Renault Trafic 3 genuine cruise control retrofit! Including coding!

Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
I was requested to retrofit cruise control on this van, a 2014 Renault Trafic 1.6 dci.
Follow me on this video to find out what you need and how to do it...
How to replace the clock spring / squib:
• Replacement of the clo...
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching!

[@thepenrice1402]

Great video, didn’t know this was possible and now I have cruise control on my 2015 Trafic! Had to spend £50 on a new squib though as I damaged the air bag connection whilst removing the old steering wheel, nightmare! £300 overall and now I’ve got cruise control, thanks again!

[@LMAutoRepairs]

😊 That's great! Thank you for watching and for your comment! 👍👍

[@MarekSzymanik]

Content 100% knowledge and good approach to deal with issues .!

[@LMAutoRepairs]

☺️ Thanks! 👍👍👍

[@peterprice8393]

Hi My friend you did call it right !! . Changed the clock spring and my check cruise control and check speed limiter fault has gone and the orange and green lights have returned to my dash . Replacement part was not cheap but all now working thank you so so much for your help.

[@LMAutoRepairs]

☺️ That's great! 👍👍👍

[@danielnilsson6484]

Hello! Tanken you for the information. I have changed the steering wheel and programming with RenoLink. But I get message Check Speed Limit / Check Cruise control Is it the spring clock that causes this? Which spring clock I need to buy? From a later model with CC and SL?

[@peterprice8393]

@@danielnilsson6484 hi yes you will need the clock spring from a van or captur that has cruise control as it has more contacts in it that are required for it to work . Check out your local vehicle breaking yard as much cheaper than buying new .

[@robertszeffler2190]

In my case I had to changed clock spring and cruise control works!:) thank you so much for all help and great video. Even me amatour who has never done any coding managed to do it thanks to you

[@LMAutoRepairs]

Not a problem! Great you got it done! Thank you for watching and for your comment!

[@eoinmcl1354]

Hi Robert . Have you part number for the correct clock spring?

[@garymardle]

Hi. Did you have to change the clock spring as well as added the CC switch and the steering buttons? I have retrofitted the CC switch and steering wheels buttons and it is not working. Cheers

[@robertszeffler2190]

Yes I did I changed it and then coded the van

[@alicanyazgan]

Hi What's the clock spring part number many thanks

[@TheSkyline35]

Thanks for the content, it's all I needed ! Good news ! I'm currently adding the CC on a Sandero 2. It's the electronic of a Clio IV and so very close to yours. Same push button and configuration as here. Sadly, the default rotor spring lacks the CC cable so I just bought one. I tried to Enable CC without it (just to know if the car would accept it) but the steering wheel button state is "Open Circuit", therefore the ECM doesn't permit the CC option to be activated, make sense, 5v and 0v are considered "Open Circuit" by the ECM, apparently the 4v value is required to enable the CC option. When I will finally plug the steering wheel I will give my feedback to help future people ;)

[@LMAutoRepairs]

😊 👍👍👍

[@CorteZPKP]

If the vehicle is equipped with start stop ,you will have for sure 2 clutch switches.The clip for this newer model is useless to activate something,because all the configuration will be made online with a configuration file specific for the options from factory.The bad part is,if they replace the ecu or instrument cluster at renault it will be configured without cc/sl.Very nice video ;) keep up the good work

[@LMAutoRepairs]

Hi Correct... I told the owner that any of that would revert the changes back... Thank you for watching and for your comment! 👍👍👍

[@tigerbalmgaminghd3872]

Great that you got the CC working. Also nice that the car was pre wired.

[@LMAutoRepairs]

Absolutely... Thank you for watching and for your comment!

[@xwolle]

Top, hab es mit dem Video auch umgebaut bekommen. Beste Erklärung 😎

[@Schlumpfhausen]

Welches Baujahr hat ihrer?

[@ionvisan4375]

I use for my 2015 Vivaro a kit from Precision Cruise Control and is working perfect easy to install no need for code changing.

[@LMAutoRepairs]

Yes, there is other options out there... at various prices...😬 Thank you for watching and for your comment!

[@CANDiagnostic]

Great vid again Luis you sure like these Renault's!

[@LMAutoRepairs]

🤣🤣🤣 I love the French! 💃

[@MrRiderHD]

I done few of the cruise control installations,mostly all on Renault,older models from 2001-2009 would need clock spring to be changed since they would not have connector in clock spring for the buttons,and some of the later models would not need activation over Clip,but they would require additional switch on the clutch and the clock spring,and most of them were all prewired,Can Clip can activate Cruise control on newer models but it requires a newer version of Clip,for Renault Clio 2014 I was using v174,and it was under UCH/Write configuration,and simply just switch that to With Cruise control,after clicking on confirm in the Clip everything was working just fine.

