Follow me on Instagram: @gt__performance / gt__performance Subscribe to my KZbin: / gtsperformance Want to send something? GT P.O. Box 1627 Rio Grande City, Tx. 78582 Contact Me: Scyadaias06@gmail.com
Пікірлер: 142
@zoltarzoltar41992 жыл бұрын
Two mysteries that astound, The science of the universe and the science of spray painting.
@garycotz563 Жыл бұрын
that 2:1 ratio worked out great for me... primed up a big pontoon trailer and it went great... my first time doing it so thanks for the tips. Really impressed with the RustOleum primer too, I used 1/3 gallon for two coats of primer.
@Unknown-dc3wm3 жыл бұрын
You make everything so simple and peaceful without stress thank you for you’re hard work
@MakeItWork4133 жыл бұрын
Yes, this exactly! Thank you.
@believer98493 жыл бұрын
Primed painted my 86 Toyota truck 10 years ago with rattle cans white from rust oleum . I just touch it up as needed looks brand new every year.
@Mikefngarage3 жыл бұрын
that primer holds back rust really good. The only thing to know is you need to let it dry for a very long time like about a month then recoat the primer with urethane primer before putting on automotive paint. If you dont do that you may have problems with fisheyes or wrinkling of the automotive paint.
@lonewolftech2 жыл бұрын
Never had a problem top coating it after 48 hrs. But I also just use the rustoleum enamel
@Foche_T._Schitt Жыл бұрын
Mixing enamels and urethane probably not a good idea until fully cured.
@cyclebuster Жыл бұрын
i put this trash on my truck over a month ago, still not sandable
@guccimane5752 Жыл бұрын
I was thought that it needed to be sprayed over rust and rust only
@Spiritof_762 ай бұрын
@@cyclebuster It's supposed to be a non-sanding primer used for farm and other outdoor crap, not for automotive paint.
@troysgarage4 жыл бұрын
I like how it hides a lot of the imperfections. Looks cool and that color actually is growing on me. 🙌🏼
@floridagirl90643 жыл бұрын
Its a primer
@diesel961 Жыл бұрын
@@floridagirl9064what Happena if you don't use a primer? I'm trying to paint my semi truck chassis but I'm thinking of saving $50 bucks and just spray the enamel. It's pretty rusty tho
@self-madejacobo82819 ай бұрын
@@diesel961it might not bond well to the surface , especially if there’s still rust
@chromemutt3 жыл бұрын
Retired from paint shop two years ago but miss doing this stuff, loved it after a couple of coats and good rub down how good it came up , nice vid thanks
@danbasta36773 жыл бұрын
Needs painted on the inside of the feners to. Or, better yet, coat it with either black paint, or tar to keep the inner fender from rusting from inside out.
@anthonysinclair57213 жыл бұрын
Love watching your painting thing happen! Your cinematography and tunes are great too! The bugs were a nice bonus! lol 👍😎
@mini_worx4 жыл бұрын
I used this primer on a set of rims for my '56 Beetle and then painted Rustoleum Sand Beige on top with a spray can clear coat. They came out great. I wasn't sure how the dark brown would affect the final color of the lighter beige but I rally think it made it "pop" out even more. Great product. Keep the vids coming bro!
@StevenRathburn3 жыл бұрын
I’m going to subscribe because I have watched like 80 videos trying to figure out a decent mixture ratio to use with the rustoleum and you say it within the first couple minutes. Instead of making some 30 minute long video that never really says how to mix or what ratio to use Thank you!!!
@williamcharles94804 жыл бұрын
In this day and time Rustoleum is about the only affordable paint anymore. Some of us can't afford to spend a hundred dollars for a gallon of automotive primer just for a daily driver.
