LG Washer Tower Laundry Center WKE100HVA DIY install - Part 1

[@craigfugit997]

What material is your thin floor slider “contraption” made of? Where did you get it? Thanks, Craig

[@DrBDIY]

It was a piece of plastic sheet we found, about 1/4" thick. It has been around for years, so sorry, unsure where it was obtained. You could try furniture slides under each corner. HD sells them, both with plastic bottoms (for carpets) and felt like bottoms for hard floors. I do use the plastic bottoms for hard floors also.

[@DrBDIY]

Fyi search for Appliance Slider with Pull Strap

[@GirlArmy21]

We just bought this set and installed it. My husband, son and I are not handy. Let’s just say, your video helped us a great deal.

[@DrBDIY]

Cool beans, way to go!

[@appliancerepairshorts]

Excellent installation . From the unboxing to the start up. Great job on the wiring.We use an air lift to slide them in. Excellent choice on LGs. They have the best front loaders. You typically get at least 7-10 years out of the washer before you have to replace the drain pump. Great job

[@DrBDIY]

Thanks for the comments !

[@itsdannykantu3043]

wow finally really honest review.. I have my lg washer over 12 years with no problems. I saw these in store.. I really like the idea and upgrading to these smart machines

[@danphilpott6302]

Very, very helpful. Your wife had a very good point about the wifi jargon that most people know nothing about. Always a good idea to listen to her and the kids! Wiser than you think. Awesome. Thank you so much!

[@DrBDIY]

So many people like this video. I guess they liked the LG tower.

[@KarmaCame]

Even tho I'm not installing myself this is good to see to make sure its done right.Thanks!

[@DrBDIY]

Great.

[@kryozzz3239]

@DrBDIY what other material needed to come out of the bottom? This part was kind of skipped over, you stated there was extra stuff that had to come out of the bottom but the instruction manual I have doesn’t state that. Other than that. This video provided everything I needed.

[@DrBDIY]

I recall that there was some Styrofoam on the bottom. Also, there were four plastic temporary leveling leg / pegs that we unscrewed.

[@kryozzz3239]

@@DrBDIY thank you so much! Very much so helpful!

[@DrBDIY]

@@kryozzz3239 sure thing.

[@bevbs2001]

I just got this model. My other LG had turbo wash. Does this model have turbo wash?

[@bevbs2001]

@@DrBDIY thanks but how do you do it because I don’t see the option on the control panel. Do you have to download it?

[@DrBDIY]

@@bevbs2001 My bad. Apparently, some models have different options. Mine has tub clean mode. But the manual shows Turbo mode which my model doesn't have. The manual covers models WKEX200H*A, where * means various options. From Home Depot reviews: * The colors, the 100 lacks the Turbo 360 feature, the100 has the rose gold trim, and a couple wash cycles are different between the two. Both are very capable machines. * Hello, WKEX200HBA has more drying and washing options.

[@bevbs2001]

@@DrBDIY thanks, yes that’s what mine has tub clean. I’m not complaining, I love the washer and dryer. I thought I was missing something or not understanding the control panel. Thanks for your help 😊

[@zest4life33304]

Please send the link for installation part 2. Thank you.

[@DrBDIY]

Hi. Please look in the video description.

[@zest4life33304]

Thank you for the quick response. I appreciate it. @@DrBDIY

[@Ludi-l5g]

Hi, what did you put underneath to make it slide so easily? I have the same problem with a narrow space.

[@DrBDIY]

Search for furniture glides / slides. The plastic bottoms are for carpet floors. The felt bottoms are for hardwood floors . I prefer plastic for both floor types. Safety first.

[@TimmyTime123]

what is the height of the dryer vent from the machine? I ordered mine online and I havent recived it yet. I gotta know before it comes.

[@DrBDIY]

Are you asking how high the dryer exhaust tube fixture is from the bottom. 74 3/8'' / 2 = about 37'" plus 4 inches = 41, +-. Or are you asking about the upper dryer ventilation grid area, which is 4" from the top, so 70 3/8" to top of ventilation.

[@aurosista2342]

Hi i have a question. My washer/dryer area is only 32.5 inches in depth. Do you think that is sufficient for this unit? It would leave about 2.125 inches of space behind for venting.

[@DrBDIY]

You need at least four inches on the back for vent tube clearance.

[@brokentissuebox]

ive been using this unit for 9 months now and never knew I can hold the remote function to allow me to use it on the phone! Thanks for mentioning that xD

[@DrBDIY]

You are welcome!

[@alternatingbitmusic]

At around 10 minutes in you mention SIDE venting is an option... Are you absolutely positive about that? Best Buy shopping cart says NO side venting. Maybe the chassis was designed before the entire unit was completed so those circles were an early option before unit completion?

[@DrBDIY]

Installing the Dryer Side Vent Kit The appliance is configured to vent to the rear. It can also vent to the side. WARNING • Use long-sleeved gloves and safety glasses. • Use a heavy metal vent. • Do not use plastic or thin foil ducts. • Clean old ducts before installing the appliance. NOTE • An adapter kit, part number 383EEL9001B, may be purchased from your LG retailer. This kit contains duct components necessary to change the appliance vent location. • Right-side venting is not available on gas models. • Bottom venting is not available on stacked or integrated stacked models.

