Let’s Spray - Grant 7 Magic Flakes over Dodge Natural Green

In today’s video let’s spray Grant 7 magic flakes using the Aeropro A610 1.5 tip and Grant 7 Oh My Clear using the Black Widow 2.0 which will be given away in the upcoming 20k subscribers giveaway.
Underground Paint King merchandise: www.UndergroundPaintKing.com
Grant 7 Magic Flakes: www.BuyCustomPaint.com
Grant 7 Oh My Clear: www.BuyCustomPaint.com
Aeropro/A610 Spray gun: amzn.to/401bJRo
Disposable Paint Cup system: www.amazon.com...

[@Grant7]

Came out great my man ...and as always I appreciate your support

[@UndergroundPaintKing]

Appreciate you checking it out Grant and I appreciate the continued support 💯💪🏾

[@kingsway731]

Ive found that a lower pressure will keep the flakes suspended in the larger droplets doing multiple drop coats so you dont get those pieces sticking up and making the clear rough

[@UndergroundPaintKing]

I’ll give it a try with lower pressure, appreciate the info 💯

[@lesliwells5433]

What's up, the man,THE UPK, THE PEOPLE'S CHAMP, man than A610 1.5,got a fan 4u man,that's some sata jet style of hosing it down,once again THE UPK Has Done It AGAIN, NOW GIVE US THE PEOPLE'S EYE😅😂❤

[@UndergroundPaintKing]

😂😂😂appreciate you checking out the video Lesli💯💪🏾

[@lesliwells5433]

@@UndergroundPaintKing Your Welcome UPK,now let"s bring it back old school, with a bowling ball paint job on that fender,PEACE.......

[@UndergroundPaintKing]

@@lesliwells5433 that’s not a bad idea ❗️

[@larrydurr6064]

My brother you are spraying that Grant 7 oh my maple syrup that looks real good though

[@UndergroundPaintKing]

Thanks Larry, I appreciate you and the black widow definitely laid the oh my clear down!

[@lildno2007]

Looks great but u know on the 3rd n 4th coat u should have cranked that pressure up and let that Black Widow Glass It Out. I love how it spray at 25-32 psi but believe it or not when I accidentally had my regulator up at about 37-40 psi. Lord knows it laid that clear down. I had to stop and say well damn 🤯😂🆑

[@UndergroundPaintKing]

😂 I got a couple more plans for the fender so I wasn’t trying to wet it out too much but I definitely will be in the near future ❗️ appreciate you Fam💯

[@kingsway731]

That works to put down a smooth thin film but it blasts the paint into the air and it will fog out the rest of the car. You can get away with it on a panel or a bumper. Its actually a way you can keep trash out of the clear if you're painting outside on a windy day. The paint is super thin though

[@phordguy]

Top notch UPK - my favorite color for sure and great finish - Very classy

[@UndergroundPaintKing]

Appreciate you checking it out Phordguy 💯💪🏾

[@Aeropro_Tools_Official]

Nice job looks awesome with the flakes!

[@UndergroundPaintKing]

Thanks, I appreciate you checking out the video !

[@lesliwells5433]

@@UndergroundPaintKing ITis so good to see AEROPRO,LISTENING,THAT LET"S ME KNOW THEY ARE WILLING TO IMPROVE THEIR PRODUCTS,NOW THAT"S GREEAATTTTT

[@UndergroundPaintKing]

@@lesliwells5433 yeah it’s nice to know they are watching!

[@lesliwells5433]

@@UndergroundPaintKing NOW,WE KNOW AEREOPRO WILL BE COMING OUT WITH SPLIT NOZZLE TECHNOLOGY IN THE FUTURE,HOW AWESOME IS THAT......

[@UndergroundPaintKing]

@@lesliwells5433 maybe they will, I guess we will have to see

[@johnsabia3793]

I love my A610. Just painted sprayed some candy on some bike parts and it came out like butter baby.

