I BOUGHT THE CHEAP STUFF NOW I'M PAYING THE PRICE

[@LonestarHawaiian]

Head over to drinklmnt.com/Lonestar and get a free sample pack with any purchase. Thanks to LMNT for sponsoring this video!

[@2exiw]

If your going that far for sealing your building get blue max and paint the bottom 3 foot all the way around your building i it’s a liquid rubber sealer that keeps water out. But works great to keep bugs away from wood.

[@LonestarHawaiian]

I'll take a look at the Blue Max! Thanks!

[@greendog9013]

uv does a number on that tape and barriers, that's why it's best to put siding on asap to protect them.

[@LonestarHawaiian]

Learning the lessons the hard way!

[@megadesertdiesel1468]

Putting good over bad tape? You are sticking good tape over flakey old tape and hoping it doesn’t fall off. Me thinks that ain’t no good.

[@jayburris6252]

New tape is wider.

[@HerbaceousM8]

@@jayburris6252 wider but also that means more than half is stuck to nothing but falling off tape

[@wolfpack4128]

​@HerbaceousM8 assuming he gets the brick on anytime soon it won't matter.

[@dougdiplacido2406]

The ZIP system tape is wider than the original tape so it will tick.

[@benjaminreinhardt259]

Saw him do that and immediately scrolled down to look for this comment. Amusing it was the second comment. I'm not builder, but I think that is not ideal.

[@Wedge_Ie]

Call ACME brick in Fort Worth, if your house was built using their brick, they’ll have you in the system. They can look it up by address and tell you if they have it in stock or the closest one to match.

[@hotrodtex2124]

I believe they also have a store in Carrollton, I can't remember where I had to go buy some from.

[@LonestarHawaiian]

Thank you!

[@kevindavis8607]

If you’re there during the inspection and they are decent inspectors, usually if you can show them you have the stuff or it’s a simple fix/why it’s not done they will pass you. Again not always, and the inspector has to be a decent person.

[@MSeroga]

For sure! They will confirm you know how to fix them and usually pass you! When nobody is there to welcome the inspector and see all the issues, they get the feeling that you don’t care enough to make time for them and they’ll be much more strict.

[@Andrew-fr3bp]

Dupont Tyvek's flashing tape (Straight Flash and FlexWrap) is also very good and lasts a long time being exposed to sun and elements. It's a thick butyl with a pressure sensitive adhesive and it's compatible with 3M's "High-Strength 90" aerosol spray adhesive. I used the 3M 90 with their tapes and they were still adhering even after 6 months of exposure in South Texas elements w/ zero issues. Asphalt tapes are trash and belong in the 90's and 2000's. The Zip Systems tape is a high performance presure sensitive acrylic that should work perfect in your application. Glad you caught that issue now and not in 5-10 years when then sheathing is starting to rot !!! Good luck on the masonry phase of the built ! Are you doing soffit lights around the shop? You probably already mentioned in in previous videos but I cant recall. Asking because we put soffit lights around our house on a dimmable smart switch and the results were well worth the investment.

[@markdavidson7510]

thanks for the info....great to hear about the tyvek product.

[@Antmanlv]

Dont worry about the haters bro, you getting in there and getting shyt done. Salute to you bro!

[@risanch]

Ahhhh!! Nothing like doing the same job twice. Gotta love it.

[@jensvincent4702]

It’s not the products fault. You need siding and stone work months ago.

[@toddsecki]

Thats too bad about the upcoming city in your back yard. Im not saying you should move, but its always a good idea to look at your options. In regards to your table saw, treat it like its a loaded firearm! Fingers are not easily replaced. One of the most dangerous tools out there. Love the channel, I have a 2021 Custom Trail Boss (black) but no shop or garage. Thanks for sharing the mods

[@propylaeen]

I'm not into cars, but this guy got so much positive attitude love just the energy of this channel.

[@ronlovell5374]

That forcefield tape you used is basically just like a Tuck tape equivalent, which were really designed for housewraps, very thin, and definitely breakdown with exposer. Butyl/flashing tapes are far superior for strecthiness, adhesives and longevity.

[@JohnDoe-zr6bk]

What is "Tuck Tape"? I think you meant "Duct Tape" which has a fabric back. Completely different product.

[@ronlovell5374]

@JohnDoe-zr6bk It's sheating tape, TUCK is the brand, other companies have called it Tech tape. It's used mainly for tyvek, poly, vapour barriers,etc. Found in any Home depot, Lowes and pretty much every build center/hardware store. Used to be manufactured only red, now red, blue and white are available. It's basically packaging tape with adhesive on steriods. It sticks to anything even in cold temps if the surface is dry and clean but is horrible to remove from surfaces with any temporary use or after exposure.

