Lightweight foam concrete blocks production process

[@gregwarner3753]

How about casting blocks shaped like basic Leggo blocks so a structure could be snapped together. If this process costs more to make then charge more. These blocks assembled into a wall would still be less expensive than conventional concrete walls.

[@chrisl7608]

kzbin.info/www/bejne/g3que3pjnrJ-rbs

[@Andy-mt2gb]

Hi, dear friends, we produce aluminum paste for AAC block. If you need our product, please contact me.

[@edm9468]

Thank you for the video. -What density and compressive strength do you usually make them? -What is the "R-Value" ? -How much curing time it needs to be able to cut? Kind regards.

[@stretchceilingsDubai]

Usually we produce 600 kg/m3. Compressive strength for such density is around 2 MPA. R value for 200 mm thickness is around 1,9. After 5-7 days they have enough strength to be applied.

[@mattbright8635]

Wow an amazing idea for building 👍🏼

[@sooner5484]

Thank you. Awesome. Try to keep out of the rain 😃 what the hell are Pop tarts ! Love it. Cheers.

[@jm-lz8dq]

Excelente maquinaria. Cuánto cuestan las máquinas ?

[@ahmad_almomni]

What types of material are used, what are the quantities, and is it previously approved for specifications and measurements?

[@richardadasiak8058]

Very interested in saw technology. Is there a vendor for the saw equipment?

[@lutomson3496]

These are gypsum? Not Portland?

[@cruisinginislamabad4402]

Sir can you tell me how to dry it in winter situation

[@dineshchaudhary7054]

Wow..very nice video i am learn more about clc..

[@gooikianseng1]

I am interested to buy your equipment in Thailand

[@stivenum2184]

This block is Марка пінобетону, D 200.300.400.500.600 ...which one is it?

Qual ser o custo para montar esse fábrica em Portugal

[@zakariafarah1101]

I have seen options where producers use fly ash or gypsum instead of sand. What is the pros and cons of using sand and does it affect the density of the final product?

[@stretchceilingsDubai]

Hello Zakaira. You can use whatever available in your market: sand, fly ash, calcium carbonate, dolomite etc. You can achieve required density, compressive strength, thermal conductivity with all of them. Take a look at non autoclaved lightweight aerated concrete technology www.pioner-group.com/concrete

[@Andy-mt2gb]

Hi, dear friends, we produce aluminum paste for AAC block. If you need our product, please contact me.

[@cherylm2C6671]

@@stretchceilingsDubai Thank you for your comment, and for your video. I am interested, and hope we may speak soon. Happy and Safe Holidays for you and yours.

[@manikanthprince270]

How to contact you. Send me cell number

[@vinayakabricks1370]

Cost price secondend

[@billythomas2729]

so touching for an excellent video

[@aliamm3467]

what about the UV for this kind from blocks??

[@milsonazevedo1623]

Meu irmão qual o valor dessa serra bloco

[@JRP3]

Why not make a mold the size of the finished blocks and avoid the cutting steps?

[@stretchceilingsDubai]

It is possible for small production capacity but for 200 m3 daily production it is not feasible

[@JRP3]

@@stretchceilingsDubai Seems as if it would be faster. Divide your existing molds using inner walls in a grid to make the finished block size. Pour it all at once as you do now, then when cured pull the divider grid out and you're left with individual blocks and no cutting.

[@stretchceilingsDubai]

If it would be faster all aac blocks factory across the globe would do like this. What you are suggesting is a manual production and it doesn’t work for big companies. For small companies it does work.

[@JRP3]

@@stretchceilingsDubai I don't think you're getting what I'm saying. It's not a manual process. You'd use the same machine to pour as you do now, and pour it into the same mold, but that mold would have internal dividers the size of the finished blocks you want. After curing you lift out the divider grid, with a machine, and you'd be left with the same number and size blocks that you currently create by sawing. Think about traditional block and brick making, they use a mold to stamp out multiple blocks at once. Since you're working with more of a liquid you would pour into a grid instead of stamping.

[@chriscook1468]

@@JRP3 I get it. You are correct.. I have seen tubes replaced and pulled before final set to generate hollow cores.

[@armkf2343]

My work in below work Thank u admin

[@SherrickDuncan]

Hi there. A question. Can I use floating concrete blocks to make a solid stone Mobile Floating Private Island if I put pond liner tarp on top of the floating concrete blocks? And then put compost and soil and grass and bushes and trees etc on top of the tarp.. And then put houses on top of this synthetic but natural looking mobile floating island and then released herbivores and insectivores (sheep / goats / rabbits / chickens / turkeys etc) to mow - brush hog and weed wack the lawns? Could I use your product to make a mobile floating island in this way that would hold the weight of a house and soil and life in general like a regular natural non floating non mobile island does? Then can I anchor it like a boat? This is what the Peruvian Uro People of Lake Titicaca have done for thousands of years with a cork like Reed root that floats. But it rots after the Island has floated for 35 years and must be replaced. And Richart Sowa has done this using floating plastic water bottles in nets with pallets tarps and soil on top. Can I use your product to make a modern permanent version of this?

[@stretchceilingsDubai]

May be if use some special additives it is possible

[@ismailsorba]

is it okay if i don't use skeleton with this blocks? can it take loads? for one storey tiny house?

[@stretchceilingsDubai]

It depends on density (compressive strength), with 600 kg/m3 density and compressive strength around 2.5 MPA yes you can make 1 store house without skeleton

[@ismailsorba]

Thank you!@@stretchceilingsDubai

[@สุจิตฺโตภิกขุ-buddhistchanel]

Why use a saw blade to cut? To make cement blocks. It will make the surface of the cement block. Like a marble surface?

