Load calculation for G+3 building | Assigning load in Etabs software | G+3 building design in Etabs

[@saratalib5432]

So informative this video ma'am. Please keep uploading these kind of videos.

[@CivilEngineeringMastery]

I have created a course, structural design of buildings using Etabs software which includes structural analysis and design of a five-sorey RCC building(Real project) and is now available on udemy. Kindly use the below link to avail the full course. www.udemy.com/course/structural-design-of-buildings-using-etabs-software/?referralCode=14883FDBBD95A1ADAC02

[@yonahmartin1059]

This video is so informative 👏 thanks mam from Africa Ethiopia.

[@CivilEngineeringMastery]

You are most welcome.

[@NidadavoluVVSPrasad]

Thanks

[@CivilEngineeringMastery]

Thank you.

[@NidadavoluVVSPrasad]

Very very helpful tutorial for all levels

[@CivilEngineeringMastery]

Thank you.

[@Bright3d_Studio]

One thing self weight isnot assigned in ETABS, because the software has all the information to assign the Deas Load or Self Weight or Permanent Load G. Only the superimposed loads like wall load, finishing load, etc. are assigned. Keep it up!

[@CivilEngineeringMastery]

You are right, ETABS automatically calculates self-weight.

[@abdulrahmanabdulkadir2303]

thank you...you explain it very well.

[@CivilEngineeringMastery]

You are welcome!

[@CivilEngineeringMastery]

I have created a course, structural design of buildings using Etabs software which includes structural analysis and design of a five-sorey RCC building(Real project) and is now available on udemy. Kindly use the below link to avail the full course. www.udemy.com/course/structural-design-of-buildings-using-etabs-software/?referralCode=14883FDBBD95A1ADAC02

[@_NigmalRajas]

After a long time you appear in screen... Mam.... Talented person also quite in screen background..... I am Continuesly watch your video kept it mam

[@CivilEngineeringMastery]

Thank you so much 🙂

[@CivilEngineeringMastery]

I have created a course, structural design of buildings using Etabs software which includes structural analysis and design of a five-sorey RCC building(Real project) and is now available on udemy. Kindly use the below link to avail the full course. www.udemy.com/course/structural-design-of-buildings-using-etabs-software/?referralCode=14883FDBBD95A1ADAC02

[@sureshvarma6692]

Thanks for uploading this vedio.

[@shrinishrinivas9605]

Good teach maam

[@Godfather_Rolex1992]

Nice.. this will help me in interview..and thanks

[@CivilEngineeringMastery]

Best of luck!!

[@CivilEngineeringMastery]

I have created a course, structural design of buildings using Etabs software which includes structural analysis and design of a five-sorey RCC building(Real project) and is now available on udemy. Kindly use the below link to avail the full course. www.udemy.com/course/structural-design-of-buildings-using-etabs-software/?referralCode=14883FDBBD95A1ADAC02

[@gsingh4958]

nice mam👍

[@tayyababid2530]

I am facing a problem in designing a model. My beams are crossing the slab, which results in, that beam did not get the load of slab. Kindly Guide me in this issue.

[@robertiravonga559]

this is awesome

[@CivilEngineeringMastery]

I have created a course, structural design of buildings using Etabs software which includes structural analysis and design of a five-sorey RCC building(Real project) and is now available on udemy. Kindly use the below link to avail the full course. www.udemy.com/course/structural-design-of-buildings-using-etabs-software/?referralCode=14883FDBBD95A1ADAC02

[@克拉不啊]

Nice piece

[@arunkrishna8855]

How we can get back the simila/one/ all sorty tab?

[@CivilEngineeringMastery]

Right side corner down you have the tab to access the similar/one/ all sorty tab?

[@meenadinesh300]

Live load your are take 2kN only or we can multiply by area of the building

[@CivilEngineeringMastery]

No. live load is 2 kN/m2.

[@meenadinesh300]

@@CivilEngineeringMastery Note your also mentioned per m2 so we can multiply the area of the slab Dd = L *B * 2

[@CivilEngineeringMastery]

yes. you will get the load in kN.

[@paladugubhargav2989]

how to download the software

[@NidadavoluVVSPrasad]

Excuse me madam, I want have balance tutorials on ETABS by you because they are very illustrative. I will pay the amount for that.

[@CivilEngineeringMastery]

Thank you. Please refer to the link below for the Full course of ETABS www.udemy.com/course/structural-design-of-buildings-using-etabs-software/?couponCode=26E4449A07D1DDE360BC Staad.Pro www.udemy.com/course/staadpro-v8i-structural-analysis-design-of-a-rcc-building/?couponCode=C1D4C37A6BB77CE52038

[@narendrarbhagyaa1012]

why dead load is assigned to joints dead load is already defined

[@CivilEngineeringMastery]

Self-weight, wall load, partition wall load all are dead loads only. We have to define all the dead loads and assign them to the corresponding structural members. If we only define the load there will not be any action of that load on the structure. Self-weight is assigned to joints. Hope this helps.

[@bikashranjansethi6811]

Difference between dead & Super dead???

[@CivilEngineeringMastery]

Dead load is the self-weight of the structural members and super dead loads are like partition wall load, main wall load, and so on. All dead weights will come under super dead load other than the self-weight of the structural members.

[@bikashranjansethi6811]

@@CivilEngineeringMastery Here we need to deduct the Beam depth while ccalculating the load on Main wall.?? It shoud be 3m - Beam depth *Desnsity.. Is it correct ??

[@CivilEngineeringMastery]

Yes correct.