9" FABTECH LIFT KIT IS FINALLY COMPLETED!!!!

In todays video we finish the Fabtech lift kit on my 1997 f150 and it turned out amazing!!!

[@CarolinaBowTie]

16s and 38" mud grapplers on old Larry! Keep it classic with the late 90s early 2000s.

[@keltonderkach9601]

Yea that’s the only way to go hope he does that

[@graysonklimczak5775]

I agree!

[@ripperlipper1016]

And not that gangster shit

[@britthardie4680]

Time to put some 37 mud grapps on it now

[@keltonderkach9601]

38x15.50 graps!!

[@dawson_5.0]

Only on 24 foes 😂

[@robertramj136]

Hell no he already did mud grapplers you idiots

[@michaeldagostino69]

38x15.50

[@anthony4185]

Nah wides

[@dereckrobertson8997]

Definitely should do the bullet holes and mud graps bc they go so well with the look of the 10th gens

[@Kennybeachum]

Love the idea of 37s and bulletholes

[@Jay-hp6pu]

I think 37’s on 24x14’s would look nice. Nothing crazy but also kinda crazy at the same time.

[@zachcook6617]

That’s what I was gonna say cause 35s even with offset is way to small

[@itzpotater8418]

24's? them some blackie rims lol not enough tire

[@masonspears2764]

“Nothing crazy”

[@christianfisherman6338]

Larry looks sick! Definitely 2inch spacer in rear and swap the grill and front bumper from Big Red. Then 37 Grapps on 03 f150 FX4 stocks, or 24x14's on 35's!

[@jeremypoole8879]

Bud loving the content, putting out bangers.i think 37s and 12 wides would look🔥

[@cooperjones4597]

it looks so good love the vids man.If nothin else you’re getting to know the front end of the truck super well 😂

[@Leichner1]

I am agreeing with you I wanna see that old Larry look with the bullet holes and mud graps.

[@jlautomotive6349]

L…A…R…R…Y…!!! He looks absolutely incredible, been a long time and I’m so glad Larry finally has his lift! I say 37s with a 10-12 wide at max but I would love any old school look as you mentioned!! Keep up the amazing work!👍

[@slinkhardtimes2852]

The way he is doing the truck make it look so hard

[@bamaknifeguy]

Done put ole Larry in the clouds. 😮. I dig it man.

[@bowen1001]

Larry lookin hard!!!

[@lorenzomows]

Looks good. You may think about adding a 2” spacer to the rear the front sticks out more than the rear just how them knuckles do when put on

[@motorlife5239]

the shorty headers for the ole 2 valve 5.4 would wake this truck up and make it sound like a beast Shorty headers are a must

[@zacharystone6357]

We need Larry chopping too!! Maybe a cam for Larry? Been watching for years always loved your videos and Ole lare bear💪🏼💪🏼💪🏼

[@JDavid334]

Think it would look pretty good with the Mickey Thompson classic 3’s 16x12 with a decent 35 or 37 mud grip. It would have a good old school look.

[@Peyton0417]

Recently just bought a 2005 crew cab Silverado with a 5.3 in it and I love to see chomper content gonna have to go back and look at what u did love the videos keep it up

[@AdrianBoggs]

24x14 chrome wheels with 37 inch tires would be the perfect setup

[@jerrysqwirts9108]

26x14s would be insane. I say find some 22x12 or x14 forged wheels that fit that lug pattern and run some 35 boggers would be sick

[@musicbass4469]

Can't wait until Larry is fully done it would look soo good you have a good taste in trucks I tell you what

[@andrewphilcox3428]

I like the welds idea, but definitely wide is the way to go

[@niiko_9161]

Og 16x12’s and 35s would look awsome. Nice work man!

[@clos1259]

Such a badass truck. New front end grille/bumper swap & complete respray would be🔥🔥

[@sinceregrant4619]

Gon be looking so good luv Larry's upgrades he looked better before but even better now🔥💪🏾

[@tylerl1816]

Love seeing you include Lauren in the vids! Keep the posts coming brother, I watch them as soon as they release

[@SamorSambo]

Just throwing this idea out there. I think you should do a giveaway with Larry after you get it completed! 🤷🏽‍♂️ 25-50 dollar mystery boxes one box has the keys. That would be pretty cool.