[@alternatingbitmusic]

@@DrBDIYmuch appreciated! I'll order that kit and pray the installer team from Best Buy will do it for me - fingers crossed.

[@alternatingbitmusic]

@@DrBDIY Sorry, what tool is needed to knock out the metal circle covering the side hole?

[@DrBDIY]

@@alternatingbitmusic see this video from LG (different appliance but same idea). kzbin.info/www/bejne/epTIaniZa8t3rqM

[@alternatingbitmusic]

@@DrBDIY you are so helpful. Thank you!

[@dae91]

Thank you for this video can you link were you got all the accessories for the set up please, like the vent and the cord. pretty much all the accessories.

[@DrBDIY]

I updated the description above.

[@LeticiaStanley]

Thank you! Sorry I missed that in the description. Great video, very helpful. Thx again for the info

[@DrBDIY]

Glad it was helpful!

[@Itsme-vo4fx]

Can I use both washer and dryer without WiFi (we don’t have WiFi at the location where we are doing the installation) ?

[@DrBDIY]

You can use it without wifi. Wifi is for app control and notifications, local and remote. I have not seen devices updated over wifi.

[@appleSUX1]

Question: When you use the STEAM DRYER feature, do you actually see any steam inside the dryer (steam comes from that chrome piece inside the back area) of the dryer? (ours is an electric dryer version, but I believe the gas version also has steam too with that chrome piece where steam comes out)? Anyway, we have the same unit, but when we run the Steam Dryer, we don't see ANY steam inside the dryer, but clearly can hear it making steam and running, just can't see any steam inside or see anything coming out of that hole on that chrome piece where steam comes out). I would appreciate it if you could let me know.

[@DrBDIY]

The model WKE100HVA show in the video does not have steam drying.

[@DrBDIY]

Note: WKE100HWE has less drying and washing options compared to WKEX200HWA. For example, the drum light sub-button is not on the WKE100HWE. Steam drying is also not in WKE100HWE.

[@appleSUX1]

thank you so much. sorry i didn't know that..@@DrBDIY

[@edwinvillamizar04]

The washing machine incorporates water heater?. I ask because I don't have hot water available.

[@DrBDIY]

The washer does not heat water.

[@edwinvillamizar04]

@@DrBDIY Confirmed with LG technical support and by own tests, that the washing machine has a built-in heating system. That is, if you do not have hot water inlet, this system can replace it, so there is no need for hot water supply. Verified in several tests, in addition all washing machines since 2016 include a water heating System.

[@edwinvillamizar04]

Confirmed with LG technical support and by own tests, that the washing machine has a built-in heating system. That is, if you do not have hot water inlet, this system can replace it, so there is no need for hot water supply. Verified in several tests, in addition all washing machines since 2016 include a water heating system

[@Tyler_deJong]

Please help. My old stackable had a single 3 prong plug to run everything, washer and dryer. This LG stackable has two plugs, a 3 prong 240V and a standard 120V. Do both need to be plugged in or does the entire unit run off the 240V? Why is there an extra 120V plug?

[@DrBDIY]

You can use a 220V three or four prong plug for the dryer. Buy the one that matches your wall outlet. The instructions show you how to wire both. You also use a standard 120v for the washer. If I recall, that wire is included. So two wall outlets are needed.

[@ezequielavina1071]

Does this unit use less water than normal? I’ve been washing with it for the last couple of days and I’m not used to seeing such a low water level from a washer

[@DrBDIY]

Some LG units (this one) have a smart sensor that calculates the appropriate amount of water. It appears to work very well for us.

[@juancarlossandoval5628]

hi its me again,, how do we activate the drum light on this model ? thank you

[@DrBDIY]

Drum light activation is on the 200 model, not the 100.

[@technutz]

Thumbs up for the puppies alone! the rest is very good also

[@DrBDIY]

Thank you very much!

[@949surferdude]

I bought the gas dryer one. Does it use a regular Type B power plug? If so, do I need to do change the wire power cords?

[@DrBDIY]

I am not sure. What is the model number? Home Depot has the manuals online.

[@annemariemcgee2002]

Excellent summary of pros and cons. Very down to earth comments.

[@DrBDIY]

Thanks for the kind words !

[@edwinvillamizar04]

Excellent video, mine arrived yesterday, only experts come to install it. Greetings from Bogota.

[@DrBDIY]

Greetings from Texas. Enjoy!

[@JonathanPang]

I hope they eventually make a ventless version of this. I just ordered one but will probably need to Macgyver the vent out about 6 or 7 ft

[@DrBDIY]

We remodeled an area for the unit. We ran a hole up the wall across the ceiling and into the garage, about 7 feet total. We added a right turn in the garage ceiling to go out an exterior wall 2 feet away. It wasn't too big of a project and we didn't hit any unknown pipes or wires.

[@Steve42098]

@@DrBDIY you might want to consider a vent boost fan. I had a long ventilation run and the boost fan took about 15 min off of my drying times after I got it hooked up

[@mariag8061]

Great video! What kind of pads do you put on the floor so that you can slide them out easier, if needed?

[@DrBDIY]

www.homedepot.com/s/furniture%20sliders?NCNI-5 You the plastic side sliders for carpets. Use the soft side sliders for hard floors. Both have a foam piece on one side that faces up towards the device you are sliding. I don't leave the sliders under the unit when the washer/dryer are in use. The washer/dryer may rock out of place when spinning high! I prefer to remove them and spray a blue window cleaner to get it out of its usage place. Then I would put the sliders on if I was moving it far.

