That your making a liberty ship that usually took a month to build at the height of ww2 irl and your creating a liberty ship model in one day I reconized that right away :P
@greenseaships2 жыл бұрын
yup! :D That's the spirit, one might say.
@rodclark44852 жыл бұрын
I love that you have multiple workbenches! That was my practice for woodworking, but I never thought that i shud have 2 or 3 benches in my model aircraft/model ship workshop. Thankyou ! I'll use your vid to justify the benches to my lady.
@stevedavis94466 жыл бұрын
hello, i know who bob is from dry dock and enjoyed watching your quick and easy scratch build i think many younger model builders will learn from this and help them think out of the box to create a ship of there own.for our hobby has created alot of prefab boats for the person to get right on the water.to build you own is much more rewording. dummas boats has always been the go to for ship building for many many years i bought my first kit from them and built it with my father and what a great time we had,im 55years old and glad we did that when i was 12years old.
@nurzulaikhasyakirahmohdnor86996 жыл бұрын
I watched until the end and was so moved to see it move in the water! This is so cool!
@greenseaships5 жыл бұрын
Thank you!!
@Klomster886 жыл бұрын
These RC boats are so harmonious when they sail through the water. Makes me wanna get one myself. But i'd just go overboard with the details, get stuck on some pointless setback and never finish it. But i can appreciate the ships of others instead. Nice build.
@philldownes86853 жыл бұрын
you done realy good
@greenseaships3 жыл бұрын
Thanks!
@brianroberts8152 жыл бұрын
Great build. I'm surprised that you didn't install any internal bulkheads or ballast.
@greenseaships Жыл бұрын
No need really. Remember the whole hull is above the waterline really.
@PiperStart3 жыл бұрын
It was a nice touch to place the rusty remnants of the real ship in the hold of the model.
@shipsofscale3 жыл бұрын
Very nice. Enjoyed it.
@greenseaships3 жыл бұрын
Thank you! I'm glad you did.
@PiperStart3 жыл бұрын
Excellent concept. As a ship modeller I enjoyed this a lot.
@greenseaships3 жыл бұрын
Thanks!
@Hannodb19616 жыл бұрын
Thumbs up if you've build a RC ship, and you got one of the following comments: 1) "Oh wow! Is it the Titanic?" 2) "That's beautiful. So when are you going to add the sails?"
@greenseaships6 жыл бұрын
I've had people say "It's the Titanic!". And it was my Carnival cruise ship Imagination. -_-
@Hannodb19616 жыл бұрын
At least your ship still falls in the category of "passanger ship". I have a general Cargo ship, with cargo bay doors and derricks all over the place, and still people ask me: "Is it the Titanic"? I get a sense that the average person think maritime history goes something like this: Long ago, all ships were sail ships. Then one day, someone had the genius idea: Let's build a large ship that use engines rather than sails, with luxury apartments, and water tight compartments so it would never sink. Then it sank, and everyone decided that was a bad idea and just continued building sail ships instead. The ships you see in the harbour today does not really exist. It is just a figment of your imagination. All ships are sailing ships. Except the Titanic. Its the only ship that didn't have sails.
@michaelz76836 жыл бұрын
If they made a full size ship in under 2 months, of course you could build it in a day
@greenseaships6 жыл бұрын
Yup! That's the reason I chose a Liberty ship for this build :)
@robertxing85656 жыл бұрын
Michael Z Ahem.... *quickly mumbles* 4 days. But it broke in 2 but still one liberty was finished in like three weeks
@DARIVSARCHITECTVS6 жыл бұрын
BRAVO! I used to sail a similar ship, a C5 cargo vessel as an Engineering Officer. I loved how fast you built a workable model that you can actually play with on the water. VERY cool.
@greenseaships6 жыл бұрын
Thank you! I'm glad you found the video! What ship were you on?
@DARIVSARCHITECTVS6 жыл бұрын
A C5-s-75a originally names S.S. American Mail (Mail Lines), then President Cleveland (American President Lines), then S.S. Cleveland (SeaLift, Inc.). I served first as her Engine Cadet Midshipman, then as her 2nd Engineering Officer, touring cargo runs in the Far East. She's scrapped now (1996), but I have copies of the General Arrangement blueprint and tons of photos from all my voyages, and may make a model of her when I get too old to motorcycle in Yellowstone National Park!
@greenseaships6 жыл бұрын
God speed!
@robertrussellmd6 жыл бұрын
This is a great way to get a very enjoyable and attractive fun scale ship ready to run in short order. Thanks for sharing. If you have any refinements in your technique please be sure to post another video.
@greenseaships6 жыл бұрын
Thank you! As a matter of fact, I'm planning a series on my 8-foot Queen Elizabeth 2 model later this summer. I do have some refinements to cover, especially in detailing.
