Toyota Tacoma Truck Bed Lights Install

Dasbecan LED Truck Bed Light: amzn.to/3hugdg3
These lights are super easy to install and should only take 10-15 minutes of your time. (Link provided below.) The best part is that there is no additional wiring required on your part, the trucks are already pre-wired for this awesome addition. (One that Toyota charges $310 for!)
They put out TONS of bright white LED light and makes your truck look that much nicer.
As always, thanks for tuning in, and if you liked the video please consider subscribing!

[@WesleyAllenNC]

Dasbecan LED Truck Bed Light: amzn.to/3hugdg3

[@leehadley8652]

One of the best add on bed light videos I've seen.

[@WesleyAllenNC]

Thanks!

[@Ottomypall]

I took off 2 screws instead of 3 on the 2023 SR5. Yes super easy to do using OEM Toyota parts.

[@1991toyrolla]

Your videos are clear, direct & no crazy music. Excelently executed! thank you

[@WesleyAllenNC]

Hey thanks for the comment!

[@1991toyrolla]

@@WesleyAllenNC You're welcome!

[@brandx7711]

Your videos are excellent help brother. Just got my 22 yesterday and did the LED interior and license plate swap out, and just finished the bed lighting kit. Made it super simple. Awesome job!!

[@WesleyAllenNC]

Hey thanks! I’m glad the videos are helping

[@notasushifan]

Hello and good morning. I bought these lights off of Amazon and love them. The install process was a piece of cake. Thank you for the video! :)

[@WesleyAllenNC]

Thanks. I’m glad they worked out well for you!

[@sinister184]

I was so disappointed that mine didn't have bed lights. Glad they're just a plug-and-play addition.

[@WesleyAllenNC]

Yes for sure. it’s a super easy install/upgrade

[@reelingwithrocha2830]

Thank you!! Very to the point and super explanatory. Just received these today from Amazon

[@ernestotv2966]

Thanks for the guidance installed mine following your video 👌🏽

[@WesleyAllenNC]

Awesome! I'm glad it helped out

[@richardholappajr.6184]

Nice video, nice upgrade!

[@Vapornator]

Just picked up a pair and will install them this weekend. Get vid, everything was very well explained. It's probably the best vid I've seen on this topic so far. And I've seen a lot. Thanks, brah 🤙!

[@WesleyAllenNC]

Awesome, thank you!

[@derekward2266]

Great informational video! Well done! I’ll be installing these soon!

[@philandrews6300]

Best video on this mod! Thanks!

[@WesleyAllenNC]

Thanks!

[@charlesvickery]

Exactly what I needed, thank you

[@WesleyAllenNC]

Your welcome, I’m glad it helped out!

[@user-ul6jx1yl6g]

Thanks bro well worth the purchase 10min install 💪🏾

[@WesleyAllenNC]

Glad I could help!

[@user-vi2dk1qz5f]

Thanks great video.

[@tim3308]

FYI: This Dasbecan brand of lights crapped out (1 began flashing) on me few months shy of two years (reviews show some of the same results) - and that was under a camper shell. You can find OEM lights for around $60

[@stevecaldwell8576]

Nice grill

[@WesleyAllenNC]

Thanks! I have another video on how I painted it. Super easy

[@TroyFutureExpat]

Hello Wesley. Thanks for the mod tip. I'll definitely try this. I was wondering what that switch was for. Are you monetized now? Congrats if so.

[@WesleyAllenNC]

Thanks Troy! Yeah I hit 1K subscribers on June 9th which was exciting. I’m still trying to figure out the ads and such! My videos have been a bit scattered lately but I try to post when I have something new going on around the house, with the truck, or with vending..

[@JamesReedy]

Too many bolts removed, only need to take out the first and third (starting from the bottom) 10mm bolts. Then the clips, not using them correctly. The body mounted harness clip stays clipped where it was. The other clip on the light harness goes into the rectangular hole just above the hole you passed the bed light harness thru. When you do it this way you see just how tidy it all is.

[@TheTaemobig]

Thank you so much! Can you add caulk to seal it?

[@WesleyAllenNC]

Hey your welcome! I’m sure you could caulk it but I didn’t. Might be worth looking into just to be extra safe..

