Is this even going to work…

Enter Ting's giveaway for your chance to win a Samsung Galaxy 10+ and more at mobile.ting.com/linusgiveaway
Not to leave our viewers dissatisfied, we built a furnace of a PC, a wind tunnel with 7 radiators, and our own data logging system to find out once and for all the EXACT effects of stacking radiators on water temperature.
Buy AMD Threadripper 3970X
On Amazon (PAID LINK): geni.us/Th48DG
On Newegg (PAID LINK): geni.us/bBIusr5
Buy Alphacool NexXoS ST30 Radiators
On Amazon (PAID LINK): geni.us/Mhq2Qns
On Newegg (PAID LINK): geni.us/L3XfABJ
Alphacool Temperature Sensor
On Amazon (PAID LINK): geni.us/UClFi
On Newegg (PAID LINK): geni.us/e9YA58q
Buy Nvidia Titan V
On Amazon (PAID LINK): geni.us/4tAnQF
On Newegg (PAID LINK): geni.us/DOGtb
Buy Noctua NF-F12
On Amazon (PAID LINK): geni.us/nbwWJ
On Newegg (PAID LINK): geni.us/eJuzz
Purchases made through some store links may provide some compensation to Linus Media Group.
Discuss on the forum: linustechtips.com/main/topic/...
Arduino code is in forum post!
Check out learn.adafruit.com/thermistor... for a good guide on how to use a thermistor-based sensor.
GET MERCH: www.LTTStore.com/
SUPPORT US ON FLOATPLANE: www.floatplane.com/
LTX EXPO: www.ltxexpo.com/
AFFILIATES & REFERRALS
---------------------------------------------------
Affiliates, Sponsors & Referrals: lmg.gg/sponsors
Get Private Internet Access VPN at lmg.gg/pialinus2
Get a Mech Keyboard: geni.us/RecNBTI
NEEDforSEAT Gaming Chairs: geni.us/needforseat
Get a Displate Metal Print at lmg.gg/displateltt
Use code LINUSMEDIAGROUP on Epic Games Store: lmg.gg/kRTpY
Get a 30-day free trial of Amazon Prime at lmg.gg/8KV1v
Our Gear on Amazon: geni.us/lmgamazon
FOLLOW US ELSEWHERE
---------------------------------------------------
Twitter: / linustech
Facebook: / linustech
Instagram: / linustech
Twitch: / linustech
FOLLOW OUR OTHER CHANNELS
---------------------------------------------------
Techquickie: lmg.gg/techquickieyt
TechLinked: lmg.gg/techlinkedyt
ShortCircuit: lmg.gg/shortcircuityt
LMG Clips: lmg.gg/lmgclipsyt
Channel Super Fun: lmg.gg/channelsuperfunyt
Carpool Critics: lmg.gg/carpoolcriticsyt
MUSIC CREDIT
---------------------------------------------------
Title: Laszlo - Supernova
Video Link: • [Electro] - Laszlo - S...
iTunes Download Link: itunes.apple.com/us/album/sup...
Artist Link: / laszlomusic
Outro Screen Music Credit: Approaching Nirvana - Sugar High / approachingnirvana
Monitor And Keyboard by vadimmihalkevich / CC BY 4.0 lmg.gg/fxHYK
Mechanical RGB Keyboard by BigBrotherECE / CC BY 4.0 lmg.gg/Q9yyQ
Mouse Gamer free Model By Oscar Creativo / CC BY 4.0 lmg.gg/8upii

[@xperia5295]

Pretty sure Corsair just tricked LTT into doing their research for them.

[@LL-dv2vf]

Corsair has big brain!

[@heroes69]

Lol

[@krishcrash4]

Ltt is getting abused by Corsair

[@trialgamingftw9988]

Corsair : I'm Gonna Do What's Called a Pro Gamer Move

[@apimar]

And didn't pay a dime as well. Corsair high IQ yes.

[@MysteicVoltronus]

As one of my college professors said to me in Circuits 2, "When it comes to testing a system, especially an electrical one. You will almost always come to the conclusion of....it depends."

[@jaytate491]

I'm married to an engineer. That is always her answer.

[@evanbyrne8335]

What you will find is what it depends on. That is also good information.

[@TheLastCrankers]

One of my professors (he used to teach electronic components and building circuitry), first class and he goes: Prof:"Imagine you're defending your engineering theses and the comitee asks you a question. What's your response? If it starts with anything else than "it depends" then you probably got the question wrong, or didn't study that topic."

[@skywz]

So in other words, it depends if the answer is it depends.

[@313Games]

@@skywz Well....it depends.

[@ericchen1248]

Now I'm curious as to how many people actually interpreted "stacking radiators is bad" as "stacking radiators without adding any additional fans is bad" vs "stacking radiators (including additional fans) is bad"

[@sparrow6190]

Stacking radiators with fans AND spacing between radiators for fresh non recycled air is best. That way you nearly remove all preheated air.

[@mattlewandowski73]

I am still trying to figure out why corsair, a company that has a history of making good cooling gear, would consider a straight flow series stacked radiator system without sandwiched fans to be a legitimate case for making an argument against stacked radiator systems. the best I can figure is I have missed a point of context here in the argument between corsair and linus. It took me all of an hour back when I first heard of liquid cooling for PCs, despite not having a degree in theromodynamics, to figure out that a reverse flow series stack with sandwiched fans would have greater cooling for the form factor of a PC case even if the air is preheated by the non waterblocked components in the case, and even better if you can feed them fresh air and draw the preheated case air through a different fan group.

