Light It Up | 1962 Chevy C10 Patina Shop Truck | Turnin Rust Episode 6

🔥If you enjoyed the video, smash the like & subscribe button!🔥
Next on Turnin Rust, Lance receives word to the where abouts of 3 possible vehicles. Being left behind with lots of memories, a family decides its time to turn loose of their late fathers resting rides in hopes to see them on the road again.
While closing the deal, they find out some ignited information that would lead up to a living legacy for “Fireball Floyd”
Directing their attention to revive the heartbeat of the 62 fleetside c10, rubber hits the road as this 500 big block Cadillac roars again.
And what says Cadillac more than the king of all fins! Between busted knuckles and bad timing, heavenly gears align with the purchase of a highly sought after 59 Cadillac.
Back at the shop, things get heated as they alter the attitude on this one of a kind ruckus raising shop truck. After all, nothing screams fab shop more than a fireball breathing hot rod!
Follow along as the guys press through obstacles and dilemmas in hopes to honor the former passions of Fireball Floyd. Giving hope to another while serving God and building rods, here at Turnin Rust.
This ones for you Floyd!
LIGHT IT UP!!! 🔥🔥🔥
►►Huge shout out to MAXXD Trailers for hooking us up with a 8" Power Equipment Trailer (T8X) to make loading our picks a breeze, it literally takes us no time with the power tilt to just hook the vehicles up and take them home! You can see the full details on this trailer at - goo.gl/WfW7qk
► Subscribe to us on KZbin:
www.youtube.co...
► Instagram: / turninrust
► Twitter: / turninrust
►Merch: www.turninrust...

[@stevenfoust1979]

This is what happen when you get a hard working, god lovin, country boy doing what he does best. Great job guys, love the the truck The show production was better than some million dollar movies I have seen So GREAT JOB !!!!!

[@joevillareal191]

Glad You kept the double headlights, & didn't change them to single like you said... 👊✌

[@GMTabone]

God Bless you Guys, Lance you are one gifted man...Love your show, I'd love to see you do an old 62 Volvo beast, Your background music kills the roaring sound of the V8, kick it down a notch, I found I have to turn down the volume every time it comes on...Great Show I love what you guys do...Praise the Lord...and keep on Turnin Rust.

[@scrapguy6816]

I was born in 1962. Have a cool old truck like that would be nice. Keep up the good work brother.

[@TurninRust]

Thank you to EVERYONE that hung around for the premiere, and suffered through the 360p! I thought it would have changed over to 1080p on its own, oh well lesson learned! We appreciate each and everyone of you, We cant wait to show you our build for LoneStar Throwdown 2019!!

[@Low_04]

Are yall going to Turkey Drag in Lone Oak, Texas in December

[@brandi4560]

really enjoy your show, im local from Tyler. Can I suggest 1 thing ? I really wanted to hear the flowmasters once they were installed but its drowned out from the music playing. Keep it up, great show !

[@lancethelocal]

Driving to LST from Maryland! My buddy and gotta finish up our two trucks to make the road trip!

[@JosephDR]

Hey, I live in Conroe. I'll see you here!

[@malikdigger4544]

That 62 came out sweet awesome job u guys do.

[@TateReggie]

I love that someone besides me understand and love patina. Thanks for sharing your projects. God bless!

[@aaronhillyer1]

A nice tribute to the family. God bless.

[@MariaCruz-mn2nb]

Beautiful!!!! I learned how to drive on a 63 c10. Straight 6 three on the tree

[@ericcurtis8824]

I appreciate the work you guys do and what you stand for personally. Keep it up! God Bless Turnin' Rust!

[@megamannn8527]

👍🤗 turnin rust 🤗👍 😁thanks for sharing your passion hard work and Honoring the fallen 😁 😲Families United 😲

[@ericruiz2174]

Hey Congratulations on this amazing episode. Mega LIKE for all the team! Thanks for bring all those pieces of history back to like. For sure you will find new homes for all of them. Eric Ruiz from Puerto Rico.

[@TurninRust]

Thanks Eric! We’ve just about got your truck wrapped up for you!

[@mrgitarman]

This truck is a lot like my neighbor friend's truck from my high school years. I would love to have one especially with that engine. For my taste I would do everything mechanical but different cosmetically. I liked the original color and wheels. The lights and flame not priority but I appreciate doing what the owner really wants. You make great videos. I will keep watching. Other vehicles my cool neighbor had included a custom 1947 VW bug, a fast dragster '70 Camaro called Fire and Ice (blue fade to red color) and a serious drag boat which I actually drove once.

