Liqui Moly Oil Additiv MoS2 Does it really work? Friction test

Liqui Moly additiv molybdenum disulfide test
The test is to show how the addition of Liqui Moly Oil Additiv MoS2 to the engine protects the engine from scratches.
Sam pure Liqui Moly 4100 top tec 5W40 had the following result:
- 0.11 (sample 3.50) • Liqui Moly 4100 top te... and score - 0.18 (sample 2.92) www.youtube.co... = yWmlGVgqKQA
Liqui Moly 4100 top tec 5W40 with Liqui Moly Oil Additiv MoS2 has a score of - 0.09.
It gives us the following results:
- sample 3.50. 0.11 - 0.09 = 0.02
- sample 2.92. 0.18 - 0.09 = 0.09!
Summarizing:
Does Liqui Moly Oil Additiv MoS2 really work?
Yes. As you can see, it increases the oil's resistance to abrasion of the oil film - reducing metal-to-metal friction.
Summary of results:
docs.google.co...

[@marcusviniciusalbernaz.3040]

O motor do meu fiesta zetec rocam ano 2011 parecia pesado, coloquei o Liqui Moly Oil Additiv MoS2 e mudou de água pro vinho, o zetec rocam diminuiu 80% barulho e ta macio pra caramba, ja rodei 500 km, estou até agora sem acreditar que esta funcionado. Parabéns a Liqui moly.

[@filiplaskovski9993]

It’s amazing stuff it’s saved my motor in my wrx it ran really low on oil and the moly coating saved the engine it’s amazing stuff

[@jesusbautista3688]

Lo podrian poner en español

[@tomasnokechtesledger1786]

My Scooby witn EJ engine ran so low on oil that It didn't show in the dipstick. I May Have run like that by 400 Miles. I was running normally, no skidpading It or autocrossing. The Pickup oil got oil even that low. Now, If I was beating It, that should Have been the end of It.

[@marcusviniciusalbernaz.3040]

@@jesusbautista3688 Es algo increíble, salvó mi motor en mi wrx, ​​se quedó muy bajo en aceite y el recubrimiento de molibdeno salvó el motor, es algo increíble.

[@hiwamamin3882]

You best man in world thanks for working Great work

[@lion4422]

Спасибо за тест❗👍

[@Nightfly1957]

BMW 318is, BMW 528i,BMW 320i, BMW 125i mit "m-performance pak" und nun im BMW m140i -alle Motoren liefen/laufen ruhiger, besonders wenn sie kalt waren, hatten gefühlt eine bessere Gasannahme. Aber es reicht bei jedem 2. Ölwechsel das Zeug rein zu kippen. Denn der Trockenschmierstoff Molybdändisulfid sitzt bereits in den "Kratern" der Zylinderbuchsen.Wenn man sich so etwas unter einer starken Lupe ansieht, dann sieht es aus wie eine Mondlandschaft. Diese Löcher werden durch den Trockenschmierstoff gefüllt. Der Kaltstart ist auch besser, da das Zeug ein Trocken Schmiermittel ist. In meinen Autos ging die Öltemperatur nie über 125 Grad, vorher waren es 135 Grad. Ist gut für den Turbo, denn kalte Luft hat mehr Sauerstoff. Öl kühlt bekanntlich den Motor.

[@mocsok92]

Dear Piotr Tester! Did You recommend the MoS2 additive for Aral 5W40 High Tronic oil?

[@bjyuong]

I would like to ask you this, if I add mos2 to oil with viscosity 5w/30 will the mixture viscosity change? and how much approximately it will raise or lower (the viscosity)?

[@micinum]

No one knows 😂

[@4l5m6e1n]

Well I can tell you that I had 0w-30 oil in my car (3.8 liters) and added 300 ml of Ceratec (I imagine it's about the same viscosity as Mos2) and I had the oil analysed in a lab - the viscosity was right on point for 0w-30 oil. So it didn't change it significantly.

[@VxO4fame]

Seems to be less thick than the MoS2 from Mannol right?

[@tomasnokechtesledger1786]

You shouldn't do dry starts! At least cover the bearing parts with a light coat of oil!

[@LORDgregz1]

What would happened if you mix all the oils and additives at 1ml quantities to make the ultimate 0 Friction Oil.... Very Curious... Of the results...

[@darvaish4552]

Hi, i had chosen engine oil for E class diesel 2014. and your suggestion was superb, my car drives like a dream, its quiet and smooth. i was wondering if you can please guide me, if i can use liqui moly gear oil additive in my mentioned car? do you think that it is going to be a good step to take? awaiting for your reply, many thanks

[@luigiguerra3166]

Bizol 😍😍😍

[@magnusguntermann9198]

Wieviel Abrieb hätte dieses probestück wenn nur das liqui moly 4100 ohne jegliche Additive benutzt worden wäre?

