LG Washer OE Error Code - LG Washer Not Draining Fix - LG Washer Drain Pump Replacement Tutorial

[@pauldennis1241]

I wish everyone who posts "how to" videos would watch this one first! Very, very professional! Instructions were very clear, camera work and lighting were excellent, audio was excellent. You must have taken a lot of time to produce this. It was a pleasure just watching you do this project. So organized. Learned a lot from your technique. Thanks

[@digitalcamproducer]

You’re welcome! This video did take me a long time to shoot it. I wanted to show every part I was removing so it’s clear how to do this repair. I also had to stop and wait 2 days for the spring expansion tool to arrive. I initially tried to do this without the tool. Then I had to tell viewers that the tool is absolutely necessary to finish the job. Thanks for watching!

[@joncecilevillasanta4606]

Thank you very much for this instructional video. Easy to follow!

[@cecilsmith1531]

Awesome video. Thank you.

[@lucescuemanuel]

Yes awesome video! Thank you for your help

[@elizabethdaley8160]

I'm a 59yr old mother of five and Nana of four, and I just fixed my washer all by myself! thanks to you!

[@digitalcamproducer]

Excellent! Thanks for sharing your success story of repairing your washer! Glad you saved money doing it yourself! Thanks for watching!

[@LesKutasi]

Thank you, thank you!! We had a service man come out, but he didn't have the replacement pump and told us to order it on Amazon and he'd come back to install it. I must pay him for coming out to assess the machine and to thank him for providing the part number required, but since I had to wait for the part I went on KZbin to assess the installation process and found your video along with several others. I must commend you on the detailed instructions and outstanding video your put up. I decided to attempt the installation, purchased the spring extender you recommended, and replaced the pump myself in a couple of hours with my wife managing the screws. I wish others would follow your example on how to create a useful video with step by step instructions that almost made the installation process look easy. Thanks for taking your time to make the video and share your knowledge.

[@digitalcamproducer]

You’re welcome! Thanks for sharing your story! So even the repairman orders his parts from Amazon! You still saved a lot of money even though you had to pay for the diagnostic appointment. Nice work by the two of you! Thanks for watching!

[@stacybriggs8861]

THANK YOU! As a single female, home repairs are always a stress point. I watched your video over and over as I was doing it. Not as easy for me but still completely doable. I'm proud of myself for not being afraid to try, completing it and having the confidence to do it again should I need. Again...thank you for making this easy to follow.

[@digitalcamproducer]

You’re welcome! I enjoy hearing how people are able to fix their washing machine after watching my video. This is definitely an involved process but I tried to show it step by step to make it easy to follow along. So glad you were able to do it yourself and save money! Thanks for watching!

[@26PurpleMonkey26]

Same here!!!! I'm trying to figure this out!!!! Thanks for giving me hope!!!!!

[@saintpaul2577]

All of the other women In my family laughed when I said I was going to do this myself!! You made this super easy and I am washing my first load now and it’s super quiet!!! Thank you for this video!!

[@digitalcamproducer]

You’re welcome! Wow! I’m glad you were able to show them you could do it yourself! Nice work!

[@willendsley1192]

As a retired television production teacher I appreciate the quality of your work. Great job plus you solved my washer problem.

[@digitalcamproducer]

Glad you got your washer fixed! I’m actually a professional broadcast video producer. Been in television almost 30 years! But I still remember my video instructor in college say “television is the medium of close ups”. These days I say “video is the medium of close ups”. That line is one of the main factors I take into consideration when I shoot my videos. I like to show the process up close (using a macro lens if necessary) to show in detail what I’m shooting so the viewer can follow along as if they are looking through my eyes. Especially with tutorials! I want to show each step with as much detail as possible! Thanks for watching!

[@mattmcginnis2786]

This is the definitive video to repair this issue with LG washers. I'm on my third drain pump now and simply followed the instructions with the parts from Amazon and we're back in business. A big thumbs up on this video!

[@ddbc5831]

Thank you so much! Sitting here listening to my washer drain so smoothly during a wash cycle. This is a flawless video. Anyone can do it after watching your instruction.

[@donspencer2721]

This saved me $500 or more in repair bills. Thanks so much for making the video.

[@digitalcamproducer]

You’re welcome! Yes doing this repair yourself save you at least $500! I would say you saved more! I know it looks intimidating at first but it’s not too difficult to do. Nice work!

[@skwepwelot]

I just did this repair. This is absolutely one of the best "how to" videos I have ever watched and used. I could not have replaced the defective water pump in my LG washer without first watching Nico's video. My model LG washer is a WM8000HWA. I would add one additional recommendation: be sure to note (and mark) the orientation of the pump to the pump assembly before unscrewing and removing the pump itself from the assembly. This is at 5:35 of the video. On my pump assembly, the new pump can be reinstalled in a variety of different orientations so this will ensure you don't install it at the wrong angle. Don't be afraid to do this repair - this video is very accurate and makes it clear on what to do. You will save a lot of money and time. And do follow Nico's excellent hints too! Thank you.

[@digitalcamproducer]

Excellent advice on marking the pump orientation before removing it. I made a mention to take note of that but physically marking it with a sharpie is a fool proof method because the pump does have to be attached in a specific way. I made a mental note and I knew I had my video footage to rely on. But thanks for your tip which I’m sure will help others!

[@JesusPerez-om5vu]

Is your washer the same as the one of the video? Mine is it I’m trying to get the model to order the pump

[@MTrain-jt2yz]

Oh, and dont leave your work light inside when attaching front cover. :-) (Yes I did. Only started the second screw, but I did.)

[@TexasJoeHotdog42]

I made the mistake of not marking the orientation but you can use the witness marks from the screws to get it lined back up correctly.

[@rainerblaesius9372]

I just replaced the pump using your instructions and have to agree with all the positive comments. You saved me money, aggravation and likely also injury....This is the best "how to" video I have used, if there was an Oscar for "how-to" youtubes I'd totally support nominating you!

