Lincoln Power Mig 210 MP Welder - Review

Get this in a great bundle deal here amzn.to/39lTHS4
This is a review of the new Lincoln Power Mig 210 MP. This is a very coveted welder that it is high demand for the Christmas season. Runs Mig, Tig, Stick, Flux Core, and Aluminum Spool gun. Is it worth buying? Ill let you know in this video.

[@darrenmorin6260]

Hi I got one of thes. It is still one the best welder out there today

[@engjds]

is it still going?

[@dondonaldson1684]

Excellent review, thanks very much Luke!

[@JesseWright68]

So nice that you have a Kobota tractor and not one of those Mahindra pieces of crap.

[@carp3566]

nice video Luke. Just wanted to mention that they do offer foot pedal adapter for this machine and if you get the tig package it will come with every thing you need to connect it to your machine including the pedal. You will have to disassemble your machine to install adapter but the directions are very helpful. I ordered my unit as the tig pack LINK4195-2 which came with the machine but the items for the tig where packaged separate, apparently you can order it by itself. You had a creative why of attaching the tig gun to the machine. Well done.

[@LukeFosburg]

carp Thanks! I wasnt able to order the tig package or else I would have so it looks like I am going to have to find that adapter some how. I hope you are liking yours! Its a nice machine.

[@LukeFosburg]

carp Ok found the adapter on Bakers Welding supplies for $54. Ordered it! Im excited.

[@carp3566]

awesome deal. I haven't done much tig welding other then with a old pulsing unit I got, so look forward to checking some video's on tig welding with this power mig. I have been stocking supplies like varies consumables, gas lens, stubby kits, so I am planning to practices a lot. good luck. have a great new year.

[@brycemelton1]

Good video, very helpful. Now there is a aftermarket tig kit available. The one I'm looking at on Ebay is made by USAWeld, under $400.

[@curtissiwak5349]

Great job of the review, i have a hobart mig 140 which i like but i would like to try stick and tig also, when i get my budget up, i will most likely purchase this model, thank again for the review

[@Allworldsk1]

Those Hobart 140s are so nice. No question. I have one as well. I do have the Power MIG 210 MP as well. Stick and tig with that mostly. 👌🏻

[@hubertrobinson8825]

Seems like to me I'm getting one I'm investing on equipment for aluminum welding got a spool gun already now for the real deal adding a 210mp to complete the set up

[@Deckbuilding]

Hi Luke, great video. You explain it well

[@pidgeiam4979]

Gotcha. Thanks again Luke. Best of luck with it.

[@electrohacker]

thank you for answering my question on whether it will fit on a harbor freight cart

[@terrysibley171]

Nice job. Am considering the purchase of one good to know it's worth the money

[@juanfnmxkn]

I just got one but the stick process is king of rough, I'm thinking my old 7018 rods rated at 90 to 150 amps maybe too much. perhaps the electricity in this old house an the 15amp breaker are weak or my extention cords are a piece of crap.

[@iron-farmer]

Try using bigger rods with more steel in them

[@fergusonhr]

Thanks man, Merry Xmas to you and yours

[@shexdensmore]

Hey, i know that i have asked this question before, but i don't think it was answered. How would you rate this machine today?

[@nothingfree3524]

Another UTUBE channel bought up a point with the 210 . the fan the way it is mounted blows fine dust onto the ciruit board and causes problems with the controls on front panel . Spending that much money on this unit and I'm sure its a great unit but DESIGNING it with this flaw of dust contaminating a major part Like circuit board is something to consider..IF THE INFORMATION DOES HAVE A BASE. I DO HAVE TWO LINCOLN UNITS A 125 AND 180 AND A. 225 STICK FOR REAL HEAVY STUFF. HAD THESE UNITS FOR MANY YEARS WITH NO PROBLEMS WHAT SO EVER !

[@1minibean]

Do you have to go through setting screen every time you turn power on/off ? Or can you have it on your setting / wire speed / amps and just turn it on. ? Thanks

[@pidgeiam4979]

Thanks Luke very imformative. I'm seriously considering getting one of these machines. I'm a little confused about the tig peddle...do you plug it in the front or inside the spool cabinet? If in the front, it's a 4 pin connector verses the usual 7 pin?? Or when you said there's a 3 pin inside the cabinet under a rubber plug?? I'm just a little confused. From what I've used in the past for tig it's a pedal with a 6 pin plug, a ground, your torch with a gas adaptor right at the front of the machine. If you know what I mean. Dose this 210 differ from the standard that much? Great video once again and thanks for goin thru it with is. Merry Christmas and happy new year. Greg Ontario Canada.