[@czbuchi86]

i got from it "stacking radiators where hot air from first one is cooling second one is bad"

[@funkdahmental]

Yeah i assumed people were sandwiching fan > rad > fan > rad etc.

[@spagettifelge7191]

These "engineering" focused videos are by far my favourit content on your channel. Stuff like this where you build your own meassuring system to gather and analyse data on some crazy test-setups is imho the most interesting and entertaining content!

[@uvufal]

Yeah this seems super cool! Did you find any other videos similar to this one? I'd love to binge em. Cheers.

[@fatlessbacon2210]

We gotta thank the team who produced such a beautifully well explained video. The amount of effort put into this is amazing

[@yourpreston1]

This was the minimum effort required to try and publicly shame someone. The previous video is an embarrassment.

[@fatlessbacon2210]

Preston I am not shaming them I mean it. The team who produces these videos is truly hardworking

[@xx-----------xx873]

Are they? I’d say that the distribution of manpower has made this kind of thing easy. I’d say that this video exceeds the regular LTT type video.

[@LzysGraphics]

DinkySailor 2560 I think he might have possibly been talking about the video, in which case he was simply disagreeing with you

[@umermasood6415]

@@fatlessbacon2210 hmm 10 emeralds

[@peppersgc]

I love it when they go full Mythbusters.

[@Nurpus]

Now it's time for Corsair to start a video series titled: "$H!T Linus Says"

[@Scie]

That would be a long series

[@kedarkulkarni3030]

Isn't that all the videos on the channel 😂😜

[@nightfox6738]

or "Some of our $h!t that Linus dropped"

[@XXun4ya]

Linus says shit (LSS)

[@ReallyCoolSite]

Damn, the “new” deepfake of Linus is soooooo lifelike.

[@thomasr7129]

LOL

[@woswasdenni1914]

@Don Mega i guess its very funny if youre on that stuff they are on

[@deluxesofa]

Don Mega r/woooosh

[@deluxesofa]

woswas denni r/woooosh

[@scorpion07070]

This is the most effort I think I've ever seen anyone put into winning an argument in the comments section.

[@ting]

Over a million views and giving away an expensive smartphone? Linus is playing 3D chess in the KZbin comments section.

[@esatd34]

@@ting this is nothing, really

[@Ignacio.Romero]

And lose

[@akiraokami]

I have seen a lawyer in one state become a lawyer in another state just because people were commenting "things are different in this state you don't know what you're talking about!!!!!" (said lawyer ended up being right in their original statement)

[@TheYang2208]

@@ting is nobody going to talk about the fact that the official Ting channel is commenting on LTT videos

[@woodant1981]

Corsair employee 1: we can't afford research Corsair employee 2: yes but I know who can The rep: let's set the plan in motion guys, I'll make the claim

[@je.m3320]

Lmao Corsair engineer and Pr team big brain for tricking linus to this stuff for free

[@WebbSM]

Well, they did send pics of flow simulation data

[@cakeisalie]

@@WebbSM shit you had to exist

[@Jako1987]

You just can't do the dishes. It's impossible!

[@woodant1981]

Liam Nolan oops must have been my bad non ECC RAM😂😂

[@kepler1175]

“Colin, never content to just take the easy path” Linus that means he learned well from you

[@jzsxph7007]

No, linus takes the easy path

[@Tucanazo69]

@@jzsxph7007 The drop path

[@LionsPlayHD]

@@jzsxph7007 linus tries to go the easy path first, then something goes wrong and it changes to the hard path

[@shattr7623]

jzsxph mo

[@collinnoble390]

damn, i feel honored

[@JimmyMcneil]

When you get a Linus ad for pulseway on his video “We heard you like Linus so we put Linus before your Linus so you can Linus before you Linus”

[@the_blueeagle]

Corsair: yo, your radiator setup is kinda inefficient Linus: Give me like 2 weeks, I´m gonna check myself

[@KingBarney]

They proved it the first time, they did this for the whiny commenters asking them to do tests in unrealistic circumstances

[@Genda1ph]

As someone whose university degree included thermodynamics: second test is referred to as counterflow, and is *always* better, provided your heat exchanger doesn't get damaged by thermal stress due to temperature difference.

[@TobiasDettinger]

Can confirm that, chemical engineer with thermodynamics in one semester.

[@Return_To_Sender]

@@TobiasDettinger also can confirm, 10 mins of google research.

[@nebulium6641]

can confirm, no degrees or anything you guys just used big words so i know what you're talking about

[@twitchmania7614]

Also can confirm degree in photography

[@NickTrouble]

7

[@notamouse5630]

The electrical engineer in me predicted these results. For better results, I hypothesize that radiators with the fluid flow in parallel will do better.

[@MaxUgly]

Agreed. Parallel radiators would be the same as having a bigger radiator, right?

[@MrJ4ckie]

Disagree. Radiators in line with the fluid flowing the opposite direction of the air should be optimal, that basically makes it a counter-flow heat exchanger (most efficient system). Putting the radiators in parallel would probably be similar to having one incredibly thick rad with a fan capable of driving air through it, and be similar to one cross-flow heat exchanger, which is better than a parallel heat exchanger (both fluids in the same direction), but less efficient than a counter-flow one, so it should in theory fall between the two different setups they tested here. The 'heat exchanger' article on wikipedia is pretty much on point in explaining this (much prefer the German one on the off chance you speak it).