[@LMAutoRepairs]

I confess I am running a lower version of clip as well, need to get that updated as well... Thank you for watching and for your comment!

[@Oockeshoek]

Did you do any install on cars without the switch being prewired? My Twingo for some reason comes without it, already have a steering wheel with buttons and I’d be able to get a clock spring easily

[@hissnainzabir3711]

Where u based

[@Venom1985UK]

@@LMAutoRepairsdo you know if all mk3 models of Trafic have factory wiring from your experience? Models like business and business+

[@LMAutoRepairs]

@Venom1985UK Wouldn't be able to tall... this one was the only one I have done... 😳

[@CarsExposed]

Awesome job mate thumbs up from me 👍👍👍... I love my cruise control i couldn’t live without it 🙌🙌🙌... I hope you didn’t get caught by the van 🤞🤞🤞

[@LMAutoRepairs]

Thanks Igor! For watching and for your comment!

[@125sm3]

Great stuff alot of vehicles have the wiring behind blank buttons. I think is saves the manufacturer money. I wiring loom for all .

[@LMAutoRepairs]

As well... thank you for watching and for your comment!

[@markkarm9253]

Thanks a lot for this video man ;) cruise control now retrofitted in my movano B thanks to you.

[@LMAutoRepairs]

That's great! Thank you for the feedback!

[@paulmayou370]

It looks like renault have taken a leaf out of fords book by having pre wired the van/car great work as always buddy

[@jusb1066]

back in the 80s i had a base model skoda, didnt have door switches for the lights, no side mirror, no rev counter, went to a scrapyard (and it got out again lol) took some bits off another car, all the wiring and screwholes already to go, my old fiesta had the wiring and the rear speakers, i could have upgraded the stereo easily too

[@LMAutoRepairs]

Thanks Paul... To save costs, not all manufacturers do that though.. 👍

[@prodiesel4773]

Nice job man !! I like this type of videos :) keep the good work

[@LMAutoRepairs]

Thanks! 👍👍👍

[@johnnySE]

I'm about to do the same on my Trafic 2015 9-seater, also prewired. DDT4ALL is The program you need to activate CC and other things on Renault.

[@LMAutoRepairs]

Clip does quite a lot... for the more intrinsic things, I use renolink... Thank you for watching and for your comment!

[@alessioriso9671]

Hi Johnny, Do you know if it is possible to use DDT4ALL for activating CC on Dacia also? I have a Logan and the parts look the same as in this video, but it don't know the right code for CC in the program for my car

[@garymardle]

Hi. I have done this same retrofit cruise control into my Renault Trafic 2017. 1.6dci. But unfortunately it doesn't work prior to coding. I had it plugged onto diagnostic at a local garage but they were unable to turn it on. Any help would be greatly appreciated. Cheers

[@Schlumpfhausen]

Did u fix the problem ?

[@nicolarohrbach8197]

Hi, i installed the original stearing wheel and speed limiter bottom switch. in the video where you talking about renolink you where mentioned the crouse control worked perfekly whithout showing it. mine didn‘t work but not used renolink already. thanks for the help

[@LMAutoRepairs]

Not sure what I was supposed to show... Yes, worked perfectly... You need to code the cruise control, and yes, I have used renolink... 👍👍👍

[@peterdiertens]

Nice to see you get it working. I have a question - my 2010 Renault Kangoo is rather basic, but has the CC wiring (plugs and CC switch on clutch) Looks like all your coding efforts were not to get the Cruise Control working but to display it correctly on the dashboard, am I right? [edit:] never mind - on other comments I read that I need to do some tricks on the OBD plug in order to get it to work, just wiring and switches are not enough. Will have to find a Renault shop that is willing to do this, probably hard to find. And also, my airbag warning light keeps on - need a new clock spring for that. Will order one on ebay

[@LMAutoRepairs]

😊 👍👍👍

[@DMR_Mechanical_Services]

Good information in this video!! I have a problem with a cluster showing 0% adblue when it is full. Do you know if renolink can remove the adblue percentage from the menu in the cluster? Many thanks

[@LMAutoRepairs]

Not sure as I never had that issue yet... But I would guess might need some sort of a reset... 👍👍👍👍

[@ricardoantoniocardosodemei920]

Thanks from Portugal

[@LMAutoRepairs]

☺️ Obrigado! 👍👍👍

[@andrevidal5762]

Hello. My 2015 twingo already have the limitor but doesnt have the cruise control, you reckon i only need the cruise control button? Thanks

[@LMAutoRepairs]

Plus the coding... Possibly... never done it... Thank you for watching!

