Logitech MX Master 3S - PERFECTION

[@TwstedTV]

I just purchased this mouse and just got it today. And OMG, I love love love this mouse. Best mouse ever. I own several Logitech mouse like the G500 and 500s and a few others. I got tired of having to replace the cord as it always had a bend right at the mouse connection itself. Even though I really tried to keep the cord straight and preventing it from bending. There is nothing in front for it to bend but it still does. Then I start again to have cord issues. It was my 5th time replacing the cord for the mouse, so I had enough. I then purchased the MX-Master 3S in White. And the features alone seriously put a grin on my face. It came with a 40% charge on the battery already, I plugged it in and works perfectly. It matches my white mechanical keyboard. I am in love with it. I recommend 100%. I love how silent the buttons are. It's perfect for me, though I had to slow down the point. It was super fast. I am using the USB dongle. works wonders. No problems at all so far. this mouse works flawlessly with them.

[@txwt5109]

The first one I bought was for Mac. Had issues with it being non-responsive, lag, just didn't work very well. Purchased the standard windows model and it functions flawlessly. I tried using the bolt connection, bolt was not more than 12" from the mouse, experienced issues, non-responsive, severe lag, mouse movement would actually chatter moving across the screen. Absolutely usable. Went back to blue tooth, problem solved, functioning flawlessly again.

[@utkuozcan]

I have problems both usb and bluetooth. I read a lot about usb, so I will skip that for now but bluetooth also has tiny bit lag. It doesn't feel smooth. Is yours smooth as trackpad or another mouse you have.

[@LizzDimaano]

I love how the mouse is much quieter! I wish the MX master 3 worked for me, but I’m loving the Logitech Lift. Great review again, Cole!

[@ColeCaccamise]

Thank you Lizz!

[@LouisLuzuka]

What is Logitech lift?! Oooo

[@LizzDimaano]

@@LouisLuzuka it’s Logitech’s new ergonomic mouse for small to medium sized hands. I love it!

[@KuyaMagik]

Love your review! I Love my 3S! The battery is insane, and the look and feel of using it is amazing! Those clicks finally gone, the wife can sleep in peace now!

[@dalestiles759]

I've noticed that when I'm done scrolling... the screen sort of jumps up and down a time or two until the wheel settles into place. It didn't do this out of the box but while editing a 60 page Word Document I started scrolling more aggressively through the document and now I have this odd jumping problem. I wasn't being "rough" with the wheel, just scrolling it so it would travel that 1000 lines in a second.

[@Raitar100]

happens all the time to me when playing EU4. Im scrolling through something, then as soon as i close out of the screen the map zooms out to max. Very annoying. The Darkfield version was better and cheaper

[@randychan583]

I've just purchased my mx master 3s and I'm having this problem as well. It's like a freespin of logitech g502. That when you scroll down it would scroll a bit up and down slower than what you'd scroll. It's like the scroll wheel of the mouse of early 2000's is much better than this new "state of the art" mouses that costs a fortune.

[@Spahiuvalmond]

Perfect review. Got mine today.

[@512Squared]

One of the best (what you have thought about and how you've sorted your observations) reviews for this mouse I've seen.

[@ColeCaccamise]

Thank you man!

[@Simulacra001]

I originally got the Logitech G502X but the side buttons were in the way, I didn’t use the DPI switch and honestly it was too light. Final straw was a high pitched hum/tone from my speakers when moving the cursor while at 1000Hz. It wasn’t as bad at 500Hz but still very noticeable meaning I was running it at 125Hz most if not all of the time. Needless to say I sent it back and have purchased the MX Master 3S (which I got cheaper than the MX Master 3 and only slightly more expensive that the G502X.

[@anujagrawal9131]

Just got the mouse delivered today. I like the customisation options in the Logi options+ and as you said the buttons are quite mushy and silent so this might be a turn off for many people who prefer more tactile feedback.

[@NostalgicMem0ries]

most preffer silent and mushy, only gamers with their rgb builds live everything clicky, normal people likes silence.

[@zaylek6568]

Been struggling with the apple magic mouse with my m1 mac for about 3.5 years now.. Needless to say I've had enough! I can't play games as my mouse always things I'm clicking or scrolling when I'm not and it's such a pain! I've had my eye on this mouse for ages and can't wait to get my hands on one, you've 100% convinced me

[@Horoprime]

I like how you tried to put a dongle into the mouse and disappointingly failed

[@Randomlyme]

as a user...I have to say this is perfection

[@txwt5109]

Update to my last comment, I'm using the windows version with my Mac and the Logitech bolt connector. It functions flawlessly. Very happy with this new MX Master 3S In fact I like it better than my Apple track pads because of the programable features and overall ergonomics.