@GTsPerformance4 жыл бұрын
I just bought 12 quarts of rustoleum at $1 each (found them on clearance). Last time I painted my Mitsubishi, it only took 3! Very affordable and reasonable paint
@mr.klutchrednose27003 жыл бұрын
FUCK THAT'S CHEAP 😁😁😁😁 THEY LIKE $9-11 N SALINAS KALI4RNIA....N ALSO SUBSCRIBED 2 YOUR CHANNEL MY YOUNG 🧒🏿🧒🏿🧒🏿🧒🏿 BROTHA
@s0l1dsnak33 жыл бұрын
My reducer, hardener, gun wash, mixing cans, paint filters and mask tear offs cost 3 times what my rustoleum did. Kinda want the extra durability on bumpers though
@axd2312 Жыл бұрын
@@GTsPerformance Does this apply to red oxide primer as well?
@solluna2155 Жыл бұрын
Dude, the rust oleum primer that he use is better than those expensive automotive primers, I paint a cross member 7 years ago on my 4runner I use the exact type of primer on the video still holding strong after 7 years of daily driving and off-road.
@comawhite821Ай бұрын
I don't restore cars but your video was very informative for a beginner using an air sprayer. I rehab old metal carts, cosco stools and any other mid century treasures i can find.
@croysha42599 ай бұрын
This summer 2024 I'm taking my jeep XJ to this primer color and slapping clear coat over top of it. This video made it look so easy
@dantejaiudijr27923 жыл бұрын
It's only primer? It's more that. This gentlemen that's doing the work and spraying, TAKES PRIDE IN THE WORK. If the priming and body work came like he's showing Us, than the finish paint job will come out looking great as well. That's pride at its best !!! I can't wait for the finished vehicle. Outstanding job!!! 🤓👍 A++++ work ethic!
@wansolve20364 жыл бұрын
Look into Rustoleum's Hunter Green for that truck. My uncle had an old 55 Ford truck with that color and it looked great! A lot easier and less expensive than trying 2 stage paint. Great work!
@AndysDogHouse4 жыл бұрын
Nice job on the priming. I just watched your pain with flat black then this one. You are teaching me a lot. Thanks for sharing.👍😷
@ole_mcd_farmn33574 жыл бұрын
Parked at rest area @ Salado, Tx. Was about to leave then I noticed you just posted a video so had to watch it first. 👍
@GTsPerformance4 жыл бұрын
Yes, brother! 💪😎
@HFG3 жыл бұрын
That layed down better than I thought it would. Nice
@MorninTripper4 жыл бұрын
Thanks for the video! Excellent process and techniques shown to help others see how it's done right. Glad I found you. Will be watching many more of your vids.
@Grant74 жыл бұрын
Primer makes everything look better... lol....keep up the good work
@adamvalenzuela6626Ай бұрын
Great job! I have used rustoleom oaint on my truck. The only thing that bothers me is the sound of an oil less compresser. Thanks for the video.❤
@rickspaint28044 жыл бұрын
Came out looking good homie cant wait for the next videos
@PLP-DIY6 ай бұрын
If you use an airless/electric sprayer like a graco 390pc you don’t have to cut it at all. I’ve sprayed tons of different paint only thing I’ve ever done is add water on top to keep some from drying in the bucket as I spray.
@barrygalerno700 Жыл бұрын
Thanks for sharing. Fantastic info. I will eventually be using RUSTOLEUM to paint a very 'rough' 1940 Dodge pickup. Bad metal. Simply want it 'flat black' or brown PRIMER. You helped a LOT !!! Thanks from Canada !!!
@markgarcia47854 жыл бұрын
Nice! Makes me miss my 64 BigWindow. Keep em coming bro.
@cliffolds10894 жыл бұрын
Got to love not having rusted out bolts on fenders makes a job soooooo much easier
@AA-bs9pl7 ай бұрын
Nice video i feel like once metal gets rusty it’s never the same again no matter how clean it looks. Rusty metal primer probably is a good idea if rustoleum makes it you’d think it’d be something they do right. Never tried rustoleum in the regular cans but as far as the spray cans the rustoleum regular primer and filler primer spray cans from Home Depot worked surprisingly well for me and only $7 and 9$ each. The filler primer dries instantly pretty much and took metallic sherwin Williams atx auto paint really well and really stuck to the metal underneath compared to some Upol primer that chipped off easily. The regular rustoleum primer was good too just needs to dry for at least 2 days.