[@bulldozer8950]

@@MrJ4ckie what about facing two radiators into each other? Maybe eventually the heat built up in such a system would open a portal to hoth and you pc would just be eternally cooled by the temperature of an ice planet.

[@TheRealBaDaBingDK]

@@MaxUgly Nope. Parallel or seriel does not matter at all for temps. And if you only have one inlet and one outlet on your pump, it will not matter for pressure either, as there are no more restriction in a radiator, then in your loop tubes. The cooling of your loop is determined by the cooling capacity of your radiators, and the heating of the loop is determined by the power output of your components. If you split the loop and put the two radiators in parallel, the flow will fall to about half, and soak up more heat from the component on that loop, and the fluid will remain longer inside both of the radiators and get slightly more cooling, but because the fluid was warmer before in entered the radiators, and they mix together in the same reservoir anyway, before being pumped out again, it will not matter at all.

[@MaxUgly]

@@TheRealBaDaBingDK The restrcition works like resistance in a wire. More downstream restriction all adds up. The rest of what you said is correct though, I believe. If you still disagree, I will take the time to type out the math here for ya. I appreciate the conversation and unlike most other times I believe I am correct here.

[@christiancyrellsantos4500]

“Does a little bit of math” Saw hart equation* Cries in addition*

[@louisrorison8457]

You know, it's really nice when you see someone actually take notice of criticism and constructively react to it. Your ability to listen and engage with an audience that always keeps me watching.

[@princebanini]

me too

[@PepperPete11]

Yup

[@VM-lt9wl]

Well when Billet Labs wanted him to test their product with the GPU *it was made for* he didn't want to shell out the $ to do it.

[@micahmosier9066]

Honestly this was very well done and I would love to see more content like this. It had great depth without dragging on for days, it focused in on a specific area, and had great custom testing. The custom testing method was really simple but well thought out and implemented. Linus, if you had this kind of stuff on floatplane I would surely pay to watch. Great video!

[@rusinsr]

I mean, they upload the same content to floatplane, just earlier... so you could pay to watch :D

[@kiplinght]

You're looking for Gamers Nexus if you want actual science

[@banderas1879]

My mans made a whole review

[@sandi260]

Probably for dummies. I already knew the result before he even made this video.

[@sandi260]

@@rusinsr LMG literally makes millions off of KZbin. I cannot believe they feel the need to charge for this content.

[@savvassidiropoulos5952]

When the radiators are stacked in sequence, indeed the warmed up air that goes out of the first radiator, has less ΔΤ compared to the hot water in the second radiator and heat load is not effectively removed. By the time the air reaches the 5th or 6th radiator, it's probably as hot as the cooled down water that goes through that radiator, so no real heat exchange is happening. Like you (correctly) stated, the stack of radiators just increases thermal capacity. BUT, try to put the radiators in parallel, so that each radiator gets fresh, cool air. In such an arrangement, the heat removal will probably be almost doubled with two radiators. And because the second radiator will get cooler water with the same room temperature air to remove heat, the progressively lower difference between "hot" water and "cool" air will again create diminishing returns after 2 or 3 radiators in parallel. Since you have made up the rig, it's worth to try this out. You don't need to work up to 6-7 radiators in sequence. Just try two and compare with one. And by the time you try a third one, I am guessing you will see significantly less than 3x the heat removal.

[@Cyberguy42]

Nice, this really did address the main issues with the previous testing.

[@Sevarro]

You're going to end up launching a new channel entirely dedicated to your engineering beefs with Corsair

[@NicolaiSyvertsen]

Could call it Linus Tech Chips. As in chip on the shoulder.

[@kevl0rneswath]

LinusTechBeefs

[@ShreyasYD]

Don’t give him ideas...

[@ghouldrago360]

That channel won't be able to keep up linus would need more staff

[@DorGreen1]

i'd watch the *hit out of that channel!

[@devindykstra]

11:22 really making good use of those 8K cameras I see

[@jtdHenk]

That zoom is the reason to shoot in 8K!

[@dragoneatingpixels2750]

This is a bit late, but I think something is up with your sensor calibration, it looks WAY too noisy. Especially given that you need extreme accuracy to account for the slight temperature measurements between each sensor reading since a 1 degree difference would completely change the outcome of your conclusion. I know thermistors are typically +/- 0.2 degrees C but the process in converting a resistance -> voltage -> digital signal -> raw number -> temperature often leads to huge amounts of error to the point of +/- 2 degrees C and this shows up in your data especially with your last test. For once I know a bit about this so here are some suggestions for if you guys decide to do something similar in the future (please do! I love this kind of content): - The Arduino's ADC should be calibrated so that you get a better analogRead(). (I've never used the Due so I'm not too certain about the noise) but looking at the AT91SAM3X8E datasheet, an Integral non-linearity of 2LSB total actually doesn't seem that bad, assuming you guys are using 12 bits of resolution? I've done personal projects with various Arduinos and switching just the Nano to a Zero once changed my readings to +/- 0.1 C to +/- 0.5 C. For comparison the LSB difference between the ATSAMD21G18 and ATmega328P was 1.2 and 2.6 albeit with different resolutions. - Not sure if the ADC is the main culprit here, but it's a possibility since not all ADCs are created equal. Upping the resolution from 10 bits to 12 doesn't always make the noise better due to offset and errors. I would link it if I could, but if you google "Precise voltage measurement with the Arduino board. skillbank", the first result is an amazing guide and a good read on how to properly calibrate the Arduino to read voltages properly. It gives a good explanation on analogReference as well. (Optimally using a reference diode would be best for this) - Why use a 250ms delay with a moving average? The easiest way to get rid of the noise at this point would be to just deal with it on the software side and sample quickly and average a lot of values at once. Spitting out the average directly instead of a moving one would also reduce lag in the data. Ok I'll stop since I've been way too technical with this already sorry, but anyways mad props to you guys for revisiting this, and for using Steinhart and ice bath + boiling water calibration and not using the thermistors directly! I was pleasantly surprised when I saw how far you guys went to get your get the best results out of your testing! Hopefully if you guys see this and do decide to try and improve your data for future projects this helps a bit. Unfortunately, when you want to get accurate readings down to a tenth of a degree, it just gets increasingly harder to do. Edited to fix formatting.

