FREE exhaust HACK sounds GOOD!

In todays video we do a basically free mod to my Chevy Silverado that really wraps up the entire exhaust setup! This super easy mod makes it much louder at low rpm and decently louder at all rpm!

[@kaysenshaw5135]

Just installed Borla ATAK on my 18 Sierra tonight and I am in love! Definitely worth the price tag my guy!

[@kaysenshaw5135]

@@thunderbolt5354 looked into it but I was happy with what I got

[@coleringer533]

I like how it sounds. It’s not raspy and it sounds so good

[@mhsvz6735]

That was exhausting! Thanks for another great video!

[@1jsolano]

I just installed the borla xr1 sportsman muffler on my 2021 Silverado z71 rst. I cut out the flapper and just put aluminum heat tape on the resonators. The truck sounds like an absolute beast!

[@jonathonpettit9418]

Loving to shift blips I'm hearing man! I love shift pops like baby squat 🤙

[@colton7373]

Lol

[@cainclark139]

Nice, just ordered my 6.2 Trailboss

[@JOHNNYUPLOADZ]

Big Growl, Nice!! I plan on going that loud when I buy my house on some acres.

[@jeremypoole8879]

Sounds good , thanks for the exhaust videos , super helpful. Just put a super 44 on my 2019 5.3 and love it. They cut the flapper off on mine but I kelp the resonator

[@mikecastleberry9671]

Headers 1st and pulsar lt

[@alanwright782]

Sliding a small piece of tubing over the whole spring set up and then using band clamps works pretty well also.

[@97JoMiller]

are you able to explain this better?

[@alanwright782]

@@97JoMiller so on the outside where the exhaust damper is located you will see a spring. This spring works off exhaust pressure to move the damper that’s in the exhaust air stream. You can twist this spring with your hand but it will spring back to closed. I grabbed some rubber tubing 1.25” long and cut a slit down the center of it. You will also need a stainless steel worm gear band that can get pretty small. Take the cut tubing and place it over the spring and do the same with the band. Actuate the spring by hand to where the exhaust damper is open. Then tighten down the band onto the rubber tubing and this should hold the spring in place and the damper open. Is that what you were asking for?

[@thomasrussell7917]

Sounds good. Love it.

[@RustyTurkey.]

Sounds good, keep up with the great work on your videos

[@tpaulmac]

I could listen to that aaaaaalllllllll day. Thanks for this! I'm going to try opening my flapper valve. I'm still running stock exhaust, bc I married a city girl. I don't like taking her Pilot, so I don't want her to hate taking Sierra. Truthfully, I actually like the stock exhaust with the 6.2, and I think the flapper will help keep the cold start sound.

[@derekmatthews3714]

Do you have a video of opening the flapper and what it sounds like?

[@chooseurhard]

Yessirrr that’s what mine sounds like. I like the choppy sound in first gear

[@circlekoff-road612]

Keep it up! Looking good.

[@thewhitedemon0761]

Great sound and proves that flapper valves don’t work and or not needed

[@arturobeckett4452]

Love the truck 💯 you should try the flow master 10 series see how it sounds 💪🏼

[@BigALCigarSmoke]

Sounds real good!

[@mauricio3321]

I got it done yesterday on my 2021 trail boss for 80$ I’m happy with the results all thanks to you🤘🏼

[@blkbeastz71]

I still have my flapper valve, do you think I should remove mine? I have a Gibson catback system on my 5.3 2021 custom trail boss

[@jamesclark2761]

Sounds Awesome 👌

[@tristnn22]

True duals

[@jeremystahl202]

Stainless Works Redline series would be sweet to try. Then can swap it over to their true dual setup!

[@rodneysnead8375]

I went with a applo gt muffler, sounds better than anything else I have heard.