[@ColeCaccamise]

Glad you like it! I actually find pairing this with the Magic Trackpad is perfect for editing

[@FdezTW]

Great video dude 🔥 Going to try and see if I can somehow find it in store since I'm on holiday

[@ColeCaccamise]

Thank you brother! If there’s a Best Buy near you they may have it. I ordered mine from there

[@iSpike]

✨F✨A✨N✨T✨A✨S✨T✨I✨C✨. I own the MX 2, MX 3, Today I upgraded & just purchased this MX 3s really looking forward to receiving it. 🙌🏻

[@GarettFinney]

best review ever and I have seen dozens.

[@ColeCaccamise]

Appreciate that bro!

[@LouisLuzuka]

Got this for my birthday yesterday ❤ still getting used to the weight and the non clicks ness but I’m so grateful I love this thing 😊 I think I want to download the software to dial in some settings, how do you get there? *subbed* much love from Vancouver Canada 🇨🇦

[@ColeCaccamise]

Happy belated birthday man! Go to this link and you can download logi options + www.logitech.com/software/logi-options-plus.html

[@LouisLuzuka]

@@ColeCaccamise thank you so much!! I'm slowly getting used to the click its hard to go from a track pad that clicks to no click its confusing to my brain but I love it. and the weight I'm getting used to it. appreciate the link!! man I was so lost it doesn't really mention it in the box. I think I agree with you for gaming, do you have a different mouse recommendation? and for editing I think this might be the one

[@ColeCaccamise]

@@LouisLuzuka no problem! I agree with you there tbh. But as far as options for gaming, I think it depends on a ton of factors. If you want a lightweight ergo nice the glorious model d wireless is a solid option for $80. I’m also testing razers new death adder v3 pro which has the perfect shape for me but at $150 it’s a hard sell

[@LouisLuzuka]

@@ColeCaccamise okay so I’ve been getting used to it, but is it just me or the scroll wheel on the side has a frame of plastic it’s like you have to hold it really specifically to get that scroll on the timeline. The clicks don’t bother me as much as it does but I just have to be more gentle, and changing the pointer scroll speed has helped a lot although it kinda lags if I go to anything really fast on my 5k imac, but leaving it pretty low but not too slow is perfect for now. And I will check out those gaming options ! I don’t think I would travel with this mouse but it does look beautiful on my desk thank you so much!

[@stevennisenson3587]

Nice video! What wallpaper is that on your PC is there a copy of it anywhere ?

[@TielerFriedline]

Wait that’s a button by the thumb!!! Jesus I’ve been using the mx3 so wrong

[@ColeCaccamise]

Bro are you serious

[@TielerFriedline]

@@ColeCaccamise I don’t want to talk about it

[@InSaNeZiX]

Did you notice any staining on the white model after months of use ? And are there any other issues with the 3s ?

[@ColeCaccamise]

No staining or other issues

[@InSaNeZiX]

@@ColeCaccamise thnx for the reply

[@psi.hericaribeiro]

Tks 4 u video. Has the Pale Gray color discolored or has yellow marks after this time of use?

[@ColeCaccamise]

No discoloring. My old Mx 2s had a little discoloring on the mouse buttons but nowhere else

[@unknownhours]

Ugh, rubber. Rubber _will_ break down eventually. I wish they would get rid of it and go with hard plastic.

[@artyboy1377]

The hump is a little high for my hand but ill get use to it. I actually have very low expectations because im getting it primarily for web browsing and work. I use the G502 Lightspeed for gaming. What matters is a wireless mouse with long battery life and comfy countours + multi featured buttons.

[@ColeCaccamise]

Battery life + comfort is perfect. Recently I've had a lot of wireless lag that I hope you won't run into.

[@teppoman9702]

125hz polling is deal breaker....

[@Enthusiast_Impressions]

What was the DPI you were using for the MX master 3? My DPI is normally at 3950 so extremely high DPI wondering if you've tested this.

[@ColeCaccamise]

I hover around 650 or so. It’s what I use for gaming so I want it to match

[@LouisLuzuka]

@@ColeCaccamise oh dang you are at 650 that’s really precise I’m around 1300 and it’s a touch too fast but I’m getting used to it

[@alexv8203]

Have you tried the logitech vertical mouse?

[@ColeCaccamise]

I’ve not. Wouldn’t mind giving it a shot tho!

[@MrEternalFool]

Can it work without the reciever?

[@joela1492]

yes

[@mykeviper]

what it the palm rest thing your using? while using your mouse

[@ColeCaccamise]

It’s the DeltaHub Carpio, helps to raise your wrist to prevent pain

[@HDBnB1]

what white speakers are those?

[@ColeCaccamise]

audioengine a2+

[@barlevix]

Did it get discolored?

[@ColeCaccamise]

Not yet. My 2s got a little discolored on the mouse buttons after a couple years

[@ZaidanMhmood]

The Driver software (Options +) Makes it one of the worst though. Constant issues with application profiles, I have to disconnect it and re-connect it every now and then because shortcuts stop working for apps. It has many issues.

