This video never gets old for me! I simply love how easy you explain things! I'm doing this same install but with a mod that makes the lights turn on when the tailgate opens, only if it's dark enough! Tried this a few months ago but unfortunately the lights shorted as they weren't fully waterproof. lol Keep up the great content Jesse, you inspire people like me!
@BotasNegras104 жыл бұрын
" Now you wanna go ahead " x 1000
@TexaSteven5 жыл бұрын
Hey Jesse, you should be able to cut those strips in between the led lights to the length you need. Those led lights usually come in big bales from China so they are made for you to cut it the length you want. Watch a video by Trailrecon where he made something very similar for his back rear window of his Jeep. You just need to use the electrical tape to clean up the end you cut to kestrel out. Planning on using this on mod on my truck as well.
@JesseRizo5 жыл бұрын
I had asked my source at auxbeam they recommended not to do that that’s y I didn’t even mention it but I believe u can but to me it’s fine there functional so I didn’t even mind that little part thanks though my friend :)
@thepnwtest21245 жыл бұрын
bro this is why I need to live close to you so I can chill with you and mod my truck
@JesseRizo5 жыл бұрын
Not gna lie that would be dope 😎 I’d be down!!
@JustACarGuyNamedTom5 жыл бұрын
That will be great on the trails at night for sure! Great install video!
@JesseRizo5 жыл бұрын
Heck yea I went camping last week and it worked out great when setting up my tent lol!! Thank you 🤙
@BitsofRealPanther5 жыл бұрын
Thank you for making it by my channel, Jesse Rizo! Showing you some love with a _full play_ and a big like from Bits of Real Panther! May your day be the best one ever, friend!
@GTRWendy5 жыл бұрын
Great video jesse! You're taking off now just like sarah! This is just the beginning for you! Congrats
@JesseRizo5 жыл бұрын
My good friend Wendy :)!!!! Thank you 😁😁🤞😁, have u talk to her lately? , her channels huge now :0
@GTRWendy5 жыл бұрын
@@JesseRizo not much. She's on the grind! So happy for her!
@JesseRizo5 жыл бұрын
I’m with you on that Wendy :)
@brett16185 жыл бұрын
“Super simple” Jessie rizo
@JesseRizo5 жыл бұрын
Lol
@Ruiz5625 жыл бұрын
Truck looks really good with those lights. Great job. It does look "super simple." Amazing job with the step by step my friend. 🤙🏻😁
@JesseRizo5 жыл бұрын
Thanks Danny :)!! I appreciate you my friend 🤙
@tiffanynicolegwyn5 жыл бұрын
Geez u are so smart and talented! This looks cool!
@JesseRizo5 жыл бұрын
Thank you :)!!! Something different lol!!
@TheOventura Жыл бұрын
Thanks bro. Just followed your video, easy install.
@PracticalPat5 жыл бұрын
Jesus man this is one long video but regardless very informative and creative af. That bed lighting could actually be pretty handy when working at night or late and you're haling maybe wood and stuff on the back or maybe even for a late night truck party. Anyways good installation video jesse keep it up man! :)
@JesseRizo5 жыл бұрын
I’m thinking a night truck party 😎🤙 lol jk!!! Thanks bro :)!!!
@Mandydaylinmarie5 жыл бұрын
Dude where the hell have I been, almost 5k?!? That's insane, congrats my friend that's awesome! And cool lights of course😀
@JesseRizo5 жыл бұрын
U tell me :0 lol!!! U been mia lol, thanks for still sticking around 😁😁😁😁
@annagrzelcz5 жыл бұрын
Looks super luxurious!
@JesseRizo5 жыл бұрын
Thank you :)!!
@Jmetal7975 жыл бұрын
Bro that bed looks sick lit up...ive never seen that around where im from. Awesome tutorial
@JesseRizo5 жыл бұрын
It’s different that’s forsure lol thanks my friend
@Jmetal7975 жыл бұрын
@@JesseRizo np brother
@ToshShorts5 жыл бұрын
Aye you are the king of car installs! Happy holidays and dipping over to give this gem a full view. Hope you are doing great:)
@JesseRizo5 жыл бұрын
Thanks tosh 😁😁😁
@ttss57263 жыл бұрын
Hardly a king would have done it correctly..... let’s call this what it is the ghetto install
@jpconga55 жыл бұрын
Jesse i like your videos. I have 2 of those white light that you have on the floor in my bed and is enough light for me just change batteries when is time.