[@skarrambo1]

Good to see another person saying this. All my hours spent in a lab with a datalogger and array of sensors, thermistors included - if I had data that noisy I'd swap all my wires, and be very worried aha I honestly don't know why they didn't poll the sensors for their maximum polling rate. 4Hz is immensely low - and as I suggested elsewhere, they should link raw data graphs in the description, but absolutely smooth those curves (to a proper fit of course). Then pedants and cynics can check the description, everyone else sees the clear picture

[@dragoneatingpixels2750]

@@skarrambo1 Glad to see that you agree too! And yep my first go to with noisy data is to double check if I wired something wrong and check for interference but their breadboard setup seems fine at a glance. I know they do this mostly for entertainment and fun but yes! I'd love to see full documentation of this project, it'd be really cool if they uploaded everything from the code and schematic to the .stl files that they used (not that anyone with a sane budget could replicate this haha) along with their raw data. Something as cool as this deserves it

[@marinus86]

I question the value of the high sample rate with the "calibrated" thermistors. Just use DS18b20s and sample at 1Hz, you only need to sample at twice the frequency of the effect you are trying to measure. Higher sampling is making all the subsequent steps more difficult. It is not like the effect they measured had any useful information at the sub-second scale, the water temperature did not have meaningful fluctuations within 1s timescales. The noise introduced by their thermistors and calibration system really degraded the quality of the data. It took 14 days to build that in part because they fiddled with the calibration and adjusting the potentiometers. With DS18b20s they could have used one digital pin with much simpler wiring, and higher accuracy and precision.

[@arctikf0x698]

This was a very interesting read and I am not even interested in the video. Just appreciating the level of expertise here.

[@jonburnett6143]

"Spitting out the average directly instead of a moving one would also reduce lag in the data." ikr too bad they didnt have a dyno guy hanging around

[@KomodoDragon913]

Great video series, looking forward to subsequent videos. Some related questions I have are: Is there any benefit to stacking fans, What's the best placement of fans on a radiator, What about a fan on both sides of a radiator?

[@imscott7]

Thanks for the follow up, due diligence and listening to the feedback. As a mechanical engineer with some thermodynamics experience I am now satisfied.

[@mechanicallydev4536]

True... not perfect, but it's nice to see the effort.

[@YOEL_44]

As a carpenter with some clamping experience I am now also satisfied...

[@makunouchiippo2542]

you have 69 likes and thats nice, now you need 42 comments

[@nagarajanvaidya9266]

1:57 imagine if they reached out to Corsair instead of Alphacool xD

[@loveelpierre5278]

Or noctua

[@pkennethv]

@@loveelpierre5278 Noctua doesn't make radiators though?

[@markusklemm4516]

The probably went with Alphacool to avoid a conflict of interest.

[@MattTheKnight]

@T. Hane He said he reached out

[@sandi260]

Their main issue is their writer who keeps using "more better" *eye roll*

[@Dunewarrior00]

Great work! This is very similar to 2nd or 3rd year mech eng lab experiments, so the outcome is known, although Corsair not specifying the fan increase is unfortunate. For even more fun, try the experiment again without rads at all, and observe the effect of just increased airflow from the extra fans.

[@matthiasriebl5643]

Can't believe that I discovered this channel just now. Never seen someone explain and test IT-Stuff as good as Linus. Crazy good Content!

[@aahnnt]

when a programmer makes a graph "sensor 0"

[@brazeiar9672]

Which is the correct thing to do because you can increment through the sensors then use modulo arithmetic to easily get back to zero again.

[@pigydog123]

@@brazeiar9672 YOU IS BIG SMART

[@1johnwg]

Exactly why programmers do - and almost no one else.

[@boardhopping5083]

When the data is input through a program. Its probaply on PinIn 0 so the Arduion Assigns it an index of 0.

[@williamyang4533]

Python starts with 0 instead of one sooo........

[@FelixEFX]

Corsair: this doesn't work. LTT: haha radiators go brrrrrrrrrrrrrrrr

[@Anankin12]

LTT: oh wait, u were right!

[@Anankin12]

You should have watched the video to the end, which I know you didn't because the conclusion happens about at the 10 minute mark, the video has been online for 14 minutes and you posted 7 minutes ago.

