LISEGA Constant Supports - How To Adjust The Load

This video explains how to properly adjust a LISEGA constant spring load in the field.

[@abaskaraji8283]

بسلام برنامه یوتیوب را دوست دارم امیدوارم روزبه روز بیشتر از دیروز باشد مچکر ممنون

[@josealbertopotencianoavalo3985]

TENGO DUDA EN CUANTO A LA CALIBRACION DEL SOPORTE MODELO 11

[@LISEGAIncUSA]

If you have specific questions or would like more information regarding type 11 constants, please feel free to email us at [e-mail]. Thanks!

[@AMerGogogo]

Understood this video.. My question, how to know when to adjust the load using those two bolt and why not adjusting using the turnbuckle. Thanks in advance

[@hunny1400]

Basically the load adjustment bolts are intended for high variation in load change with minimal deviation in load point elevation. When minor correction is needed with respect to altering the load point elevation along with slight deviations in load is not worrisome, it should be tried with turn buckle.

[@LISEGAIncUSA]

The red and white marks on a constant force spring show the calculated hot & cold POSITION of the spring. The marks do not indicate the load the spring is applying. The LOAD the spring is applying on the pipe remains the same throughout the entire range of travel (this is much different than on a variable spring). Changing the dimension using a turnbuckle will only change the position of the pipe, but not the load the spring is applying. Changing the position of the pipe will shift the pipe load to nearby springs. The only way to change the load that this particular spring is applying is by using the two load adjustment bolts.