@JesseRizo5 жыл бұрын
Thanks my friend :)!!!, that’s true that’s a good light source as well I got those at harbor freight lol
@timfrancis67745 жыл бұрын
do you need a bigger battery amp wise? cause with all those lights would hate to go out to truck and it not start or something. awesome video as always
@JesseRizo5 жыл бұрын
No should be fine I’m not ever really running the lights and the times that Iam I have the car on, thanks Tim :)!
@bolton93905 жыл бұрын
Siiick install I never thought about it.
@JesseRizo5 жыл бұрын
Just something a little different lol thanks for watching
@tonyv15055 жыл бұрын
I have a question, can you connect it to the rear lights so they light up when you turn your headlights on? also maybe add a on/off switch on the wire next to the led lights so you have the option of driving with it on or off
@JesseRizo5 жыл бұрын
I wouldn’t doubt it I’ve seen a similar install like that before just you will have to do some splicing I didn’t really want to cut into the wires lol but I’m sure u can 👍
@letsfindout65875 жыл бұрын
Do a video on tunel cover next! A good budget one. Cool videos!
@JesseRizo5 жыл бұрын
I will look for one thanks 👍
@javis18735 жыл бұрын
Keep up the good work jessee, truck looking amazing and this mod will sure be useful.
@JesseRizo5 жыл бұрын
Thanks my friend :)!!! Trying my best
@BotoRash2 жыл бұрын
Me: damn this is a good channel, I need to subscribe. Also me: *looks down* oh shit I’m already subscribed. If I could subscribe twice I would. Five thumbs up!
@EEDLC5 жыл бұрын
Jesse “go ahead and” Rizzo
@JesseRizo5 жыл бұрын
🤙
@ferretapocalypse5 жыл бұрын
Damn it. Now I can’t unhear it
@kevin2jzzzz2033 жыл бұрын
Nice install brother why didn’t you put your switch in the bed of the truck ?
@JesseRizo3 жыл бұрын
i didnt know how waterproof that switch would be
@Goose_07_185 жыл бұрын
Jesse ‘like I said’ Rizzo
@JesseRizo5 жыл бұрын
😁
@Goose_07_185 жыл бұрын
Jesse Rizo love your content bro! Keep it up!
@juancarlosaponte5 жыл бұрын
Jesse! Well done vid/tutorial bro. It looks awesome. Keep up the good work!
@JesseRizo5 жыл бұрын
Thanks my good friend :)!!
@slowlaneAZ5 жыл бұрын
You should modify this mod to wire up to the cargo light switch. Would be informational for me......uh I mean everyone.
@JesseRizo5 жыл бұрын
Thanks for the idea 👍
@jimmy1967915 жыл бұрын
That looks like a doorbell switch 👍
@JesseRizo5 жыл бұрын
Lmfao true
@AllthingsStyledbyPam5 жыл бұрын
Hi Jesse!!! Wow!!!! I love how it looks at night yessss!!!! I got my snacks so I’m ready for this video lololol!!! I agree it’s not that hard adding or extending the wire because I’ve seen that done before!!! I love how you explain each process of the wiring and splicing!!! Gotta you don’t tape together but separately!!! That’s cool using the wiring cover!!! Black with black and red with the red!!! I definitely agree after all the hard work you don’t want water getting on the wires!!! I loved how you use a clothes hanger!!! Ooh that’s what you did with the harness!!! I love the repetitive of you saying not to tape the wires together and will cause a shortage!!! Sometimes you got to because will do exactly the opposite of what you said not to do!!! Lolol!!! I stayed the end of course to see the difference!!! The LED lights are definitely on point Jesse!!! You are soo talented!!!! I loved your video!!!!! Xoxo Pam 💝💖💖💗
@JesseRizo5 жыл бұрын
Lol thank you so much Pam :)!!!this defenitly was a little longer to install lol
@johnblue36745 жыл бұрын
Great job Jesse!
@JesseRizo5 жыл бұрын
Thanks my friend :)!!
@rshinn87762 жыл бұрын
You can cut off the extra LEDs. There are lines on the strip on where you can cut.