[@UndergroundPaintKing]

Nice ❗️ glad to hear that A610 is working for you 💯

[@yeayeasautoadventures]

that cutty is a nice backdrop King

[@UndergroundPaintKing]

Thanks JoCo, it’s coming together nicely ❗️

[@yeayeasautoadventures]

@@UndergroundPaintKing sure is, that flake always reminds me of a bass boat lol my buddy had a 71 or 72 camaro, black with blue, silver a red stripes,silverflake, bassboat or not it was cool

[@UndergroundPaintKing]

@@yeayeasautoadventures flakes always look good on boats!

[@LakesideAutobody]

Hey UPK - hope everything is good with you my friend 😊

[@UndergroundPaintKing]

Hey Jerry, everything is good, I appreciate you checking up on me my friend ❗️💯

[@nolanlane9328]

The people's champ

[@UndergroundPaintKing]

Appreciate you Nolan🙏🏽💯

[@foxtrot68]

Man that looks good King ...again you make it look amazing !!!

[@UndergroundPaintKing]

Thanks Vin, I appreciate that 🙏🏽💯

[@jonnyturbo6142]

Dang with the A610 💥 let’s GO! Been wondering how it would handle flakes .. now we know, thanks !

[@UndergroundPaintKing]

Yessir, it handled them flakes without a problem JonnyTurbo 💯💪🏾

[@IEatMedia]

Ohh weee!!! 😂🔥🔥💪🏾 this came out nice bro! 👌🏾 it translated pretty good over the screen, i can only imagine how it looks in person

[@UndergroundPaintKing]

😂 appreciate you IEatMedia💯💪🏾

[@LakesideAutobody]

I love flakes ever since I was little riding the cars (honk honk honk) at Cedar Point. That'll look real good wet sanded and buffed. I don't think you'll disturb the flakes or at least you won't notice it 😊

[@UndergroundPaintKing]

Thanks Jerry and I was a big fan of low riders and loved seeing the flakes and patterns on them😁 I think it’ll cut and buff fine💯

[@1982MCI]

@@UndergroundPaintKingas much clear they are buried under, you won’t disturb that flake. 4 coats with a 2.0 tip has that flake tucked in good!!! Lol 😂

[@UndergroundPaintKing]

@@1982MCI 😂😂😂 I agree Don, I got plenty clear to work with!

[@ronjon5386]

I keep my gun upside down until it’s time to spray. I spray then turn it back upside down to keep it from clogging up. I have never had a problem and I shoot 015 and 008 flake. I and use a cheep Husky gun with a 1.8 needle

[@UndergroundPaintKing]

That’s good technique 💯💪🏾

[@joewalton2726]

Very nice bro.

[@UndergroundPaintKing]

Thanks Joe, I appreciate you checking it out 🙏🏽💯

[@itsjusti4262]

Can you spray flakes with a 1.3

[@UndergroundPaintKing]

Yes you can depending on the size flakes you’re spraying

[@tonyadams09]

Good demonstration

[@UndergroundPaintKing]

Thanks Tony, I appreciate you checking it out 💯

[@ericdurousseau]

Congrats on the 20k. Really digging the channel. Keep up the good work!

[@UndergroundPaintKing]

Thanks Eric, I really appreciate you checking out the channel 🙏🏽💯

[@gruponemesis]

I got 10 gallons of grant 7 that i ordered last year for my bus...cant wait to spray it on! Great video!

[@UndergroundPaintKing]

Wow❗️ 10 gallons is gonna have your bus glassy💯💪🏾

[@gruponemesis]

@@UndergroundPaintKing I have shot test panels with it...makes me look like a pro hahahahahahahaha

[@UndergroundPaintKing]

@@gruponemesis 😂 that’s what you want 💯💪🏾

[@1982MCI]

@@gruponemesiswhat kind of bus ya got brother? I’ve got an 82 MCI MC9 with a custom conversion but I need to paint it this summer and I’m gonna do some flake & pearls in the graphics but mine ain’t gonna take nowhere’s nears 10 gallons I hope. My bus is the old greyhound bus style that has the polished stainless steel on the lower half which helps reduce the amount of paint & clear I need big time plus I like the way it looks too. Show us pics when you get yours shot and I’ll send ya mine when I get it done. I can’t wait for her to be sparkling like she should again!! Take care out there and be safe man!! Good luck with the bus, I wish I’d gotten mine 25 years ago and started living the bus lifestyle then but at least I made it tho. I fricn love the bus lifestyle and the folks I meet from schoolies to coaches, they are just friggen cool!!

