I’m an approved stockist for this lock. The passive pins drop down when the lock is the correct way up. It’s designed to withstand sustained attack. Thieves don’t use picks in the UK. It’s all lock snapping.
@xorsyst14 жыл бұрын
The fact it's "easy" (in lpl terms) to pick is an asset. It's hard enough that a noob picker couldn't do it with those security pins, but means if you get locked out a locksmith should be able to get you back in without having to destroy the lock or door.
@TheMrVengeance4 жыл бұрын
Most thieves don't use picks in general. It's something that takes dedication and practice. If they were willing to commit that to something, they wouldn't be criminals. And sure, there are some more "career" criminals that have "honed their craft" so to speak, but they're not the type to burgle a house.
@Nitrxgen4 жыл бұрын
Those passive pins just provide key control as a key with all passive pin cuts present will operate any combination of passive pinning, it's a super basic and weak kind of master keying/access control which is exactly why LPL said they're unusual on residential locks (1:10), they're not put in for withstanding sustained attack, they're brass for starters. Even when they drop down into place, they're designed to be pushed in to the core upon rotation similar to how sidebars retract. They do not depend on gravity to fall, yes they have no springs but think about years after use when they get all grimey and don't move by gravity alone. They move in and out as the core gets turned. The passive cuts on the key allow those pins the space to be retracted on rotation. They don't provide any security as far as attacking goes.
@AshtonK18164 жыл бұрын
911Locksmiths that was exactly my assumption; this design implies that low skill destructive attacks on the lock must be a bigger issue in the UK than it is in America. Not having been to the UK, I assume that the doors there must be more stout than they are in America, because here you see weaker locks and more attacks on door jams and windows.
@eliotmansfield4 жыл бұрын
Ashton Kemerling Yes the doors are generally strong and the crooks just snap the locks.
@uklockpickers6 жыл бұрын
We’re just job smacked at the precision & speed every Lock you do Great review & gutting we’ve been interested in this lock for a while due to the UK hype & rubbish reviews on picking them Thanks LPL ✅
@nathanhuntley13584 жыл бұрын
It's like leaving a key outside
@micrashed3 жыл бұрын
We have these locks, and I also use their padlock on my bike chain so its quire reassuring to see they are resistant to brute force attacks which is the most likely form of attack they would see in the UK where most house breakers are smack heads who wouldnt have the patience to pick a lock but try to snap it.
@basswitch5253 жыл бұрын
@@micrashedtruth
@Honda_Hooligan3 жыл бұрын
I have three of these locks securing the doors of my house. Seems like I made a solid choice so long as Billy Burglar isn't an artisan locksmith. 👍🏻
@RPRosen-ki2fk6 жыл бұрын
An interesting lock. Considering all the good engineering, it's a shame they didn't spend a few more cents on ... better pinning.
@lockpickinglawyer6 жыл бұрын
Agreed. This is literally easier to open than the first dimple lock I ever opened... the Abus d6.
@franklyjustty4 жыл бұрын
LockPickingLawyer sure you get asked a lot but do you test security systems locks maybe safe’s etc?.
@tidyboy724 жыл бұрын
Oh. These have just come as standard on new doors to my house!
@Droneguy-be1fy4 жыл бұрын
@@lockpickinglawyer I was about to purchase these euro cylinders to replace my standard Yale 70mm’s that are currently fitted. Which is the absolute best euro cylinder you would recommend?
@Droneguy-be1fy4 жыл бұрын
@@sounduser yes I ended up getting them they operate incredibly smoothly
@hydorah4 жыл бұрын
That lock is definitely what you need in the UK. I have a crap Yale brand Euro lock but it has decent snap protection. Snapping is the technique of choice... But yeah as some other guys observed, you picked it upside down making it way easier I suspect. I'd be interested to see you pick it the way it would be oriented when installed. In any event UK burglary is all brute force and ignorance and let's not forget you are probably the best lock picker on KZbin, not the average UK burglar!
@johncooper72424 жыл бұрын
fascinating to watch a master locksmith at work . Rarely see this level of craft skill in any field these days. Excellent presentation too
@tensevo3 жыл бұрын
The anti-drill department not speaking to the anti-snap department not speaking to the anti-pick department.
@n2n8sda5 жыл бұрын
The most common forced entry in the uk is snapping the euro cylinders as with the right tools its quick. This is still a good lock to protect against this method of attack.