[@SuperSaiyan_Star]

Concentration of friction and load is at one single point....Instead of needle try using plate....Spherical plate would be better to get similar condition like piston-cylinder....hope you understand... Please try it ASAP...I am waiting to see results... :P ;p :)) ;)

[@SuperSaiyan_Star]

Please note that there is Spherical plate or Spherical pipe of diameter atleast 10mm also the axis of both specimen and rotating shaft must be perpendicular to each other....I am waiting to see results...

[@TheBiarsamex]

So the final tecnical and well explained in detail conclusion is???

[@Domi9620]

Bardzo dobry wynik . LM- użyli molibdenu dużej czystości i od razu są pozytywne wyniki.

[@r.euribing5729]

Good job, Friend you can do the test with the Resurs remetalizer

[@unknownfacts7248]

hi, i want to know that if i use AMSOIL 5w30 for my diesel car, is there any benefit to add Liqy moly MOS2 in it, or pouring mos2 in amsoil will damage / worsen engine oil quality or no benifit .

[@rogeriosabeh6537]

Muito bom seus testes! Em que país são gravados estes vídeos? Qual a sua profissão/trabalho/emprego?

[@danielstifft2299]

O cara é da Polônia eu acho.

[@DibroTeam]

Hi, Can you test Barhdal B1 oil addetive ?

[@hilmisulaiman2427]

Ceratec and Oil Additiv Mos2 which one you think better?

[@PiotrTester]

Definitely Ceratec

[@hilmisulaiman2427]

Okay. Thank you for your opinion

[@michaborkowski8457]

Czy mógł byś sprawdzić jak chroni silnik w przypadku MoS2 w proszku po wczesniejszym rozmieszaniu w oleju. Taki proszek jest dostępny na allegro za 20 zeta. Pozdrawiam

[@PiotrTester]

Przyznam szczerze że nigdy o takim dodatku w proszku nie słyszałem... muszę się za nim rozejrzeć. Myślę, jednak że wynik byłby gorszy...

[@Lordhowe88]

kzbin.info/www/bejne/nInLqGRsh9J4hdE

[@hetmanqibaq327]

Piotr Tester można dostać go tez na ebay uk

[@Langloiswad]

Piotr Teste teste le mecarun p18 s’il te plaît

[@peterh8353]

your concetration is not the same as when added into engine... you did like 1.1...

[@SuperSaiyan_Star]

Maybe....But also concentration of friction and load is at one single point....Instead of needle try using plate....Spherical plate would be better to get similar condition like piston-cylinder....hope you understand... Please try it ASAP...I am waiting to see results... :P ;p :)) ;)

[@T4R3dneck]

Biggest engine wear is on valvetrain, not on piston/cylinder contacts. Second biggest is on bearings, the one you are mentioning only comes after those.

[@dominiksobieraj3229]

Ile obrotów masz na tym wałku zrób 3000 tyś a nie 11000 to nie bedzie takiego zrywania filmu olejowego oraz jaką stal testujesz bo straszysz ludzi niewiem czy to miarodajne jest jeszcze kilka razy powtażaj testnajlepiej na rolce z łożyska igiełkowego to zobaczysz czy zużycie będzie.

[@onuryagc4605]

Would you test smt 2 anti-friction?

[@maximilianlindner]

What's the song at the end, please?

[@robertoarroyo5925]

Hola buen día. Dónde puedo adquirir el Producto Liqui Moly?

[@sidurucmihail6680]

Здравствуйте скажите пожалуйста у меня Тойота Авенсис 2011 D-Cat и жерёт масло если залить в моторе один туб с аддитив именно такой помогает? Спасибо !

[@Rygick67]

Эта присадка не убирает жер масла!!!

[@ulisesvaldez3175]

I have a vw sedan year 1991 and I want to know what to use, ceratec or oil aditive? greetings from Mexico

[@PiotrTester]

Please, use Ceratec.

[@ademessamturkmen3886]

@@PiotrTester you are great man .. god bless you

[@kipmcmahan9714]

Painfully slow and uninformative! Where's the baseline with plain oil in which to compare? I won't watch anymore of your vids until you can speed up and clarify your results. Thanks!

[@PiotrTester]

Please, read description.

[@travispratt6327]

Project farm did a video on this, much more informative and better put together.

[@smartbikers4550]

is it good where is result.... can u talk

[@safaasafyo9557]

thanks

[@sdm.1980]

What about “Metabond “.. additive???

[@sandorfule6946]

Most ez mi volt? Akkor most mi van? Minek kellett volna történnie?

[@piotrkaczmarek6801]

Up to 5% of MoS2

[@salomon4001]

Chcesz sprzedać maszynę do testów?