[@LukeFosburg]

Greg Sheppard It plugs in inside the cabinet under the drive roller. There is a plastic plug that you have to remove. There is a special adapter that you have to get from lincoln but then it uses there standard 6 pin k870 pedal.

[@RickJamesBish]

I dont want to assume but would think the settings are variable and not tapped ? Is that correct ?

[@jdj62464]

Anyone know which is better the Lincoln Powermig 210 or the new Miller Multimatic 215? Both are priced right at $1700 with their Tig kits. Although Lincoln has a rebate deal on till 07/31/16 for $200 bucks, found a few online dealer are also including a $25 BassPro gift card too, which in my case works out as many there's a BassPro in my town.

[@boricuaarecibo9259]

Great question I would like to know I'm trying to decide between the two

[@motecalevol]

I was hoping you had used it in TIG mode. I'm glad I didn't buy one of those. That TIG pedal adapter you described sounds ridiculous. I'll just stick with my Miller Econotig + my Lincoln MIG machine.

[@jvazquez53]

How do adjust the wire tension? the knob does not have numbers....

[@stensonlindal7929]

very informative! well done!

[@jackrab41]

I'm just getting j to welding and want to get a welder. I've done a lot of research and comparisons and I think this is what I want. I'll do mostly mig on up to 1/4 inch steel and some rig occasionally. I'll be making stuff for my truck/jeep. Do you think this is a good choice

[@LukeFosburg]

Jack Jensen This is the BEST choice for the money!

[@burt24pop]

great great video and review. Just what i was looking for!

[@TheChrismanis1791]

You ran any 6011's in it ? I never seem to have luck with 6010 with these new power systems. Also good tip on that tig rig ran one for two years like that and got my 6g pipe cert that way

[@Rhubarb_All_Things_Garden]

Great video, thanks mate.

[@whitingbuilt]

Can you really spray with it? 24 volts seems like its almost there, but I thought you had to be about 26-27 volts with 90/10 and .035 wire. Are you using smaller diam wire to spray? If so, what size?

[@LukeFosburg]

Drew Whiting Yes it works well with .030 Also you can use .023 if it suits thinner applications better for you. The machine comes with tips for both.

[@whitingbuilt]

Are you really getting it to spray transfer though?

[@LukeFosburg]

I would say it's borderline globular but pretty darn close. On .023 it's spraying for sure

[@marksimmons6589]

GREAT JOB WITH THE VIDEO REVIEW, !!

[@dunnoyolo2238]

have you had any drive roll problems with it using larger rolls ?

[@evanmorath5253]

my question is what is max voltage selection on mig???

[@truck3479]

Can you please demonstrate it welding different guage metals with all three proceses????

[@LukeFosburg]

truck3479 No problem, It will take a little time but I will be glad to get a few videos up!

[@notchcoupeful]

Luke ... Question have u notice that ur drive wire feeder bouncing up and down when feeding wire... Because I notice a video from some one In KZbin that has this issue and saw mine that also does it.. Was wondering if urs doest as well... Thanks....

[@LukeFosburg]

Jaime Perez Do you mean the wire is bouncing or the actual roller? This could be from the WIre spool tension being either too tight or too loose. It has to be set just right.

[@notchcoupeful]

No the roller ... Bouncing.. Their some one in KZbin that posted a video of it and notice mines does it also... Must be normal I guess..

[@rigobertofigueroa1611]

6010 is possible to weld with this machine? and what would happen if I try? I need this type of welding electrode (6010) but did not want to spoil the machine. thanks

[@LukeFosburg]

+Rigoberto Figueroa Yes I run 6010 on this machine all the time. Go for it!

[@rigobertofigueroa1611]

+Luke Fosburg (RC M.D.) I have my machine but I can not weld electrode 6010 as you set up your machine to apply this type of welding?

[@terryjbonnettejr1287]

whats the deal all want is a tig welder i can weld a aluminum coke can to 0.100 aluminum on a flat boat anything else i can do with my mig. please some one tell me whats the deal with the ac/dc. what so dam difficult that you can't tig weld aluminum with these machines.