[@stretchceilingsDubai]

this is a special saw. The surface will be fine for adhesive and plaster.

[@1MauricioGarcia]

Good Day and nice video! A Question: a steel wire mesh is not needed for this type of blocks? Even if they became 800 mm width and 2100 mm height and thickness of 120 mm? Thanks in advance. Regards!

[@stretchceilingsDubai]

I think you mean Aerated Autoclaved Concrete reinforced wall / floor panels. If yes so no need wire mesh

[@1MauricioGarcia]

@@stretchceilingsDubai Very Kind of You! Regards from Mexico!

[@lhmawitea3848]

It may so good 👍🏻👍🏻

[@amethysturanus6351]

BEAUTIFUL VIDEO SIR

[@stretchceilingsDubai]

👍

[@zizimai7568]

The super porous cement foam blocks will soak up water like a sponge. Not suitable for wet areas & frequent rain.

[@stretchceilingsDubai]

Non autoclaved lightweight aerated concrete blocks (not foam concrete) widely using in Russia. Believe it is not hot country

[@suranto226]

Cara mlaster biar ngak ngepruk bahan 2 nya herbel gagal diplasteran makasih infonya

[@Krams_Craft12]

I am trying to set up

[@stretchceilingsDubai]

Good.. Here you can find some more details www.pioner-group.com/concrete

[@gesfsa]

Curing time? If the answer is affirmative, how many days is it with water?

[@stretchceilingsDubai]

Curing time is 28 days

[@gesfsa]

@@stretchceilingsDubaiOkay. I hope you understand me, I don't know English, Here in Mexico a normal concrete is 15 days to cure (slab), after 15 days the formwork can be removed, for other types of concrete it is 7 days. I am a pioneer when it comes to lightweight concrete, I like this technology.

[@stretchceilingsDubai]

@@gesfsa Hello Francisco! It depends on the whether. In the UAE we can send blocks to the construction site after 10 - 14 days after production because they are strong enough till that time. Also we have business proposal for clients located outside of the UAE www.pioner-group.com/about/new-business-startup/

[@md.tuifiqulislambhuiyan4629]

I need to know what is clc

[@stretchceilingsDubai]

Cellular lightweight concrete

[@ErBashirBhat]

What is cost per com of finished block?

[@stretchceilingsDubai]

In different countries cost is different because of raw materials and labor cost

[@lalagfoamcretelightweightk4600]

Sand cement silica stone powder fly ash khaki marble powder foaming agent lightweight concrete block making resho

[@stretchceilingsDubai]

Good day Abdul. Just trying to understand your comment. Are you asking something or what?

[@lalagfoamcretelightweightk4600]

​@@stretchceilingsDubai 300 letere how many qubic meter and 24x12x6 inch block psi block and dencity psi plese send the question and sand cement silika sand stone powder fly ash khaka marble powder resho 50 kg bag send plese details and chemeicel and mashenri abdulwaheedkhalid00gmail.com

[@kitchensecretrecipe]

Where is this?

[@westernsellers9148]

Mars

[@rahulreddyfx]

Your company manfacter ...or Clc brickes manufacturer company....Which cost ...

[@stretchceilingsDubai]

we supply production lines for lightweight concrete blocks manufacturing

[@jaxflRealtor]

Why not just make the finished size so cutting would not be necessary

[@stretchceilingsDubai]

What if you need to produce 6000 blocks with dimensions 600 x 300 x 200 mm every day, can you imagine how much time it will take to cast each block separately?

[@jaxflRealtor]

@@stretchceilingsDubai the larger the mold the more time it takes to pour into it, it equals out and you don’t have to cut saving time and energy, it all depends on your setup.

[@odelasampath5435]

E company ekkada vundhi oka peace cost entha avi ea size purthi adress

[@stretchceilingsDubai]

Good day Odela! You can check in this company www.celloliteblocks.com

[@sowjanya3881]

Do you need them sir ?

[@shintojohn3105]

Ples give me a condact details @@stretchceilingsDubai

[@stretchceilingsDubai]

@@shintojohn3105 www.pioner-group.com/contacts

[@jahangirmandal3160]

Hi

[@abhishekkamboj1800]

Mix design process

[@stretchceilingsDubai]

www.pioner-group.com/concrete

[@nazaxprime]

That text is illegal. 😅

[@zband9016]

Would have been more enjoyable to watch had the cameraman not moved around so much.

[@ИгорьДьяченко-м5б]

Belarus 2021 OAO XOLDINGOVAYA KOMPANIYA ZABUDOVA

[@gmog7857]

It takes years to cut it

[@stretchceilingsDubai]

Interesting point of view. Do you have experience or this is just your thoughts?

[@gmog7857]

@@stretchceilingsDubai This is just a figure of speech, the video you represented with a saw going back and forth gives a bad impression that you have to stand and watch this concrete being cut for a while. It looks like it will take forever to cut.

[@stretchceilingsDubai]

@@gmog7857 got it :-)

[@gmog7857]

@@stretchceilingsDubai How much is the whole manufacturing system cost?

[@stretchceilingsDubai]

@@gmog7857 It depends on the capacity. Starting from 50 K USD and more

[@jahangirmandal3160]

❤❤❤❤❤❤❤

[@michaelpaler2527]

pa avail boss mindanao kami

[@henryvillamar9932]

0