[@steveoh9838]

Glad your staying. Nowadays no matter where you move, development will follow. Wise decision👍👍

[@MichaelCurley-il6sm]

Not particularly true. We are on 5 acres in Bend Oregon and the only building they can do is single family house. We paid 650k for our 2500qft house, 5 acres, private well, and 40x60 insulated metal shop that’s completely finished inside. His house has to be worth 700-900k he could sell it and get something way more private. But being near good schools and jobs has value too. I feel bad for him as he has an amazing view now. Situation sucks.

[@BR549_o7]

buying land next to state game lands is a better guarantee than farmland is these days.

[@wolfpack4128]

​@@BR549_o7except it invites trespassing. I have a buddy with land that borders State Game Lands. Every year there are folks sneaking around on his cameras.

[@bryanprehoda]

Never said he was staying just said he was going to finish the shop

[@robertkerby2581]

It was recommended, and I subsequently used that tape on the two windows that my father and I installed in my one car garage. It's always a learning curve when DIY'ing and I continue to learn on a daily basis, which I consider to be a good thing. I cannot wait to see start laying the brick on your ginormous garage building! Keep the faith, my friend!

[@Grantski2007]

There’s no way the spec on that product says it’s ok to leave uncovered for. 6 months. I’m sure the product could’ve been ok over zip system for this application if exterior finishes were done correctly

[@peterkohler7259]

Prosoco’s products are just as good as zip fast flash for like $30 a tube instead of $50. Won’t see those at Lowe’s or Home Depot though I don’t think.

[@benfowler2127]

If I remember correctly, prosoco developed Huber’s liquid flash, so you’d be using very similar products.

[@txcombatmedic]

Go to Home Depot and have them order it from ACME Brick. That is where DR Horton gets their brick so you should be able to get a match if they still make that style/color.

[@Building-IT]

I love the Zip tape! I did my barndo in zip system and tape. It handled the weather very well! Sticks like crazy too! The liquid flashing is amazing too!

[@garrett9186]

The entire forcefield system have an exposure limit of 180 days. And given the hot summer ultra violet rays that explains the failure.

[@DeMay42]

I started watching because of the trucks and ZL1, now I watch for Maui lol. His ears are getting so big. I got two black labs and they are the best dogs

[@Roaring.On.Carnivore.]

Welcome to the build show 🤝

[@celuldor]

So putting a new good tape over the old half broken, that will not give you a good ground for it to stick 😕

[@vanbigwhiteshed]

Great video, that piece of metal is called angle iron. If you keep using the wrong terminology someone may call a violation on your Man card.

[@gregkrueger331]

LINtel, LINtel, LINtel! What the heck is a lantel? 😂

[@exportedafrican]

GP’s product Isn’t the issue.. the fact you haven’t done the facade in 90 days of putting it up is! Get that stone up!

[@TheStevedie]

He knows that.

[@scottrussell9999]

Man love the channel just order some LNMT for me and my kid. A lot of 2019 Silverado upgrades are due to the work you have done to your trial boss! Love the channel and the work you do! Hope all continues to go well with the shop!

[@LonestarHawaiian]

Much appreciated!

[@malikto1]

Zip tape is engineered to work with Zip sheathing. It will not perform as well with the GP product. Best get it sided soon.

[@michaelpicozzi3910]

Building looks great can't wait to see the projects you come up with in there

[@TheUnreallimits]

I enjoy coming here to see what shouldn't be done followed by fixing what shouldn't have been done by doing it wrong again and saying its fixed. Granted, this is just an unattached garage. Perfection is not needed. I still would have removed the old tape to make sure of proper adhesion of the new tape. You don't want to remove the brick in 10 years because the flashing failed. It very well could last a lifetime. I would just prefer to know that it was done right.

[@billvojtech5686]

I can't believe you covered the failing tape with the zip tape. You should have removed the old tape and maybe even cleaned the area of dried adhesive residue before applying new tape.

[@2exiw]

The first tape looks like tape for wrap. For fiber glass wind/ Tyvek. The 2nd tape looks like flashing tape. For windows. So basically 1 has rubber and 1 has film. I know my message is pointless do to the fact you know you should of coved it up. 😊

[@imthdj2u]

Should have used the Yellow tape from GP i did my 40x40x13 shop and they say to use yellow on roof and grey on walls i used yellow everywhere and has held great...the grey is to thin and sucks

[@leenonolee4629]

Unless the new tape touches the board when the old weak tape peels lose it will take the tap on top of it too.