[@wallyj2000]

Hi, thank you so much for sharing and a detailed video now that you've had it for quite a while. Do you still recommend it has there been any reliability issues? Thanks.

[@DrBDIY]

Still working like new. No issues.

[@wallyj2000]

@@DrBDIY OK, thanks for your quick reply use them in good health

[@toddw.7457]

With the hard venting coming down so close to the exhaust of the dryer, you have to use a long length of soft venting to make the final connection if you have to do it before pushing the machine back. If the hard venting from the ceiling terminated above the dryer, you can install the soft venting to the dryer, push the machine back, then get a ladder and make the final connection to the hard venting overhead. This allows the soft venting to be straighter and not loop down.

[@DrBDIY]

Good points.

[@juancarlossandoval5628]

Thank you for this very informative video,, quick question,, have you tried controlling the dryer away from home,, let say you forgot to turn it off and turn it off using the app?

[@DrBDIY]

You can use the app to turn it off. Of course, when it is off, you cannot connect again with the app until you turn it on manually.

[@robertlozeau4352]

I did use your video today for installing my new unit similar to yours . Thanks a lot for helping me . Robert , Bromont , Quebec .

[@DrBDIY]

Great to hear!

[@JessacaRedd]

I can’t wait until mine arrives. Thank you for the video

[@lindam9024]

i watched the your video and disappointed that you didn't show how the unit was actually pushed into the narrow space with out kinking the dryer vent hose. How do you prevent a problem with this or even know if you have a problem after its pushed into place? Thanks

[@DrBDIY]

It was difficult to video behind the unit. Using the firm dryer vent hose makes it easier not to kink. The cheaper more flexible vent hoses king more.

[@missythomas7598]

I got mine delivered on Saturday; after buying it May 31. Thanks for the video. I'm also having an issue connecting it to WiFi.

[@DrBDIY]

Try connecting to the washer wifi then the dryer, or vice versa. I think we connected to dryer and it found both devices. Not sure why.

[@Thebarrioboy2009gma]

Does this washer and dryer combo use 240 outlet?

[@DrBDIY]

Yes.

[@barbarachappuis5262]

I just bought this unit and so far, so good. I also own the full-size LG set that I've had for 6 years. My question is how do you turn on the drum light in the washer while running? For the life of me, I can't figure it out. My larger LG washer allows me to turn the drum light on while washing, but perhaps this unit doesn't have this feature? Thanks

[@DrBDIY]

Drum Light The drum is equipped with a white LED light that illuminates when the washer is turned on. This light automatically turns off when the door is closed, and the cycle starts. Press and hold the Pre-wash button for 3 seconds during the cycle to turn on the drum light. The drum light will turn off automatically after 4 minutes.

[@angeliquekaber4520]

Can this vent out from the side with knockouts there

[@DrBDIY]

Yes, I think you need a kit too. See page 19 of these instructions: images.thdstatic.com/catalog/pdfImages/4a/4a69f141-b22e-455b-9ecd-3de8738b4449.pdf

[@angeliquekaber4520]

@@DrBDIY thank you so much.

[@tonycelaya5846]

How come it shuts down when the dryer is turned on

[@DrBDIY]

The washer and dryer run simultaneously.

[@Cummins402]

Anyone have the issue where the chime stops working on the washer but still works on the dryer (when you press buttons)? This happened to mine today. I may have accidentally muted it? But idk how or why or how to correct it. Had this unit almost 2 years.

[@DrBDIY]

The dryer plays a melody when the dry cycle is finished. The buttons make a sound each time a button is pressed. Use this button to turn the melody and button tones on or off. • To turn the function on/off, press and hold the Reduce Static button for 3 seconds. The washer plays a melody when the wash cycle is finished. The buttons make a sound each time a button is pressed. Use this button to turn the melody and button tones on or off. • To turn the function on/off, press and hold the Extra Rinse button for 3 seconds

[@carolinenunez991]

Where is the SSID found? Or located

[@DrBDIY]

The SSID is from your hone network wifi. It is the name of the wifi you connect your devices to.

[@b-rare]

blue glass cleaner sprayed on the floor to slide it was a good key from the video for me thank you guys

[@DrBDIY]

Works well, glad it helped.

[@DrBDIY]

Also: www.homedepot.com/s/plastic%20sliders?NCNI-5 for furniture slides.

[@ignaciosegura4424]

Hello I have a doubt with vent hose, I have the same space as you and Im afraid that when I slide back the unit, the hose maybe obstructed. It could be any problem with that?

[@DrBDIY]

Easy for me to address that concern. On all of my refrigerator, washer, dryer and freezer installs, I attach my phone to a selfie stick. Then I take a video of the back, sides, etc. It is easy to see what is going on. Our install of the tower went well, no kinks in the hoses, nothing falling off. Safety first.

[@gralbr]

What about the water line for the steam feature on the dryer?

[@DrBDIY]

Our model did not offer steam. See description above for the steam model number.

[@gralbr]

@@DrBDIY It says right in the video that there is a steam connection to the dryer.????

[@DrBDIY]

Yes, I thought there was a connection while recording. Quickly we realized there isn't a steam connection, and it was the model in the description above that has steam. Oh well. "Note: WKE100HWE has less drying and washing options compared to WKEX200HWA. For example, the drum light sub-button is not on the WKE100HWE. Steam drying is also in WKEX200HWA."