[@digitalcamproducer]

Excellent! I’m really glad to hear you were able to repair your washer yourself and save money! It’s not too hard to do once you see the process! Thanks for watching!

[@skyviewchronicles3002]

exactly what i needed, my kenmore is identical, i am a handy guy, farmer. carpenter, etc but would never have figured this all out without your help, or a complete service manual. You made my day, now if the new pump works.....

[@digitalcamproducer]

So glad my washer pump replacement tutorial helped! And since you’re handy this should be no problem for you!

[@alxusn]

This is how you make a how to do it yourself video....straight to the point...detailed....easy to understand ...clear and articulately said. Thank you very much sir !

[@digitalcamproducer]

You’re welcome! I’m really glad my washer pump replacement video helped! This video is a bit longer than my usual videos but was necessary to show the whole process! I never add unnecessary content and my viewers definitely appreciate it! Thanks for watching!

[@davidashcroft4852]

I watched your video several times and decided I could not afford to throw out my LG washing machine. So I ordered the part and the tool to install the wire. You are awesome. I completed the pump replacement and my machine is working perfectly. Thanks a million. PEOPLE PLEASE CHECK YOU POCKETS before doing a wash... All the best. David.

[@digitalcamproducer]

You’re welcome! I’m really glad you were able to replace the pump yourself! It’s not difficult but there are a lot of parts to remove first. Glad you saved money by not having to call a repairman! Nice work!

[@saltytraveller]

Well done. My wife had gotten a quote of $400 just to change out the door gasket. We put up with the moldy door until the drain pump went out. Thanks to you, I replaced the pump and the gasket today. Excellent video.

[@prewitth]

This was so helpful in fixing my washing machine. You walked me through tearing apart the machine, fixing the issue and walked me back out putting it all back together again. I was going to have my husband fix it but once I watched the video I said “I can do this with this guys help!” Thank you for taking the time to video this tutorial!

[@digitalcamproducer]

Great work trusting yourself to do this repair! It helps to view all the steps beforehand! It can seem intimidating with all the parts that come out but staying organized with all the screws helps! Thanks for watching!

[@jonwinship9099]

Outstanding KZbin tutorial. Following your detailed instructions, I was able to replace my LG frontloader's broken drain pipe motor in a few hours at a cost of $43.68, including the purchase of a spring expansion tool. I can't thank you enough.

[@jeffreinardy7570]

AWESOME! Took this on with my wife tracking the screws. Your video was precise and concise. Worked out perfectly! I am mildly mechanical at best, but you made this a very accomplishable project. Took about an hour. Thank you!

[@digitalcamproducer]

Nice! You saved time and money by doing this yourself! Nice teamwork on your end! Nice accomplishment! Thanks for watching!

[@Jenpepper]

Thank you, thank you, thank you. Not only did you save me a bundle in repair/replacement costs (husband wanted to replace), but you’ve restored my faith in KZbin instructional videos. Concise and to the point, no long expositions or annoying music. Truly helpful material, and the experience was a confidence booster to boot. Subscribed!

[@digitalcamproducer]

You’re welcome! I’m really glad my washer repair video was helpful! In my videos there’s no need to add unrelated content. I like to make my videos as short and concise as possible. But this one is longer because there are a lot of steps involved. Also thanks for subscribing! I really appreciate it!

[@feedus1]

Thank you so much. You are a life saver. We came home from a long trip and no clean clothes to a broken drain pump. Repair company was at least 3 day wait... I got it done thanks to you in 24 hours (and amazon).

[@digitalcamproducer]

Nice! Thanks for sharing your experience! You got it done faster and way cheaper than a professional repairman! Great work and thanks for watching!

[@MTrain-jt2yz]

Thank you sir! Much appreciated. No LG repair guys around here for 80 miles. Can not imagine how much this would have been. Almost entertained buying a brand new washer. Your video prevented that. Great angles, editing, everything really. Thank you!

[@digitalcamproducer]

You’re welcome! Yeah it would probably several hundred dollars to have a repairman replace the pump! Plus the markup on the parts would drive the overall cost even higher! So glad you were able to make the repair yourself and save money! Thanks for watching!

[@guadalupezuniga506]

My partner and I had never attempted these types of repairs.Your video was easy to follow, detailed,and extremely helpful to us.thank you

[@cjbdb]

THANK YOU!!! This gave me the confidence to try it on my own. The fear of what we don't know is what holds us back from trying to do things on our own and coming to know how to do it ourselves. It was as easy as it looks, except for a stripped screw, (probably from a previous repair man), that I had to get off with some patience and time. I was able to get the pump switched out by myself, with the help of my daughter, which brought us together and also taught her how to do something I wasn't taught as a kid, which is how to fix our own things. Thank you for being a teacher and showing others how to do this. The confidence gained to do something unknown is the biggest thing gained.

[@digitalcamproducer]

You’re welcome! So glad you and your daughter were able to do the repair together! I’m sure it was a learning experience and a bonding experience for both of you. It definitely helps when you can see someone else do the task first. For me I was doing this for the first time while I was shooting the video. So I was learning as I was going. But I had a feeling that others would find it helpful to see the process. Plus it saves a lot of money doing it yourself. So glad your repair was successful!

[@goldeneagleeyed6083]

We just wanted to give you a huge SHOUT OUT for just helping us save hundreds of dollars, I am so glad I came across your amazingly detailed video of this repair. We did everything you said, right down to the spring expander tool (so important!) and 2-3 hours later, we have a working washer again!! Thank you so much for taking the time to post this repair video… and helping people who had no idea that we would be capable of fixing something like this, you were with us every step of the way!! … After Joe Roberts buys you a beer, we’ll be buying you another round!! THANK YOU again so very, very much!! 😊🙏🏼

[@digitalcamproducer]

You’re welcome! Makes me feel like my time was well spent making this video when I hear stories like yours. I’m really glad you got the repair done and saved money doing it yourself! Thanks for watching!

[@tamatoa8261]

I should've watched this video first before ordering the drain pump. None of the other videos mention the spring clamp tool. My replacement pump came with an O-ring, but I didn't see you replace one. As others have already mentioned, you're camera work is what separates your videos from others. You actually SHOW what you're doing in a close up.