@peterwilson75325 жыл бұрын
Another fantastic LPL autopsy. I have just started lock picking and quickly discovered the contrasting delights of Bosnian Bill and the Lock Picking Lawyer. This is an interesting lock, look at that core! Beautiful. I would be happy to have this on my own door as it has great protection from the typical attack vectors used by criminals. It's nice to see MI5 will be able to come and go as they please
@jeremiahthomas98332 жыл бұрын
One thing I have certainly learned from this man: If you pick with the right tools, nothing can stop you from opening the lock. Forget trying to break in, he never ever accepts that as an answer and is illegal. He never drills. Never used a rake gun. Does it by hand. Every bit of it. I love how precise he is. I am learning locksmithint because of him. He makes this look easy and kind of relaxing. I have been lockpicking my own locks so I can get into them myself. And my dads 50,000 lock collection with 5,000,000 keys. I have been able to attain what I need with this knowledge with a tyrannical 6 year old on the mix. This man the LPL is very informative. I appreciate it.
@TonyHoldenEsquire4 жыл бұрын
I had the key snap on me in one of these locks (a long story). The locksmith tried a drill first, when that didn't work he went onto a die grinder, it took more than 20 minutes to get through it. I was happy to have another one of these replace the original.
@ajjabajja91553 жыл бұрын
"locksmith" lmao
@ianhenry40665 жыл бұрын
Absolutely. Beautiful lock , excellent demonstration how to, thank you
@clairedeyes88105 жыл бұрын
A lot of thought has been put into that lock. Wow. I started picking a few months ago after seeing LPL on youtube. Envious of his skills. Im mot sure i could open the locks he does if i had the keys.
@bdf27186 жыл бұрын
To be fair, most attacks on Euro-format cylinders are going to be snapping attacks, because if you have the tool you need almost no skill to use it. Drilling next, no skill required but can be noisy. Picking least likely, because that needs skill. Of course, if this lock became very common then burglars would have to learn picking skills and then other locks would be a better choice. Right now, for all its faults, it might be the best of a bad choice. Not great, not good, but not as shit as the rest in terms of vulnerability to the most common attacks.
@ccmogs57576 жыл бұрын
As known most locks are made to combat destructive entry & also most smack-head burglars couldn"t even "pick" their nose properly............................
@Halberdin5 жыл бұрын
For unskilled thieves, automatic tools are available. I do not know if they just do bumping and raking and how well they handle security pins.
@JasperJanssen5 жыл бұрын
Halberdin pick guns are shit and only work on particularly vulnerable locks. Anti bump measures should stop that attack as well.
@LeeW5535 жыл бұрын
Most of the piky theiving gits in the UK don't go on a burglary with a pick set. They'll snap the lock, then drill and then smash a window
@omikronweapon4 жыл бұрын
there's also the matter of 'picking' the lock. As in, choosing. If you're a smack-head, you might not care about what the exact target is, so just move on to a lock you dont need picking skills for.
@bentoombs4 жыл бұрын
Holy crap!! Ridiculous overkill on the core but still left it that easy. Wow. Thank you mind blowing
@4u2nvme4ever5 жыл бұрын
Theres a big difference lock picking sitting down, under studio lights and angling the cylinder upside down in calm conditions, hand clearly penetrating the "door" space, no threat of any police or homeowner/neighbour seeing you with a baseball bat. How about middle of the night, cold, wearing gloves, balaclava over your face, pressure of being caught, trying to be quick...picking would be harder?
@forric236 жыл бұрын
Youve got the lock upside down - in the UK they are fitted with the core at the top and the pins and springs at the bottom.
@alanjenkins15085 жыл бұрын
I assume the passive pins fall into place due to gravity.
@Tom-nn9ey4 жыл бұрын
Exactly
@Nitrxgen4 жыл бұрын
@@alanjenkins1508 This seems to be a common misconception. The passive pins don't rely on gravity at all, the orientation of the lock makes no difference to its operation (same as picking). Those pins are designed to be forced into the key ONLY as the core rotates. The lock body features rounded dips where the passive pins can sit and jam up the core but only if the key is present and doesn't have those passive cuts for them to retract into. When rotating the core, they are forced towards the key, but if you're picking without a key then that literally acts like a key with all passive pins because there's no material to stop them being forced inwards. Also think about years after heavy use, locks and their pins get super grimey and don't move freely from gravity alone, imagine having a gravity-dependant lock in this situation lol.
@johnrich69284 жыл бұрын
@@Nitrxgen thanks, finally I understand passive pins.
@Greenmachine3056 жыл бұрын
Far more impressed by the skill employed in taking down the mechanism than the actual security it provides. It is obvious that picking skill always trumps design complication.
@oldsteve42913 жыл бұрын
When I trained as a locksmith I really struggled to pick this lock. ABS three star is similar and it took three TCT drill bits and twenty minutes to drill.