[@Laterdays2]

It’s not a fail. It’s a chance to learn. You’re doing an amazing job.

[@mattlane2282]

it's a fail he put the zip tape over the failing tape...

[@KirkIngram-r5d]

Welcome to my world, i was a GC for 35 years, i know what you are going through..

[@philly7558]

You are killing it. It really is looking great... outstanding job 👏 👌

[@greengiant_6652]

WWMRDOTBS is how I do pretty much any renovation.

[@chrisplacencia4754]

Should’ve used the yellow tape instead of the grey, it’s only good if your gonna cover right away

[@geecant]

I’m brand new to the channel. I subscribe to over 600 channels. If I find the channel to be informative, helpful to the the things that interest me, and entertaining, I subscribe. Channels that are well edited are always a plus. Your edits and content are great. If a KZbin channel can resist the temptation of clickbait, I’ll likely stay subscribed. It amazes me how many channels have very good content, yet still used clickbait. I still occasionally watch them, but I unsubscribe. Keep up the good work.

[@dfnc03]

"A man that has never made a mistake, has never made anything"

[@sentienthamster]

That they let you cover the edge nailing with tape in a high wind load area is so odd. We require roof and sheathing nailing inspections, especially on shear panels, before covering.

[@johnnelson8956]

You put Zip tape over an existing tape that has been broken down by UV rays and is delaminating from the substrate. Brilliant idea. The tape works well because the entire width is attached and pressure applied. You applied it over tape that is failing and as such, only the outside edges are actually bonded. How do plan to address the hundreds of leaks that you WILL have after you brick the building up? And your sheathing only has the weather proofing on the face. Not the edges. Once that tape job fails, water will permeate into the sheathing and start to rot.

[@ZAPATTUBE]

The Zip tape won't leak, there will NOT be holes in sheathing.

[@freddowns9708]

Pretty sure he took the old tape off

[@criticalevent]

He didn't really need any tape at all, all this is going to be covered.

[@cliffordlatko1901]

Because none of that stuff is meant to be out in the weather, it is all meant to be behind other stuff as a second reinforcement of not letting moisture in. Your brick work is the first that takes all the abuse from nature and water.

[@chrish883]

Those new homes will probably be going for lot of money and that should jack up value of your home. Then you can sell.

[@EzequielAmbriz]

Check out Aubrey brick and clay stone co in Aubrey down the road! I live in prosper and they’re my go to, tell em what and how much you need and they’ll give you a price on the spot👍🏽

[@TheWhale45]

I Keep seeing you guys not roofing a project out or doing the siding. and I keep saying hey this is gonna get ugly. But what do I KNow. Water is not your friend. Good Luck.

[@pedrosmith1525]

I'm a builder in DFW it's hard to beat ACME for selections and quantities

[@BR549_o7]

Prob to late for this, but show us a video of you kicking in that side door before you replace it. Agreed, you need a better secure door on that side, because with 4K homes being built, the crime will increase.

[@ZAPATTUBE]

Bro, you are doing a Good job.

[@MrCamkay]

Burnouts in your garage?! Heresy! The garage is a sacred place, Burnouts are for the streets!

[@langsbr]

If the original tape was disintegrating and not adhering, will you have an issue in the future with the zip tape being applied on top of it? I figured you'd remove all the existing tape.

[@danielmckellar397]

Finally another shop video

[@ehhehh4049]

Did he run out of money or time? Feels like the project has stagnated.

[@BR549_o7]

@@ehhehh4049 neither. It is the Govt. red tape he needs to wait on. You can only go so far until they need to inspect. And they are in nooo hurry to come out to do such.

[@ehhehh4049]

@@BR549_o7 That sucks. I had to wait months for a honestly BS permit to be done by our city. They certainly are slow.

[@susanharms3209]

Start calling brick companies. Start with ACME. Give them your address and with your address they’ll be able to tell you if the brick was bought through them. Their records go back about 25 years. They then may have it in stock or you can order it.

[@ErtsenPlayGames]

16:15 - Maui 16:30 eating THE ROCK coincidence ? 😂

[@seanatkins1971]

It’s not the tape it’s because you are taking to long to put the siding on

[@ancientcityaquatics9428]

it’s something he said several times in the video lol

[@BR549_o7]

he cant help the inspections take so long to get completed.

[@Pwn3dbyth3n00b]

If the tape is flaking off why would you place new tape right over it. Thar flex tape has some very weak adhesion to the actual building now.