@WrightBrosRC6 жыл бұрын
I'm surprised to see how well it steers without a true keel to work with the rudder. Very nice job, Thanks for sharing the ships history too!
@greenseaships6 жыл бұрын
My pleasure!
@diogenes344 жыл бұрын
Very cool you did it.🤗👍👍👍👍
@greenseaships3 жыл бұрын
Thanks!
@davidthompson68343 жыл бұрын
They saved are necks in WW2 fair play to you
@modahead3 жыл бұрын
What fun! Enjoyed watching!
@stejer21111 ай бұрын
But... does it break in half right in front of the bridge in bad weather, like the real one? 😁 A well deserved speed build tribute to an underappreciated war hero.
@johntripp51596 жыл бұрын
20:41. Next time use a shelf clamp just like in the shipyard; a 1/4" wide strip of matt board will hold your deck from below with white glue. Happy modeling
@МаксимСвечников-ь6ю6 жыл бұрын
So quick built, but so nice! Cool!
@robertrobertson94043 жыл бұрын
Really enjoyed the video! Thanks
@eastlight3133 жыл бұрын
Looks great thanks for the video!
@KWShipping6 жыл бұрын
Wow, I really learned a lot from this video, thank you for making it! :D
@MarkAnthonyHenderson2 жыл бұрын
That's is pretty amazing.
@greenseaships2 жыл бұрын
Thank you!
@angluneenon4 жыл бұрын
as 'crude' as it is, it's still a very nice model.
@greenseaships4 жыл бұрын
Thank you!!
@tonywright82946 жыл бұрын
Superb
@robertrussellmd6 жыл бұрын
Inspired by this video, I have begun an Istanbul ferry, the Pasabasa.
@greenseaships6 жыл бұрын
YES!!! This is EXACTLY why I made the video! Don't give up! Keep testing, practicing and improving! My first boats looked terrible. But I didn't give up. Good luck!!
@robertrussellmd6 жыл бұрын
greenseaships Thanks for the encouragement. I am slow but tenacious. I plan do an RCGroups build log. When I do, i will send a link. Thanks for the ideas. One of the things I like to do on airplanes is use brown paper and water resistant carpenters glue to surface raw foam. I will do this on the entire hull foam core and the raw foam end pieces. We will see what water soaked PVA glue does to foam core. The hull and main deck are complete. My mat board came in today so the upper deck construction will start soon.
@RichadTheLionHeat4 жыл бұрын
Very informative, educational, inspiring, enjoyable, entertaining, encouraging. Learned a lot. Thanks for sharing. Continue your efforts, looking forward to more of your valuable films. God bless.
@angluneenon4 жыл бұрын
would love to see more of these videos!
@jimmorris39434 жыл бұрын
Just watched How to Murder Your Wife, Jack Lemmon! It showed a Liberty shop that did have blue funnel and blue vents around. Thought you may like to know. Liked the model.
@greenseaships4 жыл бұрын
Thanks!!
@carrcohol6 жыл бұрын
I have to say you really nailed the spirit of a liberty boat. Impressive just one day. I think your scale speed however would be pushing 75 kts give or take. Fantastic work, and thank you for the video.
@greenseaships6 жыл бұрын
Thank you! Though she'd really be pushing 2-3 knots (give or take ;) ) if she were applied to full-scale boat/water physics.
@nztphotography57586 жыл бұрын
Oh damn, A DAY!? amazing!
@johnbrock16026 жыл бұрын
I reminder went that ship ran aground. An driving down to see it this bring back memories
@greenseaships6 жыл бұрын
Glad to hear you found this video! I only first visited her last summer. I was hoping someone like you would run across this.
@jarroddraper51406 жыл бұрын
Do u remember the colors
@okxtan26484 жыл бұрын
Well a very simplified model.. My father was mecanic on the u.i.m. Oradour.. I remember some beautiful sharp pics of she.. one, where my brother and my sister were near the bord ladder on the dock with my father in front of the ship.. very old time now.. Today, I read that the boat after being solded to a liberian company in 1964 (renamed "Zaneta")was sank in Arabian sea in 1966.. Such a shame..
@dirkhartman95724 жыл бұрын
Amazing model The dominator"s funnel was yellow
@greenseaships4 жыл бұрын
Thank you!
@blusnuby26 жыл бұрын
BRILLIANT !
@TheGryxter6 жыл бұрын
Wow, terrific build! You really walked us through it like a school teacher. I feel anyone with a little patience could pull this off. Outstanding. I have a question, I couldn't find any listing for the fittings you used. (aero-naut) Where could I find a catalogue? Keep up the amazing tutorials! Smooth Sailing : )
@greenseaships6 жыл бұрын
Thank you! I hope it helps people. As for the fittings, do you mean the air vents? I get those from harbor models online. All other fittings on this particular ship were just repurposed sprinkler parts or small wooden dowels from the hardware store! :D
@msgtgb6 жыл бұрын
Amazing! I enjoy your airplane videos as well!
