Man 😤 all that hype. For this can of honey 🤨

Well I finally got a chance to give it a small test run. I can definitely see what all the hype is about. This stuff will burry Metal flakes, pearls, decals you name it.
aerosol clear blender
www.collision360.ca/pro-spray...
Grant 7 products 👇🏼
buycustompaint.com/

[@Grant7]

Lol@ BBW thick! But You handled it like a champ. I appreciate your honest review

[@thetriggerman954]

4sho and everybody know that BBW thick is some thick stuff 😂😂 thanks for letting me try the product. 🫡

[@mississippiwrenches295]

Heck yeah it good I been seeing this clear too but I don’t know where to get it from I wanted to try it out too

[@UndergroundPaintKing]

🤣 get ‘‘em off that baby bottle Triggerman, you killed the blend like always and dropped some jewels then finished it off right with that Grant 7 clear 🔥

[@thetriggerman954]

Lmao 🤣🤣 yea man them boys don't want to come off momma titty. 😂 That Grant 7 official man. Thanks Champ 🏆💯

[@UndergroundPaintKing]

@@thetriggerman954 🤣🤣🤣

[@mississippiwrenches295]

@@thetriggerman954😂😂😂😂

[@stephenjones4013]

True grit and sprayway says this the truth

[@thetriggerman954]

Them boys ain't telling no lie 🤥

[@bryanmiranda1745]

You're getting comfortable asf in front of that camera bro, keep it up

[@thetriggerman954]

Thank you bro, I guess with watch video it gets easier and easier. 🫡👊🏼

[@tracycolorado]

You can handle it Trigger. Mind over matter . Too bad the whole car didn't get cleared , that's some good stuff

[@thetriggerman954]

🤠 thank you Tracy mind over matter 🧘🏽‍♂️

[@ronjon5386]

I love grant 7.

[@SpeakerKevin]

I like how you tacked the plastic in addition to the panel, brilliant!

[@thetriggerman954]

💪🏼 thank you sir 😁

[@craigdaniel5429]

I really learned a lot from you explaining the blend technique and how to keep the blend wet. Thanks so much for your help.

[@thetriggerman954]

You're more then welcome, glad it helped 💪🏼

[@tracyrenko4171]

It looks amazing very slick

[@thetriggerman954]

Yea that clear is nice. The owner of the shop likes it too. 💪🏼

[@sparkywelder5893]

Yo my boy you rocked that blend

[@thetriggerman954]

Thanks man easy peasy 💪🏼👊🏼

[@RickysmobilebodyworkinLaPuent]

Hey triggerman you're the man. that clear loves a lot of pressure I use it before 45psi PS I still use your tips thank you 💯

[@thetriggerman954]

Yea that's what I'm hearing. Higher pressure I shot a fender with my SATA Jet 5000 RP 32psi and it laid it down. That stuff is crazy thick 😄 Thanks brother 👊🏼

[@davidharrison8397]

Nice job brother ! Gotta try some of that clear myself

[@thetriggerman954]

Thank you bro. Yea give it a try can't goo wrong

[@moedog07]

Triggerman that G7 is shiny but that Florida sun is going to put it to the test! Good video.

[@thetriggerman954]

Thank you brother And yeah I thought about that the next job I spray with it I'm going to do a spare fender and keep it at the shop out in the sun and every couple months I will update you guys on how the fender is holding up sitting in the sun 24/7. But I definitely thought about that 💪🏼

[@vicshonebethel9934]

That's what I call perfection 😎👍

[@thetriggerman954]

Thank you brother💪🏼👊🏼

[@Jerome3278]

😂🤣😂 Gotta love it though trigger man 🔥🔥💯💪🏽👌🏽

[@thetriggerman954]

Thanks brother man 💪🏼👊🏼

[@lowride28s]

Trigggga you been on vacation homie I thought dem vevor haters caught up with you and 🥊🥊😂. Another great video. I been curious bout that grant 7. I’m a lil scared of that extra thick clear. Might have to try a quart out 💪🏾💪🏾💪🏾

[@thetriggerman954]

C'mon mannnnn them haters better stay behind them Iphones 👊🏼 yeah man needed to digital detox for a week. Yea try it out. Worst case you just have to reduce it but then that means you'll have more actual clear to spray. Thanka for watching bruh bruh 🫡💪🏼

[@Popsm0ke]

That clear looks thick like epoxy....good job

[@thetriggerman954]

Thanks man. Yeah it's some thick shit. Almost like a clear resin type viscosity

[@ganeshnarayan5505]