[@bui893]

Great video! Any idea what the depth ended up being with the hot/cold hoses installed?

[@DrBDIY]

Dimensions (Width X Height X Depth) 27'' X 74 3/8'' X 30 3/8''-depth (70 cm X 189 cm X 77 cm) Maximum Depth with Door Open 55'' (139.6 cm) In the video at about 5 minutes where the thumb is on the tape measure, that is about 30". Which allows room for the dryer vent also. Our area opening was about 36" deep. We had plenty of room left over. Also, consider where your plug is coming out of the wall as that may need two inches if directly behind the unit.

[@bui893]

@@DrBDIY thx for the quick detailed response. Thinking hard on this unit. Looks great. Working with about 33 inches for depth in a side closet. Hoping to still be able to close the door after installing

[@jasonburkholder8533]

@@bui893 were you able to install it with 33 inches? Currently trying to figure out if I can get it to work in a 32 inch deep space

[@bui893]

@Jason Burkholder it would have forced me to remove the door. I ended up with the 3.8 cu ge spacemaker which was just slightly smaller and that ended up fitting perfectly with the door still on. Hope that helps and good luck!

[@jasonburkholder8533]

@@bui893 bummer! thanks so much for the quick reply. Do you like the spacemaker?

[@fearlessvoicee]

Question for you did you need a Y connector for this washer? For the steam?

[@DrBDIY]

Hi, please see the description above: Note: WKE100HWE has less drying and washing options compared to WKEX200HWA. For example, the drum light sub-button is not on the WKE100HWE. Steam drying is also not in WKE100HWE.

[@fearlessvoicee]

@@DrBDIY OK cause it looked like on the website I did have the steam? Thanks

[@DrBDIY]

@Daniel Kinley Fearlessvoicee yes. We thought it had steam and found out during install that it was other model.

[@folsomatgranitebay5215]

Is the units true depth 30” from front of door to back plumbing? If I want to enclose unit in a cabinet, how deep would cabinet need to be to allow plumbing/ducting/receptacle plug?

[@DrBDIY]

From the font to back plus room for the ducting, 36 inches (see description above). You may also think about space needed to open doors and to what angle do you want to open them? I am not sure if the front will be open or you will enclose the unit.

[@geedubb-q1u]

You didn’t need the cold water T for the steam drying on back of the dryer?

[@DrBDIY]

I thought my model had steam drying but it didn't. A very similar model has the steam. I am not sure if they are the same model number.

[@jaypaek1]

Thanks for your video. Do I need to buy other supplies like horses and dryer vent too?

[@DrBDIY]

It is recommended to replace the hot and cold water inlet hoses, plus a dryer exhaust tube to connect to your hot air output. Some versions of this unit have steam for the dryer, which means you need another water inlet for the dryer.

[@carefuld9779]

Thank you so much for making this video..you really helped a lot people with their decision in purchasing this unit. Cheers!!

[@DrBDIY]

Thanks for the kind remarks!

[@joshp2424]

Yes make sure to take those shipping bolts out. Next time use windex in the path to slide it eazer and it drys fast with no need for those sliders

[@DrBDIY]

Yes

[@hismercedess550]

Hi do I have to add water line to dryer??

[@DrBDIY]

@@hismercedess550 Hi, see the description above: Note: WKE100HWE has less drying and washing options compared to WKEX200HWA. For example, the drum light sub-button is not on the WKE100HWE. Steam drying is also not in WKE100HWE. Our model DID NOT have steam drying. We were confused about that optioun.

[@MJA74a]

awesome video. My dropped the wifi connection after a month of no issues and now refuses to stay connected or even connect. it’s like it no longer likes my network for some reason. Did the reset and all the other basic things like unplug machines press hold start and nothing. wife not happy.

[@DrBDIY]

On WIFI issues, there are usually two possibilities - the appliance or your network. It is possible the appliance is going bad in which case call LG. If it is your home network, here are some things to try (which you may know, but others don't know). 1. Turn WIFI hotspot on your phone and connect washer to your phone. Is it stable? If so, indicates problem with your home network. 2. Install a WIFI scan app on your phone. Look for your WIFI SSID and look at the strength. Is the signal strength stable (not dropping to 0)? 3. Use the same app and determine if another WIFI router is overlapping your channels. For example, a new neighbor moves in and their router uses same channels as your router. This can cause drops / retries / performance issues. Move your WIFI SSIDs to a new channel. 4. I guess no other devices are in your home are having problems as you didn't mention it. Its always okay to reboot your router. 5. Finally, try connecting the WIFI from the dryer vs washer, or vice versa. Hope it helps. We have installed an LG pair in our home and in another home. No issues with WIFI.

[@kirkbarnes1095]

Does this require both a 220v and 1v outlet?

[@DrBDIY]

220 for dryers, 120 for washer. Two plugs.

[@pixelking_871]

Finally a regular review 😁

[@imhawkeye]

This was really helpful. What were the pads you used under the machine while you did the setup/install? Did that come with the unit or something separate that you can post a link to? Thank you.