[@zak636]

Tried this on my 2018 renault trafic has all the wiring for steering wheel etc installed new steering wheel went to install button on the left and no wiring is there ? Any ideas

[@mikbac2731]

Awesome video in great detail. Much appreciated😉👍🏻. Could you please give me a clue, if you happened to know what sensor controlls the low pressure fuel pump in a K9K 608 1.5 dci? Mine runs constantly with the ignition on...🤔

[@LMAutoRepairs]

Not sure if there is one... at least not from the top of my head... Thank you for watching! 👍👍👍

[@tamhamill5274]

Hi ive a 2015 trafic mk3 1.6 and i have installed the wheel and button just like shown in your video , great vid btw 👌🏼 , but how do i code in the Cruise control to make it work is it renolink u used to code it in to work thanks

[@LMAutoRepairs]

As per the video... yes, renolink did the coding... 👍👍👍

[@Costy88031]

Where are you based, I want the same for my 2015 Renault Trafic

[@tomekkoks21]

Hi any idea why cc not working on last gear and how to fix it please help 😢

[@supergonzo4]

I did this retrofit in my 2015 trafic , works as a dream . But at 120km/h i've got now speed warning. Annoying melody play every few minutes . How to turn this off ?

[@LMAutoRepairs]

I never went above the speed limit...🤪 Joking aside, I never really tested it at those speeds, the owner never said anything... check that there is not any limits set on the cluster or ecu settings... 👍👍👍

[@romannahar6729]

Hi, i have 2011 renault trafic Ll29 Sport dci without cruise control, but it has a cruise control light on dashboard is it possible to add cruise control to that? Thanks

[@LMAutoRepairs]

Possibly...

[@jarnoob]

Any idea on how to enable retrofit cruise control on laguna III? I've been fighting with it for hours. Enabled cc with renolink in instrumentcluster.

[@keyherobln]

somebody ever has oem pdc park sensors retrofitted on the trafic? i connected the button the loom was there but cant find the place to put the controlunit is it in the rear or in the front?

[@LMAutoRepairs]

I think is at the back, above the NS wheel arch... 👍👍👍

[@adrianlamch4984]

Hi, I saw that you also install sat nav rather standard single din radio. Is it a lot of hassle to put that in?

[@LMAutoRepairs]

I didn't install it... Van already came with it.. Thank you for watching! 👍👍👍

[@thomasbronts]

I got the same problem, the clock spring is the problem. Exact the same problem.

[@LMAutoRepairs]

In the description there is a link to a video on how to replace the clock spring... Hope you get it sorted... Thank you for watching and for your comment!

[@jusb1066]

speed limiter has a switch on the accel to bypass if you floor it

[@LMAutoRepairs]

I know that now. Thanks!

[@Honzakosakkk]

Hi what version of reno link you using? iam trying to do the same but don't have the option on the 1.99 version thank you.

[@LMAutoRepairs]

I can't remember now... but I am pretty sure I was using 1.72 or 1.73... something like that... 👍👍👍

[@electronic7979]

Very good video 👍

[@LMAutoRepairs]

Thank you for watching!

[@nemanjadzombic6101]

Thank you for another great video!!!

[@LMAutoRepairs]

Thanks! For watching and for your comment!

[@Γιάννης-φ7τ]

Hello sir. Do you know with which program i can activate cruise control for Opel Vivaro 2015?A technician tried to do it but failed. While CC was activated by the program, the activation button did not work. Is there any detail that escapes us? Is the process the same as Renault Traffic? Thank you in advance!

[@juliuszilys1175]

hi,renault master Not working cruise control, 1,2,3 gear it's working, 4,5,6 doesn't work, can you help you?

[@LMAutoRepairs]

Have you scanned the car? Have you checked live data? Thank you for watching and for your comment!

[@juliuszilys1175]

@@LMAutoRepairs just scanned, but nothing.. sorry is yours post code Basingstoke RG24?

[@richardbrown8427]

Hi. Thanks for the video. I did wonder if it was possible. What software did you use to activate the cruise control. Many thanks.

[@LMAutoRepairs]

Renolink... Thank you for watching and for your comment!

[@richardbrown8427]

@@LMAutoRepairs have you ever retro fitted auto lights and wipers plus fog lights to a Renault trafic mk3 business?

[@LMAutoRepairs]

@@richardbrown8427 No... have not... Even this retrofit was the first time I have done it...

[@richardbrown8427]

Hi sorry to bother you again. Where did you source you renolink from?

[@LMAutoRepairs]

@@richardbrown8427 I got my one from eBay...