[@chefnick7685]

You & your Dad do good work & commentary!!! I hope you cleen the engine & compartmen up also. Have a Rusty Rockin Day!!! ©

[@michaelguinn5736]

While serving God & building rods...couldn't have a better statement than that!!! God Bless you guy's!!

[@stephenmitchell3569]

Christian Hot Rodders Awesome 👍🏻😇 😇!!! Sub and great video!!!

[@sweetwilliam61841]

Fantastic job on this truck...love the way it turned out...I can see Dad now......smiling

[@darrellgoldsmith4638]

Awesome Awesome Awesome!!! God bless. I want to say one more time Awesome 👏👏👏👏

[@johnhodg8400]

I totally love these old trucks. !!!

[@carlosbishig1]

Excellent video and hello from Puerto Rico 🇵🇷 guys

[@edc6333]

Ive had a 66 chevy short bed fleet side many years, but only with 2 head lights, I love the look of the grill with 4.

[@brianwellmon6222]

That is a great looking truck love what yall done to it.

[@TheWalkmanRotation]

Seeing some skateboard influence here. That Spitfire Wheels character with the American Flag.

[@timkiwi]

great show, cool photography. it so refreshing to see one of these car restoration shows where there are no loud mouths with big egos. well done guys.

[@petersmith7001]

My thought exactly, well put!!

[@christianjule4615]

I agree. No anger no yelling no gossip and hate. Just great work healthy interactions tons of respect and a good strong love of God. Makes for a Perfect Show in my eyes. Keep it up Lance!

[@brucewayne9483]

Try again. They do not restore anything..!!!!!

[@Freediver1976]

Maybe the only Channel who turns Gold into Rust excellent work guys .

[@davekauffman8727]

I agree 100% that God should have the glory, amen my brothers, but I have a different opinion about the stance of a truck. Lowering a truck and putting forklift tires on it is NOT my idea of cool, I would've given it 4-wheel drive, lifted it, and put bigger feet on it. A truck should not fear speed-bumps or mud ;-)

[@quickdeuce]

You're for sure entitled to your opinion Dave but mine is 180 out from yours,, I LUV the lowered stance. Speed bumps? No prob,, just find another way into that parking lot or go someplace else,, simple enough. I had a LOW '63 Chevy II and at a few shows had to stack little blocks of wood to get over speed bumps but we got 'er dun. That was a long time ago,, now days guys just use bags,, blow ;em up and drive over the bumps then drop their hotrod back to Mother Earth and look cewl :).

[@shaunarneil586]

Hi am shaun😜

[@timdorrough1233]

Lift factory 4x4s lower factory 2wd trucks. Only good opinion haha

[@timpickard2726]

Great Job on the truck!! I'm sure Floyd Loves it too!!

[@demondestroyer1080]

HOT DIGGITY DOG !!! Been waitin' on you guys..

[@galaxymusicplus3078]

Turnin Rust THANKS FOR SHARING YOUR VIDEO (GALAXY MUSICPLUS) 💕💖THANKS AGAIN 💖💕

[@joshuabledsoe5154]

love the show guys ! great job on fireball floyd love it ! SUBD

[@ADVJason]

I LOVE that truck. I find myself more and more liking that rusty look. But you said you were going with single light in the front and I am so glad you didn't. That dual light thing just looks amazing to me. I am hoping to one day find a 58 or 59 GMC I can bring back to life. One day hopefully.

[@thomaspollock4274]

Really enjoyed the last episode and am envious on the quality projects you turn up. Kudos for paying tribute to the family on the 1962 C10 build.

[@docbryn]

The. Exhaust block is magic

[@f2.8vidz4]

How did the ‘46 catch fire❓ My daddy never used a fuel pressure gauge ..he cut a nick in the fuel line if the fuel shot up over the fender the pressure was fine.... 😂😂😂😂😂😂😂😂😂😂😂 Awesome video Cheers from HudsonBay Ontario Canada 🇨🇦

[@luismarichal13]

Love old cars & trucks!😊😊😊😊😊😊😅😅😅😅😅😅

[@tino0217]

'"SERVING GOD AND BUILDING RODS" AMEN

[@robertkilburn4966]

Can. I buy the caddy how much I love the show IAM Robert tell me how much 9312093497 [e-mail]

[@brucewayne9483]

@@robertkilburn4966 they wont sell you SHIT..!!!!!!.