[@naveenbattula]

Comments that did not age well

[@KanavDev]

Hey that's a dani reference.

[@dtiydr]

@@Anankin12 That was a good one.

[@TheDaneDavid]

Great video - low the deep dives that you invest in here! One thing that I would love to see in the future is that you "clean" the data so that you first show the raw data, and then get rid of all the tiny spikes, as those I would assume are just reading fallouts and not actual temperature bumps (in the case of 1 vs 2 rows of radiators you have a delta of more than 2 degrees in the fallouts). Overlay the two at first and then use the "cleaned" graphs :) Keep up your great contend!

[@TheJALOBE]

The production quality on this channel has just grown and grown over the last few years. Nice one

[@mrswats]

At this point after all the testing I would love to read an academic like paper with all the details and more in depth analysis

[@aniketmishra9265]

I'd like the read it too.

[@HeLithium]

Noooo.. I'm already getting bored with the vid no more paper lol😂

[@Hunter-jw9sj]

“Is this even going to work?” If you don’t drop any part then yeah, probably.

[@emgr7653]

Yeah if even the verges PC worked then it will

[@tomekjanasinski370]

XD

[@dumpsterfire4269]

flashback to when that pc build fell from the table

[@Chris_P_Bacon]

This joke never get’s old.

[@alialmahdi7256]

Linus just got vectored

[@MacroAggressor]

Dude, props to you for admitting when you're wrong! Seriously, it's refreshing to see.

[@brandon2755]

“Ting wants to save you money, pay only for what you use” as I glance at my 30+ GB data usage last month

[@justabrokeredneck]

psh. before verizon changed their data policy, i easily used 300GB a month. of just mobile data. not even including my hotspot.

[@justyn6750]

@@justabrokeredneck HOW IS THAT EVEN POSSIBLE

[@techhelpportalextras3007]

@@justyn6750 KZbin

[@bfdmodz]

"More rads definitely equals more better" - Ladies and Gentlemen I present to you Science by Linus.

[@jetstreamlynn3156]

Linus equivalent of "Just strap on more boosters!"

[@jetpackdemon1420]

Me simple man prefer simple math

[@tbilal11201]

@@jetstreamlynn3156 damn ksp reference

[@shanez1215]

It's like when Mr Krabs ran into the stack of 30 paintings Spongebob put there.

[@chrismoustaklis9982]

Not in fallout tho

[@ValkyrissaGaming]

When I saw the thumbnail, I thought Linus was going to overclock an i9-10900K

[@yalopov]

intel on suicide watch

[@tahamikhan4768]

Even i

[@magicbox4059]

Intel CPU are not good for banchmarking. INTEL 2020

[@auturgicflosculator2183]

The jailbaitesque look is quite flattering~

[@kashashk]

Roasted

[@Helpsmallbusinesses]

Y'all went full science on this one. Awesome video!

[@Kaxlon]

Stack all rads in a long box. They should not be touching. Connect 2 vacuum cleaners to pull the air through. Run pumps in reverse. Chuck the vacuum in another room if the sound bothers you. Might aswell try as you already built the lab setup. 😀 PS. You cannot achive lower than ambient temp with a passive setup as shown in this video. But you can add water spray to cool the rads and fluid even more.

[@johngaltline9933]

I feel like the actual answer to the question was glossed over in a single, easily missed, line of the video. as long as the air passing through each rad has enough thermal capacity to pull heat from that rad, it will cool the water inside. Sadly when using fans designed to move air through a single rad, it's moving far too slowly, the air getting "filled up" with heat before it ever gets to the next rad in the line. Use some loud AF, high speed, server fans in there and re run the tests. ( or do it dirty and use a furnace blower ducted in.) Think of the air like a bunch of buckets on a conveyor belt, and each rad as a hose pouring water from above. If the buckets are moving slowly, the first hose has time to fill each bucket up before it gets to the next one, where as when moving faster, each bucket only gets partly filled before moving to the next hose in the line.

[@joseiparra9944]

Best explanation for heat transfer so far!!!

[@alexvolute7454]

We all know that if you have a huge amount of airflow, you will have better cooling, but that isn't the point of the video. Nobody is putting 10000RPM fans in their PC, so it is irrelevant to the question.

[@johngaltline9933]

@@alexvolute7454 the question in the video is if having the same air moving through 2 rads works any better than just one rad. the answer is, if you have enough air flow, ot cool enough air to be able to soak all the heat from the first rad and still have thermal capacity, then yes, if not, no. simply testing it with one set of fans designed to push air through a single rad does not give enough information. there are plenty of quality fans on the market that can push plenty of air, and if you actually care about cooling rather than silence you can run them at high volume to push plenty of air.

[@beginerchaos]

@@johngaltline9933 pushing air through it wont help, it's basic thermodynamics. the air that gets to the next rad will never be as cold as the air going through the second or third or ... air is a very bad heat conductor which is why is a very good isolator. if the rads are next to each other instead of on top of each other then you should see some better performance on the second one as the first rad takes out part of that heat and uses the same temp air as the first one. hope this makes sense - sorry if i misunderstood something

[@lacucaracha111111]

and who doesnt have a 2nd radiator without fans?