@moderatefkr66666 жыл бұрын
I'm stunned a UK company can still produce work of this apparent quality. However, LPL, I'm starting to detect a common theme with various types of locks. As you say, the manufacturers close one door (often very competently and comprehensively) yet they leave another wide open to abuse. There has to be a reason for this. In the case of the Chinese copies it's clearly a commercial decision to cut corners to save money. Many companies such as Master appear to trade off their public reputation and marketing claims which are often grossly exaggerated. But some serious companies clearly spend a great deal of time and money developing and manufacturing very high quality, clever and often sophisticated locks, and in particular cores, which are either extremely resistant to brute force attack, and are equally extremely vulnerable to picking or even raking or bumping, or vice versa. I'm not a lock picker. I lack the patience. But as a former experimental aircraft engineer, I can often recognise both the vulnerabilities and the potential solutions in each case. As a designer, I can often come up with a viable solution. Several actually. Indeed I've junked about a dozen so far. But as a dot connector, I'm left wondering if the lock manufacturing industry is not in a nod and a wink agreement with other parties (law enforcement, intelligence agencies, locksmith trade etc) NOT to make their locks invulnerable to ALL types of attack. For instance, where is the lock core buried 20mm behind multiple hardened spinners? Yes, I'm aware of the issues this would throw up in terms of manufacture, cost and ease of operation, and I've (eventually) figured out viable solutions. Some are actually even fairly simple and cheap to apply. Others are capable of turning an otherwise bar of soap level of resistance (as in the case of your bolt extractor, and Bosnian Bill's 40 second hacksaw attack) into a frustrating nightmare for even the most determined attacker. By this I don't mean I believe I can design lock cores. I can't. I acknowledge that is another discipline entirely, upon which I don't propose to poach. I can however design lock bodies that protect the core - from BOTH picking (denying the ability to tension the core) AND brute force attack, as well as actions that are equally resistant. This leaves me with the nagging question: Why can't they...?
@tortex16 жыл бұрын
Just a thought I've had, but I'm thinking they leave locks vulnerable to protect what's around the lock. If someone is determined to get inside no lock will keep them out. If the lock won't give way, the door itself could be broken, or the walls, the windows, the roof. The uninformed and "casual" robber might be deterred by a hyped up lock, while a professional would look to sidestep an annoying lock.
@captbeardy5 жыл бұрын
I think that the majority of domestic property invasions are by physical attacks and not lock-picking. LPL is a very talented picker, but your average Ned lacks the patience and tools to pick a lock, and the main job of locks is to a) intimidate or b) frustrate the burglar and induce him to move on to easier pickings. If however your property has been targeted they will be coming in one way or another unless you have turned your house into a fortress. It’s still disappointing to see LPL so easily pick the lock, especially when I consider just how much I’ve spent on these locks for my home.
@paulfitzgerald75135 жыл бұрын
Patronising prick! What makes you think you are so special?
@lmaoroflcopter4 жыл бұрын
@@paulfitzgerald7513 didn't you read? He's a former experimental aircraft engineer. I too used to design experimental aircraft. Aged 4. Using Crayola crayons. They had laser powered engines and one had feet instead of wheels! I guess that makes me a former experimental aircraft engineer too?
@markferguson33652 жыл бұрын
What a huge mess of pins!!! At my skill level, it would take me days and tons of coffee, to re assemble this lock! Huge respect to you sir!
@georgeliquor86506 жыл бұрын
Great pick, you make it look so easy, over here in the uk snapping is the main attack method, i suppose Brisant think its not worth bothering with anti pick protection but if this lock is so easy to pick then criminals may consider learning pick techniques which is a bad thing. I may change to a different manufacturer like Mul t lock to ensure the security of my customers.
@GTAmaniac14 жыл бұрын
That's why we should use anti-burglar mines
@W3OY-RAYАй бұрын
😂 I love the Pink Panther vibes. Makes me wish I was good at that stuff.
@SuperMartinCC3 жыл бұрын
those 'slugs' are meant to be the anti drill pins, which drop into place when you use a drill, and they 'should' stop your drill from spinning, therefore stopping you from drilling open the lock, I have a custom Euro 10 (+4) door lock (custom designed), and several locksmiths have tried, but those tend to drop into place and stop the drill..
@NeonXXP Жыл бұрын
A bonus of Ultion is that you can have all your locks made to match a single key, so one keys fits all for the whole house. You just have to call them and prove who you are.
@CleanFinish20235 жыл бұрын
Wow, I’m amazed how quickly they went, I have the ABS avocet 3 which took you much longer and was far more complex, it’s one of the longest picks I have seen you do, this one was alarmingly easy. I’m sticking with ABS for now.
@waynep3436 жыл бұрын
i wonder what would happen if you changed the anti bump stronger spring to a piece of silicone oring with a cross section of 0.104 and cut to length so you can just barely load the top pin into the shell.. that might make it actually pick proof and bump key proof as very few if any picks would be strong enough to lift the last pin to the shear line with a pick.. just a thought.. i know that most viewers here love to unlock locks.. i love to lock them securely.. Gerry L. Finch was a friend of mine.
