Make sure you click the LIKE BUTTON & SUBSCRIBE. If you want the music click the JOIN BUTTON 😍
@Белыйипушистыйзайчик2 жыл бұрын
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@gordon_velupillai2 жыл бұрын
can it stream/record gaming?
@crazy89gamer632 жыл бұрын
I have all most the same setup but i don't hear anyone talking about how hot the m.2's get my ones get up to 70c - 84c. Not really happy with the case.
@MoistSocks2 жыл бұрын
Just pre ordered mine. Can't wait.
@rossmpostpro2 жыл бұрын
What a time to be an ITX enthusiast. So many great cases, love the content as always Nick!
@KorpseDusT2 жыл бұрын
Solid case! Gimme a snow edition and id be more than happy to buy it! A touch of RGB wouldnt hurt, ya know, like a thin line to outline the front I/O or something. Overall, a damn fine case!
@DxhlzK Жыл бұрын
I didn’t take note about the pump dimensions and the pump i used have the height of 58mm and it fits but its touching against the side panel.
@stephenpascua97922 жыл бұрын
Sleek build! Will try to build in this one in the future!
@Boombox1987192 жыл бұрын
Might have to change from my slinger sm560 for the aio the sliger is also 11l and these size sff cases are easy to build in until you get to the 12 pin cable as there just to long and I had to get a custom 12pin. However I spent sooooo much on my sliger sm560 in Australia and its red I can't seem to give it up that easily. I wish there where more colours like the nr200 but red
@joethomson84912 жыл бұрын
i do like this case i think i might be getting it or the h1 v2 nice 😜👍
@GearSeekers2 жыл бұрын
Maybe hold off until we do our review ;)
@EdTheNerd2 жыл бұрын
shame its 1mm too short to fit the MSI Gaming X Trio cards many of us already have and cant easily swap
@hakimzenian2 жыл бұрын
If you are to compare this dan a4h20 and iqunix zx-1, price difference aside of course, which one of these two is better..??
@BrookeSeaman2 жыл бұрын
Where can we buy it?
@mihastefanacmaucec70042 жыл бұрын
Hey, do you think arctics ii 240ml cooler would fit? I feel like it has a reelly high water block. If it fits I think its the best mini case u can buy.
@GearSeekers2 жыл бұрын
Nah it wont fit
@cedricphoo2 жыл бұрын
Lian Li Q58 v.s. this case, which one is better?
@GearSeekers2 жыл бұрын
this
@Editnamehere2 жыл бұрын
Meh to the case.
@07350z2 жыл бұрын
MORE CAT!! LESS CHAT!!
@richardfarmer65702 жыл бұрын
Great review. I am seriously considering this case and it is nice to see someone with some knowledge and common sense do a build in one. Also thank you for using the Phanteks Glacier, current gen motherboards are so bad at AIO compatibility and it is nice to see what actually works.
@GearSeekers2 жыл бұрын
Thanks so much! The Glacier without the pump cover has saved me many times with these SFF builds. I reckon they should make a cheaper version without the cover for SFF stuff.
@Boombox1987192 жыл бұрын
The keep out zone on this itx boards are getting ridiculous
@sentryion31062 жыл бұрын
The only itx lga1700 motherboard I can think of that has good cooler compatibility are asus b660i msi unify z690i and aorus b660 (only 1 m2). Asrock ones too and a couple board in Asia that is not available elsewhere
@stuartf59912 жыл бұрын
+1 to this, having the GB 3070 master, I was looking for a ssf option to downsize. Given my gpu is a 3-slot I had limited options.
@noam3d2 жыл бұрын
Then... Phanteks or ROG Ryuo ? What You think guys which may be better performance?
@lhk11542 жыл бұрын
It did what Q58 can’t: support the new Strix cards😂
@GearSeekers2 жыл бұрын
facts!
@buenomini2 жыл бұрын
Can’t you stuff the strix into a q58?
@UnknownUser-fg3fs2 жыл бұрын
See this is why I love itx cases. We’re making innovations vs ATX with is all the same.
@triliner2542 жыл бұрын
Agreed
@GearSeekers2 жыл бұрын
To be fair, I think it's hard to innovate in the ATX space.
@triliner2542 жыл бұрын
@@GearSeekers I mean, it wouldn't hurt to try something out other than the standardised ATX layout. Even if its not very good, thats still progress for the future.
@Matt-gf4gd2 жыл бұрын
@@triliner254 The Hyte Y60 sorta trying something new in the aesthetic ATX market and lian li's O11D Evo sort of with the upright vertical GPU mount and inverse case layout. I feel like ATX just doesn't "need" as much innovation because they pretty much work, whereas ITX cases can be tough to build in.