[@BlueRinXIV]

Linus: "Delta T" Steve from Gamers Nexus: *heavy breathing*

[@yxlop4893]

Delta T is fine Steve doesnt like %t over t

[@gardian06_85]

as long as you use the same measurements and comparisons (Celsius does end up being constrained by granularity at less then 100) though when you start doing Delta %T, or % difference between delta-T that is when you are playing with the Wrath of Gaming Jesus

[@Silent_Shadow]

Steve is boring to watch. Informative...yes....boring....hell yes

[@noproki2838]

Delta T always in Kelvin.

[@michaelvanrheede7225]

@@noproki2838 uhm no

[@Lalit-yw2tb]

Man, Linus has matured a lot. I am glad that I have been seeing you since the last 5 years. You admit your mistakes when you are wrong, that's why I love your channel. You are doing awesome work.

[@ashflame6888]

Since when has he not done that?

[@knection1986]

I would like to see them all take in fresh air and see if that makes a significant difference. I know it would force everyone to have gargantuan cases but this is food for thought.

[@tiruialon]

Ya know... for once in a live time: You guys did an exceedingly great job. This was amazing to watch. I love that, albeit under great outside pressure, you guys are ready to spend time (and money) to seek the truth and correct your former mistakes. Knowledge is important, and I rarely if ever hand out praise, or comment in general, but respect where respect is due. Thank you.

[@browncoatz]

I second this. Immense respect for this KZbin channel 😃

[@atharvamurhe]

Agree. And also it takes huge balls to accept that you were wrong, that too on KZbin.

[@zacharylowe8083]

This channel always has quality content with excellent data. People severely underestimate Linus genius

[@lennysummers8892]

Haha radiator go brr

[@tryingtothinkofsomethingcool]

Why did you have to add snark to that comment? L

[@AlexeiDimitri]

"So we were wrong... only at domestic environment." "Suck, it Corsair! At Server environment, more than 2 radiator help a lot."

[@fred_e]

Nice tl;dr

[@MrEtronic]

true cause your not using fans in servers your using angry and stressed gremlins which cast wind magic ..... anyone close enough is cursed with permanent hearing damage.

[@wowoslashfan]

In their defence, it didn't help that much

[@Silent_Shadow]

It doesn't help enough to justify the engineering and cost required. Not to mention the many added points of failure. It's cool in theory, and not in reality.

[@tomf3150]

Just buy a thicker rad, you'll get the same effect.

[@beloit9115]

These are the videos I subscribe for. Science with epic tech and memey presentation. Top notch fellas!

[@karl4861]

Nicely done! Some ppl might think this is janky af, but if you ever saw a lab in some project you would be suprised at the level of jank present.

[@mad1pengu619]

4:03 The Linus Battle Cry©

[@Jamfmfmx]

Dude wow

[@TheKamuelaKamike]

gnarr

[@nikolassehman]

“And I learned something today...” just like how your gonna learn something about our sponsor, TING! - come on Linus! You’re off your game!

[@mrsenxo]

i even said this out loud expecting to say it with him hahah... so disappoint.

[@aluandcache7336]

Lol just because you don't get sponsors.. lol

[@FleaOnMyWiener]

@@aluandcache7336 æ

[@guilemaigre14]

Glad you did it the right way this time. Usually, when an engineer corrects you, they more likely are right. They know their stuff after all.

[@nightfox6738]

This is one of the reasons I love watching Linus. He's not afraid to admit to being wrong. That's not a quality you see in a lot of people and endears him to me far more than any communicator who just gets everything right. Mostly right but capable of admitting when you're wrong > Always right

[@riujithetechnician]

Just watched pulseway ad with Linus on it. Got to say the man's gone a long way from his 1st few unboxing videos. Congratulations

[@thomazzzzi]

“Laughs in Matlab”

[@sinister3128]

Being an Indian and not watching the video yet I am very confused.

[@Flamefuckininsane]

Same

[@Ilikepapyrus]

*Laughs in Python 3*

[@loicvanderwielen]

@@Ilikepapyrus I find Matlab much more practical for matrix calculus than Python but the cost argument can't be overlooked. Although slightly less convenient, Python allows for most if not all of what Matlab does at no cost in performance and for free...

[@rohanbadari4063]

😂😂

[@jch7807]

Cars use stacked radiators as well. Cool test!

[@DYSshorts]

Needed one more of those noctua chromax fans to match my build, but due to backorders I've been waiting for it for months...I now see where they all went lol...just dangling on the wall behind you.

[@jlkiller008]

First of all i need to thank Linus that hes still reading pretty much all the comments although this channel has over 11 million subs. Thanks Linus for listening to the community!

[@ting]

He's not the only one reading all the comments.

[@the-trancestation]

@@ting do you got some names?

[@dravidan8732]

The Trancestation lol, the actual company responded, theyre saying they read their comments too

[@CED99]

@@ting hey hey its our sponsor!

[@FranciscoTChavez]

The odd part, I would have expected the comment that described the basis of that test setup to be highlighted.

[@simeongawel3985]

You have helped me so much when it comes to building, because of your videos I know how and what I need to do to build my first pc

[@skieshimself8147]

Cool story bro

[@divinegaming1218]

skieshimself lmao

[@xionova3254]

You know how to make a pc? Ok, name all of them.

[@ceriumin3227]

OK but isn't that basically 60% of people here

[@scenawio866]

epic

[@igor.lacerda]

Which hose are those? is this from alphacool as well?

[@ElyseHorvath]

Do more videos like this I like the science and math and the actual learning

[@magnus0529]

"BOOM HEADSHOT, GOTCHA CORSAIR!" LOL

[@munk_ken]

I think they should have brought in a Corsair rep to say "BOOM HEADSHOT, GOTCHA LINUS!"