@Halberdin5 жыл бұрын
The main problems may be temperature-dependent flexibility and aging effects under many thousands of stress cycles. The lock-pickers, on the other hand, would find a way to overcome it for sure.
@jameshunt83732 жыл бұрын
I've snapped these clean off because of too much cylinder sticking out of the door on commercial properties, leaving me with one pin to drill then I can turn the cam with a screwdriver. Even easier if they are fitted the wrong way around, snap and just turn the cam. Need to be picked or drilled on a residential building because the handles usually protect the cylinder from being snapped.
@josiejuicewilder89114 жыл бұрын
I have one of these on my front door, the door itself is solid and would resist a heavy beating, and the surrounding handle etc would make snapping impossible so this would only leave drilling or picking as an option. I would be worried about the picking but considering I live in an old house with sash windows, the door locks are the least of my worries.
@crashpilot50063 жыл бұрын
@LockPickingLawyer Good lock, I would recommend it tbh. Burglars are usually not in the market for learning a skill. 99.9% of the time they snap, bump, drill, or pull cores. and if any of those methods fail for over a few minutes, they bail out. I have never, *ever* heard of a break-in where the lock has been skillfully picked. Ever... at all... none, zip, zero, rein, nada... Anti pick is for that reason the lowest priority on chosing a lock to secure your home. But I would not say no priority, just the lowest.
@brianofireland1482 жыл бұрын
The Euro Locks are one of the best But you have to have the anti snap ones in the door. Most of the doors now have a locking system built into them so you are not relying on just the lock. There is a number of locking catches up the length of the door that engage. making them harder to force open. But when it is backed up with a vibration censor on your alarm system That will set the alarm off before and serious attempt is made on a door or window. No point in having alarm censors that only activate when a door or window is opened because they wont go off if the glass is taken out. The damage is done by then. Nice picking dhow
@MicroRCFiend5 жыл бұрын
I know you already picked it at least once but your speed is very humbling. Looking at the pins, i'm curious why it didn't take a lot longer. Big fan, massive respect from the UK.
@Polite_Cat6 жыл бұрын
i just dont really get passive pins. they've already done more then 50% of the work, it would seem, so why not make them active pins? they've already put them in the lock and drilled the key.. just need a spring and driver pin.
@JasperJanssen5 жыл бұрын
There isn’t enough room on that side of the core to put springs. You see the shape of the cylinder, right? You’d need a second protrusion from the cylinder for the second set of springs and drivers, and then nobody can use it because it doesn’t fit in any doors.
@lmaoroflcopter4 жыл бұрын
Install the lock the right way up (in the UK euro core locks are always installed core up top) and they come into play.
@Nitrxgen4 жыл бұрын
Passive pins only really provide a benefit in some situations, it's a really low budget way to imitate master keying for example. But in residential settings, it seems to be most common to prevent other locksmiths from copying your keys. Official dealerships of certain locks often get given a batch of pre-cut passive cuts in their key blanks so they can't be sold to third party, and it means your keys can only be cut by 1 locksmith only (which both increases security, and stops high security blanks ending up on unofficial markets)
@98dizzard3 жыл бұрын
@@Nitrxgen this is likely what they are used for. When a cloned key came onto the marketplace Brisant changed the keyway slightly. This resulted in new keys working on old locks, but old keys wouldn't work on new locks (i.e keyed alike). You could open the door by forcing the key in, but this risked the key getting stuck. Brisant really likes to keep control of their keys.
@asteroidsonsteroids2716 жыл бұрын
Well now I'm dying to see it drilled. Now that I think about it, I don't think I've ever seen a demonstration on KZbin or elsewhere of just how well or not well all these anti drill measures work.
@zacharyallen94116 жыл бұрын
AsteroidsOnSteroids I'm sure that's an expensive lock but I would also love to see just how well it holds up against a drill attack.
@meatyfrog52586 жыл бұрын
bosnianbill 910 He drills through a bike lock with drill protection.
@asteroidsonsteroids2716 жыл бұрын
Thanks! And holy moly, anti drill features are actually pretty damn effective.
@TsiolkovskySportingLocks6 жыл бұрын
Well given its 3 star rating and Sold Secure 312 diamond mark this means that it needs to conform to BS Standard 1303:2015 which states that "it shall not be possible to rotate the cam using a maximum torque of 5 Newton Metres without the correct key after drilling" - this drilling is for a set period of time. In the case of this lock I believe that is 5 minutes.
@RPRosen-ki2fk6 жыл бұрын
fromefun Thanks for that info, I couldn't understand the ... overkill of hardened steel. Now, it make sense.
@OcrimBob6 жыл бұрын
You ever feel like a fish out of water? No idea what the hell somebody is talking about? That is how I feel right now. I have no idea what any of this means and yet it is so captivating and fascinating that i simply cannot look away. Becoming a locksmith probably isn't for me, considering I would forget where most parts came from or have to go but i might pick up a new hobby of lock picking. My pops a few years ago was so glad that he bought a security lock like this and was relieved that he didn't need to worry about lock picks no more, well guess I'll have to show him something new. It is actually kinda scary how quickly you picked it open.
