LIVE Will It Run 1957 BMW Isetta | Raw & Uncut | The Good, The Bad, And The Locked-Up | RESTORED

[@RESTORED-HOPE]

Watch us get her running!! Live Part 2 Here: kzbin.info/www/bejne/rquVXoWsgtGKbc0

[@shartne]

Wow you guys do lock downs in Texas I thought they wouldn't put up with that hoax down there? Its just the dang flu. 100 percent recoverable from.

[@kevinshiley9061]

I'd run some kersene through it to clean it out. Then run some oil through it!! Some PB or auto trans fluid in the jugs.

[@carolerodeghiero8157]

Take the engine out and do a rebuild

[@carolerodeghiero8157]

Let's you know what not to do with an engine

[@carolerodeghiero8157]

The value would be fantastic if done right.

[@sarawilson1404]

I like that y’all don’t give up easy

[@aftershock2222]

I find engine tear down and start up vids very entertaining. This is one of the best. Thanks!

[@richardnewman8983]

Love you guys I am disabled and have mental health issues so appreciate having something good to watch. We too are on Lockdown here in the United Kingdom 🇬🇧 Keep up the good work farther and son team your amazing Thank you so much from the bottom of my heart ❤️

[@donaldgiglio6501]

Hi! My name is Don Giglio (Jill-Leo) and this is how you say my name. But anyway I have been watching your video's for a while and wanted to let you know how much I love what you and your dad do together and how well you do it. I'm 75 years old I spent 16 years in the Marines and after that I did body work, drove tractor trailers and tri-axel dump trucks. And built old trucks for car shows. So I know just what you guys go through when you get a junk car or truck. Been there done that. Well anyway I just wanted to say HI!! Keep up the great work.

[@rosshemming1347]

We are so sorry about your uncle we were watching the day he passed you know he went to heaven we keep praying for all of you

[@mikey1494]

Everytime I watch your videos it's like I'm right there hanging out with y'all. Never lose your drive to film and post, absolutely look forward to them everytime. Love ya guys! God bless

[@vinceheavey54]

I knew along time ago about 6 volt ba 12 volt systems. About starters and flywheel systems .about intake and out put systems

[@SoY_7]

I love how this garage promotes true Christianity. I'm so happy to see this channel thriving.

[@thomasbrighton6159]

The longer I stared at that rig the more I think it should be turned back into a micro truck! I love the 3 axle look !

[@walterrobbins4470]

For future reference, you can put a jack stand under your extension to keep it from sagging and keep the socket square on the bolts when you put the twist on the ratchet

[@jerrythroneberry1378]

You guys are an awesome family, love watching mechanical adventures. So sorry for y’all’s loss. May God heal your hearts. God bless!

[@anthonycurcio5018]

i like watching you guys getting cars back to live after 50 years.

[@kathleendefrankjr8485]

You guys are never boring I love watching you and the patients that you have when working on things if it were me I'd be throwing things saying bad words but I but I love watching you guys keep up the good work and thanks for giving me something great to watch love to see you guys restore the old stuff

[@dannyavitt2553]

Put oil. In cylinders then spray all bolts. Then blow it off

[@jimreel7721]

Howdy you guys from Southern Oregon. Love you guys . I must admit you all will work on anything. That's what I love about your videos . Great to see you guys , and God has surely blessed you. Keep those videos coming . Lock downs arent fun , but you guys make it go alot better . May God bless you and yours forever.

[@chrishamblin2774]

You guys rock . It is refreshing to see and hear good talk and no colorful language , praise God for you . You are Great

[@generalconservativeviews4878]

Hi from Iowa…all of you are so big-hearted and work so well together.

[@rosshemming1347]

This was nice to spend time with all of you prayers all around(ross)

[@dockmasterted]

That engine is just a boat anchor my friends!

[@joelmason8464]

I don't know if I'm the only one that thinks this but it's not a rush when you have something as what you're trying to do there it does take time it's the effort that you put into it that makes it worthwatch so take your time figure it out make it work don't break it with what you have is worth money

[@dariandareyawasmer6074]

Throw the other motor in it, bed with rails... A ramp on the back would be perfect. But to be quite honest I'd probably throw the motor from the white one into the one at the other shop. Get one runnin at least. (I'd probably get rid of the middle axle on this one too, she'd look better.) Thanks for the show guys!

[@allensnearlysrandomshorts]

Seen this car on market place yesterday not gonna lie it looks really cool

[@131dyana]

Nice to see you and your Dad working on a project again.

[@wedding4016]

I enjoy your clips from Saudi Arabia to benefit from how to deal with old car parts and I always apply them to my old Nissan Jeep. I have benefited and learned a lot, so I thank you for that. I wish you would give the father a chance to talk a lot, for sure he has a lot of experience. Keep it up

[@walterrobbins4470]

On a stuck motor, the best thing to add with trying to turn the engine over is vibration. I’m not talking about using an impact wrench. A weak air hammer rattling around at different locations on the block will often get things to let go.

[@CajunGreenMan]

I was there the whole time and enjoyed it. Would still like to see the engine broken free at least. I suspect too much will have to be done to it and too many parts replaced to make it worthwhile getting running before you sell it. Keep up the great work!

