LET'S LEARN HAND POURING! Introduction To Hand Pouring Soft Plastic Baits

[@WorldsWorstFishing]

Do you prefer hand pouring or hand injection?

[@nimmimankame8727]

World's Worst Fishing both 😂

[@Darkman-Fishing]

I do both, I started with hand pouring found that they both have benefits and advantages over each other but I have fun with both.

[@garybowers9605]

I mainly do injection pours, some hand pours, but normally I'm only pouring one color.

[@edwardlo18]

You should make some underwater action vids to see how they swim

[@WorldsWorstFishing]

@@nimmimankame8727 good answer

[@derekbutler816]

*Found this through a KZbin video **enjoyable.fishing** recommend does exactly what its meant to do. Very durable and no hang-ups at all surprisingly*

[@ReelDealOutdoorsTV]

Glad I found this. Got myself a hand pour craw mold to use up the leftover plastic from my injecting. I suck at hand pouring right now lol. Glad to hear there’s a learning curve and it’s not just me.

[@WorldsWorstFishing]

Major curve!! I'm much better now but it's hard for a while

[@615installations]

What a fascinating process; thank you for sharing how this is done!

[@92548dannyt]

Quite frankly I like a little of both. For example, I like split shot shads and large 8" worms hand pours from the master Paul Paul Krew. On the other hand I use Senko style baits Injected by BIG DAWG Baits of Florida. Believe me, both work very well here in Calif. But I love learning about making plastic baits from you. Happy New Year to you and your family.

[@WorldsWorstFishing]

Krew is a titan in the home tackle craft world no doubt! Happy new year as well!

[@harrisg00]

Wow you never hear anyone talk about Split Shot anymore. Before he died I used to pour for Dick Trask.

[@johnwanderin2524]

Makes me wish I still had my Creepy Crawler molds from when I was a kid so I could make some little hand pour beetles and spiders that my 5 year old cousin could use when I take him fishing with me so he can get into some panfish or trout

[@capnrob97]

Creepy Crawlers were great! I may look on ebay to find one. I guess in this day and age hot aluminum molds and plastic are too much for kids to handle safely.

[@Progressunlikely]

Creepy crawlers nostalgia also got me here.

[@jamesneal6537]

EITHER YOU DO THE UP MOST BEST. I FOLLOW YOU ALOT ON KZbin your a artist with plastics.

[@mikedove7541]

Very Nice !! Travis and Stanx are awesome !!

[@WorldsWorstFishing]

Yes sir..he is doing some awesome things!

[@coloradodirtbike5930]

Sweet looking plastic baits. I would buy some of those 👍.

[@davemartin8684]

Great video, thanks for making me spend more money on molds.Keep them coming.Hope you and your family have a great new year.

[@WorldsWorstFishing]

haha..happy new year as well

[@the-boogeymanofbruce6424]

Just about to get into making my own soft plastics and want to try both. got an injector, plastisol and some molds and other stuff for Christmas, I'm looking forward to getting started.

[@A.Blair_Fishing]

Your channel is a go to for us in our learning process. Thanks for the tips!

[@WorldsWorstFishing]

You're welcome

[@caseknifes]

Great job. I am now pouring some open molds and its fun. Thanks for today

[@hillbillybassfisherman8181]

I finally understand what people be talking about flashing I bought a cheap mold that you have to use c clamp lol I always just used the wing nuts comes with the molds I have never had that before you cant even with c clamps put a lot of pressure on them

[@jimjohnson1944]

Great teaching job, I'm just getting into making my own baits and really enjoy your videos

[@pimpshack81]

I love those

[@b.j.harris9109]

Sir your awesome all your baits you do they are great I love your work I cant wait to see more of your baits you do thanks for all you learned us and can't wait to learn more thanks and appreciate it hope you and yours and the new baby had a MERRY CHRISTMAS and a HAPPY NEW YEARS

[@garybowers9605]

Another great video. Looking forward to seeing how you do some of the complex pours.

[@WorldsWorstFishing]

thanks man...we will dabble in some complex stuff in 2019 no doubt.

[@daltonhuntington8860]

I have problems with my layers separating on my open pours, what could I be doing wrong? Love your videos.

[@kayakingwithkevin303]

Do you need to lubricate your silicone molds before pouring?

[@RodrigoSantos-of1kf]

Congratulations friend your vídeos are Very good these bait are very good for some fish here in Brazil.

[@WorldsWorstFishing]

thank you!