Good Blend Triggerman you are the Dude

[@thetriggerman954]

Thank you you brother. 1 2 3 blend em and send em 🫡💪🏼

[@cocko1135]

Hey brother, i cant believe you blended that like me, woohoo 🎉. Solid blend man, definitely too much wet bed shiy going on these days, has its place but not a simple blend. Good to see Goldilocks getting a run in the booth too. Can you give warming the clear up a go and see what happens with it? You may hate it but maybe not..... I hate using reducer in clear, so i always warm mine to around 35 Celcius. Good to see you back in action, we all need a break sometimes😉🤙

[@thetriggerman954]

COckooooo what up brother , yeah man to much wet bed safety net going on. Blended like you 😂😂😂 I'm learning man. Now if I could hit a golf ball I'd be in business 💪🏼

[@cocko1135]

@@thetriggerman954 I still ain't dancing in the booth with my gun though bro 😜. 2 things I hate about wet beds are, it can create build up on edges and it almost determines the peel you end up with 🤢🤮. You've got me on booth skills man, keep off my grass 💪🤣

[@user-un5my5bw4j]

I use a 1.2mm with my DV1-C for when I am spraying high solids and euro clears that are high solids because the 1.2mm will break up the thick clear better than a 1.3mm or 1.4mm nozzle. I use the 1.3mm and 1.4mm for medium solid production clears. I never tried Grant 7, i have heard of it and know its expensive but i would like to try it on one of my custom kandy or pearl paint jobs

[@thetriggerman954]

Yes that clear is super thick I wonder how the DV1 would do on it. I know it will be slow but I'm curious if it can really handle it. That grant 7 is truly the thickest clear coat I've ever seen in 28 years.

[@gruponemesis]

I got 7 gallons of Grant in the garage...for my bus project😊😊 Another great vid fam...got my eyes for them paint fairies that will be coming!!😂😂😂😂😂😂😂

[@thetriggerman954]

7 gallons good lord lol you spent some bread. Must be a nice project 💪🏼 of you see any fairies shoot on sight for me soldier 🪖 🔫 🫡

[@tonydiesel3444]

Hopefully you got the right clear for a large object like that you want a long open window maybe a slow activator slow reducer not a fast are dry clear

[@gruponemesis]

@@tonydiesel3444 my first tooth fairy!!!

[@beachcitymobile]

Love that you show the blends outside in the sunlight and from different angles and distances. (Unlike ya buddy down the pike 😆 ) If it's gonna show, that's most likely where it's happening. Hey, what nozzle, air cap, and pressure did you use for second coat of the clear with the LPH-400?

[@thetriggerman954]

Yea man no sense hiding the cars in the shade let's see them metallics and blends. I was at 20 psi, LV silver cap, and 1.4 nozzle. It broke that clear up like it was nothing. 👊🏼

[@tonydiesel3444]

Hi psi 4 the thick stuff

[@thetriggerman954]

Yea I see. High pressure for the honey 🍯 🤣

[@timgiesin4025]

Damm I enjoy watching your videos

[@thetriggerman954]

Thank you Tim, glad you enjoy the vids man. 👊🏼

[@tonydiesel3444]

I've been looking for a new clear for almost a decade I've tried a few I always end up going back to PPG dc4000 I know it looks good for the decade at least2 coat clear

[@thetriggerman954]

My all time favorite clear is PPG 2021 but it's $700 plus a Gallon now. And I don't need nothing to shine that bad 😅

[@ntonytay]

Looking good trigger. How do you see that the clear is not laying out the way you want? Any tips perhaps to see how the clear lays out?😅

[@thetriggerman954]

As soon as the clear hits the panel it should basically be the way you want the finish to look. I don't care if it is the first coat or not it should replicate what you want to see. If not stop and adjust. But it's also something that comes with time / experience. Keep painting you'll see what I mean.

[@tonydiesel3444]

I started with 320 then I went to 400 then 500 then 600 and I'm now at 800 grit before base so 600 or 800 depending on the color and if it's solid or metallic but I like 800 I don't want no die back

[@thetriggerman954]

Amen to that, fuck die back 🤣👊🏼

[@3rekoatskustoms929]

Grant7 is a good dude he hooked me up the first time I use it, it didn't turn out to good for me and he sent another set no charge waiting to use it on the rite paint job. Can't bet that wet look.

[@thetriggerman954]

Yea he seems cool. Did you reduce it? Or shot it straight? And which gun set up did you use?