@blindsspecialist327 Жыл бұрын
It did work, I brushed mine on, no dilution, per the can’s instructions. Lil tough yet effective at n rust!!!
@3Wheels1Block4 жыл бұрын
YES!!!!!! Thank you for this! Great how to! You covered this very well!
@Marcoosianism4 жыл бұрын
Nice job. My only comment would be you might have gone a bit heavy on the first primer coat. The first coat needs some restraint and should really only be a very light mist - what they call a tack coat. After 7 min or so you can do a little heavier second coat.
@aguilayserpiente3 жыл бұрын
The rusty metal primer works. I can vouch for it.
@oldowl42903 жыл бұрын
Being that no bodywork was done, no dents pulled or filled, etc, I would argue that after the sanding it would look really good with just a satin UV clearcoat and nothing else. Also, why use the red rusty metal primer and not just the Rustoleum white metal primer since this metal looks really clean?
@chevybel62874 жыл бұрын
I really enjoy watching your work man!!! Keep up the good work!!! God bless...
@JoesBusBarn4 жыл бұрын
I really like the way u added sound effects when u mixed and poured the paint. Lol. Nice vid bro. That primer color goes with the truck.
@byrnejr4 жыл бұрын
Nice job. Keep it up
@joefrieson51004 жыл бұрын
Looks good bud.
@vincentnichols4023 жыл бұрын
I paint under my car with it for years no rust, or holes in my floor pans my vehicle is 38
@robertkees60483 жыл бұрын
I wish they would always print "oil based paint" on the front like the gloss black I'm going to use on my wrought iron railings. I didn't realize it and tried for just a second to clean the brush in the sink. Not a big deal, but it seems like something all oil based paints would show. Guess I should have known or checked, but what with all the drinking, heavy drug use, and merriment I neglected to take that step. Oh well, that's life!
@joepacheco40383 жыл бұрын
Just curious why did you use a primer for heavily rusted metal on a parts with little to no rust. Was under the impression that rusted metal was needed for adhesion similar to Por 15.
@grapplergirl102 жыл бұрын
I wondered the same, but I recently took most of a poor paint job off of, and wire brushed 99% of the rust off of an antique metal sewing machine table base. I foam brushed on this primer (chose it due to its color and feel for this specific project) and did have a little trouble with it sticking on mostly smooth metal on the first coat, but by doing a thin coat twice, it stuck great with nothing coming off while handling or wiping it clean. Black paint looks great over it, and I’m able to leave a few protected but “rusty looking” places peeking through the paint all while keeping it protected for another century.
@QQTrick1QQ4 жыл бұрын
Laid down nice, sent a few trinkets, hope you can use them. Maybe Fri delivery. I'll send tracking # when I get it.
@GTsPerformance4 жыл бұрын
Absolutely bro, thanks for sharing! Any bit of help is greatly appreciated
@brandonlure27384 ай бұрын
Why did you use a 2:1 ratio when the instructions on the directions say to add 15% acetone for spraying?
@rudyflores93954 жыл бұрын
awesome sir looking forward to the next video
@AngryBengry3 жыл бұрын
💡thanks for the entertainment and knowledge
@kaneetsate16624 жыл бұрын
Good video bro, hey you should do a review on your compressor. Nothing on KZbin especially for painting. Been looking into getting one.
@davidboston45743 жыл бұрын
Great job man!!
@GrowLLLTigeRRR2 жыл бұрын
Beautiful
@miket12264 жыл бұрын
This foo! Haha that fly talking mess bro? 😂doing a good job bro keep the videos coming.
@borna4303 жыл бұрын
My understanding is the rusty primer shouldn't be used on a clean metal since the ingredients are made adhere to rust and not so much to a clean metal. is better to use WHITE CLEAN METAL PRIMER which is made for clean or lightly rusted metal. Any suggestion on this?