[@metal_mo]

You hung it at least 7 months ago and left it exposed to the elements. Zip tape will fail too if left exposed as long as that. User error, not product failure.

[@maharlikaheir]

Aloha love watching your content also based in Texas. Keep up the great content! 🤙🏼🤙🏼🤙🏼

[@donelings8505]

I'd send a photo of the brick on the house to Acme Brick. They are one of the largest brick suppliers in Texas.

[@BR549_o7]

Wile E Coyote used Acme all the time to catch the roadrunner.

[@davidribeca1745]

If the tape is the correct tape and it hasn't been in the weather longer than the directions, say call the manufacturer and a Get the GP rep out to the job to make it right! If you are following there directions than clearly there is a defects in the tape . The manufacturer rep would probably give you the correct tape if theon you receive from lowes was the incorrect item!

[@davidribeca1745]

Pur sheet metal flashing over the garage door trim,windows and doors headers!

[@davidribeca1745]

Your sheathing techniquely is not structural the steel fram is! So over driven nails in OSB sheathing are not going to change anything.

[@davidribeca1745]

How do you know the brick ties will work with brick coarse

[@davidribeca1745]

Shim the front of the hinges jamb to the right to close that gap. You can experiment with a flat bar and watch the gap close.

[@christopher-ricks]

I would also recommend "W.W.K.f.R.R.B.D" aka "What Would Kyle from R.R. Builders do". I would also recommend taking a look at his channel. Awesome builder of post frames.

[@ErtsenPlayGames]

2:58 AHHHH YES --- it falls of on its own 3:04 -- then proceed to apply new tape on old one 😆🤣

[@ErtsenPlayGames]

PS (yes i know , its wider so no issues there) that cheap tape should last way longer if not exposed to uv ps2 -- there is also butyl tape with aluminium on top ( its thick ) that will last around 50y exposed to uv without issues

[@dtay0421]

Gotta have the garage lentil up for Celina inspections lol dm me if youve met Jason Fabbri, Oscar, TreyLandry, Jim, lol I know every inspector in that city

[@LonestarHawaiian]

Learning the hard way 😂 Round 2 coming up...

[@c-heffernancaptainneckfat9073]

His name is Chad? Huh I never knew that. Does look like a Chad.

[@LonestarHawaiian]

😂 the #1 reaction when I meet people in public...

[@bobbray9666]

Zip tape was designed to adhere to Zip sheathing. I've used it and trying to remove it after it's rolled is very difficult. Good luck. Maybe put Tyvek over all before siding?

[@scottkriegerjr.6205]

I'm just confused why you don't just cover it up instead of retape and caulk the overdriven screws /nails. Wouldn't that be easier and save time?

[@Natedoc808]

Lesson learned: never enough time or money to do it right, but plenty of both to do it twice

[@Ogilla]

This is the perfect example of suburban hell lol

[@pbenga]

It stop leaking transmission fluid.........because it's empty now. LOL

[@wynnrider536]

if you dont clean all the stick surfaces wont the old tape and its adhesives cause the new tape to fail too

[@allabtMando]

Need a shadowbox to display the gloves in the shop after the build

[@BrandonBoston-lo4uc]

I bought a steel welded security door because its more secure. *has full glass front door.

[@hebdschnure]

Installing a security door in a plywood shed lol

[@BR549_o7]

true, but it will be brick / stone on outside. It is not like most vinyl siding homes where it is easier to break thru a wall than it is the door.

[@PrograError]

@@BR549_o7 well... it's a little low security now that he said there's gonna be developments beside him... plus he's on YT...

[@doublemc2633]

Product is failing because of UV, not bcuz of the weather (i dont see water damage). ZIP will also fail after 1 year from UV.

[@radwimp7484]

well done. no worries about not passing your inspection, it's always the small stuff you forget the first few times.

[@BR549_o7]

plus it is good to always leave them something easy to spot. Because once they find something, they are happy and will not look so hard afterwards. This is proven.

[@dromans615]

I would’ve went with the wider tape the 6 inch to completely encapsulate the old shit

[@criticalevent]

I think you'd be more upset if you had paid for zipsystem and it looked exactly the same after half a year in the sun. Another thing it doesn't like is ozone. I had a half roll above the fan motor on my furnace in the garage and it completely disintegrated after about a year on the shelf.