[@3rekoatskustoms929]

@thetriggerman954 I don't remember it's been a while I have a whole different setup up now, bigger guns bigger compressor.

[@thetriggerman954]

@@3rekoatskustoms929 true, you ready for war now 🪖🪖🪖

[@3rekoatskustoms929]

@@thetriggerman954 for sho lol

[@braindmage]

Looks about like Nissan KAD. If it’s anything like that, blending is a savior

[@thetriggerman954]

KAD is a biiiioatch, my last 2 Infinitis where KAD and man when I tell you a nightmare even for my own car. I kept a quart of matched paint in my personal tool box. Yea that's definitely a tough one man.

[@braindmage]

@@thetriggerman954 big facts. There are about 13 or 14 variants with Axalta 🤯

[@thetriggerman954]

@@braindmage 😭😭😭😭😭

[@gladememmott3001]

What product in that aresol can did you use to blend? Thanks 😊

[@thetriggerman954]

www.collision360.ca/pro-spray-1k-spot-blender-aerosol.html

[@jeremyr7147]

13:35 BBw thick, get off the baby bottle.. Your antics are hilarious, language is pimp og.

[@thetriggerman954]

Lol 🤣 thanks brother. Glad you enjoyed . 💪🏼

[@tonydiesel3444]

I don't know if they make it anymore but some guys were and Carolinas doing repair work and they used Omi brand AU clear coat it was as thick as honey

[@thetriggerman954]

I've heard of Omni which is a cheaper product from PPG never heard of Omi. Was it good stuff? 🤔

[@heightsgolan8742]

try autoBahn 9044. It is thick and just as glossy. Wet wet repackaged it, But it was actually autoBahn clear. it would e funny if grant7 is actually autoBahn...lol

[@thetriggerman954]

🥴

[@The88katana600]

Still got a qt of grant 7 silver I need to try out yet. Bought it like 2 yrs ago.. lol

[@thetriggerman954]

Damn bro what's the holdup? What have you been using instead?

[@The88katana600]

i use a lot of ppg dbc or omni plus @@thetriggerman954

[@The88katana600]

@@thetriggerman954 plus we just moved to a new home like 6 months ago still trying to get the garage in order, I did add a new to me tool for the garage if you wanna check the vid out

[@thetriggerman954]

@@The88katana600 I see the port-a-lift smooth for a homw garage. Now it's time for the spray booth 😮

[@SmokeyA55]

Trigger man every time I use Grant 7 I am getting a lot of what I think is solvent popping wonder is reducing will help

[@thetriggerman954]

•What activator are you using? Fast/slow/medium •What's the temperature you're spraying in? •all panels or just the top surfaces?

[@SmokeyA55]

@@thetriggerman954 I did an over all paint on my 64 impala in back garage use medium hardener it was around 85 degrees waited approximately 15 minutes between coats but still got solvent pop has an excellent shine an wet look can’t see pop in sun but when in shop I can it will wet sand an buff out but just wondering why it keeps happening

[@SmokeyA55]

I actually think I might be laying it down to thick I am just at DIY trying to do my own stuff

[@thetriggerman954]

Your temperature and activator speed sounds correct, it may just be that you are putting it on heavy like you said. It is a thicker clear so putting it on too heavy could definitely cause solvent pop. We get accustomed to spring a lighter clear and putting it on heavy getting away with it then when it comes to something like this you have to adjust your spring style. But it sounds like you know what it is listen to your gut and ease up on them coats there 👊🏼💪🏼

[@Grant7]

Also check your panel temperature. It may be 85 in your garage, but there is a possibility that your panels could be hotter. Next time we might have to try you with a slow.

[@HiFiInsider]

can you please make a video about the benefits of sanding primer, if any. thank you.

[@thetriggerman954]

Benefits of sanding primer? 🤔 You gotta break that down for me man. Primer has to be sanded down before you can paint. So I'm not really sure if there's a benefit to it it's just something that needs to be done. It's kind of like what is the benefit of masking up the car before you paint it the benefit is you don't get paint all over the car. But if you going to a little more detail on what you're asking I'll try to answer it to the best of my ability.

[@HiFiInsider]

@@thetriggerman954 you're right! to clarify, hand sanding vs machine to achieve a flatter result. thank you!