@omikronweapon4 жыл бұрын
start by watching some videos on cut-outs of simple locks, or animated ones. Or get a transparent lock yourself. With channels like these, I also find, that you pick some bits of info up each time you watch another one. It'll start to make more sense as you see repeating things.
@ooooetchyoooo5 жыл бұрын
The lock is upside down holding up the pins could u try picking it the right way up
@BLX1873 жыл бұрын
Didn't want to be defeated. KZbin is full of subtle manipulators
@zfunk3 жыл бұрын
Theres is a video by Lock picking noob with it facing the right way up its. Still very easy to pick.
@andybaker89564 жыл бұрын
Lock upside down. Fitted the other way in UK. Passive pins dropped down Mr Lawyer chops
@LordCarpenter5 жыл бұрын
WOW! So many countermeasures, and yet so easy to pick. It's like leaving a key under the door mat.
@Dazzc20116 жыл бұрын
Coming from the UK and being an English "bloke" 😄 I have to say I'm disappointed with the Ultion lock. As Michael Maynard has mentioned in his review it seems like the marketing of the lock got a whole load more attention than the technical side. The hard work seems to have been done but they left the lock half finished and vulnerable to picking. You would also have to question the method of testing for the lock to achieve the certification and security standard it has been awarded. A lock being "sold secure" and three star obviously isnt worth the paper its written on. Nice work LPL!
@ccmogs57576 жыл бұрын
Hey daz ., glad i"m Welsh with all these comments :]
@Dazzc20116 жыл бұрын
😱
@Halberdin5 жыл бұрын
Mr Maynard - in kzbin.info/www/bejne/i5SwlZlrlrdqgLs - proposed the theory that the locks from mass production were unreliable or easily jammed with long pins or high pin stacks in place. Deficient pick protection is the result. However, after watching many videos from LPL, BB etc., I can't understand how any straight cylinder with openly accessible pins can ever be considered picking-resistant.
@hassaization5 жыл бұрын
I don't think this lock being vulnerable to picking is that bad. Your average oik house burglar can *maybe* rake open a basic pin tumbler, but most of the time they go for brute force attacks, snapping, drilling, brick through a window (I love ultion's marketing BS that claims 85% of break ins are done with snapping) which this lock is beefed up to defend against. there are maybe half a dozen people with LPL's picking skill so this lock folding to him isn't much to write home about.
@sigor20115 жыл бұрын
Get this lock and see how fast you can pick it, please report back the result.
@Greenmachine3056 жыл бұрын
You have Jedi level lockpicking skill. Cudos!
@RPRosen-ki2fk6 жыл бұрын
Yes, the FORCE is ... strong in this one!
@AlbertLebel6 жыл бұрын
You did that very professionally LPL. Just amazing skill. I cant help but wonder why they make such a fantastic lock and still leave some pins passive.
@Viigan4 жыл бұрын
It's installed the other way round, so those pins drop down with gravity.
@zr50282 жыл бұрын
Now thieves will be able to pick these locks ... Thanks for your help. I hope they try it on your house first.
@THR33STEP6 жыл бұрын
Wow! Just make the ultimate lock by manufacturing the cylinder and bible out of hardened steel and put all sucurity pins in there!! They are already close with all that anti drill protection!
@chemusvandergeek12094 жыл бұрын
Fortunately, picking is seen as magic by many folks, and many criminals are too impatient to learn it.
@darkelfzombie50645 жыл бұрын
Love your video, really wanting to get into the lock sport, watch you and BosnianBill love seeing the pins so i can further learn how to pick
@mspeir5 жыл бұрын
Compared to most U.S. locks, this could guard Fort Knox!
@JustaRandomguy14 жыл бұрын
when he said "let me check if it's hardened steel" i expected him to bang it with a hammer and see if it'll stay in one peice. Either that or look up it's criminal record
@S3nt1n3l13 жыл бұрын
One set of locks I'd be interested in seeing if they can be circumvented are the new electronic keyless locks from Yale
@TH-tl1mk3 жыл бұрын
@LockPickingLawyer Can you do it again please, but make sure it is the right way up, ie. the core should be top with the word ULTION reading the right way up. Maybe those "passive" pins plays a part? Gravity works wonders.
@DWatso Жыл бұрын
Absolute artistry watching that pick, awesome work!
@UCCLdIk6R5ECGtaGm7oqO-TQ6 сағат бұрын
Had one of these that was jamming when using the external lock side so I removed/disabled the anti-snap mechanism ( 3:11 ) in the black part and all was good again.