@nvidiasniper4 жыл бұрын
Your video installation is done in detail very informative too.
@JesseRizo4 жыл бұрын
Thank you
@paulcasserly89185 жыл бұрын
Hey, Jesse, I meant to ask... What are you using for a phone mount in your Taco? Thanks!
@JesseRizo5 жыл бұрын
Paul Casserly hey my friend I’m useing the proclip USA phone mount and so far I love the thing it’s a bit on the bulky side but it’s solid here’s a link to the install video i did if u want to check it out kzbin.info/www/bejne/mHLcY3d_jreVf8k
@paulcasserly89185 жыл бұрын
Thanks bro!
@clementesolorzano71315 жыл бұрын
Looks good when lite, however I would have used the appropriate connectors and wire. You could have flipped the led strips to avoid running the wire back under the trim. A little to long for me looks good though!
@JesseRizo5 жыл бұрын
As these are for a 6 and up foot bed you can’t or else it’ll expose a gang of wire :/ lol I tried it off camera and it looked bad, and true about the connectors I still havnt had any problems and it’s been months since I installed them lol thank you :)!!
@00oFAVIANo005 жыл бұрын
Like i said........ always bringing awesome new content.. keep it up 🤙🏼🤙🏼
@JesseRizo5 жыл бұрын
Thanks man :)!!! I Appreciate it 🤙
@TeeLBCify7 ай бұрын
Did you not try to connect it to bed lights?
@bigz77615 жыл бұрын
That look so good bro! Great video!👊🏻
@JesseRizo5 жыл бұрын
Thank you :)!!
@kaohu_f8085 жыл бұрын
Jesse “let’s go ahead and” make a video of the switch getting cut off and hooking on a rocker switch👍 your video helped me out big time with installing mine you made everything “super simple” lol just don’t like the switch look
@JesseRizo5 жыл бұрын
Lol u got it my friend Thanks for watching :)!
@kaohu_f8085 жыл бұрын
Jesse Rizo thankyou bro! Love your tacoma and all the mods it’s super sick! Keep up the videos mah man!
@doyouluvit2 жыл бұрын
lot's of go ahead and's.......great video though
@vinnyvidivici4 жыл бұрын
Jesse “As You Can See” Rizo
@JesseRizo4 жыл бұрын
😂
@vinnyvidivici4 жыл бұрын
Jesse Rizo Haha, keep up the quality content, brother.
@ErnestKwokguitarist5 жыл бұрын
Hi Jesse, terrific job, thanks for sharing this interesting vid...have a fantastic week, my friend 😊
@JesseRizo5 жыл бұрын
Thanks for watching Ernest
@paulquiroz40705 жыл бұрын
How about installing a switch to the tailgate that will work exactly the same as your side door. When you open the tailgate the light will turn on...
@JesseRizo5 жыл бұрын
U could do that it literally is not hard at all, As for this install just was the basic way....
@TheLadyBird5 жыл бұрын
Wonderful video
@JesseRizo5 жыл бұрын
Thank you :)!!
@toxophilite19535 жыл бұрын
Looks great! Question: Couldn’t you put the lights in backwards, instead of tucking in the wires underneath the bed cover & back towards the cabin of the truck just have the tips of the lights toward the back? Or did I miss something?
@JesseRizo5 жыл бұрын
Yes u can the only reason I didn’t was because I didn’t want the two wires to be exposed right in the middle of the truck the way I did it everything is tucked in but yes u can do it that way you would just have to be careful when u use ur bed that u don’t get something caught in those wires
@whiteazn23 жыл бұрын
Do u know if the switch is waterproof?
@bobodean15 жыл бұрын
Great vid...just a bit of constructive criticism. Work on your "up talking". Look it up if you aren't familiar with the term. Almost every phrase you spoke had uptalking. Other than that...good job.
@JesseRizo5 жыл бұрын
Thank you!! Believe me I appreciate constructive cristism thank you and yes I know what it is I’ve been told I do it once in a while it’s a bad habit
@lildapp764 жыл бұрын
Nice video was that speaker wire u used to extend?
@antonioaguilar52945 жыл бұрын
Easy and simple, Dope video bro... hey what kinda extra wire did you use?