[@eoinmcl1354]

Great video, will attempt this on my 2016 1.6 If you see this , Can you confirm which version of renolink is best. Thank you

[@LMAutoRepairs]

The latest...😊 Thank you for watching and for your comment!

[@patrykbury6547]

Hi mate. The video was very helpful. I have one more problem, on the dash is “error prog”. Any idea how to fix this?

[@LMAutoRepairs]

Never seen that issue... What does a scan reveals? Thank you for watching!

[@patrykbury6547]

@@LMAutoRepairs I have only Reno link for diagnostic and if I try to read faults is: “no can communication”

[@jpbmatra8157]

Hello, you have just replace the steering wheel and place the switch ? Not the flex contactor ? Thank you.

[@LMAutoRepairs]

No... The clock spring in this case already had all necessary lanes... but obviously check yours... 👍👍👍

[@jpbmatra8157]

@@LMAutoRepairs thank you for your reply. Do you have find the switch connector behind the trim panel ? The contactors on the feet are goods or replace ? The steering wheel can be upgrade by placing the buttons or it's one assembly ? Thank you

[@LMAutoRepairs]

I just did it as per the video... I can't remember now if you can just install the buttons... this was done some time ago... Sorry...

[@martinkotze7243]

Great video! Very informative. I have question please. My 2016 Trafic has the factory installed CC and speed limiter but is not working. Whenever I try to engage either function I get a "Check Cruise Control" or "Check Speed Limiter" message on the instrument cluster. I've replaced the clutch switch but still no change. Any idea what the problem could be?

[@LMAutoRepairs]

Have you watched the whole video.... without skipping? 👍👍👍

[@martinkotze7243]

@@LMAutoRepairs Not yet. Will have a look. Thanks for replying 🙂

[@costache01]

Hello mate where are you based and how to find you?thanks

[@LMAutoRepairs]

You just did find me...😉 👍👍👍

[@robertszeffler2190]

Hi I have same trafic 2014 but my mechanic told me that for this to work van must have cruise control module and he plugged computer chcecked and my van doesn't seems to have it anyone had same problem? Did you plug computer to check before you start putting cruise control to this van? Cheers

[@LMAutoRepairs]

In this cars the cruise control is managed by the engine module... as you have seen... Thank you for watching and for your comment!

[@simonmachado6425]

Good afternoon, I'm looking to enable cruise control on my renault fluence, could I follow the tips in the video or would you have any more?

[@LMAutoRepairs]

Never done it on that car... but it is probably similar... I would guess... Thank you for watching and for your comment!

[@lv243335]

Hello, watching youre video and i was hoop full that i could do the same thing with my trafic 2015 changed the steering wheel and fitted the switch, (cables were allready there) but even the dealer cant get it to work. do you have any ideas or maybe? or some connections in the netherlands where i can go to? it seems to be the programming of the CC.

[@LMAutoRepairs]

Hi Sorry... but I don't know anyone in there... It is strange though that the dealer cannot do it...🤔

[@deporbs]

Amazing job!!!

[@LMAutoRepairs]

Thanks! 👍👍👍

[@aaronbodger870]

Iv tried this on my 2016 vivaro 1.6 , fitted the steering wheel and switch in the dashboard but no luck , tried 3 different diagnostic software and nothing 😭

[@alicanyazgan]

you need to change clock spring

[@paweldeptula284]

Hi did same with my Vivaro unfortunately not working. Have mange with your Vivaro?

[@paweldeptula284]

@@alicanyazgan Hi, What kind of clock Spring need to change? In my Vivaro clock Spring is prewired but after changing steering wheel with cruise control buttons the Cruise Control still not working. Any Idea?

[@mapotn]

Hi. Thanks for the video. Want to do the same with Mégane 3 and Renolink V1.52 from AliExpress. Should it work? Thanks

[@LMAutoRepairs]

Should do... Thank you for watching and for your comment!

[@liambell3881]

Hi LM, my vivaro 2017(same as your video) has the same symptoms as your Renault in which when I turn the steering wheel CC/SL comes and goes (more often goes than comes) however my fault codes are different from yours, is it still possible its the clock spring at fault? My fault codes are DF068 Speed limiter/cruise control function error. Any help Is much appreciated, would just like to know your thoughts as to if If you think I should replace the clock spring or if there’s a fault elsewhere. Thanks

[@LMAutoRepairs]

Could be the clock spring indeed... live data would help determining for sure... 👍👍👍

[@쑝이파파]

