2020 CRF 110 PIT BIKE BUILD - ENTIRE SERIES

Full build video on my 2020 CRF110 project. When I started my project I had questions about a few mods that I couldn't find answers too, so I covered everything I couldn't find throughout this video. If you're looking for the timelapse of teardown/build and final reveal that video will be linked below:
• 2020 CRF110 PIT BIKE B...
Tri-County - tricountyhonda.com/
Nick Fratz-Orr Shout Out -- / nfomx144
POWDERCOATING - / mountainstatepowdercoa...
Helpful videos I used:
Building Forks: • BUILDING MY CRAZY CRF1...
BBR Rear Spring Change: • BBR CRF110 Shock Sprin...
FULL PARTS LIST:
Exhaust - amzn.to/3b3X66L
Bars - amzn.to/34zNCO3
Red Bar Pad - bit.ly/2yaSP2C
Grips - amzn.to/2KbxCst
Throttle Cable - bit.ly/3caGM4g
Full Size Throttle Tube - bit.ly/2Ry2TK6
Shorty Front Brake Lever - bit.ly/3b4km4r
Extended Brake Cable - bit.ly/2x532O0
Fork Springs - bit.ly/3bfIOQk
Damping Rods - bit.ly/2yehWBF
Rear Shock Spring - amzn.to/2V3G8Qw
HD Spokes (front) - bit.ly/3a25bHU
HD Spokes (rear) - bit.ly/39WN0Dm
Rim Locks - amzn.to/3a2Znhd
UpSweep Peg Mount - bit.ly/39YfT1W
Skid Plate - bit.ly/3cauFnM
Shifter - bit.ly/2V2BG4p
Chain - amzn.to/2wDTn0Q
Rear Sprocket - bit.ly/3a25kLs
Red Billet Engine Plugs - bit.ly/2VlL5mx
Steering Stem Bearings - bit.ly/3cbymcP
Fork Seal Kit - bit.ly/3aZjkGW
Camera Gear:
A Camera: amzn.to/2JoCv12 (used in this video)
B Camera: amzn.to/2JoCDxy (used in this video)
Vlog Camera 1: amzn.to/2PlXrtE (used in this video)
Vlog Camera 2: amzn.to/2qJCNJr
Wireless Mic - amzn.to/380dItR (used in this video)
Drone: amzn.to/32JjHRT
GoPro7: amzn.to/2JkByXC (used in this video)
GoPro8: amzn.to/2PmdF5K (used in this video)
Metabones Adapter: amzn.to/2p5it52
My Favorite Lens: amzn.to/367A6Sg (used in this video)
16-35mm Lens: amzn.to/2JoXPnd (used in this video)
24-70mm Lens: amzn.to/2JnlVyI
70-200mm Lens: amzn.to/2pf5yxk
14mm Lens: amzn.to/31O4IF0
35mm Lens: amzn.to/2qNTZ0F
85mm Lens: amzn.to/367pyCF
Tripod: amzn.to/2pWhW5u
Video Head: amzn.to/2WgqVKL
Drone/Gear Backpack: amzn.to/2MMjAQ2
Camera Straps: amzn.to/2NhRk6I
www.loganmarksmedia.com

[@sojaracing260]

This has to be one of the most helpful AND entertaining video on building a 110 thank you so much. Definitely am subscribed

[@loganmarksmedia]

Soja_427 much appreciated! I try to sneak in some Easter eggs when I can lol

[@randymoreland4344]

Hi Logan, thank you for putting in a good word/review for Mnt St. Powder Coating. It is very much appreciated. Looks to be a top notch build and very informative video. Cant wait to see it completed!

[@loganmarksmedia]

Randy Moreland absolutely! Super excited with how everything came out - I have more headed your way very soon!

[@izackmayfield7690]

most helpful video and thank you for putting the links in your bio

[@Jazsft]

Awesome bike man 🤩 Good to see I’m not the only one who sits down to do everything hehe

[@ch33ch4]

My stunt bike matches perfectly dope colors👍 anyway crazy good video!