@JesseRizo5 жыл бұрын
I just got 16 gauge speaker wire it’s a little thicker then what the wireing from the actual harness is but it works well and I havnt had a issue with it 👌 hope that helps my friend and I got the wire from amazon.com
@Screaminbeamin4 жыл бұрын
Just so ya know, led strip lighting has cut points, you dont need to run it long.
@ttss57263 жыл бұрын
Look at his wiring that’s all you need to know.....
@gamesknrtdrinkz5 жыл бұрын
Nice info and advice bro Like 13👍👌
@JesseRizo5 жыл бұрын
Thank you
@marroquinjonathan885 жыл бұрын
Sick video bro!
@JesseRizo5 жыл бұрын
Thanks bro!!! :)
@sandrashauls58405 жыл бұрын
Awesome tfs!!!
@JesseRizo5 жыл бұрын
Thanks!!
@daflyinhawaiian23 жыл бұрын
He meant to say "Strip" not splice the black and red wires.
@jovannyalmanza245 жыл бұрын
Hey Jesse, i am doing the same installation to my truck. I am wondering the extra wiring you have, what gauge is it?
@JesseRizo5 жыл бұрын
Hey my friend and I believe it was a 16 gauge
@jovannyalmanza245 жыл бұрын
@@JesseRizo thanks bro. Keep up the great work your taco looking great!
@OMGBEKKAG5 жыл бұрын
That's awesome
@JesseRizo5 жыл бұрын
Thank you :)!!!
@xGARFIELDx5625 жыл бұрын
Looks bad ass
@JesseRizo5 жыл бұрын
Thank you 😎!!!
@iplaywithrocksforfun5 жыл бұрын
Hey man is there any conflict between these lights on the battery and a dashcam fuse tapping?
@JesseRizo5 жыл бұрын
I don’t wanna lie I’m not sure but it shouldn’t?
@dannygonzales25284 жыл бұрын
Can U cut the LED strip to fit ...?
@d1gw33d4 жыл бұрын
I've never seen an LED strip you can't cut. A lot of them have actual marks that show you where you can cut them.
@josearchundia19785 жыл бұрын
What year Tacoma do you got?
@JesseRizo5 жыл бұрын
2018 Toyota Tacoma trd off road my friend
@seven4t85 жыл бұрын
What if there are 4 wires
@chicklet4565 жыл бұрын
Cool
@JesseRizo5 жыл бұрын
Thanks
@5150roc4 жыл бұрын
Sorry Bro, but using speaker wire is not a good choice for this type of application.
@codyfox20385 жыл бұрын
"You're gonna go ahead and"
@eugenepaquin50175 ай бұрын
Dude your extra wire you purchased is speaker wire. soon it will fail
@jacksonvang34295 жыл бұрын
Do more nice
@JesseRizo5 жыл бұрын
Thank you!!
@Rrukofall5 жыл бұрын
Hey Jesse..
@JesseRizo5 жыл бұрын
Thanks for watching
@Yettee02014 жыл бұрын
This video is the definition of sloppy work and not thinking out the layout first, and DO NOT USE his method of connecting wires (just twisting and taping wires is a fire waiting to happen). Also that extra wire he's using is speaker wire and isn't rated to be out in the elements like that even with that type of loom covering.
@joejordan58793 жыл бұрын
You talk like your from San Fernando Valley.
@EddieTee3217 ай бұрын
the idea of this is really cool but your installation is super hood/ghetto. A plus for creativity though !
@JesseRizo7 ай бұрын
Yea it’s a old video 🤣🙌
@andrewkrzyzaniak9965 жыл бұрын
Your Engine bay so dirty for
@JesseRizo5 жыл бұрын
Yea from playing in the mud :0
@vi683a Жыл бұрын
A professional will show the After...before!
@JesseRizo Жыл бұрын
I’m not a professional never claimed that, and never have to show before since if u have the truck u can look at yours
@vi683a Жыл бұрын
@@JesseRizo Maybe you misunderstood me or i didn't clarify myself. I apologize. I call you professional, because you showed the end result of your work first, opposed to making us wade through the endless amount of video before we seen the result. Indoctrinate us first with a fine result in order to encapsulate us with the work ethic it took to come to that conclusion. I applaud you wholeheartedly. Most KZbinrs make you wade through the work to show shit results. If you can see i did upvote your video!
