Let's MOD: Rear-loading RIVAL Revolver (Dart Zone APEX Mod) | Walcom S7

[@WalcomS7]

Last chance to get your name in GOLD on the workbench! $5 or more Patrons before the end of January 31st are Founders and their gilded names will be emblazoned across the table for all to see, anyone after that will be in black! www.patreon.com/walcoms7

[@shockingcandyskull3224]

walcom you should make that apex shoot half darts

[@Buxt8224]

You know, that the fact you goof up mods sometimes is the whole reason I watch your channel. Very few of your contemporaries have the balls to show their failures, and therefore show their humanity. I find that I learn more from your channel than any other. For that I thank you

[@heyitsfranklynn168]

(Dremel wheel starts dancin) "Hold on Anakin, youre going to get us both killed!"

[@joshua5483]

This is what the overwatch revolver should of been :/

[@gamerguy425]

it fucking kills that they were so close to doing that. even if the cylinder only like 6 rounds, that would have been 10x better than what we got

[@CaptainResident]

They couldn't have really done this with how the thing is formed. Yes, it sucks that it's only a one-shot, but keep in mind that they're essentially given a model from a game to work with and not much else. Making it like this and having the proportions the same would make it comically huge.

[@samhammersley4366]

Init

[@nicholasmazzarella2720]

WS7 Totally cool mod. Great work. Thanks for doing all the thing you do for the hobby. Keep you the great work.

[@gunslinger4104]

Walcom you change my life a few times but this is the game changer of nerf rival.

[@counthellstrom2673]

Just a thought, could you enlarge the holes in the back of the barrel then add some rubber washers to create a better seal?

[@PeterXChhanX]

There are some modders out there that just completely remove the padded seal on the plunger tube and put an entire padded sheet on the rear surface of the rotating cylinder instead and just cut out holes as wide as the holes necessary. The theory is that the multiple padded areas wear slower than just the one on the plunger tube that would make contact many more times than the cylinder ports would

[@mechman3521]

Can this be the Kronos killer? Nah I doubt it, can’t beat speed loaders.

[@supahvaporeon]

If I ever get an Apex, expect a tripleshot style barrel mod to it. You can brace the section between the teeth of the rotation mech and the cylinder, basically allowing you to remove the need for the front arm without any potential hiccups. Now to also make a cylinder that accepts spring thunder shells...

[@Matt-md5yt]

thanks for this one buddy. I needed this. you made me feel better

[@rogerramiussergeialexander5541]

The next logical step would be to make it a lever primed mares-leg-revolver, instead of having that awkward top slide.

[@redroyal4287]

someone should make a 3D printable guide to cutting the cylinder

[@cabe_bedlam]

If you can, look up step or christmas tree drill bits. It would have 100% made that job about 10 seconds a barrel.

[@WalcomS7]

I would need a drill for such things, which while on the list hasn't been a big concern.

[@ValTek_Armory]

I'll have to make a piece to make loading smoother. Perhaps a printed part to just glue to the left side of the Shell

[@WalcomS7]

Yeah just a little slanted thing would work good.

[@EDSKaR]

a track and a lever. track makes sure the ammo is lined up for the speedloads. lever makes sure it doesn't load too far in so you have (possibly) more consistent power.

[@firstlightangler6049]

Now I have to buy one just to do this mod. I didn’t like the front loading and I was in the fence about it. Never mind, that’s beyond me lol.

[@wadekirby8575]

Did you remove the AR? If not the low FPS shots might be from the AR not disengaging completely because the round is to far forward. I am going to get one of these and make a half funnel, rear loading ramp. (And perhaps widen the seal on the plunger tube.)

[@WalcomS7]

Got a point, didn't even think about that. The seal is definitely still a concern with those wider holes, but that definitely has something to do with it. I didn't even think about there being an AR because most DZ blasters don't have them.

[@wadekirby8575]

@@PirateJohnson That is an interesting idea. That way the cylinder alignment would be less critical. (It could be just what I need on the cycloneshock I'm rebarreling to rival.)

[@i8_ur_dog46]

This must be lord draconicals favorite revolver

[@GlowRiderzEntertainment]

K26 time or k25 And tape around the o-ring and possibly air restrictor removal

[@voxparadox5625]

Please for the love of God turn this into a colt 1886 single action army

[@GummyBearRacing]

That intro was neat.

[@dr.jex___]

I've got the front half of a maverick I KNOW WHAT MUST BE DONE!

[@chanaaden8310]

Dr.Jex___ what?