[@IAmTheRealKen]

Love the Pure Pwnage reference

[@Rook101]

My cat's name is Pwnage.. I died when he said that lol

[@dxkaiyuan4177]

shady guy in dark alley: wanna do some blow? Me: yeah Shady guy: *pulls 7 radiators and fans out of his trench coat, attaches to threadripper and exhausts 50°C air in my face*

[@Nik-ff3tu]

#1 why would you be in the alley with the shady guy #2 no one offers coke to random people on the street

[@leon81061]

@@Nik-ff3tu You´ve never been to Miami right?

[@aadityatiwari2561]

@@leon81061 I haven't but I'm laughing my ass off right now.

[@Yuy_V.2]

@@Nik-ff3tu in a dark alley every guy is shady tho in a bright alley...

[@elijahfartpoop]

@@Nik-ff3tu he wasnt offering coke he was offering cold air

[@mattdeyell8151]

Good to hear someone admit a mistake and change their opinion when confronted with evidence. Was nice to see.

[@JamesAustin]

Oh man I was worried he wasn't going to do a contraflow setup for a minute there, and I was yelling at my screen, lol.

[@insertdead]

5:01 wait noname makes reservoirs? I thought they were only in the food industry

[@fireking2343]

@@T. Hane I'm not going to r/woooosh you, because that's stupid. However, I will point out to you that both of them were joking about the 'example' and 'no-name' products and the joke was that all the example and no-name products were from the same manufacturer.

[@FrenchysPlaysTV]

NC?

[@Ikxi]

Noname as in not branded or a brand that's too obscure to have heard of it

[@_framedlife]

@@Ikxi no name is a Canadian food and food-related products brand

[@Ikxi]

@@_framedlife Ohh ok From Germany so never heard of it

[@sreeharylaiju]

7 radiators and 7 pair of blowemetrons 🔥 (for enough air flow) I was expecting to see this test 😂

[@NitsuSaiNeko]

Please record with RTX Voice on, thanks

[@macse7en]

@@NitsuSaiNeko haven't heard this insult before lmao

[@CED99]

I'm kinda disappointed that there weren't blowemetrons tbh

[@marsrover001]

Scrapyard wars, but the only fan you are allowed is an electric leaf blower. Sponsored by (some lawn tool company). I would expect creative cardboard case modifications and plenty of ducktape.

[@RomainCavallini]

@@marsrover001 ahhh DuckTape ! Let the poor animals live instead of shoving them thru cardboards !

[@zfpv7211]

It kind of seems like more rads acts as a bit of a low pass filter for the temperature differential (less “noise” in temperature feedback). But would of course be much harder to cool after heat soak.

[@jhoff12358]

Crazy what accurate, super detailed testing, and proper analysis shows. All praise be Tech Jesus

[@dustinkrejci6142]

When I Canadian says bloody in a sentence and he’s irritated.... You know the vinyl record just scratched... and hard!

[@abdullaishfaq3166]

Me: * looks at thumbnail * "As long as those are LTT Noctua fans then yeah"

[@JC-lm3bb]

"I green lit a project to go full crazy on a test rig" hearing this just made me grin

[@nigelwang2447]

I wish this channel was around when I was doing my engineering degree. This would have been a lot more fun to apply learned lessons.

[@Sam-hj8hy]

When you look at any radiator, 80% of the heat energy is removed in the first 50% of the heat exchanger. The applies to the first half of the thickness of the core or the first half of the length of the tube going from end tank to end tank. By making the tubes longer or the core thicker to you adding a lot of resistance to the system to extract that last little bit of heat. You are almost always better off adding more rows to the system if you have enough room to reduce pumping losses through the system. The may not be a huge issue with a pump that is supplied power from the wall, but in race cars it can help produce a few more horsepower.

[@teknoguy2002]

That looks just like my main rig's setup. MOAR RADIATORZ!

[@theq4602]

WELL DONE MY HATS OFF TO YOU LINUS & CREW!

[@dougfurr5217]

I have never seen tests using rads in the way I use them. In my last few builds I have been mounting my Rad sideways. It pulls air in from left side of case, and exhausts to right side of case. I have it mounted directly behind the front of the case(Silverstone SG-11). I use the Corsair H80i V2. The rad is partitioned so it does not pull or eject air into the rest of the case(MOBO, CPU, GPU). I also have PSU fan, GPU fans(RX 5700XT), and a single case fan. Temps great.

[@Hitokiri_Ace]

Hey, thanks for redoing the testing. :) I appreciate all the hard work and time you guys invested in this. Have a good week, and keep on with the great content. :D

[@hemant_jadon]

That's why I love this channel, always there is something to learn, as well as correcting the findings of the previous tests in a provable way. Great work LTT :D

[@adriangunnarlauterer4254]

the data logging could also be implemented with an regular arduino teensy or a bluepill and if your mcu has to few analog inputs you add an analog to digital converter that works over ic or spi.

[@StuartHollingsead]

but did you program the data logger in assembly?

[@aaronspeedy3087]

Linus: We did this for two frickin' weeks to make sure Its super accurate Comment Section: tHe tESt wAs uNreliAblE

[@Haitham0]

two*

[@maurice7017]

@@Haitham0 congratulations you have achieved absolutely nothing

[@Haitham0]

@@maurice7017 ok

[@yakitatefreak]

Waiting to see how GN would roast the setup...