@amielbenedictsoriano2 жыл бұрын
This is the one for me. Small form factor, no RGB, straight foward, does it's thing.
@stuartf59912 жыл бұрын
Much thanks Gear Seekers for showing this one off. Now it's down between this and the Lian Li Q58. While I would go the NR200, I just wished they brought out a DIY Max version of the NR200 with top AIO support.
@humilicious2 жыл бұрын
i wanted to get this but i already purchase nr200p and the nh u12a then this came out lol
@StraightforwardTech2 жыл бұрын
Damn I love these itx cases! Lian Li has really been killing it lately. And love this collab w/ Dancase as they have been one of the OGs in this space. Edit: ended up preordering this too!
@phil_mehcaulk962 жыл бұрын
cool channel, man!
@StraightforwardTech2 жыл бұрын
@@phil_mehcaulk96 thanks!
@storm912292 жыл бұрын
I think I love this format of your videos with all the prompts you put in. Makes it easy to follow your review even better. I’ve noticed the little but great touches you put into the videos to improve overall cinematic review of your tech products! Great work. I love it!
@KlaireGearSeekers2 жыл бұрын
Thank you!
@qT_p132 жыл бұрын
I had no interest in this case whatsoever, but had the video running for them dope musical interludes.
@eaaeeeea2 жыл бұрын
This is the last piece to a build I've been waiting for over a year to complete, as my 3080 Strix just arrived. Ordered one, hopefully it arrives soon!
@LeslieTheSteez2 жыл бұрын
Baby Cinematic tings with the NEW BEAAAAAAT 🤪!!!
@LeslieTheSteez2 жыл бұрын
I dunno if it's because I have missed a few videos but you're looking slim bro!!
@GearSeekers2 жыл бұрын
I've lost about 9KG
@LeslieTheSteez2 жыл бұрын
@@GearSeekers Bro that's maaaad congrats fams !! You gotta share the secrets !!
@GearSeekers2 жыл бұрын
@@LeslieTheSteez Clean eating between 8am and 6PM. Nothing before or after that window, minimal carbs and a SHITLOAD of skateboarding.
@LeslieTheSteez2 жыл бұрын
@@GearSeekers I am writing notes on this! Need to lose my beer belly from the pandamonium also need to to hop back on my board !! Thanks for the motive fams !!
@Mahmood_Shamlooh2 жыл бұрын
The music is awesome i loved it keep up the good stuff nick thumbs up 👍
@GoodspeedsReviews2 жыл бұрын
Do you do request? Would you be interested in building a Lian Li DK-05? I see a few on KZbin, but not many and most never finish the build, they just stop and never pick back up again. I'm personally building one right now and I have to admit it's a cross between being both easy and hard as hell at the same time. also very expensive as well, but also very satisfying because I definitely love a challenge. I'm getting close to finishing it, I've got one side done and pecking away at the other. Anyway I think it would make some awesome content. I love watching your show, it's very inspiring. Thanks
@raydub2 жыл бұрын
Man... the music in this video has some extra bounce. I love it!
@Klooty6 Жыл бұрын
I’ve just used this case for a new build! 4080 Ventus, i5 13600k, 32 GB ram.
@brianthatsthename2 жыл бұрын
Noti gang 🔥 another fire build 🤙🏼
@GearSeekers2 жыл бұрын
Legend!
@keibohow692 жыл бұрын
Just for fun stand that case on its head and run the strees test again.
@entryfragger4712 жыл бұрын
Hi, I'm switching to ITX SFF soon, can a 750watt psu handle i7-12700K and an RTX 3070ti? Thank you for your answers!
@entryfragger4712 жыл бұрын
Oh nvm, the psu used in this vid is 750watts! XD
@tarraftechnology3044 Жыл бұрын
It's so expensive you can a case for 50 $ why 120 $ + shipping will cost extra 80 $ and dont forget the sfx power supply for 70 $ and micro motherboard those parts will cost you a gold mine
@MultiSciGeek Жыл бұрын
I love the simplicity, but the blandness looks a bit to Apple for me. It'd be amazing to see a glass panel on this, put some RGB element in there and WOW the whole room looks good.
@williamhamala26512 жыл бұрын
Really nice case. if i ever going build a SMF pc i go with lian li this one and Q58
@LeslieTheSteez2 жыл бұрын
NGL The asus rog strix z690-i looks good with the ram sticks without the heatshrink !!