[@caleb7194]

Bro those wheels are sick.

[@james_holm]

Badass Outro!

[@chrismorgan1366]

The Honda 110s so dope 👌

[@loganmarksmedia]

This might be one of the only bikes I’ve ever actually really liked the stock graphics too.

[@chrismorgan1366]

Logan Marks right the whole bike looks really good in General

[@cwbfmxer]

11:25 when you say “hey Siri” activated Siri on MY phone! Thought I was trippin and rewinds and it did it again! 😂 Anyway, super helpful video! Thanks for all the info!

[@lancairw867]

Impressed with the details and time you put into the 110 👍🏼. I’m a Dad with kids riders here. We have a KLX 110, 17CRF 110 and a 2019 CRF 125. I’m 6’0” and have rode all bikes. Love the 110 but to me a fun pit bike, the perfect size for teen/adult would be the Honda 125 ( not to small not to big and only a few lbs heavier ).? I know it has a clutch but can handle more weight, much more comfortable and has the bigger motor. ? Edit: I have a KTM 250 for myself but enjoy playing around with the smaller bikes.

[@loganmarksmedia]

Lancair W I have a XR100 from when I was a kid that’s on my to build list. It’s basically what the CRF125 replaced and I agree on the most fun. They are def a little more comfortable - but once you build the 110’s up a little that little compact ripper is hard to not put a smile on your face lol. Make sure you check back soon, I have a KLX110 I’m building, 3 50’s, the XR100 and then an 03 CR250 and an 02 CR125. Lots of winter projects coming up!

[@aeror115]

Is it necessary to buy extended cables for the wider pro taper handlebar on a stock crf110 ? Cheers mate

[@morromk7538]

God bless ya Logan homey

[@reeseraymond2016]

i like how nicks playing cashmere by led zepplin good taste

[@scottwhitehead4278]

Hey did you have any wiggle on the “red”shock extender?

[@braxtonsykes3534]

Can this bike pop a wheelie in 1st gear if you just sat down and full throttle

[@michaelpattee6669]

did doing the crf125 throttle tube/cable/housing make it a 1/4 twist throttle? i am trying to make mine a 1/4 twist but there is not much info i have found on how to do so.

[@loganmarksmedia]

It's just the stock crf125 tube and cable. It doesn't feel quite as quick as a 1/4 CR throttle - but it also doesn't feel as bad as a 1/2 turn. I don't mind it at all and my big bikes have 1/4 turns so that's what I'm used too.

[@squarecrawler9551]

Noticed your part number for rear BBR spring was for 18’ and older. Did it fit your 20’ just fine? Thanks just curious because the 1205’s are all out of stock

[@loganmarksmedia]

Walleye Willy no they are different sizes! Thanks for catching that I must I’m have grabbed the wrong link, not surprising I have a ton of stuff on that list lol

[@danielbowering9354]

Awesome video mate love the build looks like you have a pro circuit pipe in the reveal ? Did you change out the other?

[@loganmarksmedia]

Daniel Bowering nope. Just put pro circuit decals on that pipe.

[@danielbowering9354]

Logan Marks okay that’s where you got me lol 😉 and awesome build Logan keep up the top work mate 👍😎

[@I53-624]

would you recommend putting inverted race forks on my 110 I’m thinking about it instead of bbs

[@loganmarksmedia]

AldenG I would like to swap mine too but the there are a few issues with doing it. The main issue will be finding a set of triple clamps that mount up without a custom steering stem. The issue after that is that you’ll most likely need an extended swingarm. BBR is the only company that makes them that I know of and they are backordered for months to get one.

[@trevorvoss6487]

Where did you find the swing arm bushings

[@christophecouture3332]

where do you take every piece?

[@rayv882]

Nice job with the video and the bike, did you have an issue with your throttle tube staying stuck open after installing those bars and longer throttle tube?

[@loganmarksmedia]

no. that's what the extended cables are for

[@HONDAracing22hca]

Hold up piranha exhaust works on the 2019+??