[@DrBDIY]

Check out: www.homedepot.com/b/Storage-Organization-Moving-Supplies-Packing-Supplies-Furniture-Sliders/N-5yc1vZ2fkojw8?NCNI-5&searchRedirect=furniture%2520sliders&semanticToken=d00r20r01122000000_2022031914104474249411020453_us-east4-ncc8%20d00r20r01122000000%20%3E%20%20rid%3A%7Bacce6830d1cb5f6b6d1a5642485bcd81%7D%3Arid%20st%3A%7Bfurniture%20sliders%7D%3Ast%20ct%3A%7Bfurniture%20slider%7D%3Act%20tgr%3A%7BNo%20stage%20info%7D%20nr%3A%7Bfurniture%20slider%7D%3Anr%20qu%3A%7Bfurniture%20slider%7D%3Aqu Usually, the cloth sliders are for hard floors and the plastic sliders are for carpet. I have used plastic on both as in the case of this washer dryer install.

[@aliciawilson7113]

We were told by the installation crew that we couldn't put anything under the machine cause it wouldn't be level

[@edwinvillamizar04]

Confirmed with LG technical support and by own tests, that the washing machine has a built-in heating system. That is, if you do not have hot water inlet, this system can replace it, so there is no need for hot water supply. Verified in several tests, in addition all washing machines since 2016 include a water heating System.

[@DrBDIY]

Wow. I did not know that existed in the LG washers. Thanks for the tip.

[@Hunterbenx]

Hmm so that’s why some washers have the Extra hot water feature

[@FernandoLopez-bq3zf]

Hello, thanks for the great video. Question: Do I need to reactivate remote start after powering up the appliance?

[@DrBDIY]

Once remote start is enabled, it can only be turned on / off from the app. The manual says "Start a cycle .... " If you open the door, the remote start is canceled. If the power is turned off and then on, remote start is reset.

[@nicolem2941]

How long are the the dryer vent hose is and the power source cords are? As you custom built the area for yours, mine space is the traditional space Thank you.

[@DrBDIY]

My hoses were 4' long. You can get 5' hoses also. The dryer tube can stretch to 4 feet, maybe longer. I didn't try.

[@sharonmunoz1548]

By any chance did you notice certain sound like a very high beep durning the wash process ?

[@DrBDIY]

Typed it wrong. I don't hear a high beep.

[@MM-sj7fs]

Nice setup! But you hv to hold and fill the detergent if you don’t want to use measuring cup.

[@DrBDIY]

Thanks for the tip!

[@elizabethduecker1479]

Do you by any chance remember how far up from the floor the exhaust hole is on the back of the dryer. I’m having my Lg tower delivered next week. I’m having a dryer box installed in the wall this week and I would like them to line up so the unit can be as close to the wall as possible. Thanks for any info you can provide

[@DrBDIY]

From the floor to the center of the dryer vent is 41 inches.

[@elizabethduecker1479]

Thank you SO much!

[@nabelar82]

No gas line in those machines?

[@DrBDIY]

Electric only in this model.

[@nabelar82]

@@DrBDIY I'm having hard time installing the gas model due to difference between valve and dryer connection

[@DrBDIY]

@@nabelar82 I haven't used a gas dryer. FYI, kzbin.info/www/bejne/nWGVhIxjm8mfqdU is where I changed natural gas connection to Weber grill connection. Maybe it will give you some insight enough to ask guys as Home Depot. No sparks! Mostly brass. Safety first.

[@Lovely121586]

I just received mine yesterday and it was really noisy when it was spinning and shaking the whole machine. This is normal? This is my first LG before I have Samsung and I never had that issue.

[@DrBDIY]

Shaking is not normal unless you have one large item of clothing and it is weighted to one side ... Did you level the unit in both front to back and side to side directions using the leveling wrench? Page 24 of instructions. Is the floor level? If not, the feet need to be leveled differently. Also, if the floor is slippery, you are supposed add the non-skid pads. There are other reasons it could shake, such as the washer weights are loose, but that is unlikely.

[@DrBDIY]

Also, did you remove the installation bolts used for shipping?

[@rpope5]

Make sure the delivery guys remove all that white foam from up on at the bottom of the washer mine was making noise 2 delivery guys have left foam up under the bottom of the washer

[@stephanyereyes9128]

Mines are super loud when it spins. Idk what to do about this

[@DrBDIY]

That is not good. Two ideas come to mind. Did you remove the temporary caps on the feet? Also, did you level the washer according to the instructions? Failure to do both may cause noise.

[@dannysosa7537]

Do I need to connect the other 120v or just the 4 wire

[@DrBDIY]

On the model WKE100HVA , just the 4 wire.

[@DacAL_8]

@@DrBDIY We bought the same model and will be delivered on Monday. My condo only has combo washer dryer 4 prong plug. So just to make sure, this model only has single connection for both washer and dryer if using the 4 prong plug? I don’t need the 120v plug for the washer? Thank you!

[@DrBDIY]

​​@@DacAL_8 same model, no steam dry, one power plug.

[@DacAL_8]

@@DrBDIY Thank you very much!

[@DacAL_8]

@ so nothing is connected to your 120v outlet? I’m chatting with home depot and they are saying it requires 240V plug for dryer (electric) and 120V for washer. Was there a certain connection on the 240v plug to get power access for the 120v washer so it only requires the single 4 prong plug to power both?

[@LeticiaStanley]

What is the height of the wash tower?

