Stacking LIFT KITS on larry! ! | over 6" of LIFT |

[@jesusg1621]

Larry got free tire shine in the beginning 😅

[@thecodycast3674]

Put a chrome grill it would look amazing

[@Itsjoshbo]

Just the inserts

[@LandonWilks]

Agreed

[@sethgibson9418]

0:14 dog pissing on the wheels and tire😂

[@tonez71]

I like how Larry is now 💯

[@kennybeachum3584]

put blocks in the back it’ll look so good

[@braybourgoyne6871]

Yes yes yes

[@804_grandstaff]

boyshutyobitchassup

[@jordangarner3113]

Love Larry, you should definitely get a sound system for it

[@jonathanduncan9684]

Larry needs pa’s and subs bad

[@word9904]

@@jonathanduncan9684 compression drivers and subs

[@aaronpodgorski1617]

Needs lift upper control arms to fix the ball joint angles

[@letsweld6698]

@lmfscrew yep DT shocks still has some in stock, one of the best upgrades i did. - doetsch-shocks.com/collections/lift-kits-1/products/ford-f150-2wd-2-to-3-lift-upper-control-arms-1997-2003-pair?variant=32232258863190

[@Liltimmy56]

Headliner and stars for larry would be sick

[@Big35gonnaup]

Merry Christmas man. You helped me and my friends out with your install videos keep it up!

[@ronnielassiter6001]

Leave it sqautted looks dope Larry is perfect

[@ballingyoel6312]

god i love this truck, nothing like a this generation ford, im a dodge fan but these fords have a special place in my heart🤣

[@evan_six7]

Fix the headliners now

[@johnnyhopkins7297]

This was my first truck at 16 and I did mine before KZbin how-to videos were a big thing. It’s very easy in these trucks

[@bernabecruz-om2gk]

Very nice truck and a very good job that you did when lifting the truck, it looks more perona, now change the tapestry of the awning so that it looks more presentable inside

[@hank1820]

Hahahaha, I like the truck names. I have a powerstroke I call George, a cummins named Frank, and a mustang named Sally.

[@ljaysperspective1775]

I dont think any changes need to be made, Larry is looking great! Nice job brother 👍

[@LandonWilks]

Oh yesssss this is what Larry needed!

[@yourrealdaddy548]

And Larry deserves some headliner come on now

[@jamesthomas7474]

I think you should install the rear blocks It would look a lot better in my opinion

[@jackattack2152]

A bigger lift on Larry is so sick. Love the content man keep it up!

[@Dirtydetours]

Truck looks killer man glad that you can show how to make something out of an older truck

[@h.d.mech.mortenson2098]

Looks good. I don’t care for the squatted look but that’s just me. I had two of the tenth generation Fords and they are good trucks. I met a guy who had 550,000 kms his with the 4.0 L engine ! Good video !

[@indianadave8881]

Even the dog didn't like the half-lift. LOL

[@Z71_Taylor]

Larry looks perfect!

[@Thatduramaxguy]

Perfect amount of lean Larry is dumb clean keep up the great work

[@yourrealdaddy548]

Literally made my night, I was watching your video earlier when you reveiwed the spindles, and I was hoping you would put some puks in and here we go😅😅

[@bradlylagace6091]

Leave it how it is now , looks great !!

[@cleancustoms7577]

Looking good! Simple clean...... Hey was wondering if you could make a vid on larry's headliner.. like reaplace the fabric. Like what's the best glue an how to apply it

[@davidsims7619]

Loving the GMC, really really nice truck. I want to see cold air intake, exhaust and maybe different wheels and tires. Love your content. Keep up the great work.