[@williamcap2236]

Love that AMC Pacer i see in these vids ❤anything American Motors !!

[@billnalder1017]

I love that 62!!! Great job guys love your channel!

[@dimefever1006]

That's what I like about Texas! Good trucks everywhere, decent prices can't go wrong!

[@michaelyoho4848]

What an awesome video guys. I love how you keep it simple and low budget for us average hard working Americans that can't afford the $50k build jobs that most of the other channels do. I greatly appreciate the instructions and advice you give while working on the vehicles along with showing your christian beliefs. This is the first video of yours that I have watched but it sure will not be my last as I look forward to seeing a lot more from you. I also want to thank your sponsor MAXXD trailers, they look like great trailers and I want one. Keep up the great work on these ole' rides and please keep making many more videos.

[@michaelcuff5780]

That 62 chevy would be a hell of a lotta fun with a Duramax and a hot tune in it!

[@bigtank50]

i love your videos its just too much music!!!!!!

[@ashtenmark5019]

Yep

[@Animalmawds]

Agreed, I thought I was listening to to the "Roadhouse" sound track. I was waiting for Patrick Swayze to show up. Plus the editing could use a little help. Timelapse the trailer loading or edit it way down. Dosen't need to be 15 minutes worth of trailer loading. Other than that great video and fabulous workmanship.

[@AJ-ut3ul]

Wow, the intro narration really lays it on thick.

[@DJTAZ1996]

Great truck but thought at end y'all may have showed old owner what truck looked like

[@armandopatane5343]

I’m so glad you can work with your dad / i never met my dad but I know cars his loss

[@stevebrowne4111]

Great video, awesome job on the Truck, my only gripe is the music, I'm on the volume up down up down...

[@rabelanisedrick9962]

Guys watch your channel from south Africa, your doing the best you make me feel in love with vintage 😊😊

[@Hope-ko7hv]

Love the end result, the truck looked bad ass and that was nice of you guys to dedicate the build to the previous owner. Nice story

[@ArniethePirate]

If it wasn't for the anthem music, I would keep watching more vids. Had to stop half way through Light it Up unfortunately. Your a good speaker, and I like it when your Dad steps in to talk too for sure.

[@ibiscar06]

Ouch, I love the build, but it hurt me to see a hole drilled to the side of the bed...

[@johnwebber3943]

Hey Lance, I want you and your dad to know how much I, and so many other people, enjoy your channel. Great work, keep em' coming, and thanks for sharing your picking and patina builds with us. I'm writing to ask you to share with us the re-build on the 46 Chevy truck you bought from Deany Hall, and is now your dad's to work on. I'd like to see a complete series of episodes showing him working on it and you assisting him. I'm sure it would get a lot of views and likes. No doubt that 46 will be a great ride. I'm also going to suggest that you concentrate on finding and selling more old truck that most guys are looking for. From your inventory, I don't think a lot of us of interested in the buses, old tow trucks, and step vans. Just a few thoughts and suggestions for you ponder. Take care and God bless!

[@jacqueslecerf2424]

It was at about the 35 minute mark when I decided this 123 min episode would only be about 35 minutes if they cut out the slow motion scenes. I love the content of the show and the projects....but how much slo-mo is really necessary?

[@AmericanRelic]

My new favourite YT channel. It's cool how you guys show the detail in much of the work that your'e doing. This should be on Discovery.

[@TurninRust]

Appreciate the kind words! :). Thanks for the support!

[@2H80vids]

I disagree. The quality and content is certainly good enough for t.v. but, at least on KZbin you can skip the ads. This video would be made into five or six padded-out 40 minute Discovery episodes, constantly repeating footage and, somehow, there would have to be a deadline. The guys would end up having to "pull all-nighters" and arguing amongst themselves. The laid-back style is what makes this such a watchable channel. Please just keep it on KZbin,☺ Cheers, Dougie.

[@TheRocketbob22]

MASS produce, start a company. Open a dealership MOGA... make old great again.

[@haroldrogers6083]

Very sharp looking truck , i think Mr.Hall would approve if not want to buy it back . Keep up the great work , God Bless Y'all !!

[@rgbigdog]

Your truck needs a Detroit Locker for that rear end.

[@TBConl]

So happy I found this channel. Love this stuff. I wished you would have taken it back to Floyd's family so they could see it.