@bugnut823 жыл бұрын
This is what I have been researching for weeks as well. Have you found out anything yet? I have a quart of the RMP And wasn't sure if I should use it on my cleaner metal. I have read several folks using the RMP on clean metal for years and topcoating with no issues. But, who knows ?
@borna4303 жыл бұрын
@@bugnut82 What I found, short term you will not see any issues. in a longer term between 1 or 2 years it will impact you job. If there is not enough rust, the fish oil in the RMP will raise and eventually causes bubble and mess up your paint job. so for $8 better to not use it.
@ymg200 Жыл бұрын
Could you post an update how well this primer held up over time. Did rust return? Thank you.
@RiggsGarage3 жыл бұрын
Subbed. It's satisfying to see old metal getting fresh paint How do you like that compressor? How well does it keep up with the gun? thanks
@mikeypops733 жыл бұрын
Nice work
@jonromo19764 ай бұрын
Im about to primer my project car. Using resto tractor primer, do i only need to reduce to make it sprayable? Or do i need to reduce it and add hardner?
@fishnfreak184 ай бұрын
Is this stuff considered sealer primer? Would like to prime my truck with it to stop it from rusting and then paint it in the future.
@kravmaga70703 жыл бұрын
why wouldnt you do the entire rear of the panels for preventing rust from coming thru from backside?
@GreasyAssCrack2 жыл бұрын
Thank you for this video bro
@danrooney37043 жыл бұрын
Thanks for the video I'm going to be painting my engine bay and this helps a lot. Question though how long should I let the primer dry before I spray the color?
@edwardriley4923 Жыл бұрын
Does white Rustoleum paint cover that color primer good, without making the white look darker?
@LukesGarage3 жыл бұрын
What about an in-line dryer to dry the compressor air and filter oil out. What pressure are you regulating it to.
@almierz46043 жыл бұрын
I THINK YOU NEED ANOTHER QUART ON THAT FENDER
@thefiathospital7 ай бұрын
did you use a hardener? most people say the rustoleoum reacts with a normal top coat automotive paint.
@georgenettlesjr14664 жыл бұрын
Every time I use this primer. Matte top coat runs brother. I do it right away or after 48 Hours makes no difference.
@carlrenninger69913 жыл бұрын
You had that to pretty clean metal , I’m not picking on you try etching primer , two light coats then clean your gun , and do primer filler.
@cliffolds10894 жыл бұрын
Looking food so far brother
@ghyslainvallieres22093 жыл бұрын
Hi GT, i’m from Canada, i have a Dodge D100 1957, it need to be bring back to bare métal and prime + paint. M’y questions: Between the primer coats you sand with wath grid : And thank’s for the videos it help me so much!
@GTsPerformance3 жыл бұрын
I sand the high build primer with 320, then usually finish with 400 before I continue with sealer / paint.
@318lotis4 жыл бұрын
good video. do you spray only one coat, and do you sand before applying topcoat?
@fishhuntadventure4 жыл бұрын
Of course you sand before topcoats lol
@phiksit4 жыл бұрын
They make that stuff in a 24 oz can with the turbo nozzle.
@mini_worx4 жыл бұрын
They do? I only found the Turbo cans in Black, White and clear. Thanks!
@phiksit3 жыл бұрын
Menards carries it... about $10 a can (24 oz.)
@BrokenSmokinSpokes11 ай бұрын
How long after can you topcoat it with rustoleum low gloss enamel? Can I topcoat it within an hour or should I wait 24?...Wanna get it done.
@bonniedust34523 жыл бұрын
Why to younger people put so much emphasis on the last word in a sentence? Also, watched your video spraying the truck flat black. You adjusted your air pressure settings at the compressor. A better way is to adjust it with a regulator at the gun. The length of the hose changes the pressure. The final result looked good thought.
@diesel961 Жыл бұрын
Will this work on a semi truck chassis? The black enamel on top? Will greatly appreciate your response.