[@nicksolomon6831]

Debadge larry!! Keep up the awesome vids

[@floydboy4535]

Larry looking good man leanin pretty hard really like it man

[@jacobrollo2183]

Larry do be lookin clean

[@elplebe47181]

Looks better this way,🎉🎉

[@williamyoung2955]

Looks good man. Larry is just TOUGH now

[@caballeroz7163]

Yessir, you finally did it lol. I have the coils but I’m sure the spacer will be better with your setup

[@Jackson_6.4]

That roof panel looks like it got in a fight with a raccoon

[@kendrickbrown7445]

I bought some 2.5" spacers and now can't find a shop to put them on. One shop told me spacers don't work on these model trucks because you can never get the alignment right after that. I called bs and went to a different shop and they said yeah the spacers will work but I need new shocks. That makes sense because it will be taller and the shocks on there aren't that tall. I don't have a lift on it, just want to level it.

[@smpjayloc6020]

Satisfied with Larry now 😂

[@aklawnandlandscape7767]

Just put a 3in spacer coil spacer and camber bolts on my 2000 f-150

[@trevormock5105]

How u get the camber straight

[@aklawnandlandscape7767]

@@trevormock5105 camber bolts off Amazon

[@olekaw8765]

man , those wheels look lovely! you got ole lare lookin rite , bring the back up a couple inches an hell be MINT!!

[@traviswalden6155]

Looks a lot better

[@savagestrikefishing4695]

im really wondering if there are any aftermarket upper arms to relieve some of that upper ball joint stress

[@charlessmith466]

Same

[@CornerstoneMG]

I have the same truck with the same lift but my clearance is different than yours. I have 8 1/4 from tire to fender and only 18 1/4 from the ground to the bumper. I wonder if it’s your rims and tires that make it taller than mine?

[@midnightdragon5477]

Tha'd be my guess

[@masonclark3134]

Did you have any camber in the driver side I can’t seem to get my wheel straight

[@ItsDawss]

Headliner needs to be redone now

[@tjthompson4672]

Leave it leaning like that it looks good

[@dwayneouellette6228]

Rear lift and some ford replicas would look sick

[@keltonderkach9601]

So good! I’d like to see how it looks with lift blocks but the lean is perfect! Bet the 22x12s would look a lot better on it now too

[@tonycox8746]

Be careful now driving it with those UCA's at that angle because the upper ball joints will be trash soon and possibly brake while driving it. Raise the rear end up to and make it level.

[@lifeofcreed5055]

Yes yes yes. 😍😍

[@davidminter7685]

Looks good 👍

[@icyprometheus]

Try it out with the rear blocks for s&g

[@GabrielaFlores-ri9op]

You think a 2in spacer wouldn’t affect a body lift even thou you got a 3in spindle lift??? Because IF I purchase the 2in spacers I would be going from 6in to 8in. Or would I have to buy something else to help those spacers out???

[@tristanf1505]

I’m about to put the same lift kit you got on my 2000 f150 2w

[@bradleycooper7547]

Looks good leaning like that

[@danktank1959]

I just blew my 5.4 up in desert this week, busted valve. Time for remanufactured engine soon.

[@DeepSouthBayouDiesel]

😳...why does it look like Freddy Krueger went ape shit on the headliner?

[@bladengalloway7491]

Leave Larry looks good

[@MattyiCeG]

LLLAAARRYYYY MEANNNN

[@the_real_conner2055]

I love larry

[@waylandboatright1912]

Take a yellow or any bright sharpie next time with springs and mark where it’s at the first time then put it back in the same spot so u don’t have to move it

[@jontodd7768]

Keep it like that it look good

[@Hadfield420]

Why do all those body styles have a dent in the middle of the front bumper? My 02 king ranch does and my older 98 and 00 had it also

[@ryanendreszl6976]

might get a 4 inch one to stack with a 3-4 inch suspension lift later on. do you need new shocks with the spring spacer lifts?

[@rafaelsanchez6086]

sorry the shock absorbers are the original ones or did you change them for longer ones

[@joseHernandez-ov5iv]

hey man ik this is a old video, but i have an 02 f150 with a lean like this, i just have coil spacers stacked atm, im planning on taking one off on each side. my question was were u able to get an alignment after doing this?