[@digitalcamproducer]

Yeah I didn’t have to deal with an O-ring on my pump. I literally took it out of the box as-is and installed it. I appreciate you noticing my camera work! There are too many videos out there that don’t show the detail of what’s being done. It makes a huge difference when I show a close up letting viewers see exactly what I’m doing. When I get my shots I like to show it like it’s actually in your hands so you can see it all more clearly. Really glad you got your pump replaced! Nice work!

[@steveblack2568]

Thank you so much for this video! For the past week or so during the drain cycle, my washer was making a terrible grinding noise. It would finish the cycle, but this morning with a load full of laundry, I got the dreaded OE message. I had already known about this video before it actually stopped working (I'm anal that way) and I was fortunate that a local parts supply place had the pump in stock along with the spring tool. I'm 65 years old, and in the past seven years it seems as though my washer had glued itself to the floor. Moving the washer into a position to work on it was the most difficult thing for me. Your tutorial was perfect, and it only took me about 2 hours to do the repair once I started working. 10 stars, and 20 thumbs up for this help! I'm now kicking back enjoying a celebratory Scotch👍🍻👍 Thank you, thank you, thank you!!

[@digitalcamproducer]

You’re welcome! I’m glad you were already familiar with my video! On my washer I got very little notice before I got the OE error code. The fix is kind of simple yet quite involved. It’s nice that you were able to find a replacement pump locally including the tool! Being able to fix it yourself is definitely a cause for celebration! Thanks for watching!

[@MichaelDavis-rf2bg]

This was a great video and helped me immensely! Thank you very much for creating it. Was extremely easy to follow, and the pace of it was perfect. Sometimes people go to fast and you either miss things or have to constantly "rewind" to catch a critical piece. With your video I was able to watch, pause, perform the step, then continue. Excellent!! A $25 part and your video saved me $500!!

[@digitalcamproducer]

So glad you were able to follow along with my tutorial! It definitely saves alot of money doing it yourself!

[@dano7476]

Thanks! I had booked a repair guy - $120 for the visit and diagnosis plus more for the parts and labor. It took my an hour to disassemble and half hour to reassemble. I’m still waiting for the spring tool to finish that last piece. I only had two hoses and two wires instead of four connected to the pump. Very detailed and thorough. Thanks! I was going to take the gasket off completely and clean it but was afraid I wouldn’t get it back on the right way.

[@jdcogar180]

Thank you so much for this very helpful video. My husband and I were able to repair our washer and it works great. We saved hundreds of $$ by watching this. We live in an area where there doesn’t seem to be any repairmen. For $60 we were able to make our washer work like it did before.

[@digitalcamproducer]

Excellent! Definitely saves a lot of money doing this repair yourself! It looks a bit intimidating but not too difficult to do. Thanks for watching!

[@hasaniblackwell5962]

This is the most detailed and easy to follow repair video I've ever seen for this problem... there are several floating around. I was able to follow this and the machine is now working. My only recommendation is you mention all the required and optional tools at the very beginning of the video. You saved me $500 and encouraged me to self repair other things around the house that I would have probably thrown and and purchased. Thank you so much!!!!!!!!!!

[@digitalcamproducer]

You’re welcome! Glad my video was helpful! Yeah mentioning the tool in the beginning would be a good idea. Nice you saved a bunch of money doing this repair yourself!

[@rosemariekepler6107]

I am a 71 year old female. Because you have described this so very well, I think, I can do this myself. I did buy the tool to pot the spring back on. Wish me luck!!!

[@digitalcamproducer]

Good luck on the washer repair! You can definitely do it! It seems intimidating but it’s not that hard to do. Just lots of screws! You’ll be glad you fixed it yourself! Thanks for watching!

[@brigidcleary1357]

I’m a 67 female and I did it! Husband helped with that infernal wire around the gasket, (we used a couple of zip ties to pull the spring apart instead of the specialty tool pliers). Warning: Definitely a 2 person job without the pliers. Go for it! I believe in you! How did it go??

[@normstangl3499]

This video was brilliant. I managed to get the entire job completed by following the steps illustrated here. Upon re-assembly I didn't have the spring spreader tool. I determined that if the left side spring is in place over the gasket it will stay in place. You can then stretch the right side of the spring with a screwdriver, then guide the wire into place by hand on the right side without any issue. Just make sure that the retaining wire is inserted as best as possible all the way around the gasket. Then only about the last 1/3 of the wire to the right of the spring needs tucking in. This video is very clear and self explanatory. I saved quite a few bucks in repair cost to spend on myself following this guide. 😁

[@pcj7thirteen]

Seriously the most helpful repair video I've ever watched. Took me less than an hour. If you don't want to or just plain didn't by the spring ring tool, an alternative is two sets of hands and a bike tire lever. Have one person hold the ring really tightly at the furthest locations you can get it to by hand and the other person start at one and slowly run the tire lever along the ring. Worked for me after a half dozen tries.

[@digitalcamproducer]

Really glad my washer pump replacement tutorial helped! And thanks for sharing how you reinstalled the retaining ring without the spring expansion tool! A few viewers have also made workarounds like you! Glad it worked!

[@carlos.75]

You sir are a life saver. This will save me a lot of money the wife was asking for a new washer. She probably don’t like you much since now she will have to keep the old washer a bit longer. 😂 thanks

[@digitalcamproducer]

Yeah now you don’t have to buy a new washer! You even saved money by not having to call a repairman! Glad my video helped!

[@robdouglas020304]

God bless this man! You saved me from dragging my washer to the curb and buying a new one! Great great great how to video! Thanks bud!

[@digitalcamproducer]

You’re welcome! Really glad my washer pump replacement tutorial helped! Really saves money when you can fix it yourself! Thanks for watching!

[@deanahill4529]

Thank you. I just ordered the drain pump from amazon and I will watch again before beginning the repair of my LG Washer. Thank you. You are so easy to listen to.