@greenseaships6 жыл бұрын
Thanks!!!
@RobertJohnson-KLFK5 жыл бұрын
Have you ever considered using aluminimum duct tape (not ducktape) instead of masking tape on the seams? It wouls be more durable and less fragil than the masking tape. Might even be thiner than the masking tape.
@greenseaships2 жыл бұрын
True, but in my experience, that kind of tape doesn't take paint well. Chips off more easily than masking tape.
@bvmbvmdestroyer6 жыл бұрын
i dont have any ship building expiriance, because im 12 but t=THAT is a bueaty of a ship wel done
@greenseaships6 жыл бұрын
Thank you!
@bvmbvmdestroyer6 жыл бұрын
no problem!
@DIY-DaddyO3 жыл бұрын
Great work and very informative. One bit I’m struggling with is marking up the foam board from the drawing, how do you allow for the curve?
@greenseaships3 жыл бұрын
I crimp the foam board over a table to make the curves of the bow. For the curve of the very stern, I use solid foam block carved and sanded into shape.
@Exitore7 жыл бұрын
Very helpful :D
@mariusiosca65146 жыл бұрын
Just wow , one question, I would like to make this model with added bait boat modules , do you think it will hold 500 grams of fish bait on each side ?
@greenseaships4 жыл бұрын
Yeah I don't see why not! The onboard battery weighs more than that.
@johnbrock16026 жыл бұрын
I talk to my friend an he said it was rust color. I forgot he is a few years younger than I am an saw the ship a few years later than I did. He said he will ask he older brother maybe he will know. When I hear I will pass the info on to you. Sorry it is taking so much time.
@greenseaships6 жыл бұрын
Thank you! Sorry I just noticed your reply!
@benemikeandreas50595 жыл бұрын
Wow
@georgeheyduke20602 жыл бұрын
That would be really cool with a little steam engine for power!
@calvinhuddleston5764 жыл бұрын
Amazing, if I were to do this how much would it cost assuming I don't have specialized tools or parts lying around?
@greenseaships4 жыл бұрын
Well the running hardware I used here (prop, shaft, connector to the motor) cost probably $50-60 from Dumas. The motor I had lying around but radio shack used to carry them for like $5. The radio is 2.4ghz Specktrum DX6i. It retails for about $80-100. I think Spektrum DX5 is cheaper and will work just as good. Rudder hardware I got from the hobby shop for >$10. Rudder servo maybe $20. Battery is a 2-cell lipo. You can get one from Value Hobby for about $20-25 I think. Charger I use is a 4-port lipo charger that goes for about $75 but you can find cheaper lipo chargers online. Just make sure they are for lipos. As for the build foam, I have no idea since I get it from work. But I'm guessing this thing has less than $50 worth of dollar tree foam in it.
@calvinhuddleston5764 жыл бұрын
@@greenseaships thank you so much, I'd reckon the dollar tree foam cost less sand luckily I already have a transmitter
@steves78964 жыл бұрын
How do you keep water from coming in through the propeller shaft tube?
@greenseaships3 жыл бұрын
For one matter, the prop shaft rises up above the water line inside the hull, so water naturally doesn't rise above its own level, at least not much. The shaft is not threaded all the way, so there isn't anything really to grab the water and suck it up into the boat. For another matter, I lube the shaft with lithium grease.
@randomrodent91246 жыл бұрын
That was a very nice model and an impressive short building time (I like old-style ships). May I ask you a question about the Polycrylic, does this product only waterproof or does it also provide strength? I am asking because I have a balsa hull which needs to be sealed and I do not like working with epoxy products which is, to my understanding, often used on balsa hulls.
@greenseaships6 жыл бұрын
Hi and thank you! I use about 2-4 coats of polycrylic spray and no, it would not provide structural strength. The best if could do is offer some protection against small scuffs of the occasional fingernail scrape. If I were to do 10+ coats of polycrylic it might be another story. But 2-4 coats is simply water protection. For your balsa hull (assuming this is re-enforced with formers inside the hull), you might do quite well with a product called STYROSPRAY 1000. It is available from Industrial Polymers. I usually use that to coat my hulls.
@randomrodent91246 жыл бұрын
Thanks for reply, much appreciated. I will look into the Polycrylic and Styrospray 1000 and consider. The deck is not yet glued on so I am able to easily strengthen the hull with additional internal doublers and supports in case of using waterproofing (Polycrylic) only. Will figure out how to proceed.
@hashilnaseer95344 жыл бұрын
Please tell the name of Material is used making Hull? Its available in market?