Thanks to your video, I was able to activate the speed limiter function. But CC doesn't work. I tried authorization enable by Renolink 1.87(red) at IGN ON without engine running state. I can get a response message "ACCEPED". but state goes back 'ENABLED' to 'DISABLED' while starting engine. However, SL is already working perfectlly. Are there any pre-condition(such as keep driver's door opened, brake, cluch pedal condition etc.) or specific sequence for 'authorization to connect cruise control and speed limiter options' - X62 (MASTER III 2019 ) SID310 1. configuration - Cruise Control (option) : without, 2. configuration - CCSL steering wheel push buttons : without, SL option / SL and CC on/off main button : with

[@LMAutoRepairs]

I am sorry, I don't remember now all the details... but I don't think it was anything like that... Just make sure you have the correct .xml file for the ecu you are working on... 👍👍👍

[@jordanskinner2660]

Hi mate ideal video what software did you use to activate it cheers

[@LMAutoRepairs]

Renolink... Thank you for watching!

[@alessioriso9671]

Hi, thank you for your great video! Do you know if the cruise control parts on Renault are the same used in the Dacia Sandero/Logan 2? If it is so, do you know the code for Dacia and how I can code it?

[@sergiotomas2317]

Hello. I need too for dacia sandero. Whats the program

[@TheSkyline35]

Hi, yes, they are all the same

[@toze4172]

Hello friend...do you know if it is possible to install cruise control in renault megane year 2005?thanks

[@LMAutoRepairs]

Never tried on that one... but should be possible... 👍👍👍

[@blowJobstudent]

Great video, I was wondering if it was possible to do the same with the automatic start stop system, do you or someone else have any idea?

[@LMAutoRepairs]

Possibly... but I have a feeling that will be more to it... I believe that the starter motor for cars with start and stop are different.... plus the extra capacitor for it... I am sure it can be done, but probably not worth the investment... Thank you for watching and for your comment!

[@blowJobstudent]

@@LMAutoRepairs Thanks for your reply, I wish it was as "simple" as installing the cruise control, what about installing a passenger side airbag or a factory r-link hemdunit? Also, where do you get your genuine Renault parts, I can't seem to find any here in Belgium?

[@naushadali95]

great job.thank you

[@LMAutoRepairs]

Thanks!

[@sameerwarrich26]

Great video , can you suggest me a good tool for peugot and citronen. Thanks

[@LMAutoRepairs]

Hi rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FLexia-3-Full-Chip-V7-83-PP2000-V48-Diagnostic-Tool-For-Citroen-Peugeot-921815C-Z%2F143275743478%3Fhash%3Ditem215be658f6%3Ag%3AHLMAAOSwjXZcZ6JY&campid=5338344466&toolid=20008 Buy at your own risk... Thank you for watching!

[@sameerwarrich26]

Thanks alot my friend

[@yourloveismydrug6537]

hi , another great video . will renolink allow virginisation and coding of used abs module to this vehicle

[@LMAutoRepairs]

Possibly... never looked into that... 👍👍👍

[@yourloveismydrug6537]

@@LMAutoRepairs thanks for the quick repl

[@12alexbailey]

Am I right in saying if the clock spring has the extra connector then it doesn't need to be changed? I have the stop/start button where you installed the switch on the dash and the parking sensor switch where you originally tried to install it. Do you know if the cruise control switch will then be the one next to the stop/start? Where are you located? If you're not too far away then I could get you to code mine for me? Thanks

[@LMAutoRepairs]

Correct... it does have the extra connector. Thanks for watching and for your comment!

[@12alexbailey]

@@LMAutoRepairs Ordered a steering wheel and the dash button. Where are you located?

[@LMAutoRepairs]

@@12alexbailey Cambridgeshire... Sorry, but I do this as a part time, I don't usually publicly disclose my address...

[@johncorner2347]

Help!! During downloading software bosch ecu EDC16C34 usb cable interupted during the installation and now no starting ..it says no comunication with the ecu.How to back up or reinstall the original software? I use peugeot planet diagn. software. before downloading everything was working.. only it was over heating as it got 2 speed cooling fan and it switch on 110c. I can swith it low and high speed manual from the diagnostic but the ecu not.That I was trying to update the software and now a big problem!

[@LMAutoRepairs]

Hi That's never good, when the flash process is interrupted... If planet is not communicating, your next best option my be kess or similar, that failing, try it on the bench, once again with k-tag or similar... Hope you get it sorted! Thank you for watching!

[@MarcelHVAC]

Hi great vid! Can you code coming home/leaving home too with this software on the Traffic III?

[@LMAutoRepairs]

I did not checked... But most likely it will be able to do it... Thank you for watching and for your comment!

[@MarcelHVAC]

@@LMAutoRepairs Also on the Vivaro since this is the same model i guess?

[@7la00]

Hi, Thank you for the video, do you think would it be possible to activate adaptative cruise control on a clio 5 which is already equipped with a cruise control ?