[@digitalcamproducer]

You’re welcome! Glad you were able to order the replacement pump! Hopefully you got the spring expansion tool too! It makes that last step a breeze. Others have reattached the spring using other methods but I was not able to without the tool. The repair is fairly easy so I’m confident you can do it! Thanks for watching!

[@tammyshannon1888]

Thank you for your very thorough video. I was able to watch it, order the parts and tool and have it on hand for my husband to fix in less than an hour. Your video saved the day!

[@jackyjack99]

Thank you. I followed the video as i was doing it from the beginning to the end. I’m happy I was able to repair it myself but I’m disappointed that this is an issue that is supposedly normal. I wouldn’t have expected any repairs whatsoever before at least 10 years. This happened after four years. Thanks again for the detailed instructions and clear video angles for each step.

[@ameliaearhart6991]

My washer stop draining and was making noises so I found this video and was able to repair it. I had my husband help me put the ring back on so I didn’t need the spring tool. If you’re by yourself I would get the spring tool. I had my lg washer since 2006 and this was the first time I had any problems with it, the inside was a little different but I was still able to follow along. The draining tube had sand stuck in it so I was able to clean it out as well. Now it works with no issues 🤞🏼you saved me $300 dollars! Thank you!!!!

[@sakof25]

Pump replacement was successful. That expansion tool was indeed a lifesaver. I also used it to remove the ring, instead of prying it off with a screwdriver 😅. It was super helpful to have watched the video also for the prep and having all the right tools available as well as the tip to mark and organize the screws. Thanksssss!

[@digitalcamproducer]

You’re welcome! I would’ve used the expansion tool to remove the ring also but I started this repair before I knew I needed one. So this video took extra time to shoot because on the final step I had to wait for the expansion tool to arrive. So glad you were able to get your washer fixed! Thanks for watching!

[@justineb3144]

I am not mechanically inclined but this video was so well done and so easy to follow, I was able to fix my washer. This saved me so much headache and a ton of money so huge thanks to the creator!

[@digitalcamproducer]

You’re welcome! So glad you were able to fix your washer yourself! It definitely looks intimidating but going step by step it is manageable! Nice work! Thanks for watching!

[@jimb2520]

Hands down, the best video on KZbin for this repair. Enabled me to quickly pull the machine apart, diagnose the trouble and make the repair (especially the PRO TIP on how to re-install the bellow). Many thanks.

[@digitalcamproducer]

You’re welcome! Glad my video tutorial helped! I tried to make it as detailed as possible in case I had to do this repair in the future! Thanks for watching!

[@mikesorcinelli1194]

Duuuuude!!! Thank you so much for this video!!!! I'm the least handy man on the planet but I followed your instructions and totally replaced my own drain pump! THANKS SOOOO MUCH!!!

[@digitalcamproducer]

You’re welcome! I’m really glad you were able to follow along with my video and replace your washer pump! Nice work! This was also my first time replacing a pump but decided to document it on video so I’d know what to do if I had to do it again! Thanks for watching!

[@kristiansanchack1324]

This was so perfect! My father in law and I followed this video step by step (after watching it through once). Worked perfect! Thanks for saving us a ton of money!!

[@digitalcamproducer]

Excellent! I’m glad he watched it through once before doing the repair. I think it really helps to be familiar with the process before starting! Glad your father in law got the repair done saving you guys money! Thanks for watching!

[@2islands]

Just want to say thank you for this post. It saved me big time and $$$! The job went exactly as you described & demonstrated. I bought the spring expansion tool for $12 can, and it worked perfectly. Thank you so much for taking the time to do such a complete demo of this repair. I literally was going to buy a new washer because I always have trouble with these front loaders. $58 can for the pump for an LG part. I used your links. This job can be done by anyone who watches this video!!! Great work man!

[@hehohop]

THANK YOU! I am not very handy and normally would just call someone to do the job but no one could come out for several days. The Spring Expansion tool was a life saver and made my final step of reassembly a breeze. I struggled with the bolts on the for literally a couple hours, getting them out and then back in. The bolts just didn't come out, eventually I had to pry out with a screwdriver because the rubber feet had got stuck or affixed in place. Then the base wouldn't tighten down when reinstalled. You mention in your video that it is supposed to have some "play" but I didn't catch that until after completion.

[@digitalcamproducer]

Nice work! Glad you were able to do this diy repair yourself and save money! It does seem intimidating to take all those parts off the washer but it’s not too bad. Thanks for watching!

[@davidcronkhite1392]

Just used this video to replace our drain pump and it was great. Could not have done it without this video. Our model did have a couple of differences like it was important to put back the door lock before bolting the front door to the washer but other than that we were good. Thank you for such an excellent video.

[@digitalcamproducer]

You’re welcome! Glad my washer repair video helped you get your washer running again! Definitely helps to watch the process before starting your own repair job! Nice work! Thanks for watching!

[@joeroberts2481]

Thank you, thank you! You saved us hundreds of dollars by giving us a way to do this ourselves. Your step-by-step instructions were very clear, and we followed them exactly, also buying the spring expansion tool. It all worked like a charm! I'd buy you a beer if you lived nearby. :-)

[@digitalcamproducer]

You’re welcome! Yeah the pump replacement isn’t too difficult to do but it can seem like an intimidating task. I’m glad you got the spring expansion tool and got the repair done! Thanks for watching!

[@sassymexy5655]

I wish I could send you a picture of the wrench and zip ties I used as an “ expansion tool”. I zip tied one end of the wrench to the wire and then zipped tied the other side and then inserted the wire and then cut the zip ties and it worked like a charm. Thank you again for your video and guidance.

[@randydarby2340]

I'm with Joe on this! I just replaced mine today 08/12/21 and I watched your video first ordered parts and spring tool next....2 day shipping....and just 35min I was done from first screw out to last screw in. I owe you a dinner and a beer!

[@rekartda3rd696]

@@sassymexy5655 I could use that picture right about now .. ugh 😩

[@ToledoYoutube1205]

One of my screws to take the front panel off won’t come out:( tips?