@GearSeekers2 жыл бұрын
I'm a big fan of naked DIMMs too. Really nice for SFF builds :D
@ufc_fan2 жыл бұрын
IF only we could get AIOs to fit on the new z690 boards
@flavioxy Жыл бұрын
and i had trouble with the q58 :D i'd have demolished an a4-h20 trying to fit all stuff in it.
@RafitoOoO2 жыл бұрын
The ITX tax makes you pay more for less features, I love the looks but I don't think it's worth it. At least Nick is here giving us these looks lol.
@papi65182 жыл бұрын
It’s all about the design and engineering as well. Anything you make tinier and function the same will always cost a bit more.
@RafitoOoO2 жыл бұрын
@@papi6518 yeah, and it's also niche, I understand why it's more expensive, but especially in my country an itx board costs literally double of an atx counterpart, sfx psus can cost up to three times and the cases aren't cheap either. It's too much to justify it.
@leonard8766 Жыл бұрын
Song name? Banger!
@madisonberger50752 жыл бұрын
Loving this case. Considering picking one up but I'm not confident my FE 3090 would do well in this case :(
@monolithsoft_guy6 ай бұрын
2 questions: First, do you think the modest size advantage of the H20 is worth losing out on the supposed greater ease of building of the NR200? And secondly, since this video is 2 years old, can you maybe recommend an even better mini-itx case in that is really small, but still good overall?
@GearSeekers6 ай бұрын
kzbin.info/www/bejne/gJSkgH2gZbKhfrc We revisited it a few weeks ago
@JamieR Жыл бұрын
Love these cases. My last NR200P was first SSF I've done and was super easy. This seems even better designed. An RGB strip along top side and down side will give a nice glow out of the holes. Subtle and smooth. Can't wait to build in this.
@peronium_ Жыл бұрын
How is the lower NVMe SSD cooled? Where does the heat energy dissipate? Does it overheat?
@CALiiGeddonTwo2 жыл бұрын
This is a wonderful looking case. I wonder if they will consider making one just a little bit taller to fit a mATX motherboard. Having a Vive VR headset with the wireless adapter I need 2 PCIe slots, 1 fo the wireless adapter and another for the GPU.
@02honeydew2 жыл бұрын
And not pay $300+ for the Sliger case even tho it's nice.
@DannysTechChannel2 жыл бұрын
Nice video mate! Well done. I am in need of an ITX case since my H1’s liquid cooler broke and the V2 that just came out is $400! This looks like it might be a good option.
@Makav3ll12 жыл бұрын
I literally have an H1 cooler for sale if you're interested.
@DannysTechChannel2 жыл бұрын
I sent in the whole H1 to them for repair/replacement and they sent me JUST the cooler back! Now I’m fighting with customer service to get another H1. I’m over NZXT!
@lucav.k.75882 жыл бұрын
They just murdered the FormD T1
@GearSeekers2 жыл бұрын
It really is a good case. I think I'm going to use it for one of my main systems
@coffebot01372 жыл бұрын
very nice one! love those small form factor builds :)
@swizzler80532 жыл бұрын
NR200P all day everyday.
@Zd0g1192 жыл бұрын
Always looking to downsize, this seems great but curious about FE cooler in this case
@GearSeekers2 жыл бұрын
There are additional standoffs they are making to create space behind the GPU. I forgot to mention that in the video.
@imthatguy4912 жыл бұрын
BitWit used an FE in his review of this case and it performed surprisingly well. Like @Gear Seekers mentioned it will include standoffs for the riser cable that will give the GPU space to breath.
@tadejpeckaj1151 Жыл бұрын
Tnx for the video.. cant decide if getting a dan case or NR200P Max
@Hektop1 Жыл бұрын
what did you end up with?
@tadejpeckaj1151 Жыл бұрын
@@Hektop1 lian li a4h2o.. nice one to build in. Got to be careful about the GPU length and thickness (320x61mm max)! But super small… just 11 litres!
@Hektop1 Жыл бұрын
@@tadejpeckaj1151 i'm pulling the trigger on one now, can't wait
@tadejpeckaj1151 Жыл бұрын
@@Hektop1 you won’t be disappointed! Perfect smallest case that supports normal sized GPUs!
@jr0ccc2 жыл бұрын
i think i found my new itx build
@Z-add Жыл бұрын
Is their a flatpacked version like the Formd T1
@BrisyTechBytes2 жыл бұрын
Love this little case, Lian Li stuff is superb, will deffo consider this on if I decide to downsize my Lancool 2 mesh.