[@LMAutoRepairs]

Possibly... But will most likely need some retrofits... As the adaptive cruise control relies on a radar and a camera, that you most likely don't have installed at the moment... 👍👍👍

[@7la00]

@@LMAutoRepairs My Clio 5 is equipped with the front Radar + Front Camera + AEBS + Distance warning + urgence beak, I believe that it's a kind of activation and reprog, can I have your contact please!

[@7la00]

@@LMAutoRepairs Hi, I realized some tests on my Clio 5 yesterday, I assembled the new steering with the ACC button, I modified ABS to Activated ACC as well as in the front radar. But after this, ACC is not working even normal the cruise control is not working as well. When I diagnosed the injections by the clip I checked the voltage is around 3.8v, when I press on the buttons of ACC the voltage drops down to 10mV ≈ 0. what do you think about this ? Could you please send me your email so I can show you videos I took. Thank you.

[@mxkyle6712]

Any ideas on how to authorise, got all my buttons working etc but when I try to enable it and authorise it keeps saying rejected! Any ideas?

[@LMAutoRepairs]

Which tool are you using? Thank you for watching!

[@mxkyle6712]

@@LMAutoRepairs renolink 1.52 (blue plug)

[@3261carl]

My cruise has randomly stopped working 2016 Vivaro no warning lights. Done a full ecu scan without finding any issues. Would you have any advice what to try ?

[@LMAutoRepairs]

Check live data... You answer will most likely be in there... 👍👍👍

[@3261carl]

@@LMAutoRepairs we did go out on a road test whilst plugged but nothing. The speed limiter works fine. The cruise control lights all come up on the dash but the plus and minus to initiate cruise doesn’t do anything but plus and minus work on speed limiter. The van has just a a gearbox replacement and since cruise has stopped working.

[@LMAutoRepairs]

Ah... That makes more sense... Was the gearbox like for like? Is the box auto or manual?

[@3261carl]

@@LMAutoRepairs it’s Manual the old one gave up at 105000miles so had a reconditioned manual put back in ?? I thought the cruise worked off of the throttle position sensor. Thanks for you input, really appreciate it. Short of taking it to Vauxhall me and the mechanic are stumped.

[@LMAutoRepairs]

Is the gearbox is not exact the same as the old one, the gear ratios might be different... And that can render the cruise control inoperative... Seen it on a citroen... 👍👍👍

[@Bonez88-22]

Hi, very good video, my van is a 2016 model just a quick question , is there two different clutch pedal switches, i had my van in with vauxhall and they said that they tried everything but it wouldn’t work and had to be coded at the factory, i am quick to think its a load of faeces, because the dealer had sold the van with cruise control but once i got the van it didnt have it so they said they would add it to the van free of charge, everything seems to be fitted and the speed limiter is alarming at 75mph on the motorways in the south of ireland! I will be opening up the dash to see if they are plugged in, and am looking into what software can code the van incase thats all it needs Also wanted to note that i used to get near 40mpg and then they recalled the van for the knock sensor software update and now im lucky to get 32mph just wondering if there is a correlation between the two! Thanks again for the video!

[@LMAutoRepairs]

Hi The dealer should be able to do it... And if they start the work, you should definitely insist with them to have it completed... Check on a different dealer perhaps... As for the consumption, ask the question... They should be able to give you an explanation... Thank you for watching and for your comment! 👍👍👍

[@Bonez88-22]

LM Auto Repairs Thanks for the reply, i got the van at a very good reduced price as it was a demo and only had 5425 miles on it and if im honest i wasnt that bothered about the cruise control it was the principal of it that i said it to them, just to see their response, when they said it couldnt be done i then got free reversing sensors fitted and £500 cash back so i was a happy camper and still have the steering wheel and the cc/sl toggle switch fitted so i’m going to have a go at getting it up and running myself and worst case scenario i’ll take it to a different dealer like you suggested and get them to look at it! At least i now have a video as evidence and proof that it can be done😄! now to look into the reversing camera that you mentioned! I was not aware that they existed so for that i have to thank you again!! Keep up the good videos!

[@LMAutoRepairs]

@@Bonez88-22 Sounds like you have plan...👍👍👍

[@mikexx3418]

Great video. Does the Renolink software work with the 2014-19 Vivaro

[@LMAutoRepairs]

Never tried it... Thank you for watching!

[@alicanyazgan]

yes thats the way you can do

[@richards4456]

Did you have to install any switches for brake and clutch? Or is it just a case of installing the steering wheel, cruise switch and coding?

[@LMAutoRepairs]

You need to check, in this case all the switches where already there... But check, as I believe some models did not came with them... Thank you for watching!