[@gruponemesis]

@@1982MCI heyyy..i have a 95 prevost featherlite...10 gallons cuz i need to make sure i dont ever run out during the process.

[@class2instructor32]

@UndergroundPaintKing Thanks man I finally got around to fixing the quarter panels with the vevor 6.3 gallon & the new yt160 (r500 with a teflon coating) in a good inflatable booth (WORKED IN THE WIND VERY NICE!) . The vevor never ran out of air, the gun had very little overspray & shot silver bmw metalic base coat perfect, only had some sag/runs in the clearcoat but Im better at fixing mistakes than painting so it looks great, Thanks for all the tips man!

[@UndergroundPaintKing]

Awesome ❗️ glad to hear you had great success with your small setup 💯💪🏾

[@larrydurr6064]

PS my brother I love them do you know how just to lay it on

[@1982MCI]

That camera just ain’t picking the flake up good. It looks great but it’s not showing the Grant flake like it should and other than the occasional flake catching the lens, it looks like a regular metallic spray out but I do know better. It’s just the camera but not much we can do bout it. I’m gonna give that flake and clear a shot since your recommending it so highly. I’ve got my Custom Coach I’m gonna paint soon and I want to throw some flake & pearls in some of the graphics and make it a real head turner!!! I’ve shot plenty of flake over the years and you did an outstanding job brother and earned ya a new sub today!! Can’t wait to make my rig sparkle again, thanks for the motivation!!

[@UndergroundPaintKing]

I agree Don the Camera just didn’t pick up the flake like it should have but I’m gonna work on that and I greatly appreciate you subscribing to the channel and I hope you enjoy the content and would like to see your coach as you go through your process!

[@sirbazyl86]

Love your videos man. I have similar compressor as yours, and I’m seriously considering painting my own car. As for beginner what spray gun would you recommend?

[@UndergroundPaintKing]

@@sirbazyl86 I appreciate you checking out the videos and recommend getting a lvlp spray gun if you’re running a small compressor. I really like the R500 spray guns which are sold by different companies

[@WilliamKennedy-e5j]

It really looks very nice . As to the paint gun give away not to beg but as a 72 senior citizen on a limited income I sure could use a paint gun for my project car Jaguar XJS coupe v12. I find a lot of tips in your videos .

[@UndergroundPaintKing]

Thanks William, I really appreciate you and good luck to you in the giveaway 🙏🏽💯

[@TheBeerBox80]

This looks amazing. I have picked up so many useful tips from your videos. Really appreciate you.

[@UndergroundPaintKing]

I appreciate you checking out the videos and I’m glad they have been helpful to you ❗️

[@ronjon5386]

I love Grant 7 clear coat. I use it on all my Kustom painting.

[@UndergroundPaintKing]

Nice 💯💪🏾

[@jacobydavis3953]

If I strip a car to bare metal with 80 grit and a variable speed polisher, do I need to go back and hit it with a da? Or is that enough for adhesion?

[@UndergroundPaintKing]

That’s good enough for adhesion

[@jamesadams3476]

Looks fantastic nice job upk. Like the part where you showed how to mix the flakes and clear coat.

[@UndergroundPaintKing]

Thanks James, I appreciate you checking it out my friend 💯

[@KJsGarage]

UPK what going on bro! You gotta get that cut dog ready for the summer in the back. She looks ready to shoot.

[@UndergroundPaintKing]

What it do KJ❗️I got you fam, the cutty will be hitting the streets soon 💯💪🏾

[@TheVegasbud]

The flake looks nice . You should do half flow coat and buff ,the other half just cut and buff .