[@cfsnipa]

I see you have the lights in your grille. I just picked up a 23 and looking for grille lights that are turned on by a toggle switch. Preferred one in the oem slot to the left of the steering wheel. Have you messed with anything like that before?

[@WesleyAllenNC]

I haven’t tried anything like that. I’ve got mine setup to run anytime the truck is turned on. (I also toggle and use the parking lights or running lights with them) whichever they are called

[@josephpizzi7505]

I have 2022 tacoma SR. It has the cutouts but there is no switch in the cab. I think it only works for the higher trim levels.

[@djrave5971]

I have sr5 and I don't the switch either

[@alexzee4564]

Well yeah it's an SR. You'd have to look for something that has a full kit.

[@josephpizzi7505]

@@alexzee4564 where would I find one ?

[@hmgxiongchico]

You sound like Red from “this is the end” James Franco’s movie lol

[@WesleyAllenNC]

Lol! I never watched it. Which one is Red? Isn't that Danny McBride's character from another movie?

[@hmgxiongchico]

@@WesleyAllenNC yup lol thanks for the how to video just got mine done awesome work here

[@WesleyAllenNC]

lol good deal on the install. But that's funny, I actually met him once in Asheville, NC.

[@KhoaDPham-py9ze]

I do not have the switch on and off for the bedlight on the board. Have the two holes on both sides of the bed What do I need to get? Thanks.

[@WesleyAllenNC]

Hmm, is yours an SR base model?

[@bigjim290]

I have 2021 tacoma SX I have the cut outs in the bed but I only have a brake light on top of the cab. Is this model also prewired?

[@WesleyAllenNC]

I’m Sure it it. Those little cutouts pop back in easily, wouldn’t hurt to check real quick before ordering..

[@bigjim290]

@@WesleyAllenNC Can I see the wiring from those cut outs without taking the tail light off

[@MyF1Scuderia]

I have the 2021 extra cab trd 4x4 Manual Trans. long bed, basically the same truck as you but not 4 door model, and I do not have the switch either 😕 is that an add on?

[@WesleyAllenNC]

Mine wasn’t added on. There was always a switch there that powers the 3rd brake light as sort of a bed light.

[@blaneahm9891]

How are they holding up for you?

[@WesleyAllenNC]

Still good to go, but I also barely use them

[@fabianmorales691]

good day i got my lights on amazon install they don't turn on. I will need to change a fuse tacoma 2021?

[@WesleyAllenNC]

Dang that sucks. It could be a fuse, but double check all connections. Is your 3rd brake light coming on when you turn the switch?

[@fabianmorales691]

@@WesleyAllenNC IF YOU TURN THE TAILLIGHT ON CONNECT THE LIGHTS DIRECTLY TO THE BATTERY AND IF THEY WORK

[@fabianmorales691]

IT COULD BE A FUSE BUT CHECK AND I BELIEVE ALL WORK

[@fabianmorales691]

@Security Seal WHERE YOU COULD FIND THE DIAGRAM

[@on4acres]

Can you wire these directly to the battery?

[@WesleyAllenNC]

That’s a good question. I don’t see why not. But then again, I’ve never done it myself. May have to wire them in like the Raptor Lights do, from an add-a-fuse adapter into the fuse box..

[@saev55]

I put the same on my truck but they are not working, i don't have power on thw rear harness, but the upper cargo light is working

[@WesleyAllenNC]

What year is you're truck? I'm assuming you have the compatible harness coming from your truck and the 3rd brake light switch is on?

[@saev55]

@@WesleyAllenNC its a 2020, i do have the oem harness and my switch its on, the 3dr brake ligth is working fine but the rear harness its not getting any power, fuse and relay are ok 😔

[@russellmorash3816]

Be careful driving around with white lights facing rearward the cops will pull you over for white light facing backwards.

[@WesleyAllenNC]

True. These lights are almost always off unless you switch them on. They turn on/off with the factory switch for the 3rd brake light 💡

[@jeremystephenson9953]

Now you need to put a boomin system lol

[@WesleyAllenNC]

Lol. Maybe Biden will hit us with a stimulus check.. 💰

[@christophergarcia835]

this DOES NOT work on every Taco! I have 2016 TRD PRO and those access ports DO NOT exist.

[@HottNikkels]

great video but damn that painted grille is ugly!