[@YOEL_44]

@@maurice7017 So did you, wait a minute...

[@HateGplus]

"kinda like our sponsor" was the least convincing segue that you have done, that I have seen at least. :D

[@TheDJHoller]

@Tharealmb I've always imagined it as "segway"

[@Skinflaps_Meatslapper]

Segway is a pun based on segue, as both are a means to get from one thing to another. Could also be due to the fact that people would see segue for the first time and pronounce it sea-goo, because it's not a very common word in the average person's vernacular. Perhaps it was both.

[@Skinflaps_Meatslapper]

>>>Be right back hon, I'm taking the sea goo to the neighbor's >>>You're going to WHAT

[@shinenyyan6594]

Yeah I was not prepared for this x))

[@BobJones-bh9qz]

I learned so much in this comment thread; this is great, very high quality comments

[@djrocc-jamaica3527]

Linus Great Video as Always!! Do something on Benefits/or Not of Fan Shrouds. I Notice most of your rad/fan testing is with the fans placed right up against the surfaces. Where I have seen in one test, that placing Space/Shroud between them improves things by almost 6%, especially in push/pull.

[@jonathanatch]

Linus have you done any looking in to a one radiator and 10 fan or greater stack because I rember at one point seeing a video about this in the past with better cooling for the whole loop.

[@TheSlowpC]

Dropping the fellow Canadian “pure pwnage” .... classic Linus. Classic. :)

[@yonkocommander5531]

Gotta love how the ltt team learn while they teach us

[@WeaponsGG]

Ikr it's like the blind leading the blind. Wcgw?

[@ursmii_]

where could I find the serial data logger?

[@HerraTohtori]

Good work. This establishes that stacking radiators in terms of both airflow and coolant flow offers diminishing returns at best, and more practically a single radiator offers functionally better results (with more radiators either hurting performance or simply not doing anything besides being a money drain). Now for the more interesting combinations... 1. Airflow-stacked radiators (using the same airflow through both of them) but with two coolant loops (for example one for the CPU and another for the GPU); 2. Coolant-stacked radiators, with both getting equally cool air but daisy-chained to run the same coolant through both of them in one loop; 3. Completely separate radiators, with each having equally cool air and each running their own coolant loop separate from the others.

[@Kaynee28]

"BOOM HEADSHAHHT CORSAIR" ~LINUS.

[@woutervanr]

Really interesting conclusion on this one, thanks Linus! I'll be sure to use enough fans and route my loop correctly from now on (or atleast try to).

[@magikjob1574]

LTT went from PC monitor unboxing to thermodynamic engineering real quick

[@s.i.m.c.a]

well...if you stack radiators not one below another, but nearby or add spacing between them, so heat from previous would not be input air input for another, it would have greater effect. otherwise it is just thermodynamic, you take the heat from the water to the radiator, heat the air and then blow the heated air to the next radiator and heating him, which will heat or cool the water depends what is more heated

[@andrewlonero8003]

Great video; that is some awesome data! I really like these more Science-y videos. They are some work to produce, but data speaks for itself and helps the whole community! Kudos!

[@FayeTheSuccubus]

Incoming attempt by Linus Media Group to acquire Gamers Nexus!

[@andy56duky]

Linus? Owning gamers nexus? Nah...

[@EastDallasKicks]

@@andy56duky bruh

[@EastDallasKicks]

Wait a non member peasant can comment under members?

[@KGalon]

@@EastDallasKicks yes

[@EastDallasKicks]

@@KGalon yes yes

[@ChilenonetoYoutube]

Will it help to put them side by side instead of stacking? each with a set of fans...? Sounds more effective to me!.

[@sarahjrandomnumbers]

The final solution to the watercooling question.

[@thomasmcelroy5785]

I love this and want more of this sort of rigor and detail in testing (though maybe with more of the explaining on another channel because views n such)

[@alexoherlihy4782]

Check out gamers nexus for less humour and more graphs and data

[@lagerhausjonny]

@@alexoherlihy4782 Was just about to give the exact same answer. Tech Jesus is always there to save the day with science.

[@lucasrem]

Thomas McElroy You should build a setup too, you have coding skills, need text files, or use some oracle database?

[@nottsoserious]

"All liquid cooling is also air cooling, and all air cooling is also liquid cooling" - A wise man

[@struanmurray2625]

"All cooling is just heating backwards." - A wiser man

[@Godielvs]

For those who did not understand, inside the copper tubes there is a liquid that helps to transfer heat quickly, and in the watercooler it is much more obvious, since air is forced into the fins

[@zeero4ever]

@@struanmurray2625 And both air and water are fluids, so all cooling is fluid cooling :-)

[@Geerice]

@@zeero4ever Not if you use radiative cooling

[@RNG-999]

@@struanmurray2625 It's not "heating backwards" Cooling is moving heat from one place to another. Nothing is done in backwards. Cooling is the act of heat (energy) moving from one object to another.

[@SpiritOfTheHeretic]

And if we connected each radiator in series and vented them independently (vertically or w/e), we'd see even more benefit. Still diminishing returns as the water approached air temps, but still better returns than each rad blowing air over the next. I'm glad you made this video.

[@zwz.zdenek]

I hoped you would test them in parallel water-wise.