[@UndergroundPaintKing]

Appreciate you Vegasbud and that’s a good idea ❗️

[@danamcintyre3565]

On camera its hard to really see the flakes like you said it almost looks the same !

[@UndergroundPaintKing]

The camera didn’t pick up the flakes like I thought it would but it was definitely sparkling in the sun! Appreciate you checking it out 💯

[@coronaman9438]

Dat flake job is slick as fuk bang bang you put dat out the park

[@UndergroundPaintKing]

Appreciate you CoronaMan🙏🏽💯

[@jeantaylor6785]

Looking good my brother. I sent 5 big boxes to you today da 👑

[@UndergroundPaintKing]

@@jeantaylor6785 appreciate Jean, I’ll keep a lookout for them ❗️

[@shawn9878]

Do they have candy concentrate, would it be over kill to add that?

[@UndergroundPaintKing]

He does have candy concentrate and you definitely could add it Shawn!

[@Swampyssidehustlehobbyshop]

@upking The 0.04 and 0.08 flakes will actually shoot through a 1.3 nozzle. I am using the 1.5 in the A610 Mixing my flake in UPol 2882 urethane and2303 catalyst. I will take a look at grant seven

[@UndergroundPaintKing]

Thanks Swampy, I’ll definitely try shooting with a 1.3 and let me know what you think about Grant 7 products 💯

[@Swampyssidehustlehobbyshop]

@@UndergroundPaintKing @upking i did a search but could not find any place selling it🤔

[@UndergroundPaintKing]

@@Swampyssidehustlehobbyshop the website is in my description

[@jacobydavis3953]

You should make a video on how you started your own shop

[@UndergroundPaintKing]

I might do that video someday 💯

[@geraldwilliams3898]

UPK, I am sanding a project with my 8 year old son, it was clear coat that is coming off. I am using 320 grit. Do I need to feather chipping clear coat or completely remove chipping clear coat? Trying to get it primer by weekend, then glazing putty for dings etc.

[@UndergroundPaintKing]

You can feather it if you have clear coat that you know for sure has good adhesion outside of the chipping clear coat

[@geraldwilliams3898]

Appreciate ya kinfolk

[@UndergroundPaintKing]

@@geraldwilliams3898 you’re welcome Fam 💯

[@JohnWD40TC02]

Those flakes look really nice PK but I think they would look a lot better after a flowcoat👌could you mix different colour flakes and would you see those colours after they were on the panel? I've never used flakes before so I'm not sure what you can do with them🤔 Thanks for sharing PK👏🙏👍

[@UndergroundPaintKing]

I agree John, I think the flakes would pop more after a flow coat and I’ll test out adding different color flakes and see what we get! There is a lot of different flakes out there so the sky is the limit on what you can do when it comes to do custom paint work 💯 always good hearing from you my friend 🙏🏽💪🏾

[@JohnWD40TC02]

Ok that would be great looking forward to seeing what you come up with, thanks PK👌👍

[@UndergroundPaintKing]

@@JohnWD40TC02 appreciate you John!

[@rockycaruso387]

The King is making that fender glisten and a poppin 💪🎉.. Hey King, Question: when you clean your guns do you lube your needles or do you believe it's unnecessary?

[@UndergroundPaintKing]

I appreciate that Rocky💯 and I don’t use any grease on the needles personally but it’s not a bad thing if used properly 💪🏾

[@rockycaruso387]

@@UndergroundPaintKing Thx for your thoughts.. I've heard complaints about fish eyes when lubing needles.. That's why I was curious on your thoughts 🤔.. Keep the videos coming and have a great week 💪

[@UndergroundPaintKing]

@@rockycaruso387 you’re welcome and I honestly never do it for that exact reason!

[@davidevans212]

The King has struck again!!!!looks great,And the flake is popping.......Thanks for the video.