[@hillbillybassfisherman8181]

you are right this more a hobby way to do plastics its hard to take up so much time with baits to try to sell them

[@A.Blair_Fishing]

What silicone do you prefer for this process?

[@danabellefeuille8485]

could u imagine make a mold with the plastic mity mite,, those plastics work awesome on crappies

[@doghouse551]

Might want to get some hand pore pots work grate !! but I have used cups in the past.

[@Reelsimple_fishing]

How long do you let the first layer sit before adding the second layer?

[@brentlongfishin4770]

Awesome job as always Chris. I would love to see you do something in the zoom Tennessee shad color. I'll buy whatever it is from you. How do you go about finding the color recipes?

[@danabellefeuille8485]

wonder if u could stir in some sparkles in ur clear dip,, then hang to dry,

[@angelaabrams9108]

"Today we're going to be making black and white swim baits." Makes blue and white baits... Joking aside, nice demonstration. Just getting back into fishing after moving to the northwest, and I hadn't even thought about making my own plastics. Guess that's one more thing to add to the list of stuff I want to try out.

[@basscatlildave]

Your hand pours look great. What dead I’m plastic formula was that?

[@daxtonashby6547]

Sick vid. Love the soft plastic videos

[@WorldsWorstFishing]

thank you

[@dontgiveabucktv656]

Hey love the channel! I bought some stankx molds and I was wondering how long it normally takes to get them? Sorry I'm super impatient. Oh yeah you have definitely improved

[@kennetnielsen5196]

Do you use a heat resistant silicone for the mold?

[@TooFreshFishing]

Sweet vid Chris. Did my 1st run yesterday. I have both of the ones that you showed. I call them Ugmo and Ugmo Jr. lol because of they look so darn ugly before you add the eyes. Loved the blue in these.

[@WorldsWorstFishing]

haha well I think they look good still, but the eyes finish them off.

[@onetakestraighttalk3585]

Yes they do lol

[@richardorta8960]

texture additive ideas Saw dust dryer lint did i mention using those pesky pine needles?

[@masonmc23]

Nice video! I have learned so much from your channel.

[@WorldsWorstFishing]

Thanks man..I am learning myself, lots to figure out still

[@SM1CKSM1CK]

We’re can you get the big swim bait moulds from ?

[@texasmadeftw111]

Did you have to put mold release ?

[@jacobfielder4150]

Hey Chris, I just got into pouring baits and just have a Stankx swimbait mold. I am having trouble doing the laminates. Half of them try to separate near the tail. I try to use a grill lighter to warm that part up before pouring the second color. I am using Dead On plastisol too. Any tips on what I could do to get a better success rate?

[@NobodyWhatsoever]

I'm kind of thinking you could use the blood lines mold to make red or black sticks, or a narrower stick worm mold for similar. You could cut them to short lengths, the width of the pour mold where you want them. Then, you pour the bottom of the mold, add short sticks, and pour the rest for shad spots and eyeballs.

[@kaiichinaga1495]

would you recommend the 6 inch or 4.5 inch open pour mold for the ribbed swimbait?

[@mikeheckathorn5692]

Love the video. Tha l you for the good tips. Got a hand poring kit for xmas. Things were going good tell I overheated one of the plastics and it was full of bubbles. Lol. One of my laminates delaminated. I think I let the first one cool off to much.

[@WorldsWorstFishing]

Yeah they will delaminate unless you hit it just right...all part of the learning curve, which I am still learning

[@idahofishgamer3560]

Can u use acrylic paint

[@jeffeffinger1468]

I like that mold but I can’t find it on the website

[@jasonclark2571]

Great video thanks

[@mlenz2553]

How are these stankx on the water. The ribs have me curious, but I can't find any reviews. I'm looking to start making some swimbaits for the bay, since I go through 3-4 a week.

[@brodymitchell4891]

Where did you get the poor from couldn't find it on the link in description

[@bicalipierfishing8951]

I have thes swim bait with the ribs on the bottom but in all white

[@treasuremaze]

Thanks for all your videos.. I really enjoy them. I was wondering where you get the bags printed with your logo on them. They look great!!

[@WorldsWorstFishing]

they came from hong kong china

[@harrisg00]

I'm already hand pouring baits using the Lees Production Pots. The plastic I'm using is from Lure Craft. My question is can I pour these Swim Baits with t5he Lure Craft Plastic?

[@romelgarcia8066]

Hi. Been following you. Thinking of making my own lures. Never seem to find the color combinations I want. Would like to know what molds your using for the jerk shad or fluke lure.

[@MrAlbeanz]

What temp do you do your clear dipping ?