[@TheSlugger76]

Gibson metal mulish exhaust have it on my truck really nice neighbors know when I leave I’m there alarm clock lol

[@wadeanders13]

Sounds good man

[@julianpavlock6943]

Sounds good

[@thomasyeateriii9496]

I have a 2018 GMC with the 5.3 and have it y-piped at the first cross member, 3rd cat is gone along with the flapper valve and 2 Carven R series mufflers and she sounds right.

[@luisramosclass9010]

Are you going to sell the original 20s wheels ?

[@thomasyeateriii9496]

@@luisramosclass9010 probably no since I have everything either color matched or blacked out

[@Joel-ed9ft]

I did a muffler delete to include the flapper valve on my 2020 5.3 and it sounds good. Not obnoxious but way better than stock. I get a lot of compliments on it.

[@97JoMiller]

any drone? I've been thinking about doing the muffler delete but have been hesitant because I don't want the truck to be obnoxious or a crazy drone in the cabin since we take it on trips when playing with mud toys.

[@Joel-ed9ft]

@@97JoMiller yea there is drone on the highway when your rpms are steady. But I have the music on to play over it.

[@97JoMiller]

@@Joel-ed9ft how bad is the drone?

[@Joel-ed9ft]

@@97JoMiller I always have music on so it’s not bad. But even w no music it’s not too bad. Plus muffler delete doesn’t make your pipes too loud and obnoxious. It makes it noticeably louder than stock. It’s the right level of sound for me.

[@rockerbob949]

Sounds killer. That’s a ticket all day in Southern California though! I’m a little jealous!

[@PissDrunxVato]

No it’s not. My 2021 has true dual straight pipes and I live in SoCal IE area, I NEVER get fucked with by cops. It’s the cold start that pisses ppl off but after it warms up it sound perfect

[@rockerbob949]

@@PissDrunxVato Really? They have the big construction signs on streets that have warning flashing…”loud exhaust will be ticketed”! But I’m in super conservative south Orange County.

[@natorious76]

Ya'll need to unfuck that commie state for real.

[@squirellynutts]

If you pull your gear stalk (lever) in between park and reverse the ecm thinks its in gear but it isnt and you can free rev into the limiter, imo the rev limiter sounds horrible when people just bang off of it. Damn good sounding truck btw, i did a full exhaust from the manifolds back no catalyst no resonators and no mufflers. It does piss people off with the noise but i enjoy the sound. And its not bad at all with the afm still active, minimal drone.

[@Jgrace-hu6xn]

It sounds great can you send me a link to the exhaust tips

[@BradHuey1992]

Told you it makes a big difference 😂😂.. an put true dual flowmaster super 10. Sounds good on my 08 Silverado 5.3

[@sticktron2857]

I got the LT same pipe set up out the back true duals S10 flow master

[@ericestep9880]

My 5.7 Hemi with a mbrp cat back popped and crackled like crazy. But the drone was terrible!!

[@kadaylanvaughn9836]

No cap I really still don’t know how I feel about the new Chevy but Ik when it’s done it’s going to look good

[@johny_redneck360]

Hold shifter in between park and reverse ( will trick computer into thinking it’s in reverse but will not go into gear) then rev lightly to make sure it’s free spoolin and let her eat

[@cheriebettelyoun8301]

What’s exactly done so I can get Mine to sound this amazing? Please let me know down to those exhaust Tips and size. Thank you

[@ericbuchta9765]

How are you liking the mid range power. Do you find yourself always having to punch throttle. Jba headers I used on my 6.0. I think you should swop the cam that way you can get more torque.

[@cartercarson7302]

You need to try a carven I love it on my Sierra

[@TheV8Hooligan]

It sounds pretty good. Maybe check out black widow brand. I wanted to try the neighbour hater or the angry house wife.

[@claytonreed6378]

Sounds good. But need to tru dual it

[@2LoudTech]

What part of Bama you in? I just bought a 24 trail boss. First pickup truck after a ton of sports and luxury cars. Also sounds fire brother ✌️

[@thebishtv7254]

To rev higher than 3k rpms, press your break and then move the shifter down to where it says it’s in reverse but at the same time it’s not and then you can rev out to the limiter, works in my 2017 Chevy so maybe it’ll work in your truck.