[@UndergroundPaintKing]

Thanks David, I appreciate you checking out the video 🙏🏽💯

[@donaldswider3858]

I like it turned out pretty sharp

[@UndergroundPaintKing]

Thanks Donald, I appreciate that 🙏🏽💯

[@clevewilks4312]

What is the iner coat for. Is that because your shooting flakes. Couldn't you have shot the flakes in the grant 7

[@UndergroundPaintKing]

It has multiple uses and I prefer it over putting the flakes into the clear because it allows me to cut and buff the clear without having a issue of cutting into the flakes, it’s just my preference, you can put the flakes into the clear if you want

[@clevewilks4312]

@UndergroundPaintKing Thanks for your reply big dog. So is this just used for a job that has flakes are can this be a step when just doing a solid color base. I'm knew to painting so looking for any advantage to get better!! Thanks once again

[@UndergroundPaintKing]

@@clevewilks4312 if you’re doing a solid color you can skip the inner coat step and just go straight to clear.

[@printissgraham4930]

What city you in you bad

[@UndergroundPaintKing]

I’m in Michigan, appreciate you 💯

[@jaronjackson5501]

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥layed it down as always bro 💪🏾💯, grant 7 products is A1

[@UndergroundPaintKing]

Appreciate you Jaron 💯💪🏾🤘🏾 definitely 🔥 products ❗️

[@jaronjackson5501]

@@UndergroundPaintKing yesssss sirrrr your welcome bro 💪🏾💪🏾💪🏾💪🏾💪🏾 appreciate what you do. Many blessings to you and yours 🙏🏾💯‼️

[@UndergroundPaintKing]

@@jaronjackson5501 Blessings to you and yours as well 🙏🏽💯

[@dennisgray7509]

Looks great man!

[@UndergroundPaintKing]

Thanks Dennis, I appreciate you checking out the video 🙏🏽💯

[@hidesertdave6166]

hi UPK, hane not seen a new video from you. Hope you doing good.

[@UndergroundPaintKing]

Hey Desert Dave, I’m doing good, and I hope all is well with you also❗️

[@hidesertdave6166]

Glad to hear that, Hope to see a new video from you soon

[@UndergroundPaintKing]

@@hidesertdave6166 I’ll have new videos soon!

[@Danno74Z]

Another mentioned cut and buff the fender I second that. Since you put four coats of clear on do you have to wait a week before doing that? Also you mentioned a flow coat. Do you sand the fender first with 600 grit first since the clear coat is dry now? Thanks.

[@UndergroundPaintKing]

I definitely would wait a week to cut and buff it and if I’m going to do a flow coat I could cut with 600 or 800 now and then do my flow coat

[@Danno74Z]

@@UndergroundPaintKing Thank you UPK.

[@UndergroundPaintKing]

@@Danno74Z you’re welcome!

[@Danno74Z]

UPK, I really like that Chrysler Green PGN color. I just bought a pint of it to spray my lawn tractor. :) A very old machine but with a little new paint will look good. That color has some pearl in it already so no flake :). Going to practice on this project. Then spray some clear over the base. Following your videos.

[@UndergroundPaintKing]

@@Danno74Z nice ❗️ you’re gonna have the coolest, wettest lawn tractor on the block 😁

[@roscoefinch8381]

Is there a specific gun I would need to spray flakes or it doesn't matter I just got almost everything I need except the gun

[@UndergroundPaintKing]

The tip size would matter more than the actual spray gun that you use

[@roscoefinch8381]

@@UndergroundPaintKing so that size that your spraying with would be the ideal size then

[@UndergroundPaintKing]

@@roscoefinch8381 depending on the size flakes you’re spraying you could go with a 1.3-1.5 tip

[@roscoefinch8381]

@@UndergroundPaintKing I. Going to send u a dm

[@UndergroundPaintKing]

@@roscoefinch8381 ok

[@jeantaylor6785]

Looks awsome my brother I sent you tex this morning da king Mr King of paint and no trickery real deal man my brother from 605 and da 510 anyway I got order in check tex peace and respect s da king

[@UndergroundPaintKing]

@@jeantaylor6785 appreciate you bro, I got your order in progress!