@nolanjshettle6 жыл бұрын
I recently found your videos and found them to be excellent in quality and information. You've gotten me interested in getting into lock picking and I recently ordered a basic sparrow set. I'm a bit tight on cash and am looking for some inexpensive locks to practice with. I purchased one of the masterlock loto locks with the amazing core and a couple other locks that should be easy to get into. I was wondering if you have a video or could suggest a few different inexpensive locks that would be good practice/experience for single pin picking as that style is what mostly interests me.
@julianp2868 Жыл бұрын
Thank you for that LPL So the snapping is solved but the picking sort of easy still, however (I don't like saying this) 1 your a skilled picker, 2 the likelihood we would see a picker of your standing is unlikely. I have my reservations as these are on PVC doors and in practice, a burglar would be put off just by the anti snapping. If they were that determined you would go for the windows for ease of access. The video I saw of snapping is unreal in ease on the unprotected locks.
@tensevo3 жыл бұрын
It looks easy to pick (for somebody with the skills), but all it would need is to recess the key face into a deep counterbore and extended key so the lock picker could not see the lock face.
@jamesg13676 жыл бұрын
LPL, you have good hands. I'm talking function here, not appearance. :-) Few, I think, would be the thieves who would understand that lock's internals well enough to regard it a soft target for picking. All those pins! And that impressive keyway. But that's "security by obscurity" which we IT guys well know is a flimsy defense at the end of the day. Not to mention you've just dealt the obscurity a fatal blow.
@MrSagsta3 жыл бұрын
What's the difference from this lock and the newer 3star plus apart from having a thicker key? Also is there a better lock available in the UK
@Dowlphin2 жыл бұрын
Imagine investing all the effort that goes into lock designing and making into creating a society where you don't need locks.
@daimenworrall6 жыл бұрын
Most criminals in the UK won't bother trying to pick. Its usually drill, crowbar and boot. Its a different market i guess.
@joshuadunsire72183 жыл бұрын
I know quite a few people who have Ultion locks very similar, if not the same as thos on their doors, it seems to be quite a common lock in the UK
@44Magnum66 жыл бұрын
If you were locking your motorcycle which lock would you want? Most bike thieves don't know how to pick locks but they do know how to operate bolt cutters or power cutters/grinders. Some will know how to pick. I need a good strong lock ASAP. Thanks.
@molsky132 жыл бұрын
love to see you pick these locks under stress bet the out come would be a lot different
@Leonslockpad6 жыл бұрын
Great job my friend very nice picking😊😊👍😎👍👍
@regularcyclist4852 Жыл бұрын
I have a very similar lock, though from Yale (Platinum 3 Star Cylinder range) which uses a different key profile. Not sure how, if at all, it changes pick resistance. As the door sits directly under a CCTV camera I can’t see anyone spend time trying to pick it though and will likely head straight to more destructive techniques.
@COLDMKULTRA2 жыл бұрын
Great video ... but the fact still remains ... Ultion locks are a nightmare for most UK Locksmiths to get into! Therefore, the average thicko scumbag UK burglar, has very little to no chance of breaching one of these locks. (and certainly not by picking)
@garybob46 жыл бұрын
yo LPL... have you ever considered contacting lock manufacturers and offer your 'services' - maybe an "LPL Certified" lock; where they send you locks which you test and offer suggestions which increase a lock's security. after you're satisfied with the lock, it can be stamped with your logo and promoted as 'LPL Certified' maybe you could even feature these locks on your videos. I would definitely buy "LPL Certified" locks for my house!
@opaqueentity2 жыл бұрын
Then someone picks, drills it etc and he looks like an idiot and there is no longer any value to it. It would happen at some point by someone skilled such as himself.
@danielroglich33094 жыл бұрын
Great picking brother and thanks for the review!
@andyp91317 ай бұрын
I have this new lock it's 3 star ⭐ it's,£2000 now we dont hage lock picking in the uk like somone else said its lock snapping that they use itsna very good lock which like u said had a pint that locks the cam off so its very secure
@MichaelMaynard6 жыл бұрын
As you know I have some very serious concerns indeed about this lock, detailed review is here. kzbin.info/www/bejne/i5SwlZlrlrdqgLs Great marketing but deeply flawed design and pinning.
@loren4816 жыл бұрын
Link is dead?
@tipenengapuhi6 жыл бұрын
Loren Arnold Works for me?
@TsiolkovskySportingLocks6 жыл бұрын
works for me
@DonzLockz6 жыл бұрын
Works in Australia. :)
@moderatefkr66666 жыл бұрын
Off the scale dedication to your task Michael. Excellent work. You and LPL are in a class of your own here.
@CaptainDangeax5 жыл бұрын
I thought those keys were more secure than the ones with teeth on one side. Watching this, I realise this is not true.
@JollyPeanut6 жыл бұрын
Fast picking, Awesome..