@JesseRizo Жыл бұрын
Thank you 🙏 I appreciate you
@jaylogan0125 жыл бұрын
How have you been doing this for 6 years and you’re still this bad...
@armus550b4 жыл бұрын
The fourth "like I said". Made me stop watching
@SophiaScarlet5 жыл бұрын
The lights look so nice and bright! Really cool Jesse :) left a like
@JesseRizo5 жыл бұрын
Thank you Sophia :)!!!!!
@ttss57263 жыл бұрын
This should be title how not to wire..... speaker wire I mean yeah it works but let’s be real use the proper primary wire..... second why cut the connectors off and not use them. I can’t understand why people constant cut them off and never use them, the proper why would have been cut off the connector leave a good 2 inches or so added your wire then use the connector for it’s intended purpose. Third a coat hanger coke on use something that won’t cause damage use a ac and heater 6 foot cable tie. They don’t damage anything and are flexible that they don’t need much room to get thru. Fourth why not use the cavities in the bed to run the wire properly I mean all you have to do is look for where the factory harness goes.fifth runs wire thru a hole that has an edge then sticks the grommet over it pinching the wires... you could have just gone thru the hole in the fire wall again it’s there for a reason. 6th it’s low voltage why are you running it from the battery you could have research and connected it to the pin out on the junction box for a factory look and power. Better yet you could have short cutted and use a add a fuse and connected to the fuse box again not need to run anything from the battery... It’s wiring like this that provides me job security when a car catches fire
@TheLaughingLion5 жыл бұрын
yo man this looks lit! 😸😸 hey real great nstall and I can't believe you did it at night time and the video came out real good. I murdered the like button #96
@JesseRizo5 жыл бұрын
I was worried it wouldn’t be good to be honest lol, thank you :)!!!!
@JesseRizo5 жыл бұрын
P.s another giveaway tomorrow ;) if u want to enter lol
@safreacts5 жыл бұрын
Clicked on this because of that dope thumbnail. I enjoyed this one Jesse, big thumbs up :))
@cpsmonroe13 жыл бұрын
Couldnt I just plug into the factory wiring underneath the dummy caps for the OEM lighting? That way it’s controlled by the factory door switch and also the bed light switch on the dash.
@JesseRizo3 жыл бұрын
technically yes you can
@lvluxdelight5 жыл бұрын
Wow.. You have so much knowledge.. The truck looks AMAZING 😍
@JesseRizo5 жыл бұрын
Thank you :)!!
@Trays79405 жыл бұрын
Ok, loved the video! Great lesson in wiring and pretty well done. Question; why did you run the original led wiring back down the length of the truck bed instead of just running the led strips the opposite direction and having all that wire to run up into the cabin?
@JesseRizo5 жыл бұрын
Thank you, and because the length of the bed led strips is to long for a 5 foot bed so if I would’ve done it the opposite way the ends of the wires coming out of the led stripped would’ve been exposed in the middle of the bed and would not look good at all so flipping it backwards allowed me to hide the wires if u have a 6 foot bed u don’t have to do it this way since these lights are for a 6 foot bed 👍 I hope that helps
@Trays79405 жыл бұрын
Got it!
@erickoechling93074 жыл бұрын
FYI +: Dude, at 11:44 you show the light strip. You can cut 6 of your LED's off at the cut mark and they'll be the right length. Still a good job
@ryanmurphy6945 жыл бұрын
That looks really nice too many wires for me bud lol! Love the idea will probably look for something a little smaller. Any chance they have a OEM style switch for that? I thought that was going to be your third switch for the Cali Raised panel unless I missed what it was
@JesseRizo5 жыл бұрын
It’s pretty bright I tried it out last night and last week on our camping trip lol but yea I agree it is to many wires 😂, no I wish they did I’d have to get one from Cali raised and no I havnt put nothing on it I actually have another light bar for it I just havnt had the time to do it lol
@FreeTimeFeats3 жыл бұрын
Dawg just use an add a fuse to tap the existing bed light switch and it will function when the doors open or switched on, etc
@anthonysanchez97465 жыл бұрын
I was really scared, I'm glad you showed us how to splice wires.
