What made the hole in the ground by the wheel at about 2:43? Would be a tarantula where i live.

[@matthewsmith9624]

Ever been on urban dictionary? Sounds Suss!

[@robertfranssen]

Nice avatar Mike .

[@Lukelins1]

Like in the beef plant were we do a chemical ration.

[@youknowmyfirstlastname3206]

It's 4 what?

[@ldtenenoff]

SO at 11:18 did u get ur hitch pin off the ground ?

[@Lukelins1]

Those are not pins, those are finger smashers.

[@benpattinson1]

So Mike I have a question, if you’re putting granular chemical down now and you’re in such a windy place, is that the potential for the edge chemical to blow in the dust that the wind carries across the country?

[@mikemitchell2554]

It would could a little, but it wouldn't take much moisture or humidity to stick it to ground in my opinion 🤷‍♂️

[@andrefilipefarias1615]

Hi Mike just to let you know if you read this comment tell your subscribers to turn the bell notifications off and then back on because I noticed I have been missing lots of your videos because KZbin doesn't let me know you have new video posted thanks sorry for any inconvenience

[@andrefilipefarias1615]

Just for fyi I'm watching from UK

[@errolsigue4419]

Hey I want to come out there and see that

[@kevinknoff9809]

Whats and edger do? For what?

[@tomchaplin4372]

NOT WATER SPRAY BUT DUSTING

[@j1d22]

eradicane applied with air ?

[@lordzeke7307]

What a poor chart placement

[@ReolSPro]

don´t breathe that in lol

[@fishingdad7887]

Snow here

[@darrenlord5439]

Bissey as allways

[@billwaller5611]

D

[@recklessbehaviour01]

Morning

[@EFCasual]

Jackrabbits look enormous compared to the little rabbits I see.

[@waynedub1167]

It looked to be about the size of a baby goat

[@max-jc4wq]

they are a lot bigger

[@larrykluckoutdoors8227]

👍👍👍👍

[@claytonhofer4592]

Y don u spay it

[@max-jc4wq]

its a granular

[@conradhofer9302]

Edge is cheaper and maybe more effective....

[@bobwest2807]

Hi Mike. Do you ever shoot any rabbits and other pests?

[@ATLS_gaming]

I'm finally back!

[@verlinswarey507]

Thank the lord and whatnot!

[@verlinswarey507]

Thank the lord and whatnot!

[@tomchaplin4372]

use your plane to do all your fields . quicker and cheaper MIKE

[@max-jc4wq]

To spray them? That would probable be slower and way more money.

[@Danny_Don1]

Hey Mike When you gonna buy new tractors?. like claas xerion new fendt's

[@timansorg9594]

Why would he buy a Xerion

[@Danny_Don1]

@@timansorg9594 It's working hard to make your job easier.😜

[@timansorg9594]

@@Danny_Don1 maybe but since he isn't happy with the way the 1050 pulls it does not make sense to buy a similar sized machine

[@max-jc4wq]

@@timansorg9594 the class tractors are just bad. Ive drone 2 of them and the both where not the best.

[@sgtpekka]

Let’s go Brandon?