[@thetriggerman954]

@@HiFiInsider in my opinion you should "ALWAYS" finish your sanded primer with a DA sander with a soft interface pad. When you hand sand or block primer you will leave scratches in the primer that can shrink back and show up, so I like to use a soft pad on the DA after with either 400 or 600 grit to get those scratches out. The soft pad on the sander prevents you from changing the form of the bodywork that was repaired. I hope that helps

[@HiFiInsider]

@@thetriggerman954 yes! thank you for the tips. 🤜🏻 🤛🏻

[@tobydogg4737]

👊

[@thetriggerman954]

👊🏼

[@andrewarren2701]

Told you that it some good shit, it's thick and you was have to reduce it. That Vevor would do that Custom job though

[@thetriggerman954]

I actually got it to lay down with no reducer, and a different gun. Video is loading now should be up in an hour. Check it out

[@randy1ization]

why not bump the pressure up a bit> does that cause too much over spray?

[@thetriggerman954]

Depending on the gun it will start to distort/not atomize properly. I've never ran my guns that high so didn't want to screw up on camera 🤪 I was doing it live for the first time using the clear. I'm going to try it again at higher pressure "off camera" and see how it works 🤫

[@randy1ization]

@@thetriggerman954 hey bro, Im painting my truck with GM INDIGO BLUE METTALIC , paint code,, U9792 , base coat /clearcoat system... what I want to do, is give it more depth and pop, like they have on the new dodge challengers with the indigo blue.. what could I do to get that effect? do I have to get some dye and make a midcoat to spray before the final clear coat? or add some pearl to the midcoat ? how do they get that beautiful effect on those challengers... thanks

[@thetriggerman954]

@@randy1ization maybe take whatever metallic or pearl that's in the mix and add more to it, or the some in a mid coat. Do some test panels see what you like. Extra pearl in the base never hurts. But definitely do some test panels

[@eapauto]

Trigger man, what fluid tip and air cap on the pro lite?

[@eapauto]

Sorry, saw the whole video, you said it. Great job! Keep up the good work!

[@thetriggerman954]

I said it twice 🤦🏽‍♂️ 1.4 and TE20 cap 💪🏼

[@eapauto]

@@thetriggerman954 I heard if you crank up the air on the Pro Lite, it will spray it, I don’t know what the air pressure would be, 35-40?

[@thetriggerman954]

@@eapauto I've tried to go higher on my prolite on other clears and it seems like it distorts at higher pressures. But you could be right It just seems like every spray gun has its sweet spot for optimal results. I might try it off camera 🤣

[@diggy561]

Glossy, and praise to Haile Selassie 🇯🇲

[@thetriggerman954]

Ire Bredrin ire boom bye bye 🫨

[@deanbrown7643]

Pays the bills bruh pays the bills 😊😊😊

[@thetriggerman954]

4sho and your tricking of you're into that 💰💃 😉

[@deanbrown7643]

@@thetriggerman954 for sure man for sure 👊👊👊

[@deanbrown7643]

Got 3 gti pros myself and tbh cant fault them guns 😉😉😉😉

[@deanbrown7643]

For me personally there up there with ya iwatas ya satas ya walcomes sagaolas etc 😇😇😇😇

[@thetriggerman954]

@@deanbrown7643 yea they are great I have 2 of them. It usually knocks it out the park.

[@canadianpainter8344]

Prolite probably be ok around 31 to 33 psi. Just saying. I never tried BBW.

[@thetriggerman954]

Lol usually I spray my prolite 25-29 with no problem. Never tried a BBQ either 🤠 I did turn it up to 29 still wasn't cutting it. This stuff is different bro lol

[@moutonisntscaredtofail1968]

Yo Trigger! I have the LPH400 with the LVX tip. I shot some Grant 7 on some panels, and had no problems. Larger, vertical panels, I struggle. Any advice?

[@thetriggerman954]

When you say struggle, like what type of problems are you having?

[@srodgie]

Hey Trigger, Great video Brother! 💯👍 I am after some advice from you please....... I am thinking of purchasing the Wider4L spray gun. It is the replacement for the lph400. Have you used the W4L and would it be a worthy choice/purchase? Cheers Sir. Steve 👍

[@thetriggerman954]

I have a friend that has that gun and it definitely does not spray the same as the LPH400 if I'm not mistaken that gun is cheaper than that LPH400 cheaper for a reason. I honestly don't think there's any other spray gun on the market that is comparable to the LPH400. Not saying it's the best but saying there's nothing that compares to it or spray similar to it.

