Little bit of service work to the 6' X 10' triton trailer

[@jasonbush8148]

I like that air nozzle. I have one similar to it but it doesn't have the gauge on it. Have a good day!

[@garretts91]

Bill, about those gate locks.. It wouldn't be a bad idea to drill straight through the gate and install longer bolts with a hole on the end for a quick release pin. You could then close the arms onto the bolts. To stop any play you could measure in polyurethane or rubber bushings to put into the arms. That would last a lot longer and be less of a pain.

[@stevenfreeman6852]

First thing is hi. Second thing is a bit of a compliment from my wife. After hearing you a bunch of times, My computer is in the same room as hers so she can hear your videos but not see them, she finally got to see your cemetery. We drove around on Monday morning and she said it was amazingly well kept, and she wishes people in Delaware took half the care you seem too.

[@billstmaxx]

Sweet Thanks :)

[@curtschmidt8218]

look forward to your videos every day keep it up

[@billstmaxx]

Thanks Curt

[@regsparkes6507]

That's a nice looking trailer Bill, maybe you could check with Princess Auto,...did I see those trailer wheel sizes on 'sale' this past flyer ? I have a question on the trailer's jack, why is the jack bolted to the outside of the left 'A Frame" draw bar and not installed down through it, as there's a cut out there for a jack ?

[@billstmaxx]

im not certain on that one. more clearance when you flip it horizontal i suppose

[@regsparkes6507]

Yes, I suppose that could be it,...Thanks for the reply though.

[@stevendrake1251]

Reg Sparkes I love my Lock n lube. have it on a Dewalt battery powered grease gun. fast daily lube on my tractor loader and trailers.

[@regsparkes6507]

Hi Steve, yes those are a slick little invention aren't they? They're great for those hard to reach places, especially.

[@glenjohnson5778]

If people took half the time with their stuff, as you do, things would last a lot longer!! love the vid's

[@billstmaxx]

Thanks Glen

[@michaelmactavish1728]

yeah miss iron man vids lately long time seeing vids from good ole ironman

[@taylorfarmstbn]

just a question bill what about using a post hole auger to did cremation holes

[@billstmaxx]

yes I have wondered that too but when you dig where there is already someone you have to be careful and the soil would pile up around the hole so you would have to remove that as well

[@michaelmactavish1728]

i been looking at some at my faviorate store princess auto :)

[@ryanfernald8510]

Hey Bill just thought I'd suggest for the brackets on the trailer, Have toy thought about either welding or bolting on a couple of handles to grab ahold of and to pull on? itll save your hand for sure Just a thought

[@billstmaxx]

for tying to?

[@ryanfernald8510]

At 4:25 you talk about not liking the holders for the tailgate, that's what I was referring to

[@ryanfernald8510]

To be able to pull on the handle instead of cutting up your hand on the steel of the trailer

[@BergyVlogs15]

great video again bill keep up the great work! from a Fellow KZbinr

[@67697072]

Don't lend stuff to relatives........ever !!!!!

[@hussietart]

Mix up used motor oil and diesel fuel 50/50 and treat boards in trailer.

[@CashJohnston]

For years you've been asking "how's she going today tubes?" And I just thought I'd answer for once. Pretty good Bill. Hope she's going good for you too!

[@billstmaxx]

SWEET! :)

[@ChucksBasix]

I have gone through several of those inflators with that clip on style fitting... Amazon has replacement ones that screw onto the valve stem instead of clipping on. If the one on that is removable, grab one of the screw on style ones. Even the better ones from Milton that use the clips are better as it uses two clips on opposing sides to hold the fitting down. The issue with most those air guns though is the insert inside them that is supposed to make the seal. It hardens up quickly and the single clip just can't hold it tight against the stem.

[@mikeshearn8925]

Pump it till the piston is about half out.

[@rtesimpson]

Pretty good here too...

[@GeorgeGardinier]

my friend and i ask the children in the car, how many dead people are in that graveyard. they are hard pressed to answer the question, ha. of course, you have asked

[@RoanJS]

Would Armorall tire stuff work on those grommets?

[@billstmaxx]

may help keep them from cracking yeah

[@wyattramsey1198]

you should do a cold start on the Sportsman

[@mikeshearn8925]

Grease when the bearings are cold. Not after driving.

[@billstmaxx]

They were cold. hooked it at the house and brought it to the garage

[@throttlebottle5906]

scummit-racing... I have the joy of living 12 miles from their ohio store, which means it's far too easy to keep to keep wallet empty :)

[@nojo1099]

nice

[@marklockwood2146]

Dang bill too much work but it a job

[@alantschirner6063]

Bill, here is the ultimate tire inflator: www.amazon.com/gp/product/B002PUTC0M/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 It's a little pricey but you will only cry once.

[@billstmaxx]

Thats really nice

[@Storm-dy3jy]

hello

[@huntercampbell765]

Second

[@tyresechilds6717]

third