[@sinistermalmente]

I like the production value of the new shows. Very well done. The cars speak for themselves.

[@TheMikielopez]

Boy Howdy! You boys hit the ball outta the Park! Dang fine job indeed!

[@five0pd310]

Truck looks great. I know there's a market for the patina finishes and on most of your shows it's awesome. This truck, though, I sure liked it a lot before it "turned rust" ...lol. Regardless, that's a mean machine. Another job well done. Keep it up. I'm liking your channel a lot. Good to see fellow NE Texans doin' good.

[@projectzip]

I love that third truck with the newer bed. Its an oddball that I think works. 😀👍🏻

[@NeilHesterSkateboarding]

You guys know that's a spitfire skateboards logo you put next to the exhaust outlet 😁

[@raykemry954]

Looks kinda like Wilson to me .lol

[@HeadNtheClouds]

I was wondering if he was a skater. I skate, 🤘☠️🤠😎

[@acemeriel]

God bless you guys, fantastic duo.

[@EsotericArctos]

I've been quietly watching all the videos recently. Agree with @Jeffrey Hall, you guys should get a networked show. What you do is pretty unique and special. Great to see you saving history. I wish we had someone over here in Australia doing similar stuff.

[@AwakeDude911]

no show for them...here in America you can say the generic GOD but not Jesus name !! our tv line up wont include the name jesus so they will never get a show on tv ...maybe a off shoot something but the jesus stuff will need to go as well....people here loose their shit when you say jesus

[@tonys5033]

That is a sweet ride, well done ! I sure miss my 63 short bed fleet side, 4 on the floor Muncie 4 speed transmission , with a 327 corvette engine. Love your video's, keep up the Great work. God Bless !

[@cszalai1]

New fan Lucas. Your content it’s awesome and your camera shots are on point keep up the awesome work. Shout out from Detroit ,The good ole motor city.

[@southerncountryboy32]

Only thing that I would have added would be to have "In Loving Memory of Floyd "Fireball" Floyd" somewhere. Maybe on the quarter panel between the steer tire and doors below the Chevy badge. Otherwise, it looks great and I'm happy to see y'all did it in his honor nonetheless. Please keep it up!

[@rodfatherschopshop6004]

What is the two part rust system your using? Nice build! Keep up the great work. I love that this is a true hot rod shop, no BS. Your production is excellent!

[@baggedr32mk5]

Superb,i better put the kettle on and settle down for an extended episode 👌🏻

[@slothgaming4076]

In Canada those would have costed you around 12 thousand a piece in that condition. Wish I could get one but it’s too expensive for me since I’m only young...

[@williamknight2263]

Keep the faith brother DREAMS do come true.

[@slothgaming4076]

@@williamknight2263 yes sir! Still waiting for the one!

[@Jeff-1969]

I thoroughly enjoyed this episode, I will catch up with the others. very entertaining ,I also love the fact- for this episode that the ( Hall family) answers a majority of the commenters.. 😁 that's great! it's a full package deal of history and story pertaining to these trucks. just absolutely great 😉👍unique even.

[@davysharp3254]

I'm so glad I found y'alls channel, I love the fact that y'all are proud to announce God and how y'all carry yourselves God bless you and your family

[@robertpearson3109]

All of ya did a Fantastic Job on her! The Ol' truck is lookin' gooood!

[@dennisbryan4070]

You and you're Dad have one of the best KZbin Channels for fixing up rides. Fabulous Job on the Rust Patina Style The Fireball Floyd Theme is Out Of This World

[@brent440]

thank goodness that added rust doesn't effect the left rocker, floor pan, and rear of front fenders where they normally rust out in the rust belt. Looks good tho

[@dcargal]

can I please get the sound track to this video to listen to while i work on my junk

[@hotrodfarmer6308]

This family needs way more subscribers it's far better than a lot of these other guys on utube , editing and content is on point and I love that you're love for god shows on here. Keep up the good builds and great content

[@jamescarey9197]

Beautiful truck, you guys knocked it out of the park, a daily driver that looks like it never stopped

[@chevy15rs11]

I love this truck.You guys killed it as always.My dream car is a 57 Chevy Bel Air red and white with some what of the rust look like this.Now if I could just hit the lottery lol.Keep up these amazing projects and as always God Bless.

[@joshchristian8598]

Great show... love the soundtrack!!! muddy guitars with some noisy drum production... great atmosphere for the images.