[@WorldsWorstFishing]

i like it hot..350 or higher so that it doesnt clump or add too much bulk.

[@MrAlbeanz]

Thanks bud

[@Jacob.Hensley]

Where do you get the bags you put your baits in?

[@jamesneal6537]

👍👍👍👍👍👍👍👍👍👍👍👍👍

[@georgekeary1101]

Where can I find a pyrex divider for swirls

[@shephardofdeath7172]

Where do you get your supplies?

[@caseywallace2240]

Im assuming you flip yhem over and clear coat the tails too?

[@WorldsWorstFishing]

I do not..I don't want to add Mass to the tails..less action

[@caseywallace2240]

@@WorldsWorstFishing pretty smart. Wpuldnt have thought of that.

[@semoscratcher5884]

You should consider getting some stickers and decals made buddy I know it would do you even better marketing at a minimum good luck 🍀 to you either way and thanks again for sharing too I’ve really enjoyed your information as well as the entertainment.

[@ChrisBrown-jr8oc]

Where can I get that mold that you are using in this video? I went to the link, and it only has a 2 cavity mold.

[@elijahkaehler9369]

I'm sure u already figured out the different but Hotter - less viscosity Colder - more viscosity (Think of honey, cold/room temp honey is very thick (or viscose) but when u warm it up on a stove it becomes more runny (you heat up honey on a stove to make a bochet Mead which basically means cooked honey or caramelized honey)

[@byerboys2607]

Ahhh the hand pour mafia in the house lol great vid man love hand pouring

[@byerboys2607]

If you don't send lfg some of your baits iam gonna be a tad salty lmao

[@WorldsWorstFishing]

haha yeah I need to..He's all Googan Baits nowadays but I'm sure he could use some sick handmade stuff haha

[@hillbillybassfisherman8181]

I always loved hand pouring I don't like perfect bait my son calls me the ONE HIT WONDER heheheheh but I do inject now some baits like senkos when you go through 20 a fishing trip

[@badfishrising]

I tie flies as well as inject plastics its always the one hit wonder that bangs when it comes to steelhead flies.

[@tphvictims5101]

Bass fishing training which is cheaper?

[@hurley2301]

You ever add scents to your plastics? IS it hard? Do you need to change the materials used to get the plastics to absorb the scent?

[@WorldsWorstFishing]

not at all..i squirt some scent in the bags and done.

[@hurley2301]

@@WorldsWorstFishing Thank you! You have no problems with the scents penetrating the plastics?

[@ZZ430T56]

Those Lureworks eyes are actually made from Plastisol. You use Mend-it (or Lureworks has there own liquid). That will permanently adhere the eyes and no clear dip is needed.

[@WorldsWorstFishing]

Yessir...I just much prefer a clear dip on these ribbed baits.

[@deathbyhook]

What eyes do you recommend?

[@bryanhoadley1252]

How is the action on these, is it just tail action or body action like the ai mold?

[@WorldsWorstFishing]

it wobbles side to side like most swimbaits...the ribs I think make it wobble pretty good.

[@bryanhoadley1252]

@@WorldsWorstFishing thanks

[@robertkennedy8828]

Im just getting ready to start hand pouring and I have a vacuum pump and container should I vac my dead on plastic before I heat...my feeling is it can't hurt

[@WorldsWorstFishing]

Can't hurt

[@TritonTr20x]

How can I get in touch with you about making some plastics?

[@stephenhusak6098]

Whats the mold for that big swim shad?

[@thejackalofdarkness]

How do I enquire about some oracle lures' worm like you had in the beginning? Just curious..

[@WorldsWorstFishing]

Find Oracle Lures on Instagram and message him, that is the best way to buy his stuff. They are TOP NOTCH baits.

[@Tessa_ract]

Nice

[@allsnaggedup7922]

How’d you get 5 cavity. I only see 2 cavity in that size

[@WorldsWorstFishing]

This one was custom made a long time ago

[@allsnaggedup7922]

@@WorldsWorstFishing thanks for the reply. Question 1 did you make the mold? If so is there a video you have on how you did it?

[@tphvictims5101]

That particular pattern, how many would a person have to order before it was cost effective for the customer? The sexy shad looks interesting. How about them?

[@WorldsWorstFishing]

cost effective for the customer?? or for the bait maker?

[@texasmadeftw111]

Is there a starter kit of some sort?

[@WorldsWorstFishing]

i think do-it has one..im not sure

[@jbjgibbons]

Thanks dude. This was just the info I was looking for! I’ll tell you what’s not suave though. Your bunched up hoodie. Fix your hood Timmy. You in third grade? Lol. Just messing with you.