[@ElectricBlueIX]

I’m sorry but Huber is the best sheathing out there hands down. I’ve been in construction most of my life and nobody makes a better wall sheathing, roof sheathing, or subfloor that comes close to their products. Sorry you had to find out the hard way with the Forcefield product. Their tape is a joke. Not to mention, the Forcefield sheathing is not a painted protective layer built into the product. It’s literally like foil paper glued onto the sheathing. So it rips and tear if you look at it the wrong way. The ZIP system from Huber is a sealed layer built into the sheathing that won’t peal off…ever. And the ZIP tape, while expensive, when installed and rolled properly will stay on there forever without being covered up.

[@94rperez]

Alliance Materials for the stone, mix and lintels.

[@reg11756]

As a new owner builder about to break ground on our retirement home, I have learned a lot and enjoyed your videos, HOWEVER... even after learning the hard way, you follow one big mistake with another one based on the cost (caulk vs Zip liquid flash). I bet you don't spare a dime when it comes to the money you spend on the $300-$400,000 worth of vehicles and toys in your garage. Why treat the investment in the garage any differently? It costs as much or more than any one of those. You even got a big lesson in quality control and shoddy workmanship when the brick facade of your production house came tumbling down, but you still look the "bubble gum" fix approach on your garage. The exterior door should have been an inswing. The inset and door stop trim would protect the mechanism and sealed better from the elements. Now I can learn from this and avoid the same hell.

[@Andrewdhutchinson]

Matt knows best.

[@izziedeleon1561]

Putting a security door on one side when you have a glass door on the other side is funny

[@MakeitZUPER]

I saw this coming, lol. Peel all that crap off and use paint rollers to apply a coating of bedliner. Easy fix to solve all your issues. I wouldn't even use that Zip stuff because it's going to shrink over time anyway and it is compromising the shear strength of the sheathing in its design. It's just another product that we will find out how bad an idea it was in a few years to a decade from now. All I see is a big marketing campaign for a product that has a short life span. Good luck to all the Zippers who have it on their homes. The third little pig made his house out of bricks for a reason, lol.

[@justintyme6920]

CHEEHOO! Love your dog is Maui! Home sweet home Braddah! 🤙🌴 Maui nō ka ʻoi

[@LonestarHawaiian]

🤙🏽🤙🏽

[@looncraz]

People who think Texas doesn't have any regulations should watch these videos. Also people who wonder why homes are so expensive.

[@locke3141]

FYI: it’s Lintel, not Lantel.

[@BR549_o7]

he is from Hawaii, cut him a break LOL

[@locke3141]

@ yeah that’s fair. He’s a DIYer and doing a pretty darned good job considering that. I don’t blame him for a second for this mispronunciation. There are thousands of terms related to construction, so I hope nobody was thinking I was doing anything but informing.

[@construction_brexb.75]

Just a little information about warranties for exterior wall systems. If you unfortunately ever have to deal with a failed exterior sheathing wall issue and you look to submit a warranty claim, you will not be able to receive the warranty claim acceptance. Manufacturers are very clear, for good reason, that you must utilize all the approved products in their system. Mixing materials from other manufacturers will void the warranty for the sheathing panel weather barrier. I work in the commercial construction industry and have used similar systems. To receive warranty certificates for these product installs there are certified inspectors for your area. They would come out and inspect the install and certify the installation is done correctly. Most local jurisdiction inspectors don’t know enough about this process and will generally approve how you installed already. Here’s hoping you don’t have to make a sheathing warranty claim. I’ve been in the industry for a long time and I would say the likelihood of you having an issue is small.

[@bigtmane8]

I know there was some OCA going on. Game recognized game.😂

[@UlwanX]

America building with a tape. Kinda like a joke around my region building with a tape and foam😂

[@alvarezz09]

that sucks wish the farmer didnt sell. I hate how they keep making all these massive developments which suck for everyone!

[@bobbygriffith1429]

For your first build and only had 1 failed inspection your doing great. BTW.. it’s pronounced “ Len- till”! 😅

[@LonestarHawaiian]

I love pronouncing things wrong and watching the comments explode 😂

[@masterfabricator]

Now it's the zit building 😂 lol

[@Jsailor1210]

Leaving that tape uncovered exposed to the elements for 6 months is what made it fail.

[@marcstruglia5910]

Inspectors are A-hols and have a power trip.

[@jordanreyes8880]

6 months? Our suppliers tell us not to leave zip on for more than 90 days.

[@johnnya.quevedo2552]

Mercedes should be the 1st actual build in garage

[@HonorablyShady]

Lin-til not Line-til

[@travman0870]

Acme brick in Denton. Give them your address and they will match it if it since it is a DR Horton house.

[@GNelson1989]

Should've just put the siding on before that could happen bud