[@richards4456]

@@LMAutoRepairs Can cruise control be activated in clip? Where it says cruise control and speed limit "without" can these be changed to "with"?

[@LMAutoRepairs]

@@richards4456 Yes... however, in this case looked like it needed some sort of online connection... So I ended up using Renolink... But you can always try...

[@richards4456]

@@LMAutoRepairs did cruise work without any coding? Just didn’t show on the dash? I’ve fitted the wheel and cruise button. All showing on live data on clip. I cannot click ‘write configuration’ however. Cruise control isn’t working currently.

[@LMAutoRepairs]

Needs coding on the engine ecu... if I recall correctly...

[@paweldeptula284]

Hi, could i use renolink software for Vivaro to code cruise control buttons? Thanks for any help

[@LMAutoRepairs]

Not sure... but I think it will not work... 👍👍👍

[@paweldeptula284]

Thanks for the reply just want to ask do I need to disconnect battery when i will remove air bag?

[@LMAutoRepairs]

Highly recommended... 👍👍👍

[@paweldeptula284]

Any idea what issue could be in my Vivaro 2015. I already change wheel steering with cruise control buttons I contacted connectors with my existing clock spring and I installed same Cruise Control switch unfortunately when I started to drive the cruise control doesn't work. Do I have to use software to code?Any help will appreciated.

[@LMAutoRepairs]

I would say yes... if was not there from factory, will have to be coded/programmed... 👍👍👍

[@steeeven1]

Hi there! Great video, I’m going to be using this to add cruise to my Trafic. Could you please tell me where you got your copy of Renolink? I have the same interface as you. Thank you!

[@LMAutoRepairs]

My came initially with the cable... Hope you successfully retrofit it!🤞 👍👍👍

[@1971dave]

@@LMAutoRepairs hey man, changed the steering wheel with the buttons on there same as in your video, connected everything up on the wheel side of things, put the ignition on and dashboard says check vehicle, spanner light is on, headlights are on won't turn off if you move the stork, same with the wipers, and when I turn the engine off the wipers are still going, so I disconnected the battery to make that stop, any ideas,, thanks dave

[@LMAutoRepairs]

Double check everything you touched... make sure everything is plugged in correctly... It shouldn't do that... 👍👍👍

[@1971dave]

@@LMAutoRepairs one thing I didn't mention, when I disconnected the horn and the airbag, I didn't disconnect the battery, but I did then disconnect the battery to connect anything back, ReConnected the battery and the dash says check vehicle and the spanner light was on, turn the engine on wipers stays on on headlamps, put the other steering wheel back on but things are still the same,

[@LMAutoRepairs]

You must have disturbed something... double check connections etc... Scan the vehicle if you can...

[@richardmessenger7896]

Amazing I have everything, just needs coding 🤣

[@LMAutoRepairs]

😊 👍👍👍

[@luismiguelsilva1736]

Super... What connection did you use lo connect to vehicle? ELM327? Other? thx

[@LMAutoRepairs]

Renolink... Just google... Thank you for watching and for your comment!

[@luismiguelsilva1736]

@@LMAutoRepairs Does it requires the blue version or red one of renolink cable (from china OK)? Can it also be done through DDT4all with elm327 or PyClip/PyREN with same ELM327? Thank you.

[@LMAutoRepairs]

@@luismiguelsilva1736 Not sure on that... Never used any of those other systems... it might be that they also do it, but I can tell...

[@luismiguelsilva1736]

@@LMAutoRepairs Thank you. From Tuga 2 Tuga,... which one is the adequate cable renolink for this (Blue one - renolink v15.2, or V1.87 red one)? Which did you use on this experience? You have made this on a Dacia, for a Renault (Megane mk3 grandtour is my car) the programming would it be the same? Thx.

[@LMAutoRepairs]

@@luismiguelsilva1736 I have used the red cable... that's the one I bought initially... did not even know there was a blue one... probably is just the colour... everything else is the same... I am not sure which version I was using initially... have updated a couple times since... I am now running 1.87... Never done it on those cars, but I assume will be similar...

[@peterprice8393]

Hi I have a Renault trafic. 2016 and I am getting. Check cruise control and check speed limiter fault . Just wondering where you are located and if you could help with this problem.

[@LMAutoRepairs]

Have you scanned the van? 👍👍😬

[@peterprice8393]

@@LMAutoRepairs I have DTC056415 showing and I think it either 12 volt missing or shorted . If I switch on to cruise I get the message check cruise control . No lights show on the dash in green or yellow . If switch to speed limit, I get the message check speed limiter and the same no lights on the dash green or yellow . Just wonder if any body has any ideas could it be a fuse ? But no fuse listed in the hand book .