[@brianhead5231]

I watched several videos before this one. I really had doubts about trying to do it myself. After watching this one I didn't. It was very well done. I watched it beginning to end, went and bought the part and spring tool, and then watched it in segments as I did the job. It was an excellent tutorial and I want to say thanks for saving me some $$$$. The only place I disagree with the OP is that for me getting the main drain hose back on was the hardest part. But, it might have been the angles along with the pliers I had to use. All in all 10/10 from me. Thanks!

[@digitalcamproducer]

You’re welcome! I’m glad my detailed video gave you the confidence to take on this repair! I didn’t have any problems with my tubing but I can see how it can be difficult with the small space under the washer. Nice work doing it yourself and saving money! Thanks for watching!

[@cardozowagner]

Thank you for showing every single step. I am not a handyman and was able to fix my machine. We just save $1,500 thanks to you!

[@digitalcamproducer]

You’re welcome! I’m glad you were able to save money doing the repair yourself! I wanted to make the video detailed in case I have to do this repair again in the future! Thanks for watching!

[@PS-ff9lj]

Well done - there was no corny, unnecessary commentary that dominates DIY videos. I'm not handy, but was able to swap out the pump. On Amazon - bought the pump for $20, and the spring tool for $12. $32 repair and 90 minutes of my morning vs a new $700 washer, or $300 repair. The hardest part was getting the pump out of the plastic housing. The spring around the window was easy with the "spring tool."

[@digitalcamproducer]

So glad my video was helpful! It certainly saves a lot of money replacing the pump yourself! Nice work! Something you can feel proud of!

[@ivanlawrence2]

Thank you so much! This is one of the best tutorials I've seen! Notes I learned from taking mine apart: 1. the door switch plug is easy to get to once you undo the screws and lean it down toward you, then you can get a hand from the side and the top. 2. For the spring I just used some needle nose and stretched the spring really far, then just rolled the wire over the edge, it was super easy and doable. 3. Plug the wires in while the motor is out and you can see it clearly, I first installed then plugged and didn't get the contacts to connect and bent a lead which caused some unnecessary work. Again, great tutorial, thank you for giving me the confidence to DIY!

[@digitalcamproducer]

You’re welcome! And thanks for the additional tips for this repair! I’m sure others will find your suggestions helpful! So glad you got your washer pump replaced yourself! Thanks for watching!

[@salinasbarbie]

I’m a girly and I did it all by myself ! Great video! 🙏🏻 plus I ove the fact that you made it so easy for us to press the link and buy the part with no struggle. This is awesome! Thanks 🤑

[@digitalcamproducer]

Excellent! I’m really glad you were able to do the repair yourself! It’s not too difficult to do and you save a ton of money by not having to call a repairman. It’s a good feeling of accomplishment! Nice work!

[@TheGleb1972]

Thanks! You are the only guys who honestly said - you need a bloody spring stretcher not to get mad😉! Respect!

[@digitalcamproducer]

You’re welcome! You should’ve seen how many times I tried to get that spring on off camera. I just couldn’t do it so I had to order the spring expansion tool to finish making this video! Probably a one time use tool but necessary! Thanks for watching!

[@TheGleb1972]

@@digitalcamproducer minus camera - same thing with me🙂. Wasted couple hours and had several angry beers lol. Lucky me buddy from work into old car restoration so I managed to borrow one from him🙂.

[@rhoonah5849]

This video was perfect. I was able to take my washer apart, get the correct replacement pump and reassemble everything and it works like a champ! I even purchased the spring expansion tool and as the video stated, it was WELL worth the money because I tried it without the tool and it cost me about 20 minutes of frustration. Thank you!

[@digitalcamproducer]

You’re welcome! Yeah that spring expansion tool is a lifesaver in the last step! When I was shooting this tutorial I had replaced the pump but couldn’t get the spring back on. Had to wait 2 days for the tool to arrive from Amazon. Got the ring back on and finished shooting the video! Even buying the pump and tool costs much less than calling a repairman! Thanks for watching!

[@rhoonah5849]

@@digitalcamproducer That's exactly what happened to me. I took the washer apart one day to get the pump out to get a feel for the job, order the pump, waited for it to arrive, replaced it and then was like "Crap, I can't get this damn spring on" and had to wait 2 more days for the tool. Lol. Anyway, you're right that it was a lot cheaper than replacing the washer or having a repairman come out plus I scored points with the wife :)

[@brittineytrammell1163]

Thank you so much for this video! This is the third time in three years I have watched your video and replaced this pump! I only wish the pump would last.

[@digitalcamproducer]

Wow! You had to replace your washer pump 3 times?

[@BatteringRam7]

Excellent job describing the process! Regarding the ring installation, I was able to get the ring back on using two bike tire levers. It’s a little finicky but possible. The expansion tool is probably an easier method. But in a pinch, the tire levers will work. Just get the ring started on the top half. Place two tire levers in the 4 and 8 o’clock positions. Place pressure toward the machine on the levers and wiggle them down to the bottom and push the spring over the ring retaining lip. Thanks for the video!

[@digitalcamproducer]

You’re welcome! Glad my washer pump replacement tutorial helped! Nice work getting the spring back on without the expansion tool! That’s a great workaround! Thanks for watching!

[@2meters2]

Thank you ! I have the same model, same problem, and your video instructions, I'd have wasted a lot of time trying to figure out how to access that pump. You're a life saver. One note on the spring extension tool, I did not have one, but found out that it's not difficult if you have two people : One holds the spring open with two screwdrivers, the other puts the ring in the grove. Works like a charm.

[@rafaelburgosjr.3547]

Great video. I changed my own pump a couple of weeks ago, before I watched this video. The only thing I would change is to to be sure to Shut off the water before proceeding.

[@michelleknight6731]

Omg this video helped so much. Me & my sister fixed my washer...can't believe it. Thank you so much...single mom of 5.. I so needed this!

[@digitalcamproducer]

I’m so excited to hear stories like yours! Really glad you got your washer fixed and running again! Nice feeling being able to do it yourself without having to call a repairman! Great job! And thanks for watching!