[@Twisted.tv12]

what is the song at the end?

[@carsonjohnson1845]

Hey were did you get the bling kit

[@colehicks8117]

Awesome video. Why not blue the pipe?

[@jayverstraeten4670]

Which bar bend did you go with

[@zac0912]

My 10 year old has this bike and loves it, lol. I really wish it had a clutch though. Thats the one thing i dont care for, wish they made it an option. Cant wait to move him up to a 125 and get him working a clutch, he just has to get taller.

[@Chumbucketsecret]

There have been clutch kits since 2014

[@lucazolezzifassino]

Hi Logan, Do you know if I can adapt an exhaust procircuit ti6 with the same modification?, thanks

[@loganmarksmedia]

I would assume all of the pipes made for the 2013-2018 would be the same and fit a 2020 with the same mods.

[@lucazolezzifassino]

@@loganmarksmedia Thanks for the answer, last question can you tell me the measurements of the peace mod, thanks !!

[@taylorwilliams2376]

Could I use just the throttle tube for the 125 and keep the same throttle cables to upgrade to full size grips?

[@loganmarksmedia]

Yes, as long as your stock cable is long enough. Because I added taller bars and the damping rods my stock cables were too short

[@TheJameskerr]

Did you have stock clamp?

[@loganfowler5175]

What kind shifting lever and rear brake lever did you get?

[@loganmarksmedia]

Logan Fowler brake lever is powdercoated stock and the shifter is one from tbolt. Check the link in the description for the exact one!

[@marcjonmeniano9664]

do you have a junk dirt bike like 110cc?

[@mackelook0633]

Were did you find those rims?

[@HaZeyTrades]

What year crf125 is that throttle from? And are you talking about the crf125 two smoker or the crf125f trail bike?

[@loganmarksmedia]

Nick Morris links are in the description for parts. Crf125 is the little trail bike the two stroke is a CR125

[@HaZeyTrades]

Gotcha. I checked it it was just part number link. But it didn’t show the year. Was jw if you knew.

[@tannerwestrick2618]

Did you think you’ll need to add a spacer to the rear shock due to the front sitting higher?

[@loganmarksmedia]

Tanner Westrick yes. I have one ordered it just wasn’t here in time for the video.

[@tannerwestrick2618]

Very fast response thank you. what size did you end up getting for the rear?

[@loganmarksmedia]

@@tannerwestrick2618 yea man. On lockdown in Maryland so I'm on KZbin ALOT lol - tboltusa.com/store/pit-bike-rear-shock-extender-p-1067.html

[@tannerwestrick2618]

Logan Marks awesome thank you just subbed to you!

[@turbobino6496]

@@loganmarksmedia Hi, just checking, would these spacer on the link fit the on a 2020 CRF 110? It says crf 50 or klx 110 on the website, thanks for clearing that up and love your videos!!

[@austintradup6446]

What size socket is the triple clamp top middle bolt

[@loganmarksmedia]

30mm

[@billywardynski9113]

with the pipe and sliencer why dint you just geta yoshimura exhaust or fmf??

[@loganmarksmedia]

Not a fan of how they look. I mainly did it because I was holding out to see what other options come out. I would say as of now the Bill’s pipe is probably the best looking one for the 19+, but I’ve been running that piranha for months now and have had no issues.

[@ForrestJones214]

Did you clean the carb? 😁

[@loganmarksmedia]

new jets and fresh blinker fluid

[@dirtbiketelevision6865]

What kind of bar bend is that

[@gsrport1]

how in the world did u get the swing arm bearings out ?

[@loganmarksmedia]

Drew Drew my powdercoat guy actually took them out for me with a press! I took the same style ones out of my 50 though - use a vise and two sockets. One that’s the size of the bushing and then one on the other end that’s large enough for the bearing to push into. They’re a pain to get out but without a hydraulic press the vise method is by far the easiest!

