Lifetime Tamarack Angler 100 Kayak Upgrades and Modifications

[@dlsgl407]

Great video, thanks for demonstrating water proofing the holes you drilled. I too plan to use a float cushion rather than a stadium seat - multi purpose and an added safety devise. I also saw a suggestion a float can help hoist your body up on the boat after a flip (push down on it's strap with your foot) your video made my decision. Thanks again.

[@deedo1352]

Great video. Love to see how others are modding their Tamaracks. I did my crate like yours and had some bungee netting I zip tied over the top of the top. Put my plastics in there in the bags they came in. Works great!

[@JoyZofSoRRoW]

Wow... You got some good mods going. Gave me some ideas for my tamarack too. Good video.

[@HectorRodriguez-nk9hq]

Definitely following this guys kayak mods i love it.

[@Solos420]

easy fix to your seat problem is to look into a stadium seat I picked one up for my yak and it was the best addition I added to mine

[@MissionForFishing]

Thanks, will check out!

[@johnalpha1020]

Try attaching your soft plastics to the underside of your milk crate “hatch door”. Won’t interfere with your planos that way.

[@ith0rn329]

Dude these are awesome ideas, and you made a great video! Keep it up bro 👍🏻

[@derekdavidson3205]

Nice work youngster keep it up

[@davidlewis9572]

If you add a short section of milkcrate to the bottom of your big crate it will sit level over rear hatch lid

[@jackinthewoodsii8653]

I could never understand the milk crate mod. Soft packs, dry bags and backpacks are easily stored under the bungies and will conform to the shape of the kayak. If you need a variety of lures a vest with many pockets allows easy access.

[@AfroBassin]

Love the video i have the same kayak i love it great price to get on the water. just subbed!

[@cameronyoung2004]

I got a 6 gallon milk crate i love it

[@HeMi-LuST1012]

I just bought one and noticed you have a your adjustable rod holder at different angles. How can u do that? Mine doesnt swivel. It just points 1 way across my kayak width ways or if I flip it, then the opposite but not at angles like urs. Help please

[@MissionForFishing]

There's a small screw that you can loosen and adjust the pitch of the rod holder. As far as the rotation outwards goes you lift halfway up and turn the mount in its built in holder and then push the rod holder back down to lock it in place. It took me a little bit for me to figure it out and it takes a little bit of finesse.

[@HeMi-LuST1012]

@@MissionForFishing thanks for the help, but like mine has only one way I can put the rod holder into the built in hole. It has a notch that the rode holder has to line up with just to lock into place. But it looked like you had yours turned at different angles like yours has more then 1 notch? Or how about, can you rotate your rod holder in any direction you want or can you only have your rod turned 2 ways only?

[@HeMi-LuST1012]

@@MissionForFishing I figured it out. Thank u

[@nicholasmattiello8959]

Put a Bungie net over the top of the other milk crate and put all ya soft stuff in there

[@johnwolstenholm9102]

Put small bungee cables criss crossed on the top crate and keep them in that 3:33

[@kevinadams8507]

i see a lot of those anchors. How much does yours weigh? No one ever says... Thanks!

[@MissionForFishing]

I believe my anchor is a standard 2 1/2 pounds.

[@andrewcahilly6264]

Good upgrades . Instead of using the screws get kayak rivets and silicone, instead of the pad use a stadium seat

[@dlsgl407]

Why use rivets vs screws - just wondering, planning some work on a boat that is on its way

[@johnguth5376]

Why use zip ties when with a little more time involved you can use ca cabinet or piano hinges!

[@MissionForFishing]

Yeah, that would probably work pretty well with some rivets.

[@fasttrack5572]

Did you do anymore upgrades to your Tamarack?

[@MissionForFishing]

No but we have a few more coming up

[@JohnKlopp]

Looking good! 👍

[@thomasgerstenberg1632]

Your upgrades are some of the best in several videos, great job! Only suggestion is stadium seat for your arse....

[@isaacroufs5779]

Looks good!

[@TheBeanMan00]

Hey can you drop links for this?

[@MissionForFishing]

Anchor Cleat: amzn.to/30fTQ5P Anchor: amzn.to/2Mwsz76 Paracord: amzn.to/309978j Milk Crate: amzn.to/3eUmnC2 Tackle Trays: amzn.to/3gTtSuA Dry Box: amzn.to/3dBTuKp Pulley: amzn.to/2Y8Hsls Carabiner: amzn.to/2Brg61Z Gorilla Glue: amzn.to/3dzslIf These are from my most recent kayak video where I did a review of all the upgrades on the water. *The above links are Amazon Associate links*

[@TheBeanMan00]

Mission For Fishing bless you

[@altus8312]

Do you have a link to those pliers?

[@MissionForFishing]

I bought them when they were discontinued at my local hardware store, but I’ll look around the internet and see what I can find.

[@altus8312]

@@MissionForFishing Thank you!

[@MissionForFishing]

These are the EXACT pliers I have and It looks like there are a few left and shipping is available. I like them a lot and have had good luck with them but I'd recommend just like with every tool that gets wet to oil the hinge or it will rust in a few years. (flashlight is a nice added bonus too) www.menards.com/main/tools/hand-tools/pliers-plier-sets/guidesman-fishing-pliers-and-flashlight-combo/2433090/p-1444436619918.htm

[@altus8312]

@@MissionForFishing You are a LEGEND! Thank you!

[@ryanbraga5666]

What kind of dry box is that? Like can you send the link or name Of it?

[@MissionForFishing]

Yes, this is an associate link from my most recent upload: amzn.to/3dBTuKp

[@kylegoblirsch1092]

Sick vid!

[@andrewconover4059]

hopefully

[@mr.shadestrains6033]

:-)

[@Isiahlee0418]

Its milk not MELK

[@MissionForFishing]

Yup