I've replaced my wall control panel with one that automates the lights and door closing (Chamberlain 041A7327-1) www.chamberlai...
Пікірлер: 19
@tomsteen2492 Жыл бұрын
The screw holes are the same because they are sized to fit a gang box.
@reopat14Ай бұрын
Why do you have two boxes?
@LightsAndButtonsАй бұрын
One for each garage door
@teardropface Жыл бұрын
Most likely the person who installed your control panel and wrapped the wired counter clock wise around the screw was probably a lefty. However the other side was wrapped counter clock wise. Maybe he switched positions. We also had the close door timer feature turned on when we first got our new panel but it got annoying when I was working outside and it kept on closing the door on me when I needed to access tools in the garage. So we turned off that feature even though the time adjustments were available. Great video and like this type of content!
@ATCRyderX5 ай бұрын
Boom. You just saved me the trouble. Thanks!
@apuz132 ай бұрын
Great video. So once you install this new wall control unit you don't need to connect it with the opener via the learn button?
@joaquinsuarez609011 ай бұрын
I like both features of motion detector to turn on light and closing door after 10 minutes, but can you disable both? I leave garage door open for hours.
@LightsAndButtons11 ай бұрын
Yes, the switch labeled "sensor" behind the gray cover controls enabling/disabling the motion sensor and the "hold" button stops the door from auto-closing from the timer.
@joaquinsuarez609011 ай бұрын
@@LightsAndButtonsgreat, thanks. I will check if compatible with my old LiftMaster motor.
@jessem.52029 ай бұрын
What model garage door opener do have?
@jesusfreakster1013 ай бұрын
I hope this is a solution for my issue - thanks you sir
@chrisshinkle72247 ай бұрын
Good video, and very helpful. I am interested in doing this same thing, but the current wall button is a very simple doorbell-like button, so not sure if it is compatible. I have MyQ, but not sure of the model.
@LightsAndButtons7 ай бұрын
I think yours would also have 2 wires per button, but I would check with the manufacturer to make sure it's compatible. They were pretty quick in responding when I asked
@LightsAndButtons7 ай бұрын
Good luck with the upgrade!
@kastsports352810 ай бұрын
This was a well done video. Thanks.
@manjeetsg11 ай бұрын
Hi thanks for the information video.. is this can work with alexa or google ?
@LightsAndButtons11 ай бұрын
Hi, there is a wifi-enabled component but we're not utilizing it, so I'm not sure