@prjndigo4 жыл бұрын
The steel gumdrops seem to be a combo of anti-drill, anti-shim and tolerance wear protection. Try shoving a shim up in that one to see what the tolerance is on the slugs. They *could* also be magnetic dead-pins.
@daleerickson5546 жыл бұрын
I remain unsure of how a "snapping attack" works. I have a guess but, having never heard it explained or demonstrated, I don't know if I'm right. Is this something you could address or even demonstrate at some point? As always, I find your videos informative and entertaining. Thak you and keep up the great work.
@benediktschmitz93126 жыл бұрын
Dale Erickson snapping a lock ist pretty much just breaking a lock on the weakpoint in the middle of the lock where the actuator is. If the lock sticks out a bit you can grab the front of it with a pair of pliers and bring a lot of force on it and most locks just break in half.
@daleerickson5546 жыл бұрын
That's pretty much what I thought. However, in the US locks don't hang out of the door far enough to get pliers on it. does this happen more frequently in other countrys? I've also noted that most "euro cylender locks" do seem a lot longer than I'm used to. I wasn't sure if they extended outr of the door or, if the doors were just thicker. Thanks for the explanation.
@benediktschmitz93126 жыл бұрын
Dale Erickson in most cases the doors are thick enough that the cylinders fit. However on thinner doors (many of the non-frontdoors) they can stick out a couple of millimiters.
@AalbertTorsius6 жыл бұрын
kzbin.info/www/bejne/fKLLmYuvh7Srh68
@daleerickson5546 жыл бұрын
Thanks, Aalbert Torsius, this is what I was looking fo, though why I searched under the lock sport channels I watch and notYouetube in general remains a mystory.
@jaybonkersbonkers36133 жыл бұрын
Snap the front part with out trigger the center locker then you have less to pick
@RadDougall Жыл бұрын
Ace video. Would love to see the same thing for competitors to this lock like the Avocet ABS 3 and Yale Platinum 3 star. Those Ultions are expensive and if they can be picked so easily I hardly see the point. I wonder if the others are any better?
@mariusschmitt58554 жыл бұрын
DID HE SAY "THIS CORE IS REMARKEABLE". ? This lock is a mustbuy for the UK LPL does not often say "remarkeable" ....... right?
@softwaretechniker3 жыл бұрын
Wrong, when you listen the other words as well: "Very very easy to pick [...] but drill and snap protection" - In other words easy to open for a thief but hard to open for firefighters in case of emergency. I consider this lock a fail.
@jukeboxjonnie Жыл бұрын
The first thing to do before installation of these locks is to file off the displayed company name to give yourself an extra security barrier against pickers.
@grmmmmhpph6 жыл бұрын
Hmm, that's a shame - I've got a full set of these on my house. So, if I wanted something that's better as an all-rounder what's actually the best these days?
@lockpickinglawyer6 жыл бұрын
Nothing’s perfect. This is better than most.
@belperite5 жыл бұрын
As has been said elsewhere, when confronted with a lock like this (or Avocet ABS's like I have) intruders are much more likely to attack windows (including just smashing them) if they want to get in. LPL is picking in ideal conditions with a high degree of skill, your average scumbag in the dead of night wouldn't have a chance.
@SnabbKassa4 жыл бұрын
I'm looking into Abloy euro cylinders. They do exist. But they are more expensive. I know they last longer, and as dd locks, they are harder to pick. But I would love to find out more about how well they cope with snapping. I suspect/worry that if snapping does not occur in Finland and Scandinavia then they are not designed to stop it.
@RWBHere4 жыл бұрын
@@belperite He's also picking the lock upside down. Orientation is important with these, and with some other, Eurolocks.
@themadhatter47616 жыл бұрын
Excellent pick and gut thanks for the video 👍👍👍👍
@aettic Жыл бұрын
What kinds of things would have made this lock harder to pick? More security pins + variety? Spring weight variety? The passive pins actually doing something other than adding to the pin count?
@the_urbanphantom3 жыл бұрын
They have now upped the guarantee to £2000 if someone gets in via snapping
@MG-uo8kj2 жыл бұрын
Well, you summed this up exactly as I was thinking, all that anti this and that,,,butbp it’s picked in seconds. What’s the point ?! It’s bin material.
@two_tier_gary_rumain6 жыл бұрын
11:03 where did that little spring come from in the core? Looks like there's one solitary hole sitting at the front. What would that be for?
@lockpickinglawyer6 жыл бұрын
Probably a 12 o’clock detent.
@two_tier_gary_rumain6 жыл бұрын
I see. BTW, I was tooling around on eBay last night, looking at locks when I came across this one - www.ebay.com.au/itm/New-70mm-Aluminum-Door-Lock-Cylinder-Home-Security-Anti-Bump-Drill-Pick-3-Keys/122839667809 I thought you might get a kick out of its description - New 70mm Aluminum Door Lock Cylinder Home Security Anti/Bump/Drill/Pick
@lockpickinglawyer6 жыл бұрын
Yup... it’s complete 💩.