[@hmr9147]

16:43 could be camera angle but it kinda looks like the rear axle ain’t centered in the opening just figured id mention it bc it could cause issues when you go to a big boy tire. I know some lift blocks have off center alignment pins. Larry looks dope btw keep ‘em coming.

[@dillpill4484]

I saw that too, I'm glad I'm not the only person who saw that.

[@victorvilla864]

My 10th Gen wants to be living like Larry, looks awesome man 🤙🏾

[@mjt8343]

Gotta find a set of 16.5x14 welds with 35x16 boggers

[@stevenoldham564]

Larry is lookin good, I’m more of a Chevy guy but he looks good. Can’t wait to see what wheel and tire setup you go with.

[@southerntiessxs1515]

39.5 swampers on some old school wide welds would be 🔥

[@dkmaloney6799]

Duuuddddeeee, this has gotta be the best Larry has ever been. By far my favorite so far. I hope sides are in its future 😅

[@logantharpe2205]

I have been waiting for this video since the first time I saw ol larry great job man

[@williambeckham3447]

Looks perfect maybe biggest tires now all that’s left is to go mudding

[@hunterbrown6649]

Looks great ready to see it on some gladiators again

[@CollinZ71]

Yes Larry! Finally! That looks so effin good dude! I agree with goin old school with it!

[@aaroncruz2948]

I just bought a kit and it came with break line extensions, if you get any id love to see a how to video, keep up the larry videos 🔥

[@Outdoors-pb2sc]

35x14.50 Boggers on 15x12 bullet holes.👌

[@chandlerlewis849]

I say do an old school style look. I think all the options you said would be sick. But I think some 16x12 or 16x14 or even a 16x10 and go really big on tires would look sick

[@savagestrikefishing4695]

I will forever be on the search for this fabtech lift 😅

[@fishingwithbassingaround4318]

I just bought one at a junkyard

[@alexvest4889]

Trying to find this lift, is it discontinued?

[@trin_sierra]

I really like the idea of a small, wide wheel and some graps Also, at 0:00 is a phrases I’ve never heard before

[@djrecreations6636]

Looks awesome man. Sitting perfect

[@salarical9163]

loving the squat

[@adamsaylors1934]

Larry looks good

[@zayyirwells2405]

Man I wanna learn how to do my own work. Clean truck

[@Houston_sides]

Chase you should put those stocks back on Larry for a video it looks cleannnn.

[@samuelskelton9603]

Larry’s really giving me prerunner vibes so I think it would look sick if you went with a prerunner style wheel and tire setup

[@daltonallen9252]

37in mud grapps wit 20in 2016 stocks would be 😮‍💨

[@TGunner23]

Beadlocks with 37’s would looks sweet

[@brentbanksfdhg6268]

Looking awesome! don't go higher

[@lavinriner8355]

I think you should put ssr swampers and bullet hole to keep it classic.

[@Blackocalypse]

I thoroughly enjoyed this upload, Good job man 💪🏽💪🏽🔥🔥

[@Jalen_Knight8526]

Love the vid keep up the great work #straightpipelife

[@johnhughes5568]

I think you should definitely do a og bullet hole setup. 16x14 on 35” boggers

[@isaaccoleman7534]

For future reference it’s a lot easier to lift the truck from the rear diff, undo the u-bolts then take two pieces of wood (like the one you stacked on the jack but bigger) and put them under the leaf springs on each side of the wheel hub then lower the truck onto those blocks it will then separate the space you need to remove the old block and replace with new one then Jack the axle back up to put ubolts back in. ALWAYS jack the truck from the rear diff when changing blocks and do one side at a time it will avoid messing up rear alignment.

[@Gusteeze]

Sickkkkkk bro!! So happy for you man keep up the badass content!

[@jacobb_.251]

I think the old school look would look amazing on it

[@kameronrooks9962]

The squat looked so good though 😢

[@bobduncan9465]

CHASEEE, amazing video.