[@PhilandAlex]

Though it took me longer than it took you, it worked!! My Unit had a metal bracket / brace that had to be fully detached from washer to replace the broken part. It didn’t have a quick clip like yours did. Added an hour of frustration, but I got it! Thank you

[@digitalcamproducer]

You’re welcome! I’m really glad you got around a snag that added more time to the repair! But also glad you got your washer fixed on your own without having to call a repairman! Thanks for watching!

[@JesusPerez-om5vu]

I have to order mine do you what’s the part # of the water pump

[@anguswhittaker7690]

Thank you very much. Your instructions are excellent. I taped the screws to paper and labeled them. The spring tool I purchased was 20$ and worked great.

[@digitalcamproducer]

You’re welcome! That tape idea to keep your screws organized is a great idea! I might have to use that in the future! Glad you were able to get washer working again!

[@tdjago]

Great video. Thanks for the info. I saved a few bucks and made my own spring expansion tool with two small head screw drivers and two zip ties. I crossed the screw driver shafts, put a zip tie going in each direction and it worked like a charm.

[@digitalcamproducer]

Excellent work! I think another viewer also made his own spring expansion tool! You guys are very creative!

[@scottciampi2351]

Note: BEFORE STARTING THIS REPAIR BUY THE SPRING EXPANSION TOOL!!! This a really good video but the author states in the beginning there is a trick to getting the ring back on and says he will tell you later. If you don’t watch the entire video before starting you will not know that you need a specific tool. This tool took me a week to get on Amazon leaving everything in pieces. Not a huge deal but if I had known I needed specific tools I would have waited to start the project. Other than that this was super helpful and saved me a bunch of money. I was able to clean hoses and drains, clean the dispenser tray and I removed the entire gasket and cleaned it (these will be cleaned frequently for now on as they are mold farms). Who knows all the other areas mold grows on a high-end LG front loader but wow!!! Not sure if I would buy it again. Thanks for the video!

[@digitalcamproducer]

Yes! Sorry I didn’t mention the spring tool right from the beginning! It should definitely be ordered at the same time as when the pump is ordered. I think I did the video in the order of how I did my repair because I didn’t have the spring tool originally and had to wait until the tool arrived. I was advising viewers to watch the whole video first so they are familiar with the whole repair process before they start. I tried everything to get that last spring on without the tool and then realized I really needed it. At least for me it was 2 day shipping. But I’m really glad you got your washer working again! Thanks for watching!

[@scottciampi2351]

No Worries at all, Amazon lost the first shipment caused the delay on the second and the. Delivered them both after canceling the first. And of course I am one of those guys who never watches the or reads all the directions first and just jumps in. Note to others, probably not the best way to do things. Super helpful video and I hope really appreciate the insight

[@alyritt6645]

This is such a great step by step video, this is what we used to repair our washing machine on Thanksgiving day. Thank you!

[@digitalcamproducer]

You’re welcome! Wow! You did the repair on Thanksgiving! So glad you were able to follow along with my video. I know it seems a bit intimidating to disassemble part of your dishwasher but when it’s laid out step by step it’s not so bad! Nice work! Thanks for watching!

[@alyritt6645]

@@digitalcamproducer Thank you and I am wondering if anyone else has had the same error code show up AFTER we replaced the drain pump (in our front loading washer) it read tE which says it's a thermistor but since we have no heating element we think it could be the control panel. WE are learning so much and it started with your video! Thanks again.

[@jrtwine]

You can get away without the spring stretching tool, if you have two relatively strong people applying pressure on the retaining ring at about the 7:00-8:00 positions, and 4:00-5:00 positions. That will allow you to reseat the ring rather easily with a screwdriver. Took us only two attempts to get it. Fantastic video, BTW!

[@digitalcamproducer]

Really glad you found my washer pump replacement tutorial helpful! Yes it’s possible 2 people can get the spring back on without the spring expansion tool! I’m glad you had someone to help with that! The spring tool really helps when working alone. Thanks for watching!

[@TippyPuddles]

I've taken it off and on many times myself with pliers. I now just leave it of and hung the wire on the back of the washer. Never have a problem, just check the gasket once in a while. Now fixes are quick. Change the lock super fast as well as saves time on future repairs.

[@nejolo9563]

@Ann Good to know. I was looking for another option like cutting off the spring and replacing it with an elastic connector or something more forgiving. Something that could fit in the groove and e strong enough to provide resistance. I’ll leave it off for now until I find a better option.

[@paul6x9]

This video is the one that worked for me. Someone else has a video where they go in from the bottom and that did not work! Also, regarding your parts organization, I fully recommend spending about $5 at Harbor Freight Tools on a parts organizer with a lid. I am clumsy and did kick my parts storage bin but the lid saved me from having a mess! Thank you for this video.

[@digitalcamproducer]

So glad my tutorial was helpful for your washer repair. Yeah quite a few people say to do this from the bottom. But I don’t have the space in my laundry room to tip the washer over. Plus I really don’t think the bolts on the pump can be reached from the opening underneath. Good job on your repair! And thanks for the tip on the parts organizer. I know I could’ve easily bumped my container of screws and everything would’ve been mixed up!

[@randydarby2340]

Keep making home repair videos like this ....KZbin needs this!

[@digitalcamproducer]

I plan on making more videos. The more things break at my house the more videos I can make! Haha! However I don’t really want things to break at my house! Thanks for watching!

[@michaelarenal1578]

Thank you so much for ur video! I fixed my washer following ur every step and I can’t say how much money I saved doing it myself. Again…thank u!

[@HiFilover168]

I just replaced the drain pump with the help of your video clip. I also ordered the pliers which make the job easier. I expect that the pump will need to replace again ( the old one last ten years). Thank you

[@digitalcamproducer]

You’re welcome! I’m really glad you were able to replace your drain pump using my video. Those pliers for the spring really comes in handy. And even though it was for one use it’s still worth it considering the cost if a repairman were to do the job. Thanks for watching!