[@LMAutoRepairs]

@@peterprice8393 Check live data... you might have the same problem as I had on this one, as explained in the video... and on the other video for this... link in the description...

[@peterprice8393]

@@LMAutoRepairs it’s not a retro fit . The van is the sport model and came with CC & SL but for some reason has stopped working . I have only had the van a week and only found out about the problem when I took it on its first long journey.

[@LMAutoRepairs]

It doesn't matter if it a retrofit or an original from factory... it still has a clock spring that can fail... 👍👍👍

[@666yurko666]

Hello, i bought steering wheel, and cruise/limiter button, changed these two things, went in pyclip, wanted active cruise control, but in options i dont have anything about cruise control, please, can you help me?

[@LMAutoRepairs]

What software are you using? Try renolink... Thank you for watching!

[@666yurko666]

@@LMAutoRepairs thanks for answer, im using just mobile application PyClip, its something like renolink, when i choose Trafic III, i dont have option to find - active cruise control, when i choose some different car, for example Megane III, option to active cruise control there is, so its possible, that application cant do this action on Trafic? I will find someone wtih renolink, and try it.

[@LMAutoRepairs]

Never used such tool... So I can only guess that if the option is not there, then it can't do it... Try renolink then... 👍

[@666yurko666]

@@LMAutoRepairs many thanks, i will try

[@robertszeffler2190]

Hi have you got garage somewhere in UK I changed wheel and got button but I dont know how to code van maybe I if could come to your garage would you be able to do that? Cheers

[@LMAutoRepairs]

I don't have a garage... I do this as a part time... Find someone with Renolink or visit the dealer... they shouldn't charge a lot just to code the cruise control... Thank you for watching and for your comment!

[@robertszeffler2190]

@@LMAutoRepairs thanks, just been to renault and they can't do that because cruise control is not originaly fitted I'll try buying the software and do it myslef your video is very good cheers

[@LMAutoRepairs]

@@robertszeffler2190 Hope you get it sorted!

[@MrFOXMAROC]

Hi sir, i had a duster with cruise control working but not showing on dashboard, any help plz.

[@LMAutoRepairs]

Hi Is that retrofitted or original? Check coding and faults... Thank you for watching!

[@MrFOXMAROC]

Tkx, i just watched the renolink part, thank you very much

[@LMAutoRepairs]

@@MrFOXMAROC Lol 👍

[@MrFOXMAROC]

Do u have a gmail where i can send u a picture of a drive IC mosfet that you can help me with?

[@keithharcourt2393]

Hi what software version was renolink cheers

[@LMAutoRepairs]

Not sure now... but think 1.5x something... Thank you for watching and for your comment!

[@mapotn]

Hi LMAutoRepairs, just received blue cable Renolink v1.52 from Aliexpress. But I am struggling at the beginning. Could you please share how did you manage that ECM and Dashboard in the ECU left side list? I am interested how did you set up this list since the begining. I have interface connected but cant scan any xmls from the car (Megane 3). Highier versions cant even connect interface(v 1.67). Please advise. Thanks

[@LMAutoRepairs]

Hi Make sure you have the correct xml files in the database for your car... Then you just scan the whole car... Thank you for watching and for your comment!

[@mapotn]

@@LMAutoRepairs thanks but how to select correct one?

[@LMAutoRepairs]

@@mapotn There is an auto scan function in there...😉

[@mapotn]

@@LMAutoRepairs do you have red or blue cable?

[@LMAutoRepairs]

@@mapotn Red...

[@scottc1484]

Hi mate I want my 2015 to work what software will I need to program it? Thanks

[@LMAutoRepairs]

I used renolink as per the video... Thank you for watching!

[@scottc1484]

@@LMAutoRepairs thanks I have the software but have hundreds and hundreds of files to open?

[@LMAutoRepairs]

Well... you need to open the correct XML file for the ecu you want to work with... Usually a auto scan picks up the right file... But I had instances when it didn't... Hope that helps...

[@hissnainzabir3711]

Can anyone fit it to vauxhall movano 2012??

[@LMAutoRepairs]

I guess you can... but the coding will be slightly different... Thank you for watching!

[@jusb1066]

the accent made me laugh, renal traffic :) or is that intentional , hahaha (just say ren - o )

[@LMAutoRepairs]

I would love to see you speaking my native language...😉 Just kidding... I will try my best! Thank you for watching and for your comment!

[@deporbs]

Year 2012 Master and Movano - instrument clusters - can they be swapped or they have different software and won`t work just by swapping? Need any coding ?

[@LMAutoRepairs]

I would say they are interchangeable, but possible coding needed... 👍