Adding extension to Fox Float MXR - 2020 CRF110

I finally found a Fox Float MXR rear shock. In this video I show you how we made a DIY vise clamp to remove the shock eyelet and install the extension piece. Watch the end of the video for a follow up and explanation of a few of the questions most people ask about this shock. If you have a question I didn't answer be sure to drop it in the comments!
Part Links:
Wahl Bros. Racing 1" Extension - bit.ly/3bOOOQt
Wahl Bros. Racing 2" Extension - bit.ly/3bM26Nz
Wahl Bros. Racing 2.25" Extension - bit.ly/2SfD01U
Fox Float Rebuild Kit - amzn.to/3cR8Vh0
Fox Float Fluid - amzn.to/2SjG2Ce
Full CRF110 Build Video - www.youtube.com/watch?v=Ex3G3...
Sponsors:
Tri-County - tricountyhonda.com/
Camera Gear:
A Camera: amzn.to/2JoCv12 (used in this video)
B Camera: amzn.to/2JoCDxy (used in this video)
Vlog Camera 1: amzn.to/2PlXrtE (used in this video)
Vlog Camera 2: amzn.to/2qJCNJr
Wireless Mic - amzn.to/380dItR (used in this video)
Drone: amzn.to/32JjHRT
GoPro7: amzn.to/2JkByXC (used in this video)
GoPro8: amzn.to/2PmdF5K (used in this video)
Metabones Adapter: amzn.to/2p5it52
My Favorite Lens: amzn.to/367A6Sg (used in this video)
16-35mm Lens: amzn.to/2JoXPnd (used in this video)
24-70mm Lens: amzn.to/2JnlVyI
70-200mm Lens: amzn.to/2pf5yxk
14mm Lens: amzn.to/31O4IF0
35mm Lens: amzn.to/2qNTZ0F
85mm Lens: amzn.to/367pyCF
Tripod: amzn.to/2pWhW5u
Video Head: amzn.to/2WgqVKL
Drone/Gear Backpack: amzn.to/2MMjAQ2
Camera Straps: amzn.to/2NhRk6I
www.loganmarksmedia.com

[@rg8707]

Good stuff, this helped out a lot. Any chance of a complete rebuild on the MXR ? Thanks

[@chrismorgan1366]

You lucky duck getting that shock especially for what you payed that plus a frame

[@RyanDfmx69]

Also looking for a rebuild video on these. I have 2 that I purchased years ago. 1 of them I ordered with an extension from the factory for a CRF70. It stuck down on me the other day and blew oil out of it but still kept air pressure. When I went to rebuild my first one a long time ago I let all the air out of it and started taking it apart and it still had pressure built up inside and blew apart on me so be mindful of that it went to fox for a rebuild. But I guess they charge quite a bit to do them now...

[@jamesschutte708]

I make a soft jaw out of wood with the same size hole for rebuilding my fox float mxr. The problem I'm having is it won't stay still to remove the bottom Eyelet to rebuild it. Any idea's on how to keep it still?

[@blainleblanc5866]

Curious to see how the bigger extensions work out. I also luckily, just found the mxr and sent it to fox and had them rebuilt it. I ended up going x2 of the wahl bros .75 extensions and it perfectly leveled the bike with the bbr springs/rods.I found that with the springs and rods it raised the bike exactly 1.5 inches in the front.

[@loganmarksmedia]

My thought is that with the 1" extension it matches the stock shock eye to eye. The normal extension people use on stock shocks with the BBR rear spring is 1" - So I think the 2" extension will be exactly what I'm looking for, but we will see!

[@ryanoakley8426]

The float is a 10.25” shock vs the stock which is 11”. I assumed the .75” spacer would bring you to stock ride height, and then another 1.5” for the dampeners and springs, so the 2.25” seems like the call. Any results from the bigger spacers Logan?

[@MrJeffry248]

@@loganmarksmedia Do you have any feedback on the 2" wahl bros extension? Before I swapping my .75" to the 2"-- I'd like to hear your results. Thanks in advance

[@kermitthefrog1865]

It be cool if u make a shock rebuild video on that fox float!

[@loganmarksmedia]

Squints Palledorous I found one good video on here but the next video will be the rebuild and then testing with the 2 and 2.25” extensions!

[@nickcardoza6543]

Do you know a good video on rebuilding the fox float Mxr

[@mikeyoung9666]

Question… I have 2022 KLX-110 L. Just bought it for my 65lb 9 year old. The stock rear suspension is stiff ! Even with me on at 215lbs I noticed almost no sag for a 65 lb rider. Thoughts ? Thanks How soft can you make the Fox float shocks ? How low can they go for air pressure ? Or are they suited only for heavier adults riders ? I need something way softer than the stock shock/spring.

[@youngsmokey3009]

What's up man, Just a question. What is the new version of this MXR fox shock? I have a brand new 2020 crf110 and looking to just get stiffer rear shock without getting more travel as i am keeping the stock front shocks until i can get some bbr ones sent over.

[@loganmarksmedia]

There isn't a new version of it. That's why people pay such stupid money for them lol. Your best bet to stay stock height would be a BBR rear spring. That's what is on mine right now and I just got an extension for it as well. I literally have nothing bad to say about it - haven't rode it with the extension on yet - that's the plan for the next video.

[@benulis5555]

I am currently looking for one, any tips?

[@ryanromano9116]

They do make that shock now, 2020 fox float mxr for the crf50, it’s 280$

[@loganmarksmedia]

Ryan Romano no. The MXR was discontinued in like 2012, I just talked to someone at Fox last week because I have another one that needs a part that they no longer make.

[@ryanromano9116]

Logan Marks my bad I was looking at the dps

[@loganmarksmedia]

Ryan Romano yea I talked to the kid at my local mtb shop and we went through all the rear shocks they make and none of them are close or would work on mini bikes. Sucks because the shock is awesome.