[@DrBDIY]

Hi, up in the description: Dimensions (Width X Height X Depth): 27'' X 74 3/8'' X 30 3/8''-depth 70 cm X 189 cm X 77 cm

[@bullseye2191]

Just bought one yesterday that’s why watching KZbin to get more info. Thanks for the info.

[@DrBDIY]

Cool, glad it helped.

[@pwrmac7600]

I am contemplating buying this unit to make more room in my small laundry room. How are you feeling about it now that you have had it a little while?

[@DrBDIY]

It is a nice unit and saves space. I have another LG unit that is side by side and larger (WM4200HWA.ABWEEUS, DLEX4200W.ABWEEUS). Both operate somewhat similar.

[@bluesteelworx]

I didn't see the steam hose hook up

[@DrBDIY]

WKE100HWE has less drying and washing options compared to WKEX200HWA. For example, the drum light sub-button is not on the WKE100HWE. Steam drying is also not in WKE100HWE.

[@senecadaze]

did you check level of floor in back where it slides too

[@DrBDIY]

Yes, the back right was 1/4" off, so we adjusted that leg.

[@waltercobra1566]

I meant to leave a statement on your video for "Changing a Bearing out" but forgot. My statement is, where do you get the patience to do what you just did? One time would have me beating the washer with a bat, but 4 times???? WOW! Impressed

[@DrBDIY]

COVID lockdown had some extra time. !

[@Nannerchan]

I bought one yesterday but it hasn’t been delivered yet. I’m five feet tall. None of the other washer dryer combos are made for me.

[@DrBDIY]

Should be a good height for you.

[@jordanjae]

Hey can you do me a quick favor, I was told if you hold the wrinkle care button for 3 seconds the drum light can come on during the cycle. Is this true?

[@DrBDIY]

On my non tower system, I have "Drum Light" under the wrinkle care button. It appears in the same font as the "Wi-fi" writing. If I hole wrinkle care for 3 seconds, the light turns on. On my tower, there is no drum light smaller font shown, but Signal is. It appears there may be variations in these tower models, some with light, or not, not really sure. But the model WKE100HWE reviewed doesn't have a light. From the Home Depot site: "WKE100HWE has less drying and washing options compared to WKEX200HWA"

[@susanupton2642]

just installed today. cannot get washer to stay on...turns on but then shuts off without adding any water or spinning. help!

[@DrBDIY]

Do you have water hoses crossed or not turned on?

[@abrahamhernandez5719]

This might be an stupid question but... is it much heavier than a standard front load washer?

[@DrBDIY]

Not a stupid question. I had a stand alone LG electric washer WM4200H_A 201.5 lbs. and dryer 125.3 lbs. The tower unit WKE100H*A / WKG101H*A weighs 310.6 lbs.

[@TacticalStrudel]

Now that you've had it for a few months do you like it, does it wash and dry well? Also when you do a load of bedding does the dryer roll it into a ball that never dries like my current dryer does?

[@DrBDIY]

It works very well. The pre-programmed wash types are very convenient such as Bedding. Balled up bedding is usually because the dryer is packed or it was put in there balled up, regardless of the dryer model. Elastic mattress pads also have to be adjusted after drying a bit.

[@robertlehnhoff9100]

Quick question. How much does it cost to get that electrical outlet installed. My house doesn't have one of those. Thanks.

[@DrBDIY]

The parts in $USD are under $20. The wire will cost more depending on if you are running to the breaker box (dryer) and/or an existing junction box (washer). I had a bid for $300 just for one 100V outlet run to another junction box.

[@robertlehnhoff9100]

@@DrBDIY Thank you so much.

[@jeffbrewster4363]

How much space do I need to the left of the machine to fully open the washer door? I have a wall to the left.

[@DrBDIY]

27 inches wide, so to open all the way sideways, 27 plus inch

[@alexb7336]

So question: Can your phone text you when your load is done for washer or dryer?

[@robsea8088]

It does, if you allowed it.

[@DrBDIY]

Push Alerts - When the cycle is complete, the appliance has problems, or you need to clean the machine, you will receive an alert text. You can see the history of messages in the app. The app also allows you to start/stop the cycle or check the status.

[@andoyskies9855]

i noticed the cold water outlet connection to the washer is slightly loose. zoom in you notice water droplet dripping. check it your back is rusting of may cause short circuit the electric.

[@DrBDIY]

In the video? We moved it again after painting the walls. Everything in our install is tight. Thanks.

[@markoi.8948]

Why is it washing wit so little water ? i got the machine today and still trying to figure out how to use it lol

[@DrBDIY]

The washer has a 'sensing' feature that determines how much water to use based on weight, and your settings.

[@markoi.8948]

@@DrBDIY Thank you , i see the stuff is wet but i don’t see water like in old washers hahah. Thanks again

[@DrBDIY]

@@markoi.8948 Make sure you do see some water. It doesn't fill up so you can see water on the front glass though. Just be sure, also make sure you didn't cross the hot and cold water inlets on the back.

[@markoi.8948]

@@DrBDIY there is water in it for sure I can see it wet inside the machine and stuff I guess I’m just use to my old one that fills to the top. It does wash the clothes really nice though. Thank you

[@josemena7644]

Awesome details!!!! Thank You so much. Sincerely 🙏🏼

[@DrBDIY]

Glad it was helpful!