[@johnpaice8481]

Hello from the UK u guys are inspirational during these horrible times of lockdown bless u all .

[@TorbenSchytt]

Hello from Denmark Youre are great inspiration - love the way you tackle and guide us through each new project. 😊

[@neilgillam9919]

that there is a 1760cc type 4 engine fitted to the vw bus and type 25 mini bus. Also fitted in the varient and notch back cars. the oil dipstick tube is in 2 parts with a long thin oil dipper. you are missing the top half of the tube and the dipper.

[@bankchan2692]

MY Dream Car

[@jaysloan544]

Thanks for sharing . I enjoyed the live feed. Would like to see another one. Be safe guys , stay healthy.

[@davechampagne9697]

Okay I looked up the part number for a 1955 isetta. NAPA's part # is ECH CS88

[@jamesmccarthy1961]

2 hrs is a long video! But spending them with you guys they just flew right by. Keep up the great work guys and young lady. Always looking forward to the next video. Take care Jim

[@nickstafford9736]

enjoy watching you guys have a blessed day

[@pear7777]

Just keep on working on it, and keep us posted!

[@johnmahia9253]

put a jack stand to prevent the motor twisting, so as you got something solid to fight agaist , trying to turn motor,

[@timothybrault2120]

michigan here

[@antarbanks778]

cool car

[@scottanderson7718]

Of course I'm hanging out, because I'm hanging out with my friends watching them work on very neat and cool vehicles, and have the opportunity to see what it will take to bring them back to life where they deserve to be.

[@walterrobbins4470]

Even though the ryobi didn’t get it to turn, the vibration helped a lot

[@swebirdy]

one tip ive used when an engine is sitting for longtime is to dismount all sparkplugs empty all oil if any put back the drainplug then fill the engine upp with diesel and spray all moving parts with diesel even fill the cylinderhead thru spakplug holes with diesel and let it stay a day or two then start to turn i around with a tool. it worked with success every time for me. love to put old engines back to life. ( funny just when i wrote the tip of diesel you are doing it. )

[@danielheartsill4269]

I had a early 70's VW squareback, (station wagon) that had that engine in it.

[@reclinerdriver1489]

Toilet bowl cleaner , LRC ,, meuratic acid in small amounts mixed with a bit of water ,, white vinegar . stuff with mild acidic properties but also strong enuff to dissolve rust and scale deposits .. Cleans cylinder walls,, pistons and rings . dissolves carbon and aluminum corrosion .. then let soak a coupla hours depending on strength of solutions .

[@joelmason8464]

Plus you're getting time to spend with your wife and your dad and show everyone what you're willing to try to do that is awesome not worried about no lag here honesty you have

[@thomasmacnicol3245]

PB BLASTER!!! soak over night in the heads & in oil pan, fill it up,let it soak. then vibration, then heat.

[@BRI33NOR]

Many years ago when the world was young and the BMW Issetta was current in Europe we took one of the standard close coupled four wheeled ones. Counted as three wheelers for tax and registration purposes that way. Removed the standard single cylinder engine set up and fitted a Triumph 650 twin, it looked basically standard still from outside. Hell of a thing to drive and surprised many souped up cars away from stop lights etc.. Eventually the obvious happened and it destroyed itself totally. Driver and passenger survived somehow.

[@sladeyuille7047]

The 55 BMW is still a very well known vehicle here in Melbourne Australia and for you guys that have one that has been modified with a VW rear end makes it more interesting and I am sure that you guys will make it a running vehicle.

[@winfordtice1969]

Put vinegar down the spark plug holes. vinegar eats rust and does not heart any metal serves or aluminum serves.

[@appostbs]

Keep Messing with it!

[@papajj3]

Another youtube show I follow is Count's Kustoms.: Las Vegas Custom Hot Rods & Choppers. They are more high end but the owner does like Caddy's and he will take the shell of a car and build it into a custom street rod. You should look him up.

[@rustedratchetgarage6788]

Pour diesel in plug holes and leave it soak then drag it about 45 and dump.the clutch in 2nd

[@shawnmanck1327]

The motor is from a squareback or a fastback. But is basically the same block as a beetle. But has a different hole for the dipstick.

[@WalksInThunder]

Wild lookin German highbrid

[@aviavi7904]

תעבוד על אותו😂😂😂 שבוע ימיים

[@np1584]

Amazing channel, been slowly working through your videos the past 10 days. Sorry to hear of your loss. Sending socially distanced hugs from Scotland

[@ruthiegobbi3031]

ALL YOU GUYS ARE AWESOME, WHAT A CHALLENGE,

[@paulgokey2576]

two products which are better than anything you have used. kroil penetrating oil which will go where water won't go. It will go into a space one millionth of an inch and dissolve rust on your rings. Second one is Gibbs penetrating oil . Gunsmiths use these products and they work. Check these out on you tube. Will save you a lot of time

[@earlcollinsworth4914]

Check out Family Matters as character Steve Urkle drove an Isetta.