[@jeantaylor6785]

@@UndergroundPaintKing you rock da king 608 paint 👑 from da 510 peace lsend u a message tex when all dat stuff is coming to you champ my brother lh&respects to yea

[@UndergroundPaintKing]

@@jeantaylor6785 I’m looking forward to your text!

[@jeantaylor6785]

@@UndergroundPaintKing cool my brother I wanted a hat to match my hoddie u must be out send me a old one yo if u got one from da 510 ripping and Crippin ain't no Bull sh_t on da paint kings channel he's a professional a 1 and he's a Christian not a false professional he deserves the praises of the art of painting because he's not a bull__ter he really cares about his people s that's why he says he s the people s champion good man lh&respect s my brother 608 👑

[@jeantaylor6785]

I got in tex when paint stuff is coming my brother ✌

[@DavidJacobs-ch8dc]

Congrats on 20k , Thank you for showing us how you get such great results. I love the flakes , you did a great job .

[@UndergroundPaintKing]

Thanks David, I appreciate you checking out the video and being apart of the 20k🙏🏽💯

[@johndosh2469]

Oh heck yeah!! Nice work!! I'm about to spray another honda with some neon green flakes over black hope it looks this nice

[@UndergroundPaintKing]

Nice John, over that black base those neon flakes should really pop💯🤘🏾

[@manuelmejia76]

Bro now ur talk n my style lol

[@UndergroundPaintKing]

😂… are you flaking your project bro

[@manuelmejia76]

@@UndergroundPaintKing u member that lil car I flaked out that I showed u fam

[@nclildogg2]

Bro I hope all is well!

[@UndergroundPaintKing]

All is well Ant, I appreciate you 💯

[@nclildogg2]

@@UndergroundPaintKing 💯

[@hankshobbies]

Always wanted to know how to spray flakes…..thanks for the awesome video…..you the man

[@UndergroundPaintKing]

You’re welcome Hank, I’m glad the video was helpful and I appreciate you checking it out 💯

[@ganeshnarayan5505]

Dam King came out really nice that Grant7 flakes and clear coat are really nice stuff.

[@UndergroundPaintKing]

Definitely some nice products from Grant7 Ganesh 💯 I appreciate you checking out the video 🙏🏽💪🏾

[@speedokoterefinishnetwork4937]

Looks great !!

[@UndergroundPaintKing]

@@speedokoterefinishnetwork4937 thanks, I appreciate you checking it out ❗️

[@speedokoterefinishnetwork4937]

@@UndergroundPaintKing how have you been man?? Btw I'm a rep for speedokote now , please call if you have any questions! Here to give honest help

[@UndergroundPaintKing]

@@speedokoterefinishnetwork4937 I’ve been good, appreciate you asking! How have you been

[@speedokoterefinishnetwork4937]

@@UndergroundPaintKing surviving bro. Alot of us that got there own businesses are really just making it by this year . Americans don't really have the spare cash to care about how there cars look rn 🤣🤣

[@UndergroundPaintKing]

@@speedokoterefinishnetwork4937 yeah it’s getting tight for some people right now

[@barnes29510]

Looks right! Oh I caught myself singing your intro song the other day 😅.. it stayed stuck in my head all day 😅 🤙🏻🤙🏻🇺🇸

[@UndergroundPaintKing]

😂 my bad Barnes 💯 I appreciate you checking out the video ❗️

[@barnes29510]

@@UndergroundPaintKing Hell yeah, you know it!! Sometimes I get this "funk" on me and it's hard to shake. So when I need some inspiration you the man I go to!

[@UndergroundPaintKing]

@@barnes29510 glad I can help get that funk off you 🙏🏽🤘🏾

[@travlite8496]

About time Boss keep bringing them vids.

[@UndergroundPaintKing]

I’m definitely gonna keep them coming Trav💯💪🏾

[@CutlassVibes]

Looks great! Keep up the good work!