@greenseaships3 жыл бұрын
In picture framing we call it foam core board. In model airplane hobbies I think it's called dollar tree foam. I've seen it sold at Michael's.
@vincentdevitt76852 жыл бұрын
Very nice I have to say but ; for me the speed makes it look unrealistic as with quite a few of these model ships and boats , ease her back a little .
@JoeMarrero-manvscode Жыл бұрын
Dave's Drydock sells pirated copies of various ship plans.
@greenseaships Жыл бұрын
Yup. My favorite seller was Messmar who scanned from Shipbuilder magazines and assembled cardpaper deck-by-deck models with them. He had a dizzying array of ships.
@nonexistantman57975 жыл бұрын
You just helped the war!
@roberthanus2073 жыл бұрын
Do you add anyopen air vents in superstructure to let motor run cooler ??
@angelolorenzo55753 жыл бұрын
what materials didi you use?
@greenseaships3 жыл бұрын
Foam board. Called foamcor.
@DoItYourself-DIY6 жыл бұрын
cool
@mariaaucapina5312 Жыл бұрын
Que material es el que usa?
@favourogbenna44026 жыл бұрын
please what materials were mentioned from 5:04? .I could'nt hear it clear
@tanegashima53955 жыл бұрын
Does the enamel paint last a while? I'm thinking of building my own ship (for the first time) out of foamboard, and waterproofing is a problem that I've thought of for a while.
@greenseaships4 жыл бұрын
Seems to last for years! But watch out if it gets dented or punctured! You may have to treat with epoxy and repaint.
@nileshvegad81835 жыл бұрын
Sir upload a caurise ship model making video
@greenseaships4 жыл бұрын
My camera is dirty and has been so for months. Still pictures aren't so bad but I need to send it off to be cleaned before I can do more video :/
@bluerapper16 жыл бұрын
Can you send the link to that guy who has the plans because I can not find that channel or ebay account
@greenseaships5 жыл бұрын
Sorry I didn't see your comment! Here he is! www.ebay.com/usr/davesdrydock?_trksid=p2047675.l2559
@pawankr-865 жыл бұрын
Please.. can u help me out in making this model
@edannyamuk3 жыл бұрын
terbaik.
@J-10ALover4 жыл бұрын
I can’t find the taser 19 thing anywhere
@greenseaships4 жыл бұрын
Try the Hobbywing QUICRUN 1060 Brushed ESC. You can find them on ebay and they are cheap!
@mrsparkles52944 жыл бұрын
what esc and motor are you using for this?
@greenseaships4 жыл бұрын
Just a Tazer 12T ESC and a Traxxas 380 brushed motor.
@nileshvegad81836 жыл бұрын
How make to tharomocol Bulbous bow pls reply sir...
@greenseaships6 жыл бұрын
I'm not sure about making bulbous bows. All my ships are waterline models so I never have to think about it.
@nileshvegad81836 жыл бұрын
But I have making boat with Bulbous bow😢😢😢
@nileshvegad81836 жыл бұрын
I am indian and gujrati . i tharomocol's boat model making and only for put my show room
@johnbrock16026 жыл бұрын
About the color just off hand it was not a light color it was a dark color. I have a friend that saw it and I will ask him. The bow was up an out of the water for a longtime. Let me talk to my friend an I will get back to you.
@greenseaships6 жыл бұрын
THANK YOU! You mean the funnel color? Or the deck color? Look forward to hearing from you again.
@Doyle-4 жыл бұрын
Well But Richmond Shipyard Can Make The real One Only 4 Days And Its Broke
@charlie18726 жыл бұрын
Congratulations! That is fantastic. I served my apprenticeship as a Draughtsman in John Brown’s Shipyard but left in 1973 to head to CANADA. I have a love for ships and on a recent trip back to Glasgow I made a video at the site of the shipyard m.kzbin.info/www/bejne/lXeQpmiQqKaUa6M Iam building a Clyde Puffer and have the plans so that I can place it into my model railway 1/4”: 1’-0.Where are you located? Our daughter lives in LA and we visit once a year, would like to have a look at what you have done.Before I LEFT Scotland the shipyard was owned by Marathon from Texas to build rigs but they brought in a Liberty chip for conversion to a drill ship. I worked on that for a few months before I left. What did you use to glue the Hull together?Once again, great work.
Great build. I'm surprised that you didn't install any internal bulkheads or ballast.
@greenseaships Жыл бұрын
Thanks but being so light, and a waterline boat she doesn't need ballast. These things are a lot more stable on the water than you may think.
@favourogbenna44026 жыл бұрын
please what materials were mentioned from 5:04? .I could'nt hear it clear
@greenseaships5 жыл бұрын
SO sorry for only now seeing your comment! Those are wooden dowels. You can find them at a hobby or crafts store. Hardware stores sell them too. Hope you get this reply!