[@srodgie]

@thetriggerman954 that what I was thinking also regarding the price difference. As I am in the UK, I am finding it hard to try and get an lph400. Would you know of anywhere that I could purchase one that ships to the UK please? Many thanks Steve👍

[@thetriggerman954]

@@srodgie I'm not exactly sure, Amazon or eBay?

[@srodgie]

@thetriggerman954 I have seen one on Amazon UK..... LPH 400 Silver 1.4 LV for £500

[@meanpaintandbody]

1ge is horrible lol I rather re paint the complete car if my mixer is off on vacation

[@thetriggerman954]

Got dam the whole car 😭😭😭 not even a blend? Lol

[@mitchellferre1652]

What blending thinner was that, spraymax ? I use upol blenz #9 and im lookin for something better

[@thetriggerman954]

This stuff is awesome. ProSpray product www.collision360.ca/pro-spray-1k-spot-blender-aerosol.html

[@tonydiesel3444]

Use w400

[@andrelawrence9644]

Lph400 will never die

[@thetriggerman954]

Man you can say that again love my LPH 🫡

[@MrJoeyrodriguez]

@@thetriggerman954 log did u use 1.3 ? And what pressure

[@thetriggerman954]

@@MrJoeyrodriguez 1.4 and 21 PSI " I believe"

[@richardblanke5521]

😂💲💲💲🚘

[@jimmycocks]

Nice trigger. Yeah man that 1h1 pre-dawn metallic every time pita- I make 3 4 sprayouts on bumpers sometimes. Ngl I used to be lazy with my paper on the clear blends. The trigger tunnel is legit, I don't sand shit, 30 sec with my lil buffer and it's out. if you ever wanted to do a deep dive into how you tint those damn Greys I think it would help alot of ppl. That clear is thick man.

[@thetriggerman954]

Yea I always say I need to show the tinting. Man I mixed 3 different alternates intented the last alternate just to make it blendable, You know how it is when you're Tintin colors frustrated mixing other alternates The last thing I feel like dealing with is a video camera recording it but I know it will be helpful and I plan to incorporate that in the near future Good tip and thanks for the advice. 💪🏼👊🏼

[@jimmycocks]

@@thetriggerman954 its funny man. I tell my boss almost every time im fighting a grey I'm done I don't Want to paint no more I'm getting a desk job. Appreciate u trigger thank u for showing the the trenches enjoy wkend man.

[@BearBudgetTurbine]

Hey, Trigger...how does the w400 compare to the Lph400? I have the w400 and it's a favorite of mine that just felt right from day one. Little heavy on the fog with no paint booth, but I like the results.

[@thetriggerman954]

Yea I have both and I tend to favor the LPH less fog atomizers at half the pressure lays down a nice sheet of clear. Pretty much my favorite clear gun.

[@thetriggerman954]

Even with a spray booth the w400 is a fogger 😂

[@BearBudgetTurbine]

​@@thetriggerman954ahhh great. Now I want one🤣

[@thetriggerman954]

@@BearBudgetTurbine spray guns are addicting aren't they 🤣

[@tonydiesel3444]

W 400 lv4 almost 20 years for me

[@buddygrantham8738]

Why did you rub your bare hand on it before you started spraying?

[@thetriggerman954]

I like to feel my vehicle before I spray. Lot of the old school painters from my generation did this. Of course not have eaten greasy wings before doing so 😉

[@Earn23jr]

Haha yehh Real proper like jack...mf slicc

[@thetriggerman954]

😎🤙🏽🤙🏽

[@tedc9306]

Why do u blend ur clear above the door when u can take it down the rest of the way??? Honest question, I curious. Ty

[@thetriggerman954]

That's the way the owner tells the prepper to set it up. And that's the way I have to paint it.

[@tedc9306]

You say you're blind panels are Blended out to 800 what is your body work primer Blended sanded with

[@thetriggerman954]

@@tedc9306 primer 320 or 400 to start depending on primer texture then 600 to finish off the primer. I'm trying to figure out a way to include more prepping videos for you guys thing is we have a prepper here at the shop and that's their job but I definitely plan to include some prepping priming videos soon even if I have to do someone else's job just to show you guys the right way to prep these cars and make your paint job better and easier.

[@tedc9306]

I'll be watching in the meantime I like the way that you narrated how the prepping was done even though you didn't show it you still explained it and I was able to pick it up I just had another little couple questions to go with it

[@tedc9306]

Thank you for responding so fast

[@clydecare]

I see some issues. But in your defense my screen is dirty. 😂😂😂

[@thetriggerman954]

🫠 c'mon Clyde you still using that flip phone 😂