@rohitendrachand72668 ай бұрын
Can I use it to spray on Bondo work before painting
@robert40054 жыл бұрын
How well does the rusty metal primer work on clean metal?
@davidbahr96124 жыл бұрын
Better
@moonlightfordf1005 Жыл бұрын
Can this be brushed/rolled on right out of the can? No hardner or anything is needed?
@coffeefish3 жыл бұрын
Will you spray Rustoleum color over that primer? I think that when you put down that primer, your top coat options become limited. That's the issue I ran into.
@russellpsi Жыл бұрын
what product of theirs can be used for white top coat---im looking to DIY old vehicle
@filibertomarmolejo14822 жыл бұрын
Nice!! What size air compressor you are using?
@mini_worx4 жыл бұрын
I'm planning on painting a horse trailer Rust-Oleum Almond Beige. Should I use this primer even though it's so dark?
@rodneyhoskins81873 ай бұрын
Rusty metal can go on bare metal too?
@ballsdeep96483 жыл бұрын
Why acetone instead of mineral spirits?
@josepreciado53123 жыл бұрын
What size air compressor and brand, also oil or non oil are you using?
@robertvega41364 жыл бұрын
would you recommend this over POR 15? i'm about to paint the whole bottom of a car
@matthewharrelson60764 жыл бұрын
Anything is better than por15 in my opinion.
@zachary37773 жыл бұрын
Look up mastercoat permenant rust sealer. It is far and away the best. Eastwood platinum is basically a copy with the price jacked up.
@wymansst3 жыл бұрын
FWIW I did rustolem rusty metal primer with a brush on the underside of my 78 Fairmont wagon about 8:years ago and top coated that with hammer tone rustoleum. It came out awesome. My experience with por 15 is that is encapsulates rust but it doesn’t really stop it and the cost vs value is not so good. I’ve also been able to go back and peel it off of stuff I had used it on. Fluid film or something like that works awesome as well for persevering an undercarriage.
@billydog151211 ай бұрын
Can you paint lacquer over top of that oil based primer?
@AndysDogHouse3 жыл бұрын
Hey GT. IS IT NECESSARY TO PRIME WHEN USING RUSTOLEUM PAINT? THANKS FOR SHARING.🍁👍👍
@pcorps9992 жыл бұрын
Did you paint all in the video with just the amount you mixed?
@9camper2 жыл бұрын
And for a full car (Acura integra) how much primer and thinner should I use ??
@4dirt2racer03 жыл бұрын
u used a 2:1 ratio with 15 ounces of paint n 5 ounces of acetone.... ??
@StevenRathburn3 жыл бұрын
Do you use the same ratio for regular rustoleum paint?
@damensutherland7081 Жыл бұрын
Does this primer hold up good
@georgespangler15173 жыл бұрын
Just don't make sense to sand it to bare metal and prime it and will have to sand to bare metal again to fix and fill all the dents,,
@icarolaureano82263 жыл бұрын
What do you use to remove all paint?
@robertaltomari22602 жыл бұрын
What psi did you sprat at
@anthonymoy44712 жыл бұрын
Is this a top coat or a primer?
@glennshotrodgarage55094 жыл бұрын
What happened to the camaro ?
@Domistroit3 жыл бұрын
En México no lo venden
@albertosanchez3974 жыл бұрын
A. Cuanto. Calibras. T. Tu. Pistola. Para. Pintar
@digitalmixer4 жыл бұрын
hello I want you to know I was using a Harbor Freight spray gun but your Kobalt looks and sprays a lot better how much did you buy that for and how long have you had it and do you recommended for base coats
@BlueCrestRealty14 жыл бұрын
What spray tip is that?
@MrTeckmanish4 жыл бұрын
Spray gun?model?
@monstersquashracing4 жыл бұрын
✌️
@jameymote45984 жыл бұрын
✌ 👍 👊 😎
@danbasta36773 жыл бұрын
Scrap the advertisements, not interested in advertisements. I wanna see how this gets primered.