@two_tier_gary_rumain6 жыл бұрын
I'm tempted to buy one and drill it. :)
@Lastindependent5 жыл бұрын
Really great educational video. How would this compare to a more well-known brand in the UK like Yale 3 star TS007?
@Pendragon5013 жыл бұрын
This lock is a piece of art.
@Fvckoffjosh5 жыл бұрын
Just put 6 different security pins in there and that thing is really save
@simonslocallocksmiths76594 жыл бұрын
I have seen these snapped in doors by fellow locksmiths and they can snap the steel straight in the middle just like the old brass.
@mfx13 жыл бұрын
Can you re-visit this and pick it the correct way up?
@zfunk3 жыл бұрын
Lock picking noob has video of it facing right way up its still very easy to pick.
@danielcrowther50326 жыл бұрын
I was just looking at your videos and noticed that there is a Hugo padlock that uses the same key as ultion but it has trap pins and looks harder to pick.
@lockpickinglawyer6 жыл бұрын
Good eye. The profile is the same. I just checked.
@NEMOTHEMORMON3 жыл бұрын
Good Spot!
@michaeldomingos33005 жыл бұрын
Shouldn’t you try to pick the lock the right way up? Surely picking it this way isn’t right? The pins will be depressed due to gravity. I’m not a locksmith, but picking it this was doesn’t make sense.
@DADA16075 жыл бұрын
Ultion now have a new WXM cylinder just out, is this one any better?
@GMCNightmareRepairs6 жыл бұрын
This isn't specific to this video but I'm looking for a pick set good quality and with a good variety of picks and tension wrenches at an affordable price it would be greatly appreciated
@olivialambert41246 жыл бұрын
I'm interested, would this be a good project lock? Replacing key pins and messing with the core a little? Or would that really not be viable with the short driver pins making for an easy pick no matter what you do? I'm in love with the destructive defences but everything else seems to miss the entire point of a lock, preventing entry without a key.
@7H3541N75 жыл бұрын
Looking at it, I'm guessing they've made it to combat the most likely attacks. It would be interesting to know how many locks are defeated by brute force Vs picking. It's just like tanks being more heavily armoured at the front than the rear.
@tomslastname556010 ай бұрын
I swear this channel is going to make key locks obsolete, lol
@isawadelapradera64903 жыл бұрын
I was sorely dissappointed when that hardened steel check didn't involve a hammer and heavy banging
@KirstyTube Жыл бұрын
I'm in the UK and the locks just slow stupid peeps. The cat is my alarm 😂
@johanwamokolobetsi60946 жыл бұрын
Those slugs are in line with the anti drill pins I suspect that the slugs are supposed to jam the core if someone tries to drill it
@lockpickinglawyer6 жыл бұрын
How?
@johanwamokolobetsi60946 жыл бұрын
sorry for the delay in response. It is all to do with the direction of the drill is rotating. If it is clockwise it will jam the 1st on the right the 2nd on the left then the 3rd on the right. The drilling force is applied to those anti drill pins then the end will push out against the slug and jam the core firmly so even if you managed to drill out the key pins the core will be jammed so tightly that it cannot turn. Also I am thinking that people would drill then use a bolt extractor to turn the core. If they did these would also jam and prevent the core from turning.
@DaveJudd5 жыл бұрын
Can you pick it in the door the right way round in heavy rain please. lol
@RWBHere4 жыл бұрын
On a windy Winter night.
@flyfaen16 жыл бұрын
Unless installed with ceramic drill protection, not even a lock made entirely of hardened steel would stand a chance against a CBN-coated tungsten carbide drill...
@margaritanoir2 жыл бұрын
I am curious- does this leave any marks on the lock? Our lock (from a Gardesa door from 2010 with some Euro cilinder- im not there now to check which one it was) was perfectly picked. No marks and the couple of locksmiths who checked it say the security door wasnt locked. They claim a card was used but I've once tried the card technique myself when locked outside and I couldn't get even the thinnest paper in there (I had learned the technique from videos). Somehow I dont think I made such a grave mistake to leave it unlocked and have different recollections but Im starting to doubt myself.. All my family was abroad and I was alone before leaving to join them.. The apartment next to ours wasnt even touched- noone lives there although its full of furniture and stuff. However, the apartment below us where a family with children live, their door which is newer than ours (but allegedly not as secure according to my non expert brother) had marks on it. However the burglars didnt manage to get in. Im so confused as to how the burglars unlocked our door. I wonder whether this was accidental or actually done by experts who targeted us specifically and the attempt at the door below us was just a decoy (I was being harassed lately)