@JesseRizo5 жыл бұрын
Thanks for watching :)
@TWOWHEELFIX5 жыл бұрын
Huge difference Jesse, job well done my friend. I like it. 👍🍻
@JesseRizo5 жыл бұрын
Thank you :)!!!
@KevinLee138 Жыл бұрын
Please do not splice wires like this. Crimp connectors are so cheap and easy to use and make secure connections when done properly. Twisting wires together like that will loosen up over time. If you're going to splice stranded wire like that, do a lineman's splice and apply solder
@hotfiyah3 жыл бұрын
2 yrs later but, couldn't you have tucked some of the lights under the rail covers so you didn't have to have that extra on the back? Just a thought.
@Leatherkid015 жыл бұрын
You should have poke it thru the gromet .... Up to the insulation sleeve ....then pop the gromet back into the body cavity hole. Then silicone around the gromet wire hole.
@JesseRizo5 жыл бұрын
I held off on that for now I’m actually doing a cb install on my truck ;) so that hole ima use to run that wire as well I was going to use silicone once that install is done but great thinking my friend :)!!! Thanks for the tip
@BamagirlAmy5 жыл бұрын
Great job Jesse very helpful video thank u hope u are having a good week
@JesseRizo5 жыл бұрын
Thank you Amy Iam :) hope u r to
@phatrides2220005 жыл бұрын
some brands you can just clip off the extra leds. Not sure if thats all brands.
@ryan676605 жыл бұрын
Great video, looks really sweet! But man.. it hurts my soul to see that nice of a truck so muddy, especially under the hood lol
@JesseRizo5 жыл бұрын
Thanks my friend :)!! And lol I’ll probably stop getting it muddy atleast for a while it hurts me to believe me lol then it’s a pain to clean 😂 but sometimes when I’m out we hit mud spots that’s why :/
@ronbaranchik11604 жыл бұрын
And don't let the connections become wet.
@stevesalcido51355 жыл бұрын
Jesse, another good video and how to! Looking forward to the next one, thanks for sharing.
@JesseRizo5 жыл бұрын
Thanks my friend I appreciate that :)!!
@viralviruzshorts5 жыл бұрын
Nice upload! Keep it up
@JesseRizo5 жыл бұрын
Thank you!!
@jdc19785 жыл бұрын
Not sure about using speaker wire for doing electrical work. Seems sketchy.
@JesseRizo5 жыл бұрын
James Carballo true but getting the correct gauge wire you should be good just not as clean of a install
@510ozy5 жыл бұрын
I can to the comments specifically to see if anyone else also noticed the speaker wire for electrical work lol!
@510ozy5 жыл бұрын
@@JesseRizo you're right though. it'll look cleaner but as long as the gauge is good you'll be fine.
@chrisginoc5 жыл бұрын
@@510ozy Thats how we do it in the hood. Speaker wire ftw.
@CharlesBlack15 жыл бұрын
😱 Think about what you are saying!
@Dr.Offarcs3 жыл бұрын
I just wanna be honest with you.... lol
@mehzabinpinky5 жыл бұрын
Awesome
@JesseRizo5 жыл бұрын
Thank you :)
@hextoxictrev43935 жыл бұрын
Good video bro I enjoyed it 😌😌😌
@JesseRizo5 жыл бұрын
Thanks bro :)
@petrborovy3475 жыл бұрын
Very interesant video
@JesseRizo5 жыл бұрын
Thank you!!
@alaskauntamed64765 жыл бұрын
Looks good and I will be doing this on my tundra
@JesseRizo5 жыл бұрын
Awesome it’ll probably fit a lot better since the bed is bigger, Thanks for watching my friend
@kyledefenbach43635 жыл бұрын
Couple things. First off, thanks for the video, making a video while doing this install can't be easy. I did this install with my ram but didn't use the switch, I wired it straight to my cargo lights so they just come on with my cargo lights. If you want to tie hot wire it, you don't need to run it all the way to your battery, you can connect it to your fuse box. Wiring it to the cargo lights makes it so you don't have to run it into your cab at all and you don't have an ugly aftermarket switch in your cab. Also, less exposure for the wires, I think you're okay here but use a solder. They're cheap and you're use to get a secure and safe connection. Either way, thanks for the video. Lights look great.