[@darklordofsword]

I think I know what's wrong. That white spur thing you cut off helped brace the cylinder axle and keep it centered. Without it, it wobbles a bit and that's why the seal randomly won't work. Maybe add a rubber gasket at the base of opening of the plunger tube?

[@WalcomS7]

No, it was definitely because of the AR. That spur doesn't cause any flex, that point is screwed into the shell.

[@CelticViking57]

$10 beast. I'm excited

[@crimsonbisoninc.5523]

Makes me wonder if cutting slots in the barrels would have worked better

[@pickaxattacks1879]

Good concept

[@zeroblade6599]

So which would be better for this mod, apex or cycloneshock?

[@vincentstefanelli2556]

ITSA ReBallVer!

[@jdmproductions8989]

Works pretty good!

[@odin5054]

This is awesome..

[@shockingcandyskull3224]

is there a stream tonight

[@WalcomS7]

Saturdays.

[@LeSpade72]

where do I get one

[@kennethperkins3645]

Welcome to episode 1 of How Did I Get Here

[@fyodorvoloshin568]

I wonder if Captain Xavier is watching this and asking if...

[@EDSKaR]

So... When someone enevitably makes a 12.7mm conversion for this, rear loading and,like, 12 barrels,big ole spring and long barrels. the original size of the air hole at the base of the revolving cylinder looks 'sorta close to' 12.7mm dart size, so you wouldn't even worry about sealing. Now I just got to figure out how to smuggle one (or 5) into this country.

[@jamess7140]

Just a thought but hammershot drop cylinder mods use magnets and get rid of the front post. I know how much you hate the hammershot but if you were able to combine a 3D printed cylinder for short darts with a magnetic hot swap system you could get a fairly high capacity quick reloading blaster.

[@MishraArtificer]

Mr. Heathpants already did that with a Hammershot a few years ago.

[@jamess7140]

MishraArtificer I know, I failed horribly at making my own version of it but the problem with the hammershot is that it’s difficult to get lots of power out of one. Done right while using this blaster you could potentially get something approaching kronomag performance, something a hammershot will never be able to match.

[@friendlymaple5961]

Can any one help me install a pump grip and half a half dart mod kit for the retaliator

[@captsomeguy1]

Big plunger tube? $10? It sounds like a fun, cheap blaster to try and Chris-Cartaya the crap out of it and get 200+ fps. That orange thing in the front might get in the way, but turning it into a single shot monster is still viable.

[@TheOnlyPedroGameplays]

That is awesome

[@SiliconeSword]

Could you try a large color contrasting piece of sheet metal or something similar [preferably white] and mow a strip of your yard going to the target??????????

[@user-sc4uc2nt3v]

Nice mod :D

[@i8_ur_dog46]

Can it take a k20

[@samhammersley4366]

This is a 6 shot Mcree revolver

[@carlosc3899]

Hey walcom can you cut down some mega darts and see what kind of performance you get?

[@WalcomS7]

Watch my original review, without a rebarrel they don't fit.

[@ClassicRedEye]

most of those shots were hitting the chrono

[@larce4158]

Rebarrel for stefans when? :))

[@dodson43]

Yeah but the real question is can it take a K26 spring?

[@Nathan_Talisien]

I think K26 might actually be too *small* - unless you dremel the plunger rod down a bit thinner, that is. I think K25 might be a better fit. I could be wrong, though. I'd say I'm... 60% towards K25, 40% towards K26... And 15% towards some part of the mechanism being unable handle EITHER upgrade for long without reinforcement, lol!

[@curtisfoster8291]

What time is the stream?

[@WalcomS7]

6PM PST, I'll set up a notification here shortly.

[@curtisfoster8291]

@@WalcomS7 ok perfect tgank you

[@owenreynolds9599]

Ok that's pretty cool, nevermind very cool

[@raid7610]

Rival maverick

[@shockingcandyskull3224]

oof i thought it was saturday

[@zboy-qm7hr]

I’d do the same, I’d grab one and make it a half dart shooter.

[@Daniel_B79]

I love you walcom but I don't really think that that's an improvement.

[@WalcomS7]

When you remove the FPS irregularities because I left the AR in and didn't think about that, this is definitely an improvement by the fact that it's much faster to reload.

[@mrrex2788]

Nice gun

[@lukericszi2425]

Man ive been to soo many $Dollar Generals for the dart zone apex and storm squad, on the hunt, still no luck... Anyone wana help me out?

[@Orangeosity]

Went to two $gen today in Boston area nothing yet

[@fishysyxx]

GIVE ME