[@huntersauls1578]

Peep the dog pissing on the tire in the beginning😂😂😂

[@TonyDeleon90]

Hey man I need some help I've been watching your videos for a while and the same setup you put on this truck from the beginning I did to mine but I don't know if I'm having trouble with the ball joint angles if it's right or they are wrong can you please help me to fix the problem

[@deavionharding4045]

Love the content

[@socal_c10]

You should throw a billet grille insert on Larry and Earl

[@ryanendreszl6976]

installing my spacers today do you need new cam bolts for the spacer or no

[@joel959]

I can put I 3.5" Lift Front Spindle and I 3 inch coil spacer at the same time without change the control arms ?

[@jayyjones2285]

Yes sirrr 💪🏾

[@feldersartin2739]

Where did you get the spiked lugs for those wheels?

[@mannyon24s74]

Should be from custom offsets but if its not and you’re looking for some check out custom offsets 👍🏼

[@owenpullen6356]

I got mine from amazon

[@mannyon24s74]

@@owenpullen6356 nice, either is fine I got mine from custom offsets, just a matter of looking around 👍🏼👍🏼

[@buddyrouse3439]

@@mannyon24s74 that’s where I got mine they were $59 for mine

[@mannyon24s74]

@@buddyrouse3439 pretty cheap mod but makes a nice difference

[@elplebe47181]

Cuestion, How much money did you spend in parts,and how many hours of labor,?

[@austinhackett383]

I was gonna get the same 2in lift to put on my truck so it would level my truck. But people are saying it won’t fit a 2wd supercrew. If it fits a Supercab why would it not fit supercrew

[@elvissinatra3120]

I think the tire rubs.

[@CollinsCarriersLLC]

How is your upper control arms mine is bent pretty bad same set up with spindle

[@straight4.646]

I’m on 4.5” on my 98 Larry’s making me want to get drop shackles

[@andycliett3346]

You got the 4.5 rc for 2wd chevys?

[@ReeseReaper556]

Love it!!!

[@kendrickbrown7445]

What wheels are those? They look pretty good on there!

[@lonnyschwartz8628]

I have a 2003 f150 RWD and have done 3.5 spindle lift a 1.5 spring spacer, total 5in lift. Replaced the upper control arms with factory replacements and no having trouble with tires toed in at the top. Camber is maxed out of adjustment. What did you do to get your alinement correct? Can’t find longer control arms for lifted 2003.

[@hazythef-1506]

Following

[@dustinrachal1292]

Let’s see what the blocks would look like on it

[@sanman3]

Cleannn😣✅

[@bryanzamorano4134]

What kind of upper control arms do you have. My 99 expedition has a 2 inch spring lift and 3.5 spindle lift but the arms sre almost not long enough

[@austinholtzclaw2614]

2 inch lift block in the rear for sure

[@deondreking7204]

I love it

[@DanielMartinez-eb6iu]

I just added the spindle lift 3inch and want to go higher and go with 2 inch coil springs, will you need to add longer shocks if I were to go that route?

[@keepnupwitquavo2332]

I'm doing the 3 inch spindles and coil spacers on my gmc sierra would I need long shocks?

[@oliverindustries2917]

Please tell me what rims and tires you have they look really really nice

[@kelbieglover3572]

Just soo you know I’m for North Carolina so that explains why I said go higher 😂😂😂

[@jvst20051]

Why did u add that spacer? It looks like it just added more pressure to the springs i dnt think that help with the height

[@The101Point1]

Are you going to get another diesel truck? The Duramax you sold last year was very clean.

[@eliclanton480]

What size bore is are flake reps and how do I find the right adapters and bore rings?

[@caymonmoore2846]

Is the top of the spring housing supposed to go in the top of the spacer itself?

[@pandapower9336]

Need more rubber on the tires I love the squat

[@brody213]

should i just get torsion keys for my cateye or should i just buy a whole lift?

[@parkerthompson4462]

Are those flakes if not what are you running rim and tire?

[@DanoBuilds]

Just out of curiosity why did u go spacer instead of a full leveling coil spring

[@ernestorodriguez8004]

I’m looking for front shocks for my 2000 f150 same lift what model are they

[@tomlamberth6576]

Leave it like it is

[@MrGrzmnky]

Looks good but I like the mud grapplers better