[@rexfreelom4300]

That is how the channel show to us. The coil spring came off and you install the pair of low rider coil springs. That would means the original heavy duty helix spring weight heavier. Then new coil suspension absorber is weighted at what weight in term of pounds? These are what the specification - we all want to hear it where you add a pair of small coils. Thank you.

[@TurninRust]

Enjoy the episode? We recreated the same patina style onto our stainless steel logos that we put on our hats! You can head over to www.turninrust.com to snatch up a "FireBall" patina hat! 🔥🔥

[@steveshoemaker6347]

Youall just made a super cool MOVIE an a badass truck,thanks so much Steve !!@ S

[@808leks]

I use to drive from OK to Longview for work and I always drove by this shop (see avatar pic, its the bus in front of the shop). I always wanted to stop by and check it out, now I wish I did. You have some good looking projects and cool videos.

[@yannisgouras4482]

Loved the show but cut down on how often your playing music I wanted to hear the exhaust on the 62 but couldn't cause of the music

[@NMCLeanLibrary]

Fantastic episode! You have the formula nailed and your clear mission and vision comes shining through. Muted drama with the old warehouse at the end is perfect. Well done!

[@critstixdarkspear5375]

Favourite episode so far. Doesn’t matter how long you make em. They are never long enough 🙈

[@Avatheskibidiaplphadog]

I need to move to Texas , I swear seems like old trucks are everywhere there ,and guns 😉

[@blackisback74]

I can't believe how cheap you got those for. You have no idea what you would have paid for this one of those in Chicago

[@dwaynea8177]

Love whatcha y'all did to the truck I am sure fireball would approve. Glory to God. Amen.

[@RedEyedPatriot]

5200 bucks...what a friggin deal

[@joshchristian8598]

when he said 6...I was like what???? The chevy was worth that alone.. the other two are free..I know trucks aren't as hot as they were but its still a great deal

[@joshuaavila8317]

That GMC is worth 30k fod the condition

[@robsorgdrager8477]

I almost puked 😳🤪🤢🤮

[@6eightss]

I paid more for 1 66 c10, probably in worse condition too, but I am in Chicago and the market is stupid up here

[@justinhamilton9]

No shit!, 5200 each isn't bad let alone all three.

[@cmdr_stretchedguy]

If I had the time and money I would be picking up a 61-63 Chevy truck just like that one, I absolutely love those trucks and the styling, especially the double headlight setup.... Personally for power I would be swapping in a 4.8/5.3L mid 2000s truck engine (for reliability) and 3.73 limited slip rear.... Oh and I cringed when I saw him cut a hole in that original short bed, please keep these trucks close to original metal as possible. The engine had already been swapped so another swap is no big deal. I understand the desire to make money, but there are so few of these classic trucks around that I would want to keep as many here (in the US) as possible instead of shipping them overseas.

[@ericanderson1858]

Wasn't really sure this was going to end well...but ya'll NAILED IT!!! Great truck, budget built and i reaallllyyyyy love the patina. Wow....to God be the glory fo sho! Subscribed...

[@jorgenegrete1366]

Have to say very very nice show! Here in California that 62 would have gone or five or six grand by itself. Same with that GMC. You got a smoking deal.

[@scottievee7467]

No antics. No drama. All about the build. Love it!! I'm a fan. Great work.

[@robsorgdrager8477]

Good show fellers 😉 will be watching more.

[@ChrisBigWizzardWelch]

I absolutely love what y'all are doing, keep it up! just found this series and can't stop watching👍👍

[@bryanyoung7228]

I watched a couple of your episodes and it seems like you have one awesome dad

[@dangerousfreedom4965]

What are you using to get the fake rust look?

[@jimcorman5842]

Great vid I am also interested in your rust method thanks again

[@edifice82]

same here

[@moebz]

Absolutely beautiful work guys

[@BoomerangC10]

What is that rust chemical that you’re putting on it?!

[@hotjohnnyb77]

Thanks guys for making such a long video you guys are awesome and God bless you

[@danhard8440]

your shirt says 1 more car but you bought 3 trucks haa haaa

[@workingmansrestorations7071]

Awsome way to weld from inside. I dont do much exhaust welding, actually any i will admit too... But i have a couple projects I am working on i need exhaust on and i will weld from inside where I can

[@FireItUpGarage]

Great Build! The paint job portion was great to watch. Thanks for sharing such great video!