Lidl PARKSIDE ® PIFDS 120 A1 weld 0,8mm steel without gas / Flux welding Test

PARKSIDE ® PIFDS:
www.lidl.de/p/parkside-schwei...
Lidl PARKSIDE ® PIFDS 120 A1 weld 0,8mm steel without gas / Flux welding Test

[@ionpiatra8302]

Buen trabajo!

[@peterbatka1869]

perfect video

[@alexwade9921]

Can you go any thinner? 0.6mm steel, 24ga?

[@edilbertoordonez1255]

Dónde la compraste

[@sharonluke3977]

That was the best video I’ve seen on this machine thank you. Can I ask would the 0.6 wire you changed to work on welding nuts together as I’d love to make a torso I’ve seen online..

[@Marc.Lanting]

it works much better with 0,9 on 0,8mm steel

[@zaid-je5es]

Only mig welding in this machine??

[@williamkilpatrick101]

Is it fitted with a 13amp plug for 240 volts?

[@thequietroom3991]

Just bought one yesterday. Anyone able to tell me why my .9 wire arcs once with a pop, mc doesn't feed. Rollers are tight enough I reckon as it fed through from the start.

[@jaybradley3765]

Would this weld 0.7mm without blowing holes? Thanks

[@adamjonas9646]

hey anserw pls can i weld car body with this welder?:)

[@mehere3013]

best wire for car panels

[@giulianorapone8047]

Ciao Gustavo dove posso comprare il filo per questa saldatrice 0,8 0,9 e da 16

[@vladostevanovic356]

Kako podesiti da neprska prilikom varenja i koji materijal varis sa zicom Od 1m i 0,9 m Tenks

[@giorgosnak9927]

What is the thicknesses of the pieces you are welding!!

[@ivicastjepanovic7800]

0.8mm

[@giuseppebevilacqua2034]

Hello mate,i tested this morning.....great machine...👍👍👍👍👍👍

[@sawek8880]

Can you weld cast iron with this welder?

[@evanleebodies]

Can cast iron be welded?

[@solangigh.rusool7803]

Hi

[@aleksandarsrdanov1171]

Can I use "PARKSIDE® cored wire »PSFD B1«" with this device?

[@adamjonas9646]

why not?

[@aleksandarsrdanov1171]

@@adamjonas9646 Can you tell me what is the difference between Parkside welders PFDS 120 A2 and PIFDS 120 A1? Thanks.

[@BE-ART]

@@aleksandarsrdanov1171 The PIFDS 120 A1 has an inverter

[@aleksandarsrdanov1171]

Thanks

[@haikatem]

Can this weld aluminum?

[@timobreumelhof88]

No

[@mariuszklodowski2862]

Warto kupić tę spawarke????

[@user-nv9lw6zu1l]

Cześć. Kupiony dzisiaj w Hiszpanii. Będę w Polsce za 4 tygodnie. Jeśli nie zapomnę, napiszę jak to działa. Kupiony w Lidl za 89,99 euro.

[@damnthiccassboye7138]

Tak dobra

[@brianhowe982]

Definitely, I bought one it’s really good

[@shanmuganathan5630]

What isthe prise?

[@spliffz0rplayingcallofduty637]

very cheap , 100 euro or so

[@impazzitoinvolo]

Bella prova! Molto bella! Presa in Italia a 119€: kzbin.info/www/bejne/op6kfmWVbL-rn68 Unboxing con dati tecnici: kzbin.info/www/bejne/m4ikY5lqpNeskJo

[@evanleebodies]

For the price, this is an amazing welder. Had mine for a few weeks now and it welds good straight out the box. However.......if you decide to get one the first thing you should do is remove the existing earth clamp and replace it with a good quality clamp. The supplied clamp is made of poor quality mild steel, I replaced mine with a decent quality clamp with a rating of 200A.

[@departe5672]

Would you recommend buying this to weld car seals?Car panels,doors?