HEADS/TAILS MAKE A HUGE DIFFERENCE!

In todays video we replace the headlights/taillights, antenna and more!

[@dollapaz]

That truck came out nice 👌👐

[@rudylira2928]

Truck looking clean

[@rossstephens6887]

Clears for sure!

[@shawnhendrix8773]

Looks awesome. I agree with you on the clears. The fog lights look rough lol.

[@pumagarcia8160]

Clean brotha

[@delano62]

I once drove around the block with my cell phone on my bumper. Noticed it when I got back home.

[@killanige]

You have some nice ass trucks man

[@chryslertechnician3439]

🔥🔥

[@OriginalYTBR]

I like the red truck but chomper is the best absolutely love chomper.

[@NinetyEightHVAC]

Same here

[@travisphillips1103]

Change the grill.

[@GMCJay_lly]

link for the head/tail lights used in video please n thank you.

[@hunterbernhardt3845]

My 2001 trans am has the same problem with the seat so I’m curious if your fix will also be my fix!

[@tdog1569]

Looking right!

[@SV6SPD]

Look up Matt Paff on KZbin he has a video that shows on that control panel that the board pops itself out and disconnects from the seat switch...just take the screws out and the black panel could be unlatched.. all you do is pop it back in place and that may fix the slide part... the function for the up and down could be bc the motors have gone out or the connector could just be unplugged from the previous owner

[@a1-builds]

Love the videos! Keep growing man!

[@RyanDunn69]

please drop it on split 6s also ready to see what you do with chomper

[@jakeklotz7880]

i would say if i was in the same situation i would lift the red truck and keep the black truck leveled.

[@aj_townsend]

Great video! I think the clears would look great

[@notme5909]

Cool....

[@willyhighlights6905]

Can you please drop a link to where you got those tail lights??

[@kylerwolfe8844]

I have a 2006 GMC Sierra 5.3 and I can’t figure out why all my lights are flashing when I press on the breaks any ideas please help!

[@kivetts04dmax]

I think that front bumper need some adjustment.

[@alexluff7814]

I do like the new tail lights and headlights it looks amazing another amazing video keep them coming love you Cham

[@WJr_88]

Lights look great!

[@jonathanxo1103]

this sierra is CLEAN 🔥🔥

[@kevingreen2428]

Take off fender flares for sure!

[@clos084]

Do you ever spray a clear coat on after headlights?

[@dewaynejenkins2790]

Will there ever be another baby squat?

[@LifeOn4]

What video did you take the stepsides off in?

[@talonhafso7272]

Next tuck needs to be a diesel

[@loondagoon]

I really like the how you post like almost everyday if not everyday it’s great I got hood truck content to watch daily

[@yeetdf6212]

Do u want a 08 Chevy silverado

[@lanelauhoff]

Definitely go with the clears.

[@aryajahanban3821]

What brand and model are those headlights? And where did u get them from

[@ALLSEASONHUSTLE]

Are you going to build a garage? And have build series for the trucks?

[@collinwob]

I think clears up front. I did a muffler delete on my Sierra and LOVE it. I also want to axle dump with a big tip 🤙🏻

[@CollinZ71]

Man I was originally leaning toward a race truck stance with this now I’m leaning towards a lifted old school look, that red is classic. I think some 17” polished wheels with 35s would be killer!

[@poppypineapple9885]

You pretty much inspired me to pick up my 03 Sierra yesterday. 260k miles I bought it knowing it needed a trans and I drive it home with it screaming at me the whole time, she made it though. Transfer case issues caused the transmission issues, I wiggled it between neutral drive and 3rd. I can’t wait to get a new trans in it and get it clean as Clifford. It came with most of the options except for sunroof and heated leather seats.

[@cotyjohnson2]

It's the seat control module. Had the same issue with my 04 Sierra, it's a small black box.

[@KeoVore99]

I don’t think it would be bad to pull that interior out and put it in Chomper and it’s not that annoying to do

[@dallasdodson7305]

do you have spacers on there?

[@GreenEleganceLLS]

What size wheels and tires are you running ?

[@BigBoss-ex5ey]

The seat . The circuit board that’s under the seat goes bad. I would just go to junk yard .

[@threesvn]

Looking clean with new heads and tails. DRLs are 2 different color lights need to go all LEDs on the headlights in my opinion. Have you check fuses? Check for voltage underneath seat and/or directly jump seat motor with 12v to test if it really works .

[@jlautomotive6349]

I love the rear tail lights but I think clear headlights would look better with clear fogs or yellow fogs… Clifford is definitely coming along! LARRY!! Always enjoy the Larry shout outs!!

[@danielvilla2497]

Keep the tails clear/chrome housing the front 👌

[@tyler5984]

Looking good Please keep it

[@sinceregrant3765]

Looks amazing bro🔥💯🐐keep grinding 💪🏽💯I feel bad for Larry tho he seems lonely lol hope my Boi gets better💯💪🏽

[@raysprojects4956]

Love the videos keep it up

[@joeleek8766]

The fender flares need to go

[@JRandallEllis]

Make sure the wiring harness under the seat is plugged in. A lot of times, folks unplug them if the gear on the slider motor strips out on it (common issue). You can probably plug it back in, get the seat back to the position you like and unplug it again

[@dustinjulian3824]

U may have a blowed fuse u der the hood or side panel on driver side for ur seat and u should do the interior swap just for the sake of youtube content

[@e.leyva02]

BLACK OUT ALL THE CHROME AND TINT THE TAILLIGHTS A BIT....MUFFLER DELETE YES STRAIGHT TAIL PIPE👍

[@paytonwoodard5767]

Keep up the good work.

[@mattstewart4971]

ever think maybe a fuse?