@meroastisruined30392 жыл бұрын
i am unbelievably excited for this thing, ive been in love with my dan a4 for years and i have been dying for something that combined the looks of the dan with the radiator space of the sidearm t1/ghost s1.
@michaelmonroe50342 жыл бұрын
I have roughly the same gear... i7 - but a evga 12 gig 3080, my idles are lower.. using the EKWB AIO basic, with two Noctua Cromax fans. I am at 38c idly, the gpu is at 49c idle with the room being around 73F With a slight overclock even. Go figure
@LeslieTheSteez2 жыл бұрын
OOOOOF but this case is looking nooooice but I just bought a noctua air cooler 🤣
@LeslieTheSteez2 жыл бұрын
@dan brown I bought the NH-u12 :(
@tkpenalty2 жыл бұрын
Fractal just came out with an itx torrent!
@tkpenalty2 жыл бұрын
@dan brown u12 wont fit in the nr200
@LeslieTheSteez2 жыл бұрын
@dan brown Defs been thinkiung about it fr fr
@LeslieTheSteez2 жыл бұрын
@@tkpenalty ohhhh shit gotta check it out !!
@SGuppyYT2 жыл бұрын
Sooooooooooo the max supported length of the case is 322mm but that is a 318mm GPU and it looks like it cant get any bigger than that.... What's up with that? I have a 323mm gpu that I'll probably shave for this case
@OldDolio3122 жыл бұрын
daaamn, if it could hold a 280mm radiator, might have thought about switching from my SSUPD. But 11 litres?? My heart wants to go smaller but practically I had a tough time building in the mesh so I know I shouldnt!!
@craigsommerville38632 жыл бұрын
Love the case just hate dealing with riser cables. Given me too many problems in the past so I went with the Ncase M1
@PDXCustomPCS2 жыл бұрын
Hey just a tip. I had the same issue building in some cases with cheaper riser cables. They've never failed me, yet the quality on the ROG Strix riser cable is worth it. Very heavy duty and super flexible. Been running a 3090 on one for a year now.
@Herr.Mitternacht2 жыл бұрын
@@PDXCustomPCS They did failed me and had incompatibility issues as well. Not a fan
@samuelhutahaean25372 жыл бұрын
I have one tiny problem with this case. Not the thermal or component fitment, but the side panel design. Instead of CNC-ing holes, why didnt they use perforated panel instead? Those cnc holes in my opinion *looks* cheap 😔
@Deviantsoundz2 жыл бұрын
They did a really good job making the stuff fit in a case that size, but for me the looks dont do it for me.
@Tiborzts2 жыл бұрын
Amazing Review 🤩🤠💙
@GearSeekers2 жыл бұрын
Thanks so much!
@katzicael2 жыл бұрын
I really like this case, but going off the dimensions for my GPU - won't fit... Gaming X Trio 3080 :(
@Noname304y2u22 жыл бұрын
Someone should make a shock absorbing case for it or just a neoprene sleeve. I would buy this over a laptop If I have a easy method of putting it in my backpack.
@gaminglowspecs2 жыл бұрын
Lian Li Oven.
@GearSeekers2 жыл бұрын
Did we watch the same video?
@nfslpu2 жыл бұрын
That's an insanely small case!
@GearSeekers2 жыл бұрын
It really is TINY!
@jfaristide2 жыл бұрын
mine should be here thursday or friday. looking forward to the build. really hope the standoffs are in there, since I've got a 2 slot card
@theking8yearsagoedited4822 жыл бұрын
Can u pls show me how do you route the aio tube so that it didnt block the gpu space? Cause I have a problem with the tube router, and im using same case and cooler
@liamsenn77 Жыл бұрын
great review, great comment, nice to point out that rgb is basically useless since we cant see into the case. Thank you
@Aquve2 жыл бұрын
I haven't watched your vids for a while, since I'm pretty much settled with my pc. But I have to tell you the music you're making is superb. Do you have like an album or place where ppl could buy it? Best of luck!
@Trajectoree2 жыл бұрын
I believe he has a link or recent video with his music if you're interested Edit: kzbin.info/www/bejne/l37SgZicl8SkiNk here is the link to the video and I see if you click the join button on this channel you can also get access to the tunes.
@Aquve2 жыл бұрын
@@Trajectoree Thanks big time!
@GearSeekers2 жыл бұрын
@@Aquve Click that little join button :) The Cinematic song is only a couple days old. I'll upload it over the weekend.