[@hillbillybassfisherman8181]

I want to see video of your personal colors an the baits with video clips u catching bass

[@WorldsWorstFishing]

Check out the video before this one..I'm tearing the bass up on Alabama rigs with my own stuff.

[@semoscratcher5884]

Hello buddy I really appreciate you sharing your information with us it’s very helpful. If you have any stickers or decals about your business I would really enjoy having what ever you want to send to me. Thanks again and keep up the good work !

[@WorldsWorstFishing]

hey man, I dont have any stickers actually, thanks for watching the videos

[@tykekozeal4596]

How do you avoid air bubbles in the ribs when you clear dip them?

[@WorldsWorstFishing]

not really sure, I use the dead on plastic worm blend for dipping and it comes out really well.

[@Kozeal24]

World's Worst Fishing I use dead on as well I might try to dip in hotter plastic! What temp are you dipping in?

[@coastallures1417]

I always find it easier to mix the pearl powder after I cook it.

[@WorldsWorstFishing]

Complete opposite for me..but it's better habit doing it the way you are I think.

[@coastallures1417]

@@WorldsWorstFishing when I dump the scoop into the pyrex I'll take my knife and flip plastic over the pile of powder. I'll lightly stir it only towards the middle, if that makes sense. After that it blends in perfect.

[@WorldsWorstFishing]

yep, I do the same thing most of the time if I have to add powder to hot plastic.

[@RAarts-ri9vc]

Make green with blue junebug thats like me cool👍

[@jacktrevino5412]

You should do a lure asmr

[@coleritts4901]

That blue highlight really shows up! Me and my tournament partner should be able to start hand pouring AND injecting by Monday. If anyone has any tips, they would be greatly appreciated!

[@WorldsWorstFishing]

biggest tip...do it safely lol

[@coleritts4901]

World's Worst Fishing considering we’re talking about 15 year olds, that’s great advice 😂😂

[@coleritts4901]

World's Worst Fishing considering we’re talking about 15 year olds, that’s great advice 😂😂

[@therealginger211]

You should go fishing with the sprew

[@WorldsWorstFishing]

now that would be a challenge!

[@huntersmithfarmboy8165]

You at spired me to try to make my own soft plastics you are the best of making soft plastics and are doing neat and cool different mix colours me and my brother like when you do soft mix plastics so do you think that you can make green and red soft plastic fishing Lewers

[@raywhite2696]

Watch the for the second or third time not sure

[@danielbeavers8701]

I have to be honest these baits look awesome and would catch a hole lot of fisherman. But i don't think the colors are that practical. Maybe in very stained or muddy waters. But they look a lot like China baits. Not as far as quality but as far as the very different colors. But i would definitely get into collecting these

[@hillbillybassfisherman8181]

I just never sold baits cause of patients in this country u can loose everything ever worked for

[@stevefisher2553]

Suave!

[@produc3d]

LOL you should NEVER have to trim a hand pour. Don’t give others who are just getting started the impression that’s okay. Keep practicing.

[@WorldsWorstFishing]

Well we can all dream on of that..guys I know 16 years in the game still have trimmings on smaller pours with narrow extremities.

[@produc3d]

World's Worst Fishing first let me apologize. I didn’t mean for comment to sound so rude. After reading it back I sound like a big jerk. It was not my intent to come at you with negativity but more of what not to do. Personally, I think trimmed baits look unprofessional and make buyers hesitant on purchasing. All hand pours I’ve encountered and purchased don’t even look like hand pours at all. That’s how good the bait makers are. I make baits too and I never trim simply because my pours are on point. Occasionally I do mess up but there’s an easy way to fix it as if nothing happened at all. When I said keep practicing I just meant that it can be done and to keep at it until you get to that point. Again sorry i sounded like a jerk. Sometimes hard to convey through a message.

[@WorldsWorstFishing]

@@produc3d didn't think you sounded rude at all, I've been actively hand pouring for a little over 2 months, I don't expect perfect handpours and infact the imperfections in a hand-set open pour mold such as these is what I find attractive. The video was titled about learning handpouring rather than how to make perfect handpours, which I am a long ways from.

[@saintsfisherman]

"handle the larger cups." , Okay, I'll stop being childish and get back to the video.

[@badfishrising]

finish the bait you set aside the fish don't care as much as the man

[@rednoize4391]

I appreciate your time making this video, very informative but you say UM way too much...