[@Mati_Ale]

What is the thickest piece of aluminum that the machine can weld?

[@outtatime08]

How does it compare to the ESAB Rebel EMP 215ic? I was looking at the ESAB Rebel but my local welding supply doesn't keep it in stock and suggested the Lincoln 210 MP. Thanks for advice

[@Enonymouse_]

I am finding many retailers don't stock many of the Esab's, the better/higher end esab welders are not sold by lot of places. I'd consider a Everlast 251si or a millermatic 215 if you got the cash.

[@luckygato8717]

Hi, what generator or power plant do I need to be able to move that equipment outdoors? Thanks

[@consaka1]

Ok I should probably watch this whole thing before asking but I cant wait. I hate flux core. This won't do gas?

[@LukeFosburg]

consaka1 Of course it will do gas! That is what it is meant for. Run some nice 70s6 wire and 75/25 and it runs like a dream!

[@consaka1]

Luke Fosburg I want one. Would keep me out of trouble for a long time.

[@carlosdejesus7026]

Hi Luke, have you found someone who has a aftermarket footpedal adapter?

[@markfournier3590]

Just wondering what the duty cycle is?

[@notchcoupeful]

Luke... I just got that welder.. Were did u purchase ur tig torch. At thanks again..

[@LukeFosburg]

Jaime Perez Got it on Amazon. Only 65$ for a CK Superflex 12.5

[@MonsterMuddy]

Luke Fosburg I looked around on amazon and couldn't figure out which one you ordered. Do you have a link? Maybe a link to all the stuff needed for TIG? weldingweb.com/showthread.php?436631-Anyone-know-anything-about-Lincoln-s-new-210-Amp-multiprocess-machine/page17 someone posted a link to this video ont he weldingweb website.

[@LukeFosburg]

MonsterMuddy Yes here it is www.amazon.com/gp/product/B00JV8OWF6/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 Since I have ordered it I see it went up in price $10. Im sure you could do a google search for the same tig torch and compare prices.

[@seansugrue2213]

+Luke Fosburg (RC M.D.) very good videos keep up the good work

[@lancehunter6231]

Will this machine stick weld schedule 40 pipe plugged into a 6800 watt generator?

[@LukeFosburg]

***** Absolutely! It runs great on 30amps at 220.

[@boricuaarecibo9259]

It's $1,999 in 2022 is it still worth it?

[@LukeFosburg]

Absolutely not!

[@boricuaarecibo9259]

@@LukeFosburg great thanks should I get the miller multimatic 215 instead?

[@boricuaarecibo9259]

@@LukeFosburg or the Lincoln 215mpi

[@j.copeland7305]

how is the tig process on this welder ? how thick can you tig

[@claas90017]

great video,does it offer preflow on mig setting?

[@LukeFosburg]

claas90017 yes it has a factory set p reflow but it is very short. I do not know if it's adjustable but I will check it out and let you know

[@larrycoyote7219]

Great Video. Thank you so much!

[@dksteelersfan]

Great vidio. Very helpfull thank you.Going to go buy one today and yes it's in stock. Awesome thx again

[@bigdogmaxbigdoghoso9308]

this machine can use .045 wire flux then i would think it then can use .045 hard wire, do you know if that application can be done on a 210 ?

[@LukeFosburg]

It can use 0.45 solid wire or cored wire :) Hope this helps

[@santiagovillarreal6647]

What kart are you using?

[@dunnoyolo2238]

This is made in Mexico correct ?

[@barbarakaczmar3555]

hey what is the thickest steel you have welded on each process?

[@LukeFosburg]

barbara kaczmar With Tig I did 1/4" with 3 passes and 3/8 with 5 passes. Stick is good to go. I welded 1 inch with an open root and backing plate with several passes. The Mig can get really hot if you want it to and you should be able to tear out 3/8 in a single pass no problem.

[@brianward6291]

Great video!

[@SOLDOZER]

It WILL do Tig, but it has no TIG adjustments and you have no idea of the amps you're using, so the TIG is going to be sloppy at best.

[@LukeFosburg]

John Rambo Not true. It has a tig setting in the menu and also the pedal allows you to control the amperage precisely. It is very nice at running tig and does a great job.