[@samanthaleung9343]

Thank you so much for your detailed video. I purchased the spring extention tool and a pump. Your video gave me confidence to try changing out the pump and I was glad my LG ventless washer dryer combo had almost identical steps. I was able to also use the spring extention tool to help remove the spring instead of using a screwdriver to wedge it out. A tip that I was given years back from the guy that installed my Machine on how to easily slide and move the machine was to spray something like windex or soapy liquid on the floor under the machine and that helps glide it and it really works. Once again thank you and I am so happy to have a pump that is working again.

[@digitalcamproducer]

Thanks for the tip on how to move the washer! And the spring expansion tool can definitely be used to remove the spring. I just didn’t have it when I started. But as you saw I had to order one so I could finish the job. Thanks for watching!

[@akui88]

That spring tool is great, it made putting the spring back on a breeze. I knew about the sharp edges and was very careful, but somehow I found i cut my index finger near the end of the job. This video helped greatly!

[@paulamaxwell5886]

Thank you so much for this video! Your step by step directions gave me a clear understanding of each step and what I could expect. I used a sticky note for each set of screws I removed. I labeled each sticky note and taped the screws to each. Thank you again!

[@wesvasher]

Wow thank you! I just did this repair on my LG that's almost identical to this video and your attention to detail made the job so much easier. I'd just add a word of caution to anyone that I think the 3 bolts that hold down the pump assembly go into plastic and only need to be hand tightened, could easily strip the plastic threads if using a ratchet to re-assemble. I could be wrong.

[@DavidWaters59]

Great useful video. I just cleaned the pump and put it back in. I did get the toughest part done without the tool. I pulled the spring open with two small screwdrivers while my wife helped get it in the groove.

[@digitalcamproducer]

Excellent! Glad you got the spring back on without the expansion tool! That part really is the hardest step in this repair! Thanks for watching!

[@markempey836]

Incredible. It's increasingly rare to find someone who is good at what they do. Great video, good sound and camera, and all of your instructions were spot on. Spent $35 on the pump and Spring Tool. We probably saved on what would have been at least a $250 visit from the only reliable Appliance repair in Watertown NY area. Now to let friends and family know that I have the spring spreader tool they can use, so don't buy one!

[@digitalcamproducer]

Thanks for sharing your experience! I’m really glad my video is helping others with their washer pump replacement! You definitely saves money doing the repair yourself. Even better if you have friends that need to borrow the spring expansion tool! Great work! Thanks for watching!

[@davesstuff1599]

I had no problem tearing it down and replacing the pump. I bought the spring tool ahead of time and so glad I did. Excellent video.

[@digitalcamproducer]

So glad you were able to repair your washer using my tutorial! The spring tool really is necessary for that last step! Thanks for watching!

[@richardjones647]

Thanks a million! Just replaced my drain pump last night while following your video! That spring compression tool is a life saver, as is your vid!

[@GB-yx4ow]

Now this is how to make a great how to video. Excellent camera and lighting. Very detailed explanation of work being performed. You made my life a lot easier. Thankyou for your time and trouble.

[@digitalcamproducer]

You’re welcome! Really glad you enjoyed my video tutorial! I like to put as much detail as I can in it because partly it’s a video for me in the future if I ever have to do this repair again! Thanks for watching!

[@keithm9133]

I agree with everyone else - this is an excellent video, a perfect model for repair videos. In addition, the inclusion of the text of your instructions is the glitter on the icing on the cake! Thanks.

[@digitalcamproducer]

You’re welcome! I try to make my videos as detailed as possible partly so that if I ever had to refer back to it I would know step by step how I did the repair. So glad your got your washer fixed! Thanks for watching!

[@erikbrown8272]

Great video. Clear instructions. Worked with my son to show him that with youtube he doesn't need to pay a lot for repairs.

[@digitalcamproducer]

Nice! I’m glad you used this as a teaching moment! I try to make my videos as detailed as possible so that if I ever have to do this repair again I’ll have a complete set of instructions to do it. Thanks for watching!

[@lenskywalker578]

This NICE guy does a really good job - much better than some other "narcissist" with some "big intro" to his videos, that does NOT show nearly enough what to do, while simply fast-forwarding on things - there is NO comparison !! Anyway, there are seemingly too many steps for me to do it, myself, but I appreciate this video quite a bit !!

[@digitalcamproducer]

Yes! This does seem like an intimidating repair job! This is the first time I’ve replaced a washer pump and I had to shoot video of it at the same time! If you keep your parts and screws organized it’s not too bad. But I know taking apart a washer isn’t for everyone! But if you ever decide you want to tackle this repair you’ll know which video to come to! Thanks for watching!

[@TheAndorion]

Great video! For the “spring stretching” part at the end I used a scissor, put the two tips in each loop and pull apart. You’ll need someone to help you walk the ring in but it works! Thanks again!

[@digitalcamproducer]

You’re welcome! Glad you found an alternative solution to help with reinstalling the spring. Nice work repairing your washer! Thanks for watching!

[@MarkScholes-e4y]

Good video but there is an easier way of changing a drain pump on an LG washer. Just tilt the machine backwards to access the underside. You can remove the screws that hold the pump unit to the mounting plater from below. You only remove four screws and disconnect the electrical for the pump using this method.

[@jarso]

That is true. Just changed from the bottom side.

[@changxiangliu7718]

Thank you for sharing this as it saved me hundreds by not buying a new unit and following your instruction to fix it. Wondering if the pump breakdown is very common issue as I only owned this washer for just over 5 years.

[@digitalcamproducer]

I think the pump failure in these washers is pretty common. It’s probably one of the weaker parts of the washer and it gets used constantly. And if anything gets jammed in there like coins and other debris it can cause damage to the pump especially the impeller. So in 5 years time that’s a lot of wear and tear on the pump.

[@jackkelly4032]

I feel really manly right now because a. I put the gasket retainer back on with my bare hands twice! b. I had to do it a second time because the spring was in the wrong position because I didn't listen to instructions the first time! Thanks, very helpful video!