[@loganchaney5981]

Not in reverse till you take foot off break pedal?

[@inxtics]

Lol don’t try this he’s trolling

[@msg63bretired82]

Great video. My 5.3 afm magnaflow I only noticed annoying drone about 70-75 mph and pulling slight hills in high gear. Long trips was a little annoying but around town was ok.

[@97JoMiller]

this is what I'm worried about. Our truck is used primarily for long trips

[@faridgadimov5955]

Very interested how carven tr sounds on 6.2l

[@AustinSaenz]

Just deleted my muffler on mine. Thinking about doing the resonators

[@mikecooper7094]

That sounds so good. I want my 5.3 to sound like that lol

[@terrymills987]

You got link for the exhaust tips?

[@silveradokyng]

Need that stainless works exhaust-redline series

[@lukestringfellow862]

Definitely should add a cold air intake for next mod!

[@campbell0162]

I wonder if there is a way you can bypass the rev limiter tho 🤔 Not being able to rev past 3k rpm to get exhaust clips is pretty lame. Love your vids either way bro 👊🏼

[@austinstevenson1550]

When your driving put it in manual it has crazy pops on my dads 2020 Sierra

[@dusten1804]

Here and there my dad 2019 silverado trail boss 5.3 pops but not all the time

[@PissDrunxVato]

Yea I simply just did a true dual straight pipe on my 2021 trail boss… best way to GO

[@KsKaylor]

Can you post a video of that setup?

[@mikecastleberry9671]

Headers and calm down the sound sound not important performance 1st

[@justinralston2879]

Flow master American thunder setup. Went that route myself on my 2021 Sierra 1500 and it sounds great! However the DFM is very noticeable and I gotta get that fixed.

[@jeremypoole8879]

How do you fix the dfm?

[@justinralston2879]

Through a tune

[@jeremypoole8879]

@@justinralston2879 will it avoid the Warranty?

[@blkbeastz71]

@@justinralston2879or you can get the range technology afm/dfm disabler that plugs into your obd 2 port instead of having to do a full tune . I believe the device is only $250

[@MattyiCeGames]

Borla atak is amazing I have it on my 5.3 sounds insane

[@ethanboggio3314]

Over the years I've had most every brand on my trucks including straight pipes. I have a 2018 5.3 with ATAK out the sides and I freaking absolutely love it! Best exhaust ever!

[@BridsEye1]

If we remove the flapper value does that void any warranty?

[@WillBuryU]

If I did it without the muffler delete. Would it be slightly louder, but not as loud as yours on a 2022 6.2? My factory is quiet to quite, but out of respect for my neighbors I don't want to be full out glass pack like sound at 4am when I leave the house.

[@shepss217]

Sounds amazing! Like the exhaust tips too, what are the sizes for those?

[@DR0CK]

Gotta swap those yellow halogen license plate bulbs for some 5000k led bulbs

[@lancealbrandt9719]

What exhaust tips are those? Looking to replace my USB ports.

[@rickyleroy7795]

Important question I have a 2021 silverado 6.2, I’m ordering duel exhaust tips.... I no longer want these stock HDMI ports lol what size duel tips do I need for stock tailpipe......... ( please help asap ) inlet / outlet

[@gregorybrogden8790]

What side steps do you have on there?

[@Logancrossno]

Carven r or tr would be my suggestion

[@miguelordaz7278]

What kind of side steps do you have and where can I get some

[@silverado5576]

Did you have to get a new rear bumper or did you take the chrome brackets off? Muffle shop told me they were made to the bumper

[@gabehinojos2829]

I just put a muffler on my truck carven r and once dfm goes on it sounds like nothing is there. If I did a muffler delete would I still have sound vs have a muffler on there? Or will I lose sound regardless

[@mikeleone7702]

I’m to scared to cut out my muffler will it sound a little better if I keep that thingopen

[@ericestep9880]

Ready to see how this runs at the next bama truck meet. Should run mid 14’s.