[@gsrport1]

Logan Marks u the man thx bro just hit u up on ig same question thx dude

[@overzxne1304]

Was it flat packed

[@alessandropezzella4505]

Top

[@fazecleanup2578]

Can u build my 1990 suzuki 250r 2 stroke

[@justinnoss5900]

I don’t think your part number for the extended brake cable is correct. I’ve ordered 2 (45450-GN1-A21) and both are identical length as stock and too short for extended bars and bbr triple clamp. Can you double check what you used. All crf125 are showing hydraulic front brakes from what I can see....?

[@loganmarksmedia]

That’s the part # for a front brake cable off of a CRF80, it’s what I used and it was definitely longer than stock - I don’t have aftermarket triple clamps though, just stock ones that are powdercoated. You’re adding another inch or more with those. Try the cable off of a CRF100 (45450-KN4-A11) or the CRF110 +5 cables are in stock lots of places. (www.faster-minis.com/products/brake-cable-honda-bbr-crf-110?variant=8434137923626&gclid=CjwKCAjwx6WDBhBQEiwA_dP8rQOtgO7NBPcJfLCqu2JNDLsrpxypxH0tui4Z6-VSNL0Z5GTs4zNhuRoCgfQQAvD_BwE)

[@justinnoss5900]

@@loganmarksmedia thanks I’ll try the bbr +5” cable. Great video btw!

[@JacobsLifestyleWreckedByNature]

Help me rebuild my 110. That thing clean

[@krispykreme8249]

What tyres you running bro?

[@loganmarksmedia]

Since the bike was brand new I just put the stock ones back on for now. Whenever they wear out I'm going to switch to Dunlop MX52

[@krispykreme8249]

Logan Marks cheers man! New sub from Australia here, loving your edits dude...

[@thomassylvestro9041]

Awesome job, what tires did you use. Are they the stock tires

[@loganmarksmedia]

yes. leaving the stock ones on for now. May as well wear them out before I get a new set.

[@VDUB26]

Hey Logan, are out interested in selling anyof the stock parts?

[@loganmarksmedia]

Yea, shoot me a message on IG or you can email - [e-mail]

[@kaysonosborn5247]

If ur still looking for parts I got a couple things I’d sell

[@VDUB26]

Kayson Osborn All I have now are a klx 110 and a yamaha 110. Do you have any parts that will fit either of them?

[@ponderosapines]

Let's race

[@loganmarksmedia]

that KTM don't want none of this monster lol

[@gdrozd555]

Is it me or is the wheel still crooked at 6:40

[@carsonjohnson1845]

Just you

[@gdrozd555]

@@carsonjohnson1845 haha. Its fcked. Good job

[@DizTV]

The exhaust needs unbolted just to remove the rear fender, doesn’t it?

[@corz758]

No

[@DizTV]

@@corz758 Clearly you don’t have one

[@vinceelanor3622]

7:00 Dragula!

[@jeffreyford3076]

I want it

[@LaneSplitting247]

Hey man we have a little track in Morgantown, wanna come rip?

[@loganmarksmedia]

NICE! My parents have a house out there, weather probably won’t be great for awhile - but I’ll def come rip when it’s not freezing outside lol

[@AUGH967]

hey im just saying no hate but you should keep it always stock but its nicer when you have aftermarket stuff but aftermarket stuff makes the bike ware out faster

[@pillaryclinton6187]

It was kinda hard to understand you maybe English isn't your first language lol. However no you shouldn't keep it stock it's boring and doesn't show your unique style and flavor. Plus most the mods are to make it ride better and more comfortable for him. Nothing is going to wear it out faster then normal unless he starts modding the motor significantly and even then so long as it's done right and maintained well he shouldn't have any issues. Maintenance is key to anything running for a long time. Only thing stock is good for is a warranty I don't think he's worried about that he ready for fun.

[@AUGH967]

@@pillaryclinton6187 English is my main

[@SookaMaDeek]

Your killing me I need to hear it!!!!!😭😭

[@loganmarksmedia]

bryan loleas check the video on my channel about installing the exhaust - there is a clip at the end.

[@saltycrackadventures6657]

F