[@mattstewart4971]

Mess me .

[@billydog1512]

on the wheels on the driver side passenger side looks much better to me

[@billydog1512]

I have never won a prize before don’t know how to do it just an old man

[@billydog1512]

I have a 2003 Silverado.

[@matthescrawford494]

interior aint that hard to take out, recently did it and took about an hour

[@beejay8719]

Check the wiring underneath the seat. Follow it. Has to be something unplugged. Then check underhood fuses.. never know....

[@willieechols6724]

Hey I just wanted to ask you a question how many trucks do you have

[@JohnnyReb2000]

I think clears would look better once the fender flares are removed. Right now, I don't think it really matters. Clifford definitely needs an LED upgrade, especially with the reverse lights in the upgraded taillights. For the fog lights, I'd get new housings that match whichever headlights you decide on. Check the fuse for the power seats.

[@chaseharrison9686]

Sell it put that money towards a Lift on Chomper

[@skylerbates7621]

Do you get hyper fl with them taillights?

[@johnnya.quevedo2552]

Door trim don't look great on red

[@kaesenjk7389]

this might be a hot take but keep the flares and get some black tow mirrors and i think that would look beautiful

[@jone1354]

You should level it with the back how it is now and maybe put some nice chrome rims on it and tint

[@Heath_White]

lift the front and leave the back factroty PLEASE

[@revandesigns]

Def clear on the red since you did red with clear taillights. Also you gonna tint the windshield like chomped?

[@shawngrambling1249]

Put the 6 inch tips on chomper it would sound 👌

[@loondagoon]

Is that a 6.0 ? Or a 5.3

[@poppypineapple9885]

I think that Clifford would look better with clears, and chomper would look good with the smoky ones.

[@andrewpreli309]

They do look better then stock. Im shocked you didnt go with a smoked tail light IMO it would have looked better but non the less they look good.

[@landon_windham]

I think some new style tow mirrors would look good on this truck if they’d work

[@sethrichardson8337]

There is 2 motors under your seat, they both are probably in a bine and you need to get a small hammer and hit motors while pressing your seat adjustment buttons. That should get pressure off of motors and seat should move normal. Hope this helps! 🤙🏻

[@lonestar_7.3L]

Hey Chase. Have you ever thought about putting some light bars on any of your trucks?

[@gibsonatorhb6691]

much nicer 👍🏻

[@boore7213]

What size wheels? Level kit? I have a cateye that's getting level and a good deal for a set of 20x12 wonder how they would fit for me...

[@b-e-j-dvideos2751]

Cool lights! Smoke the tails to match the heads

[@cameronlee22]

lol i just seen you in leeds today!

[@zacksmith9980]

Interior swap I have the same interior as chomper wish I had the grey feel like a grandpa driving it lol

[@brax5.9]

swap the interior, clean up the red truck a lil more add a couple things and then sell it and make some money off it and cam chomper

[@brax5.9]

also you have your new sierra so chomper is able to have the time to cam it and do anything else js🤷🏽

[@onecleanplatinum8434]

See if you have power going to the motor for the seat. Could be a pinched wire or a bad motor.

[@richardangevine3768]

Brand new lights fogging up already? Send it back! Use your voltage tester under the seat if there’s atleast power under there somewhere. Nice name. Clifford, it works. 👍

[@Rishhhahh]

Did you remove the spacers from Larry?

[@estebobby4953]

Paint match the front end and rear bumper👍

[@BrandonS55]

I’d like to see a muffler delete or a carven r on it, mainly to help me decide what I want to do😂

[@reptmon7808]

Get a true dual

[@BrandonS55]

@@reptmon7808 ended up getting true duals 5” tips 2.5” pipe to 2.25” tailpipes because it ended up being to close to the gas tank and the spare tire for the shop to be comfortable letting me leave with it. Not a lot of room to work with on a Tahoe at all but they got it done and glad I went with that setup

[@msweitzer097]

Hey random question for you! I have a 2015 Jeep WK2 that I want to do some work to. If you wanted to do some content with another vehicle, it's the white jeep with the black altitude package, i will be installing a lift and adding beefy tires. I've been watching you for a while and just moved up to Nashville from bham and my sister and brother in law still live down there around hoover. If you're interested in spotlighting another vehicle, I think it'd be cool to do something like how you did your 22 sierra lift video. Love the stuff, God bless! 👏🙌🙏

[@obs4life228]

Truck would look 100 times better with color matched fender flairs and new tires

[@obs4life228]

Why do the wheels look different on each side of the truck? When it shows the right side the wheels are all blacked out and have the chrome/machines rivets and when you show driver side it looks like it’s has a ridiculous chrome lip around the wheel.

[@YKDatBoiJoe]

Noti squad 🤘

[@adrianb7452]

do a different exhaust on this one do a carven R muffler with a side exist

[@delano62]

Chase. Are these winner messages from you real? I've seen other channels telling people these are scams.

[@delano62]

Never mind.

[@coopergoesdeep9658]

Plz don’t sell it I think you should lift this one or Chomper.

[@dornecunningham7217]

Don't sell the red truck

[@Westonsnow71]

Please keep Clifford lowered and throw some chrome 26s on it 😍

[@turbohead5612]

Don’t dual out this one put flowmasters on it or do just a muffler delete

[@johncrosby8054]

You might think it looks super cool with the tires oversizing the wheel Wells while tie is very dangerous a friend of mine got hit by a rock riding a motorcycle knocked him off his motorcycle thankfully he was not injured too badly .

[@Sam-zl3sb]

And it doesn’t even look cool. Flush fitment is always best.

[@stevebrown6503]

Dude... your videos would be so much better if you quit naming your trucks and referring to them by names.

[@DJHARDHITS]

🔥🔥