[@kevinsullivan1780]

Very sorry about family member. He is in good hands now and forever

[@ABANDONEDCARREVIVALS]

That motor is out of a type 3 or 4... squareback, notchback, 411 etc... I've had a few myself

[@zundfolge1432]

type 3

[@thomasmacnicol3245]

your on the right track let it soak then more vibration.

[@corneliuspienaar7208]

She will run, Hi to you all, GOD Blessings upon you. I am from South Africa

[@tomkimbrel4192]

Diesel Fuel or ATF down spark plug holes, also in crankcase.

[@yoshinoyajones8924]

On the typ 3 the dipstick part on the block is a bolt on part unlike the regular type 1 and 2 case, where it is cast in the case.

[@jacklzweifach5312]

I'm bored I just enjoyed watching you guys go back and forth hope you can get it running

[@markusher9975]

Enjoyed the partial tear down.

[@hp25racing]

this would be a cool rig for a go-cart track safety rig / tow rig.

[@donsinor1713]

Love these types of videos. Can’t wait to see the truck build this winter. My dad was a paint and body man his whole work carrier. Painted a few myself.

[@study650]

Great video. Missed the live action and it's 20 hours later. It would be cool to put another motor in it and restore back to a truck. Whatever you do, I'll like it because I like everything you guys do.

[@josephpilosky4775]

Missed the live stream but you GUYS are great

[@josephatkins6581]

Craftsman makes the best knee pads

[@theoldman8877]

Dirt, how did it get in there? A nabor parked his Cattapiller for the off season. His three boys and two boys that lived close by. Filled the hydraulic tank, diesel fuel tank, gas tank, crankcase, transmission and radiator with sand from the dry creak bed . Aren't children just wonderful ! ?

[@Nobby1965uk]

love the videos keep them coming would be great if you had a ceiling camera facing down so we could see a lot more from above

[@gregmeo1187]

PB blaster is the answer

[@StephenHort]

Love the show I watch all the time good bless to your family on the loss of your uncle

[@archielynn3663]

STUCK CLUTCH DONT THINK SO

[@mrfatbobrider1969]

I notice part of the flat bed stell is fom crash barriers on the road side they are what the guard rail hans off ..called nucor posts..at least that's what they look like..very brittle and made to bend then snap to help absorb the impact. Just a little thing I had noticed. Cool content guys Dion New Zealand

[@miltonhopper2932]

You could do an engine swap and put a stakeside wood flat bed on it.

[@edwardwinston9432]

put some heat to it that always work

[@larrytucker2938]

Try a socket on axle along with crank. Maybe get a prybar in to flywheel teeth. Fill cylinder with propane, light with long match😝.

[@chrishamblin2774]

Our condolences for toyr Uncle Franky .To you Wyatt so sorry for a direct loss like that .we Pray for yall and that the peace that passes all understanding be with you. Lance ,you are a wonderful Man, uncle Franky to you was like my uncle Gene .Super Special and you always enjoyed being with them as well. ❤Peace to the whole Family too. ❤

[@orenhicks1051]

That is a wild looking ride.

[@larrysmith6682]

Well, I'll be here as long as you are. As a retired mechanic of over 50 years this kind of video is interesting to me.

[@kevinwhipple8041]

I like watching you working on things, keep on doing what you do, have a great day.

[@davidthompson1707]

its half past 7 here in northern ireland keet going you will get it

[@donbeightel6505]

Put a pry bar on the ring gear you will have more tork

[@timballard2038]

Thank you guys enjoy watching you guys is really awesome God bless and hope and your family is doing good

[@041bubba]

Awesome job, Ya'll We are locked down here, too!

[@joeycribbs713]

Bless you guys thanks for showing your knowledge of old cars & trucks and your faith in Jesus Christ .

[@timothybrault2120]

hi guys good to see you guys at it again

[@patrickstranathan1682]

I think that working on old car's is interesting just to see if they will run

[@jonah8961]

Great idea on live will it start

[@spyridonnotidis3392]

A little less talk and get to work I like to see this bucket run unless you like to hear yourself talk. despite that,I will still watch your videos because you are a bunch of nice guys.

[@richardnewman8983]

Still watching from the United Kingdom 🇬🇧

[@sherrybelford8698]

So sorry for your loss

[@alfredharmon2014]

Sorry for your loss love the channel

[@stevenather872]

great to see you guys back sorry for your lose keep the faith keep up the good work thanks for the great videos from Steve in vermont

[@boozerboozer636]

That is a Bubble window style so it is a 1955 or 1956. 1957-1962 were slider style side windows. Cool project.

[@russelocampo2034]

Father and son its cool....👍👍👍....God Bless you both and your family sir...👍👍👍

[@leroymiller5205]

Place a floor stannder under the ratchet and extension as you are trying to applying pressure on the crankshaft.

[@ianhodgetts8266]

Tell me guys, what was with the name change of recent ! found you again after you dissapeared, but, they were not you guys. found your new name purley by accident, just glad that i found you again. i ve heard that others have had an issue with youtube and have had the same issues. good to have you back

[@Briancollison]

would be good to see it restored and running as it is.

[@OFFICIAL_MODBOSS]

Pb blaster is a great penetrating oil might help a feller out in the future with getting a seized engine spinning