[@digitalcamproducer]

Oh man! Not once but twice with your bare hands! I tried but couldn’t put the spring back on without the spring expansion tool. Excellent work! Thanks for watching!

[@mattlong1281]

This video was perfect! Left no gaps and I was able to change the pump and save myself a few hundred dollars!

[@richlien5598]

Thanks for the detailed video. You saved me $$$ on repair. Only costed me $26 for the motor and about an hour of my time.

[@digitalcamproducer]

You’re welcome! Sounds like the washer repair was easy for you! I’m glad you were able to save money by doing the repair yourself! It seems intimidating at first but I made this video to help others with the same problem. Thanks for watching!

[@stanleycoffman611]

Do you know the part number for the washer pump? When I put my model into Amazon I get several options back.

[@clairebearcreations]

I watched so many videos and finally found this one half way through the repair! Thank you so much!

[@mrbikeman]

Just fixed my issue for 40 bucks! Thanks for the detailed video. High 5 brother!

[@digitalcamproducer]

You’re welcome! I’m really glad my washer repair video help you get your washer working again and save money doing it yourself! Thanks for watching!

[@dvbadzik]

Fantastic video, super detailed and I fixed my washer, saving big bucks compared to paying a repair service. I appreciate your recommendation on the spring expansion tool. It was a little tricky even with that tool, but I was able to get the retaining ring on properly on the third try. Without the tool, it likely would have been hours of frustration - Thank you so much!

[@digitalcamproducer]

You’re welcome! Really glad my washer repair video was helpful! That tool is a lifesaver! There was no way I was going to be able to get that spring back on without it. Maybe it’s a one use tool but if my washer pump goes out again I’ll have it ready! Thanks for watching!

[@DavidRowles-c3m]

This is a great help video. I was able replace my pump myself as a result of watching this video. My machine was a little different but all the steps fit my model as well. Thanks for this one.

[@chadmillslive]

Really appreciate this video! Would've been stuck with a big repair bill without it!

[@digitalcamproducer]

So glad you were able to fix your washer yourself! Yeah it would’ve been a hefty bill to call a repairman out to do the job! Nice work! Thanks for watching!

[@jeffpiatt3879]

Great video! Would be nice if LG just charged an extra $100 for the washer and used a drain pump with a stainless steel impellor that doesn't warp and break. I did three of these pumps on my last LG washer. The replacement pumps they sell last maybe two years, so bookmark this video, folks, you will doing this again and again and again.

[@digitalcamproducer]

Yeah that impeller is plastic and can break easily over time. That’s why I made this video as detailed as possible so that when I need to replace the pump again I can see exactly what I did to replace it. Thanks for watching!

[@TBr-ve8tv]

Great video. I felt like I could open an appliance repair business after I finished this project. Two things - I wish you would have said something about the spring expander at the beginning. I got to the end and wasted another day because I had to go out and buy one. Also, the rubber feet on the mounting pad in my machine were dry rotted. Didn't discover that until I had the thing apart. Fortunately, our local appliance parts shop had some left over grommets they gave me which solved the problem.

[@rifflekb]

Thank you! I used ur video and successfully changed my drain pump. My LG was slightly different. I don’t have space to tilt it up and I have a drawer pedestal, so this was the way to go. I reassembled rubber ring easily with the help of another pair of hands.

[@digitalcamproducer]

So glad you were able to replace the pump in your washer even with the slight differences. Saves quite a bit of money doing it yourself!

[@ericvansant5288]

Wow. Can’t thank you enough for your video. Well done. Your step-by-step made the repair SO SIMPLE. Really, I had already ordered a new washer ($800) rather than have a repair man come to the house. Ha now my wife thinks I’m a Superman lol.

[@digitalcamproducer]

You’re welcome! I’m really glad my video raised your handyman status! Yeah this repair seems intimidating at first but it’s actually not too difficult to do. Thanks for watching!

[@gregl.6243]

I was ready to start calling around to schedule a repair visit. I expected the removal of the front panel to be far worse. I was afraid I'd have to go in through the back, which I wasn't looking forward to. Your video showed it to be quite manageable. The two pump motors (Yep, two. Mine has two motors running to the housing - same part number.) are on order. Not sure which one is broken. I'll just swap them both and be good for a while. I was on the fence with the pliers, but I don't have the patience to go to war with this thing, so I ordered them.

[@digitalcamproducer]

Excellent! By now you’ve probably repaired your washer I hope! The spring expansion tool is really helpful! Not too expensive either for what might be a one use tool. Overall the price of the pump and tool is WAY less than calling a repairman! Thanks for watching!

[@dougmuller5931]

I echo everyone else's comments about the quality and the helpfulness of this video. The only bits of constructive criticism I have are: 1) It wasn't clear (to me) that you need to position the manual drain hose through the hole in the front panel before attaching the mounting bracket, and 2) It would be helpful to warn novices (like me) to be aware about when they are tightening screws into metal versus plastic. I wasn't paying attention and I think I overtightened the three screws that hold the drain pump bracket to the bottom of the washer. I was waiting for the screws to get real tight but apparently they are screwed into plastic and they never got very tight so I probably stripped all three of the holes. I hope the bracket will stay secure! Thanks for this great video and I hope my comments are helpful to others.

[@digitalcamproducer]

So glad my washer pump replacement tutorial was helpful! I’m glad you were able to do the repair yourself! For me it’s definitely a lot to think about when shooting this video and doing the repair for the first time on camera. I’m learning as I go! I tried to include as many details as possible but it’s easy to forget to mention a few things. But overall as I read the comments this video has helped a lot of people! Thanks for watching!

[@mpdonn317130]

Excellent video. Used the links for the part and tool and did the job on my LG washer. I probably wouldn’t have tried it if I didn’t see the video. Thanks again!

[@digitalcamproducer]

Excellent! I’m glad my tutorial gave you the confidence to try the repair yourself! I’m sure you have a great sense of accomplishment after doing this! Plus saving a bunch of money by not having to hire a repairman! Thanks for watching!