@ajmatt2 жыл бұрын
This case seems like an upside down lian li q58 with even worse cable management. Man your case reviews are spot on! I got my lian li q58 after watching your review. Speaking of which I shoved in my MSI 3080 Gaming Z trio in there with an ungodly amount of force aftwe watching your review. (the right most fan wouldn't spin because the shroud bends against the power button casing and hits the fan, which I fixed after removing the foam padding ) Now I'm scared to remove it again lol.
@Ashaweshk2 жыл бұрын
But will it fit the even massiver MSI gaming x trio 3070ti? O.o
@Lawd_Kolya2 жыл бұрын
Still very happy with my Meshlicious, otherwise I would definitely have bought this case! And of course... I would change the fans that come with any AIO to Noctua fans.
@Phalaxis832 жыл бұрын
Sweet looking case. Would be great for a HTPC. Excellent video fams. I'm still subscribed ;)
@guffey19892 жыл бұрын
Looking like this will be replacing my Silverstone SG13 soon. Being able to cool with a 240mm AIO and still keep the same super small volume? Yes please.
@Drone4432 жыл бұрын
What are other competitors are out there? I know of Sliger and the Formd T1, as well as the Ghost S1
@ecohangout44812 жыл бұрын
everything is good....... but unfortunately the build and looks are just a fail for me.
@ZR_ZingoRingo2 жыл бұрын
Can you use the ROG Strix NVIDIA GeForce RTX 3090?
@Spawn223311 Жыл бұрын
would like to se an air cooled build
@liamgalt2 жыл бұрын
Really relaxing overview. definitely would get this when I have the funds.
@iSin_2 жыл бұрын
Is it possible to run a 3080ti with a 750 sfx PSU?
@marviccadabuna82872 жыл бұрын
aware me on its temp, why it didn't have fans for intake exhaust. etc
@memzel2 жыл бұрын
5950x + 3080 FE? Would you recommend in this case
@k12rising2 жыл бұрын
This case is same size as Ghost with tophat. I think it looks amazing and the USB-C port is a nice touch.
@boah-ist652 жыл бұрын
Does the phanteks aio come with the 1700 bracket or do you need to get it!
@su6oi2 жыл бұрын
do you think its possible to squeeze an aorus master card in there?
@ams27372 жыл бұрын
are there any AIOs that will allow us to use the phanteks T30s in this case?
@kevinbryantsr.64432 жыл бұрын
Excellent case it seems and definitely worth the price unlike the “New” $400 NZXT H1 version 2
@GR-cd2kx2 жыл бұрын
Nice review. That looks like a solid SFF case. Can you fit a couple slim fans at the bottom for intake?
@munchkinmatt16702 жыл бұрын
I wonder if the Phanteks T30 fans will fit with the AIO.
@gahbor2 жыл бұрын
forgot to edit 4:50 😅
@GearSeekers2 жыл бұрын
Nope. Left in to make you comment. I don't make mistakes ;)
@Dreak1172 жыл бұрын
Your videos are always the best IMO compared to other peps. I like yours because you provide information and I still get to see the building process and admire the work committed to building this. I'm really stuck on which case to get at this point. I have SO much research my head is going to explode. The only reason why I want to avoid this case just SLIGHTLY is I wanted to avoid PCIE riser completely. Just haven't decided yet. Once again, awesome video. Currently thinking about a SUGO16 odd choice but as long as any case fits in the backpack. I can game at my part time job. Thus why I gotta have a SFF case to fit in a backpack. :)
@jkane7642 жыл бұрын
Great video! Have you come across any heat-related issues?
@EvicFiniteGen132 жыл бұрын
oh man... i have a rog strix.. always wanted to make a small itx case....
@seamusmcgowan12 жыл бұрын
Are the radiator fans pushing air out of the case or pulling into the case?
@bralis22 жыл бұрын
I like how you managed to find a good place for AIO tubes (others tend to put them at the top). Thumbs up!
@cristianperez76512 жыл бұрын
Great review , in Spain only managed to get the pcie 3.0 , can you say what riser i need for change to 4.0? The support day me 20 cm 360 degree inverted but i cannot find , thx
@nitnap2 жыл бұрын
I bought the case that came with the 3.0 version by mistake and had to buy a 4.0 riser separately recently. I bought the LinkUp Ultra PCIE 4.0 Dual Reverse Socket Riser Cable 20cm. Works perfectly. As long as your riser cable is duel reverse and 20cm, you’ll be fin. One note though, the screw holes for the female side of the linkup riser cable do not line up with the stand-up’s pre-installed on the case, but there are holes drilled on the case that you can move the stand ups to that will fit this riser cable.
@a23b462 жыл бұрын
I still like ghost S1 can expand for fans and stuff