[@alexisturntup03]

Looks like larry is ready for 37s on stocks

[@chadbartholomew8222]

Building a 2wd 2000 with my son for his 16th birthday. We have 26x14 on 37's for it. We just put in a 8.5 inch lift and it's cambered bad. Don't know how you did it with no camber. Where did you get the 7.5 fabtech lift? Can't find them anywhere since they were discontinued

[@SkateAndReview]

Forsure gonna have to regear to some 4.33’s or 4.56’s to keep your transmission from burning out

[@Povertycab]

Yea only gonna be at 5k rpm at 60

[@baybaeboy6]

Nice hey man where can I get that impact looks really handy?

[@SuperChevyboy85]

Larry is clean SON!

[@bamaknifeguy]

Opening line “It looks and feels absolutely massive” Insert That’s What She Said Joke here 😆🤘🏼

[@michaelyoung7256]

Do you have aftermarket control arms on as of when you put the lift on??? Tried to put coil overs on my 2000 2wd and it wouldn’t clear with my stock uppers.

[@pushintincharters]

Looks good brother!! BFTough!!

[@owenpowers8306]

Larry sittin pretty a set 14 wides would tie it together

[@jamazonnewyork3221]

i think if you put a wheel spacer on the onther end to bring the wheels out the same as the other end it would look really neat

[@jorgefigheroa77]

Looks amazing brother…any problems with your rear drive shaft angles?

[@JeffGoDawgs]

Looks great can’t wait till those factory wheels are GONE 👍🏻

[@logansimpson5980]

Great video what kinda of exhaust would you recommend for a Dodge 1500 4.7 v8 I have dual exhaust on it now but just want it a little louder

[@chaseharrison9686]

Put Baugher’s on him bro. It looks amazing.

[@85countryboy]

Time for some bullet holes 16x12 on some 35” or 37” mud grapps

[@BigDee1974]

Now just need to upgrade those wheels and tires.

[@bigb8368]

I wish you would do a ram build

[@RyanDunn69]

i think the back dropped down about 1-2in with some 24x14. i’m not a fan of black wheels or wides, but some black hardcore HC13s would look killer on the same tires larry has now just for 24s or 26s. EDIT: and the front end swap needs to happen

[@sinceregrant4619]

If you could you can put Step ladders on there if you want to the ones that come down luv larry🔥🐐

[@cacm1991]

I went with the 5” lift but my wheels have negative camber and are adjusted to the max they can go, did u do anything about it? Change upper control arm?

[@newenglandoutdoors9]

16x10 or 12 on 38s on mud graps

[@redwolfmaddox3986]

37s and 12 wides is what it really needs

[@isaacwoods6116]

12 wides on boggers or 16s and 38 Grapps have my vote👍

[@bradlylagace6091]

Old school with 37s no doubt 🤞🏼

[@CampAndDestroy]

Great video trucks looking good

[@deacsot2542]

hey men, can you tell me where did you buy this kit? i have a truck similar and i like the results

[@BanditoBoys31]

Where did you get the spindles from?

[@bobbyhurdt8935]

Need to get some THORNBIRDS!!

[@Jason-em8kr]

“it looks and feels absolutely massive”

[@hectorreyes8262]

Looks nice man, do you have to change the upper arms with the new lift?

[@felipesolano3204]

Hey sir all lift kits make the front end more wide than the rear???

[@futhermuckerson]

Spoiler at the end? Lol looking good it needs some slightly bigger wheels like some 18" wheels on 34s. Keep up the good work!

[@XLTMarshall]

Did I miss the part how you fixed the spindles?

[@Obs_Lando]

Gotta do the bubba set up

[@jakeklotz7880]

old school setup would be so nice i like the bogger idea/interco tire idea but also would love to see it have some 24 or 26 reps and gladiators

[@Silver12LTZ]

37 mud grapps on small wheels would be killer!

[@jonathanisenhart975]

How big of wheels and tires can you go on larry with the new 10 inches lift

[@takuacheperformance4740]

She’s so beautiful😍😍😍😍

[@larrycarney159]

Bro I have been waiting forever for this video

[@rossl7422]

Love Larry man def gotta say no to ex comps on it tho