We have listed some tools that made the assembly easier for us. To ensure a safe assembly, At least use the tools recommend in the manual.
@heiropentred74293 жыл бұрын
@@LifetimeProductsAssembly so i saw the whole video so i technically just need a piece of wood and a drill with different parts for the tools?
@fieryashes82111 ай бұрын
What the inner guard for as mine was made with the inner guard and putter guard switched around so the inner guard is on the outside
@cunghnin89152 жыл бұрын
Ugh so many steps just to get the first part and it took us 3 days to build this exact basketball hoop and the box said can be done in 3 hours
@ArrogantBaSStard2 жыл бұрын
I did it myself in about 3 hours or less. Yes a lot of parts but very easy.
@Horselover_243 ай бұрын
@@ArrogantBaSStardagree
@MamadouDiallo-iv5nn2 жыл бұрын
Hi. After finishing assembly I can't make it go down. It's still a the maximum high. Gas string does not move.
@LifetimeProductsAssembly2 жыл бұрын
Here is a video on how to adjust the height of our basketball hoops kzbin.info/www/bejne/roClaKdjapZqq7s. If this doesn't answer your particular issue or if you have additional questions we recommend reaching out to our customer service team. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).
@ArrogantBaSStard2 жыл бұрын
What is the lowest setting the rim can go to? Is it 7 feet or 8 feet? Thanks!
@LifetimeProductsAssembly2 жыл бұрын
The lowest setting is 7 ft on all our systems minus the youth systems.
@ArrogantBaSStard2 жыл бұрын
@@LifetimeProductsAssembly thanks. I am having trouble getting it down lower than 9 feet.
@LifetimeProductsAssembly2 жыл бұрын
Go ahead and send us pictures to reviews@lifetime.com so we can take a better look at what may be going on.
@sagerisky88502 жыл бұрын
@@LifetimeProductsAssembly is it 7 feet to the bottom of the backboard or to the rim?
@christinachapman99667 ай бұрын
When I go to put the arm bars into the pole there a quarter of a inch to long and I have the correct pole at the bottom because it’s the same length as the middle pole and the smallest pole goes on the tip top if I move it at all for the arms to line up with the holes it takes the wheels on the top of the bottom part that you would put the sand in did the factory mess up??? I’m doing everything the direction and this video is saying they just will not line uo
@LifetimeProductsAssembly7 ай бұрын
Give our customer service team a call and we can trouble shoot the issue with you and see if we can help figure out what's happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).
Hey I was at a quick question I'm repairing one for some friends or some neighbor kids down the street. But I got it all reassembled and everything looks correct. But the backboard looks like it's tilted back just a little bit. Is that the correct position
@LifetimeProductsAssembly Жыл бұрын
No it shouldn’t be. Make sure that the V-Shape brackets on the back of the backboard are fully tighten. If they are, there may be other issues going on. Please send pictures to customercare@lifetime.com so we can take a better look at what could be the issue.
@TIMEX19752 жыл бұрын
hello i can't get it to adjust correctly to stay higher. what should i do? i think i put something together wrong.
@LifetimeProductsAssembly2 жыл бұрын
There could be different scenarios on to why this could happen. Would you mind emailing us pictures to youtube@lifetime.com so we can troubleshoot some ideas on what could be going on?
@ThePathOfLeastResistanc Жыл бұрын
Why do you need a block of wood lol it says nowhere in the directions
@orbitservices7002 жыл бұрын
How do I lower the height?
@LifetimeProductsAssembly2 жыл бұрын
kzbin.info/www/bejne/fYjcm3SefNd7ZpI try this video!
@12_jay139 ай бұрын
What would happen if u put the inner gaurd bolt in a diffrent hole other than 3? 6:32
@LifetimeProductsAssembly9 ай бұрын
If the bolt is not in the correct spot, the system may not adjust properly and you will probably have issues with the installation as parts will not line up correctly.
@declanquinn9215 Жыл бұрын
What is the zize of the rim
@LifetimeProductsAssembly Жыл бұрын
18"!
@kenzilla3934 ай бұрын
Anyone else noticing that their instructions aren't matching the instructions of the video
@LifetimeProductsAssembly4 ай бұрын
What is the model number of your basketball hoop?
@kenzilla3934 ай бұрын
@LifetimeProductsAssembly 90585, I scanned the qr code in the manual to get to this video. Some of the instructions I was able to follow but some were either out of order of missing
@LifetimeProductsAssembly4 ай бұрын
Thank you for bringing this to our attention, we are going to work on resolving this. Here is the link to the correct video - kzbin.info/www/bejne/eaLZaKx-bZZ-e9U