[@tuck28]

Thanks for the video! Where did you get that plastic skid to slide the LG washer around?

[@DrBDIY]

They sell them many places. Search homedepot.com for furniture sliders. Plastic bottom for carpets, fuzzy bottom for hard floors. However, I found that plastic sliders work on tile also.

[@tuck28]

@@DrBDIY Thanks for the reply! We're looking into the unit but would have to fit it through a 27.5" wide laundry room door frame (our other doors are wider). Do you think we would be able to with the slider trick or is that too narrow based on your experience?

[@DrBDIY]

@@tuck28 Unsure. The dimensions are: (Width X Height X Depth) 27'' X 74 3/8'' X 30 3/8'' (70 cm X 189 cm X 77 cm). This means you have 1/2" of play. The skids need to not overlap 27" either, which is doable. If you are going straight in with no turns in the door, it may work.

[@wiragarcia1816]

Thanks for the video. Thinking of purchasing one of these units. Your video will make my purchase that much easier

[@DrBDIY]

You are welcome!

[@rodsills745]

Does anyone know the height from the floor to the center of the dryer vent?

[@DrBDIY]

Electric unit (to center of vent:) 41.5" High (from floor) 14.0" From Left side (facing front) There is more detail on the Home Depot site : www.homedepot.com/p/LG-Electronics-27-in-Graphite-Steel-WashTower-Laundry-Center-with-4-5-cu-ft-Front-Load-Washer-and-7-4-cu-ft-Electric-Dryer-WKE100HVA/316391992

[@jebataslan9486]

Hi.... Can u share.. The washer.. How many in KG?

[@DrBDIY]

Here are the specs including the weight in KG. Min. / Max. Water Pressure 20 - 120 psi (138 - 827 kPa) Dimensions (Width X Height X Depth) 27'' X 74 3/8'' X 30 3/8'' (70 cm X 189 cm X 77 cm) Maximum Depth with Door Open 55'' (139.6 cm) Net Weight 320 lb (145 kg) Capacity (Washer/Dryer) 4.5 cu.ft. / 7.4 cu.ft. Max. Spin Speed (Washer) 1300 RPM Gas Requirements NG: 4 - 10.5-inch (10.2 - 26.7 cm) WC LP: 8 - 13-inch (20.4 - 33.1 cm) WC Operating Temperature Range 41-95 ℉ (5-35 ℃)

[@juan6810]

Did u install waterline to the dryer for the stem function

[@DrBDIY]

My model doesn't have steam in the dryer. For those that have steam, you will need a splitter on the cold water line so that water can go to the washer and dryer.

[@juan6810]

@@DrBDIY I thought all these LG towers had the steam function you even commentated on it

[@DrBDIY]

@@juan6810 I thought they did too until we looked and no water inlet on the dryer.

[@juan6810]

@@DrBDIY That sucks, we are thinking of getting this LG the laundry room remodel, just gotta figure out how to move the dryer vent 6ft. across the wall Thanks for the video

[@DrBDIY]

I have Model# WKE100HVA with no dryer steam. See: www.homedepot.com/p/LG-Electronics-27-in-Graphite-Steel-WashTower-Laundry-Center-with-4-5-cu-ft-Front-Load-Washer-and-7-4-cu-ft-Electric-Dryer-WKE100HVA/316391992?#overlay A similar Model# WKEX200HBA shows it has dryer steam. See: www.homedepot.com/p/LG-Electronics-27-in-Black-Steel-WashTower-Laundry-Center-with-4-5-cu-ft-Front-Load-Washer-and-7-4-cu-ft-Electric-Dryer-WKEX200HBA/314744262 Good luck.

[@AA-tt5ok]

Forgot to connect the dryer hose drain

[@DrBDIY]

Yes, it seems that way. But there are two models of this washer dryer tower. One model has dryer steam, the other doesn't. And this is the other model. No steam in dryer and no dryer hose drain.

[@AA-tt5ok]

@DrBDIY is it heat pump? What model is this? Thanks

[@DrBDIY]

WKE100HVA

[@GirlArmy21]

Does it have to be on wifi? I want something less complicated.

[@DrBDIY]

You don't have to use the wifi function.

[@StanleyJ305]

Just purchased this unit model WKEX200HBA with steam. I hear people saying they have issues with this machine. Are you having any issues? There was someone saying there’s a puddle of water left in the washer once the load is complete. Other are saying the machine is noisy. And others say they do not last long. What are the pros and cons of this machine to you?

[@DrBDIY]

We haven't had any problems. No left-over water, unusual noise, or problems. Pros: works well, nice design, fits tight spaces.

[@StanleyJ305]

@@DrBDIY how long have you had this machine? Are the wash times really ridiculous I seen someone said a quick wash was over an hour long.

[@DrBDIY]

Received the unit in May 2021. The wash is smart in the sense if you pack it with laundry and do a quick wash, it measures the weight and adjusts the time. Otherwise, if you pack the washer and try to wash in 10 minutes, the clothes are not really cleaning. Others might have problems, not sure. The manual online explains the wash / dry cycles in detail.

[@StanleyJ305]

@@DrBDIY I take delivery of my machine on Tuesday 12/28 by Best Buy as well as installation. I also purchased an additional 5 years warranty on the machine.

[@Staciem]

Is it difficult to reroute the dryer vent to the side? What do you need to do so?