[@UndergroundPaintKing]

Appreciate you Cutlass Vibes 🙏🏽💯

[@suspensefulness]

what compressor do u use

[@UndergroundPaintKing]

I have a 21 gallon compressor in my shop along with my 80 gallon compressor

[@suspensefulness]

@@UndergroundPaintKing can i use the black widow with my 21 gallon to paint my car

[@UndergroundPaintKing]

@@suspensefulness you can but you’ll deal with the issue of the pressure dropping while you’re painting, as long as you’re mindful of that you can do it

[@suspensefulness]

@@UndergroundPaintKing appreciate u King

[@garagehack2060]

Oh My! That fender looks awesome!

[@UndergroundPaintKing]

Turned out great GarageHack! I appreciate you checking it out 💯💪🏾

[@NathansMoparGarage]

Those are some nice flakes when the sun hits them.

[@UndergroundPaintKing]

I agree NathansMoparGarage 💯 the camera just didn’t do it justice❗️I appreciate you checking out the video 🙏🏽💪🏾

[@los3627]

I could see the flakes, it came out great!! 😎👍

[@UndergroundPaintKing]

Thanks Los, I appreciate you checking out the video 🙏🏽💯

[@ANDY-we7mr]

What a, cracking job there under ground paint King 🤴 very well explained thanks for sharing that andy from UK 🇬🇧 United Kingdom 🇬🇧

[@UndergroundPaintKing]

Thanks Andy, I really appreciate you checking out the video in the UK🙏🏽💯

[@ANDY-we7mr]

@@UndergroundPaintKing iam going to paint a fender or a front bumper in the UK and a wing passing side ok to wet bed clear coat blender on the wing and bumper then base coat paint and clear coat paint

[@UndergroundPaintKing]

@@ANDY-we7mr yes you should be fine with that process

[@ANDY-we7mr]

@@UndergroundPaintKing told the customer I carnt guarantee a colour match so the bumper of ebay is new black one so clean it down apply dark grey primer then clear blender base coat and base coat paint and clear coat paint same on the wing 😀

[@UndergroundPaintKing]

@@ANDY-we7mr sounds like you have the process down 💯

[@oldmanintheshopbuiltnotbou8726]

man you make it look so easy

[@UndergroundPaintKing]

I appreciate that Oldmanintheshop🙏🏽💯

[@davidharrison8397]

Nice job ... turned out great

[@UndergroundPaintKing]

Thanks David, I appreciate you checking it out 💯

[@warpspeedracer]

Beautiful. Beau--ti--ful.

[@UndergroundPaintKing]

Thanks Roland, I greatly appreciate that 🙏🏽💯

[@terryburton971]

What's up king

[@UndergroundPaintKing]

What it do Terry ❗️

[@jasoncastro7486]

Looks great!!!

[@UndergroundPaintKing]

I appreciate you checking it out Jason 🙏🏽💯

[@radkeela2]

What up King

[@UndergroundPaintKing]

What it do Chris💯❗️

[@Tom.......]

Damn already with the reup. You far from that big dude.

[@UndergroundPaintKing]

@@Tom....... appreciate you Tom💯

[@Tom.......]

@@UndergroundPaintKing it's all good.

[@FE428Power]

I just tried flake for the first time last weekend. I laid 3 coats of clear and let in bake in the Florida sun for 3 days. Used a da with 600 and then laid 3 more coats. Came out slick! Used the 3300 GTO with your recommended settings! Ty UPK! I wish you had a place to post our projects.

[@UndergroundPaintKing]

Glad to hear it worked out for you 💯 email me pics at [e-mail] I definitely want to see your work ❗️

[@1982MCI]

That would be cool if he had a way of posting our project pics!! Maybe if we start sending him short video clips or pics of our stuff, he could edit them in at the end of his videos to close his video out, that would be cool!!

[@UndergroundPaintKing]

@@1982MCI I definitely like that idea!

[@phillipgonzalez5407]

Do you got an Instagram

[@UndergroundPaintKing]

Yes I do