[@mexicanchiefasmr3775]

What camera and camera mount do you use

[@davidespinoza6530]

What size are the tips . The back that connects ? 3inches or 2.5

[@americanoutdoorstv7648]

Feels quieter on camera. Almost like a cherry bomb now

[@NathanKirby2001]

true duals imo lol even with stock cats not only would it give it more rumble with cats still on but it would be a lot louder

[@toddnance454]

Do you get that clunk sound from drivetrain if you let off accelerator at low speed, like in a parking lot. My 17 6.2 8 speed is terrible about that if you let off the gas

[@lmfscrew]

Probably the 8 speed, haven’t experienced anything with the 10 speed

[@SouthMississippiSalt]

I am going to try it on my stock exhaust in the next couple days ....... I'll let you know how it does. I just bought the same exact truck . 2020

[@richarderpelding6841]

How did it go?????

[@SouthMississippiSalt]

@@richarderpelding6841 I didn't notice enough difference to leave it tie wired . Just gong to do a new exhaust in the next month or so

[@kennycase8881]

I see you have a solid rear window did you ever have a slider that leaked ??im going in for the second time to get the whole slider window replaced this time 🤬🤬

[@roberttaylor8261]

Is the Factory warranty up? All the trouble with the GM 4 To 8 cylinder cam lifter collapses is just a 5k problem they won’t cover an blame it on the exhaust modification you have done! I have a 2019 6.2 Yukon Denali with Borla exhaust! Sound Great BUT just beware of any warranty problems!

[@S97795]

6.2 emblem 🤟

[@bradenbrooks8952]

Clap it 👏👏👏👏

[@austingray3413]

If u put it in between park and reverse if Will rev all the way

[@izzzstarplayer2771]

What brand is the muffler delete you got on?

[@Ro8erto1]

You need to replace those reverse lights ASAP!!

[@SittingBearProd]

Sounds like my old mercury jon boat outboard LOL just why 😂

[@jaceinlow8980]

Does the cat prevent the poping noise?

[@mattlake7932]

to bypass go in between park and reverse

[@joemichellegutierrez2537]

What exhaust tips are those ?

[@Dickie4023]

Sounds great,love your videos,I live in Michigan and have a 2021 6.2L Trail Boss on order,could you please get me a part number for those running boards you've got,I want those on mine really bad and can't find them anywhere

[@peterkeppy8946]

They look like Go Rhino rb20 running boards?

[@RustyTurkey.]

You growin a beard and mustache

[@brandonburnette421]

Anyone used dyna matt on the resonator screens instead of heat wrap?

[@stephenwilliams8385]

I’m wanting to true dual my 19. Just don’t know what it would sound like

[@campbell0162]

With or without cats? If you're not making payments or leasing it on it then I'd say go all out and do catless true duals 😂👍

[@frankjarrell5150]

Do you have a link to exhaust tips

[@NathanKirby2001]

Needs true duals

[@loganclark312]

I recommend Mbrp

[@trentonrobinson6093]

what tips do you have?

[@MattW616]

So clockwise than clamp?… seen a few say counter clock wise .

[@irvinesparza7098]

Idk if you’ll see this but did removing your muffler void warranty

[@frankieh7927]

What size are you quad tips? Looking to get it done on my 2020 trail boss

[@rogercumpian2385]

So am i. I like those tips. Do you have a link?

[@DrewLuderTV]

Do you not have tint yet

[@Joyyrn]

Do true dual straights already

[@gerardoromero8557]

Does this void warranty?

[@IamMugs]

Why would you keep the flapper in there at all? It's a restriction

[@corey2656]

Don’t u like how it farts when u go to a stop or slow down lol.