[@DrBDIY]

I didn't do the side vent, but after reading the instructions, it looks easy. Just be careful around sharp edges. Basically, remove the existing vent, attach it inside to the base, poke out the hole on the side, pre-assemble elbow and extension, insert and attach/tape. From the manual: An adapter kit, part number 383EEL9001B.

[@Staciem]

@@DrBDIY thank you so much!

[@elizabethfox7051]

@@DrBDIY any idea how much depth i need total for the standard back venting vs how much depth for the side venting? I am considering this unit but only have about 32.5” from wall to the inside of the door to the laundry closet

[@DrBDIY]

​@@elizabethfox7051 The specs show: Dimensions (Width X Height X Depth) 27'' X 74 3/8'' X 30 3/8''-depth (70 cm X 189 cm X 77 cm) Maximum Depth with Door Open 55'' (139.6 cm) So in the video at about 5 minutes where the thumb is on the tape measure, that is about 30". Which allows room for the dryer vent also. Our area opening was about 36" deep. We had plenty of room left over. Also, consider where your plug is coming out of the wall as that may need two inches if directly behind the unit.

[@gregschwarz2224]

@@DrBDIY so you can take a panel off of the back to install the side vent? The single units you need to completely disassemble the dryer. It didn't look easy

[@jamesales5187]

I have a closet depth of 32.75 inches. Will this fit?

[@DrBDIY]

The specs show: Dimensions (Width X Height X Depth) 27'' X 74 3/8'' X 30 3/8''-depth (70 cm X 189 cm X 77 cm) Maximum Depth with Door Open 55'' (139.6 cm) So in the video at about 5 minutes where the thumb is on the tape measure, that is about 30". Which allows room for the dryer vent also. Out opening was about 36" deep. We had plenty of room left over. Also, consider where your plug is coming out of the wall as that may need two inches if directly behind the unit.

[@jamesales5187]

Thanks you. I’m more concerned about the dryer vent behind the unit. If 2 inches is enough then in good. I was worried that I needed more than 2

[@MatthewOliphant]

18:14 Here I was pressing the Wifi icon ... thanks for your video.

[@factsoflifepodcast]

Our new house doesn’t have a Gas line, unfortunately it looks like the builder bought a Gas wash tower. Is there a work around this? Or I will have to get an electric dryer 🤦🏾‍♂️

[@DrBDIY]

I didn't know they made a gas version until you mentioned it and I looked it up. The workaround would be to run a gas line and vent - not an easy DIY job. I would ask the builder to replace the unit with an electric version. Most builders would do that.

[@factsoflifepodcast]

@@DrBDIY True, thanks!

[@dusktilldawn888]

Curious your thoughts after 2 years of use. With large loads what is the fastest full wash cycle with low soil loads, 30 ,45 minutes? With the same large loads what is the average drying time? For drying 40, 60, 80 minutes on large loads? Reliability? Overall are you happy with your purchase? We are using for a more commercial space so large loads of towels and want to figure out dry times.

[@DrBDIY]

We really haven't paid attention to timing. Maybe I should. There is a 15 min quick wash which can be adjusted by altering the dirty level. I use the 60 minute times dry on low heat and it usually dries everything just fine, I don't use that for towels, I just do the heat dry. We may use the unit seven times per week (lots of laundry). So far very reliable and no maintenance issues.

[@alinaabid2704]

Where does the drain hose for the dryer go?

[@DrBDIY]

There is only one drain hose for the double unit and that drains into your household outlet.

[@alinaabid2704]

@@DrBDIY Is there a way I can send you pictures of the drain hose of my unit? I have the same twin- tower but have a separate hose for the dryer.

[@DrBDIY]

Please post a URL link here to your product online so I can look at the manual. I have two types of LG steam dryers and neither have a drain hose...

[@tuck28]

Depending on your country/region, you might have the heat pump dryer version of the LG washtower. Here's a video that shows how the dryer drain hose can be setup: kzbin.info/www/bejne/bYW1pJume81mnsU

[@alinaabid2704]

@@tuck28 Thank you. this helps

[@starholistic]

Great video. Where do I put Downy Unstoppables? Can I put in the fabric softener compartment?

[@DrBDIY]

We don't use them. But I think you have to throw these in the main tub, not the compartments. downy.com/en-us/fabric-softener-tips/how-to-use-downy/how-to-use-scent-beads

[@gracebailey4435]

Thanks so much for posting this! The guys were supposed to install it, and they didn't, so now it's up to me.....and this video is really helpful.

[@DrBDIY]

Awesome. Take your time.

[@gracebailey4435]

@@DrBDIY True confessions, I cried, but I got it to work!

[@DrBDIY]

@@gracebailey4435 That is outstanding ! Good job.

[@dianaxolocotzi1438]

Where do I find the SSID for the machines at ??

[@DrBDIY]

Install the app. Hold the LG wifi button until it blinks. This means the wifi access point SSID in the LG is active. Now connect your phone's network to the LG SSID. Then run the app. It will find the LG and you can ten tell the LG to use your home network's SSID.

[@123rickdicky]

Does the unit come with everything you need parts wise for install? Thanks

[@DrBDIY]

The water hoses, electric cord and dryer tube might be separate. I am not sure if they have a bundle sale or not. Our parts were separate. Some people may already have electric cords and dryer tubes from previous appliances. I read that it is recommended to always use new water hoses.