Logitech Z5500 Power From 2 Amplifiers To ONE POD Control

[@jfgaming7144]

hi @Elektro Gamer do u know what Rectifier diode ur using i know its an BYW98 but there are many diffrent specs like volt and amperes V/A thanks already

[@ElektroGamer30]

Hello, I don't know exactly which model I used.. 1N4007 You don't need a power diode because POD Control doesn't have such a high consumption! If you still need help, you can always leave a comm.

[@towarlock]

nice i have 2 Z5500 already it's a little project for future, it is still stable for you?

[@ElektroGamer30]

Hi, yes everything is working perfectly so far! Absolutely all the changes I made to these systems work, perfect sound, no problems, no defects, and I even use it very often, at almost maximum volume:) Look here at all the changes I made to this Z5500 system! kzbin.info/www/bejne/qovPd5l6lL17gdU

[@dj4209211]

Hey great work. Your videos on z5500 fixes have been very helpful. I needed your help with something. My control pod connector got damaged and now mynsystem is collecting dust. The control pod works fine so is it possible to replace the connector with a d sub 15 pin. Any help would be appreciated.

[@ElektroGamer30]

Hello, and thank you! I'm glad I could help you through the videos I created! If you mean the VGA connector that makes the connection between the POD Control and the subwoofer, Yes, it can be replaced easily! I leave you PIN OUT here! 1 - Brown 2 - Grey 3 - Red 4 - Green 5 - Yellow 6 - Orange 7 - Blue 8 - White 9 - Violet 10 - Red with White 11 - Green with White 12 - Black 13 - Blue with White 14 - Brown with White 15 - Black with White

[@stefaniacristian8504]

Cool 👍🏼

[@ElektroGamer30]

Thx!

[@GamblingMarket-im8ni]

Logitech z623 vga cable male to female proper connection bro please 🙏

[@ElektroGamer30]

Hi, I don't have such a system to measure pins from the VGA socket! All I can say is: Pin 5 and Pin 15 for power on! (Add a switch) and pin 6+ and Pin 10- (Connect to a mono or RCA jack)