[@richmac918]

Nice machine but Lincoln has taken it upon themselves to increase the price of this almost 50% since this video was done and now I'll no longer consider it for my next purchase. I have a Lincoln MIG welder now but I want a multi process unit and while my Lincoln has served me well, this welder is now no longer the deal it once was. There are less expensive welders on the market now that have greater functionality and come with all the accessories (TIG torch, pedal, etc.) that Lincoln nickels and dimes you for.

[@nickb.6884]

Luke could you by chance put a link on here so I can buy this welder?

[@LukeFosburg]

I would pick it up from here www.weldingsuppliesfromioc.com/lincoln-power-mig-210-mp-multi-process-welder-k3963-1 I love the guys from IOC

[@enemyguitars]

Still no videos of how it actually welds?

[@LukeFosburg]

enemyguitars Yes, I havent had any projects lately but maybe ill just lay down some beads with mig and tig so you can see how it runs. Ill post a link a little closer to the weekend.

[@LukeFosburg]

kzbin.info/www/bejne/hny0pZp7fpuKpNk

[@thllc.inc.6226]

Hay boss could you give me your part number for you twist locking magnet so I can look it up on Amazon please. Thank you:)

[@LukeFosburg]

Ok here is a second video that shows a little short circuit mig as well as some tig coming from the new Power Mig 210 by Lincoln. kzbin.info/www/bejne/hny0pZp7fpuKpNk

[@chrisstorosko2395]

Luke Fosburg

[@SpottedEagleOwls]

Will this work on 50Hz

[@driftingpsycho86]

This just dose DC on tig right?

[@LukeFosburg]

driftingpsycho86 Yes just DC Tig. Good for all except aluminum. Can do that with a cheap AC welder and an Arc Pig though, so it kinda covers all your bases.

[@blhodge26]

Great video

[@bigdogmaxbigdoghoso9308]

tanks luke😄

[@evanmorath5253]

just so you know a true spray voltage doesn't start until 27-28 volts ...... hah 22volts is globular transfer

[@GeneralAlex4]

Hey Ding Dong; use your Dins connector people!!! It's safer! I like this machine for the weight factor and the dual voltage plugs.

[@LukeFosburg]

GeneralAlex4 I now have a "Dinse" connector, but while I was waiting for it to come in the mail I improvised :) Im glad you like it as well, it runs all processes very well.

[@Luke3420]

The Millermatic 215 is a much better welder! Much smoother arc with mig stick and tig!

[@Popssilk]

Had one nice

[@boricuaarecibo9259]

Really because I'm trying to decide between the two

[@enemyguitars]

Hooking the tig adapter up is absolutely ridiculous.

[@LukeFosburg]

enemyguitars Ya, in my opinion it should have come from the factory with that installed. Without a buddy to help its big nutz.

[@outdoorswithlarryrobin]

I am a ASME certified welder, this thing is Junk on 110. Could not handle 3/32 5p on 110 volt, blows breaker.

[@LukeFosburg]

Thats the great thing about flexing between 120v and 240v. I don't have too much trouble running 1/8 5P+ with it or some 3/32 7018. You do need a 20 amp circuit however. I wonder if your circuit is unable to handle a full 20 amps and is blowing at 15A

[@jadesluv]

Wish they wouldn't have left out AC TIG on this machine...dumb.

[@terryjbonnettejr1287]

yes it stupid it seems like every machine i look at its the same shit. all i need is a machine to tig 0,100 aluminum without blow threw I'm no professional welder is there something I'm missing or don't know please let me know.

[@jeffewing2385]

I hope the computer never fails? Probably 899$. To replace!

[@luissencion2855]

Guanto me cuesta esa maquina con todo y el paquete

[@garycoulter5957]

I don't like this machine at all! It doesn't weld E6010! What DC machine won't run E6010??

[@RBFurious]

1,000... this thing is 1,500 now. shame

[@heresteven]

😀😀😉😉

[@LukeFosburg]

Watch it run stick at .... kzbin.info/www/bejne/b3nKpmyDrbF3pbc

[@mib20000]

$1432.00 in 2019

[@MohammadAlshahrani]

$1829 in Nov 2021

[@boricuaarecibo9259]

$1,999 in 2022 FJB

[@Fredmullegun]

Twice as much now lol

[@osvaldolerma9111]

Can it run 6010?

[@Popssilk]

Does it do aluminum push pull gun.