Lincoln Electric Power MIG 210 MP Multi-Process Welder

[@giutubospatubo1546]

Lincoln: You sell a multi welding machine but you don´t get the TIG gun. Like buying a car with 3 wheels. Get your act together Lincoln.

[@licketysplit6234]

I just got one with the spool gun, ran it 120v works like a dime.

[@Shoptoolreviews]

That's great to hear. These are great little welders. That spool gun will come in handy. Nice purchase.

[@ansuz444]

Sounds likea great machine. I wish mine would turn on. Hopefully AirGas has the answer but I don't want to wait 3 weeks to have it fixed!!

[@andrewfield5656]

Now it’s 2 grand for the mp210. Glad I bought one early last year!

[@jeepcv7435]

Yeah I remember when they were 11 hundred now $1,999 or more it's nuts

[@jimmysapien9961]

@@jeepcv7435WOW

[@machineheadminot]

Could make a 2 way splitter where the gas line comes in

[@Shoptoolreviews]

that is correct, you can do that. Not a bad idea if you want to TIG and MIG from this machine.

[@wurlabyscott]

How does this old machine compare to the new 215?

[@SuperRam60]

I keep having an issue with stick welding . it seems that it won't keep an arch . once I do have an arch its only able to keep it for seconds . I run 7018 3/32 at 100amps.

[@user-kh6ov8dp6v]

Not enough amps and do you switch to negative polarity

[@SuperRam60]

@@user-kh6ov8dp6v no .stinger (+) ground (-)

[@jimmysapien9961]

@@user-kh6ov8dp6v👍🏻

[@americathefree3708]

Great channel. What other machines compare to this? New subby.

[@Shoptoolreviews]

We've reviewed a few Miller machines (211 & 220) and some YesWelder machines. Thanks for watching.

[@bobd.fletcherjr4912]

🇺🇸👍👍👍👍👍👍👍👍

[@garypostell5268]

Mighty low duty cycle not acceptable! Keep it !

[@herbhippler293]

Will not tig weld aluminum FYI

[@shaunedwards2131]

Can you weld flux core with gas with this?

[@Shoptoolreviews]

Yes, you can run flux wire and gas.

[@americathefree3708]

@@Shoptoolreviews Why? 🤨

[@roostercaffeine426]

@AmericaTheFree poor man's dual shield

[@MarcOsGeovaNy-f5t]

Un tutorial en español

[@weldweld5629]

Should know how to weld before people give a review of a machine

[@jamesharder5643]

I don't claim to know a lot about welding. I'm self-taught. I can hold my own, but I don't claim to be all that good. Why is he pulling? I have always thought that you push when MIG welding...if it slags, you drag...

[@nsboost]

@@jamesharder5643 push with thin gauge.. pull with thick.

[@zenteno5p]

to mig aluminum i don't goes to spend a lot of money in that machine

[@leekazan556]

It’s all great until the screen goes out and then you can’t do a thing. These machines have great bells and whistles and can make the most rookie welder think he/she is a professional. For the home hobby person Lincoln/Miller/Esab is going to take all your money and then tell you to kick rocks when the machine breaks down out of warranty. Stick to a transformer and learn how to weld!

[@jeremy7923]

It has a 3 year warranty... do you expect them to service it and give parts for free forever? Just curious. They also sell a 5 year warranty for this unit for an extra $115. Am I missing something?

[@Pandauprising]

@@jeremy7923 I dont think you are. This would be a great welder for rookies who have the extra cash to throw at it. All the info it provides on the lcd just helps get people familiar to the nominal values while giving the user more time to focus on laying a good bead. if anything I think this thing would be great for someone looking to get into welding and has limited practical knowledge on what feed speed, voltage settings, material tolerances and so on, especially if they are teaching them selves. Better to learn the correct things on a crutch than to learn the wrong things by trying to show off.

[@liuyunqian]

You did not even learn the machine yourself before shooting the video? TWO gas inlets for what?

[@Shoptoolreviews]

I know this machine very well. I was making a point that other machines include 2 gas inlets for different processes. Such as, TIG uses 100% Argon, while MIG typically uses CO2/Argon. If you only have one gas inlet, then you have to switch this line every time you change processes. If you have 2 inlets, there is not need to switch the lines. Thanks for watching.

[@markusjeff3080]

Richard you might want to think things through before you start criticizing people who actually know what they're talking about.