[@kevin-jm3qb]

Anti-Friction or anti-wear test?

[@zeushualde5627]

anti friction equal to less wear.... thats a simple logic....

[@pana.2994]

Ιt really works !!!

[@luaymurad5239]

pls can u test protec additive ,,, engine nano protect ,,, its product from blue chemistry group

[@azmantarukk2260]

good or no sir...i want put in my car

[@PiotrTester]

In my opinion, it's better to use Ceratec.

[@azmantarukk2260]

Piotr Tester wow so fast feed back...tq sir...

[@dani_dan2023]

Y cual es la conclusión sin una comparación?

[@radeizazgrade7627]

Cera tec test

[@ruliusraulestevezvargas5707]

resurs????

[@specialistauto767]

Что за трек в конце?)))

[@damiansmigielski]

Ten test pokazuje jedynie, że ten dodatek w tym niemiarodajnym teście chroni wałek w tej śmiesznej maszynce. Nie wiem co to za parametr "ścieranie filmu olejowego"? Pewnie chodziło ci o ścinanie filmu olejowego. O ile oczywistym jest, że dwusiarczek molibdenu może zmniejszyć współczynnik tarcia, o tyle nie ma mowy o wpływie na współczynnik lepkości oleju. Warunki jakie występują w tym teście nie występują w żadnym silniku. Można spróbować to podciągnąć pod współpracę krzywki wałka rozrządu ze szklanką popychacza, ale to będzie znaczne nadużycie. Poza tym ten dodatek miesza się z olejem silnikowym w innych proporcjach niż w tym "teście". Podsumowując... bzdura.

[@user-ALBeRt-T]

Мракобесие

[@piotrkamPOZ]

Witaj, możesz podać nazwę podkładu muzycznego?

[@PiotrTester]

Wszystkie utwory na moim kanale są mojego autorstwa i nie posiadają nazw...

[@luaymurad5239]

amazing ,,, can u test protec engine nano protect pls ,,, best regards

[@PiotrTester]

Yes, I have this oil additive on my list. Please, be patient...

[@luaymurad5239]

ok ,,, waiting the test ,,, thanks alot

[@sniperghost1994]

And is it good ?

[@PiotrTester]

Yes, it's will be change your engine work sound to much smoother and quieter-) But in this link, you can find summary of rest better or worst oils additive: docs.google.com/spreadsheets/d/1fbb9qtL-yWlzDPLzvxzpF01gRRtH8fKxeVtXt6HPpgg/edit?usp=sharing

[@sergheilitvinov9951]

так что же лучше CERATEC или Oil Additiv MoS2 ???? а может есть что то еще КРУЧЕ ?

[@greencoffe]

полимериум 100% проверено на личном опыте.

[@user-ALBeRt-T]

@@greencoffe и что такого у полимериума есть ?

[@artartser88]

Что за трек?

[@latifesmer7251]

Bor power oil additive?????

[@PiotrTester]

MoS2

[@sukhoi3535]

@@PiotrTester you recommend to use Mos2 protection engine high mileage?

[@kwstakisGT]

Καλησπέρα φίλε μου είναι καλύτερο από το souper dynamike που βάζω εγώ αυτό που βάζεις εσυ

[@Limou551]

Molibdenio puro submicronizado funciona melhor.

[@diegosabbadini6237]

Maxengines Tech como assim molibdênio puro ?

[@user-ALBeRt-T]

И где его взять с такой фракцией ?!

[@djschabowy3]

To może liqui moly motor protect?

[@MaoWatt]

djschabowy3 dołączam się do prośby

[@sudano6]

Mozna to jakos odzobaczyc ?

[@PiotrTester]

Przepraszam, można jaśniej?

[@gumelini1]

Did you know that you can speed up parts of the video?Because we dont have time to watch a bearing spin for entire 5 minutes!

[@DanyWay]

Dude, you don't know how to skip 5 or 10 sec on mobile/desktop?

[@gumelini1]

@@DanyWay i don't like skipping, because i usually end up skipping back

[@selmighaith1831]

Km number of oil 5w40 ?

[@PiotrTester]

Sorry, but this oil isn't available in my country... If you want you can send it to test...

[@selmighaith1831]

Piotr Tester ok thnk

[@avecesdigolaverdad]

so it works or not ?

[@PiotrTester]

Yes, it works, but not so good as I thought. There are a lot of oil additive which give better protection than this oil additive.

[@tanvirhossain2354]

@@PiotrTester which one is better than this oil additive

[@robertoarroyo5925]

O bisulfuro de molideno vivo en gpr n l

[@18__cm]

трек

[@duchtdixon894]

In poche parole non vale un cazzo