[@VonHor]

Do you think this is a decent mouse for productivity only despite its poor polling rate? I find it a bit concerning because I have a 200hz monitor

[@ColeCaccamise]

its great in every other way. the mouse has gotten really laggy for me recently that its hard to really recommend.

[@utkuozcan]

I just got my mx master 3s yesterday and it is not smooth as trackpad or my cheap generic wireless mouse. I can't say it is laggy but it has tiny stutter. Do you also experience this? I tried windows, mac, usb, bluetooth(all combinations) but result was always the same.

[@ColeCaccamise]

What mouse were you using prior? It might be the polling rate that’s making it feel less responsive. I know from using 1000hz gaming mice going to this at 125hz is a huge difference

[@utkuozcan]

@@ColeCaccamise I tried all dpi options, didn't work. I showed my screen recording to logitech support and they decided that the mouse is defective. I replaced the mouse on amazon and second one also has the issue. I think there is a defective batch. I will return the second one also. Here is my screen recording if you want to see how little and annoying the stuttering. kzbin.info/www/bejne/n5WxeqmAosp1d68

[@ColeCaccamise]

I’m not referring to the DPI, polling rate is how many times a second the mouse is checking if you’ve moved it. This is it something you can change in login options But watching your video that definitely is laggier than it is even with the 125hz polling rate. That’s super annoying that this is still happening on your 2nd one

[@mehmetozeren4816]

Can it butterfly click or drag?

[@drathaarvedder7584]

you dont want this for gaming trust me

[@Boomtyphoon]

@@drathaarvedder7584 How come? Was considering grabbing this mouse to bring on the fly and for use at home to avoid cables.

[@drathaarvedder7584]

@@Boomtyphoon then buy the superlight or the razer viper pro trust

[@ColeCaccamise]

You might want to look at the g502 or something similar if you’re looking to game and want a similar shape

[@chupasyups7914]

hi! i’m kind of torn between 2S and 3S… I mainly use a mouse for CAD and 3D modeling as well as FPS gaming daily. I’m curious to know which thumb controls are better (if the change in the 3S is actually worth it); and would the less tactile 3S affect responses while gaming? (I tend to spam the clicks a lot) love your videos by the way! i get to see things from a creator’s and gamer’s point of view!

[@ColeCaccamise]

To an extent I kind of preferred the thumb button on the 2s. It was much more pronounced whereas on the 3s it’s kind of mushy. I’d highly advise using the mouse against gaming because of the low polling rate. You might not notice the lagginess as much if you’re on a 60hz panel but even then it’s pretty sluggish. Though if I had to pick between the two for gaming I think the more tactile feel of the 2s ones are better. But I appreciate it!

[@YeiCop]

But this one is 1ms synchronization

[@mdraghibahsan]

It is causing pain in my forearm and thumb; especially thumb pain while using gesture control;

[@ColeCaccamise]

never had any of these issues. Sorry to hear you're having them!

[@matthewroutt2825]

Wouldn’t say it’s perfection then.

[@LuisLopez-ns6yg]

So you have the weird line on the left as well ... ok

[@bynishant9616]

Hey cole, how is your experience with the staining issues on the white/pale grey as seen with most pale grey ones on yt and reddit? pls reply fast need to decide fast, white works better with my set-up better but staining issues?

[@ColeCaccamise]

apologies for the late reply, I have yet to have any staining issues. With my older mx master 2s the mouse buttons did have a little bit of staining just from using it so much though, and that was the black version

[@christofferaasted]

This mouse does not work properly in "ratchet mode" with scrolling in steps, if you scroll repeatedly it will stop at your second or third drag on the scroll-wheel. Its the same issue as the previous gens.. FAIL logitech.. major FAIL.

[@writegoodcode]

I use vim btw

[@stefan.bar88]

Except the lag made me return it... unacceptable for this price

[@ColeCaccamise]

Were you using it over Bluetooth?

[@trekabra]

Worst mouse ever, has perhaps the worst build with terrible switches inside which are rated for 5 million clicks with higher than usual failure rate, warranty is terrible and is region dependent so be careful were you buy this junk, for a premium product from a Swiss manufacturer this is one for the ages, and should have repair facilities and have excellent technical support, and most videos online are probably sponsored so buy at your own risk

[@mjfan2337]

W cannon

[@Raitar100]

Its anywhere tracking is problematic compared to its predecessor. Disappointing for 140$ CA

[@karankular2408]

Don’t buy Mx Master 3s. Left click stop working after 1 year. They can’t even repair it. Its just piece of brick now.

[@CannibalCorpseLover]

first❤

[@ColeCaccamise]

Goatttt

[@S7Vmv]

special needs mouse

[@officialvisaural]

This mouse has a glaring issue with scrolling. Buyer beware.

[@YeiCop]

It was with the 3 not with the 3S

[@officialvisaural]

@@YeiCop I have a 3S with the inconsistent scrolling issue.

[@ColeCaccamise]

wdym by inconsistent scrolling?