Long range DJI Goggles2(stock) + Caddx Vista (cherry long) extremely low altitude

Long range DJI Goggles2(stock) + Caddx Vista (rush cherry long antenna) extremely low altitude
Get low to engage gps signal because of jamming.
setup:
frame: apex hd 5"
fc: holybro Kakute F7 HDV
esc: holybro tekko32 45A
motors: Xing 2208 1800kv
props: Gemfan Hurricane 51466-3 V2
video: caddx vista dji cam(wb fix, high quality 60fps 16:9) rush cherry long antenna
goggles: dji goggles 2.
betaflight 4.4.1 rpm,
gps: beitian-220,
autonomous buzzer: fullspeed lucky box
accum: 6S GNB 1250mah 120c,
app: Taranis X-lite pro (tbs crossfire built in)

[@user-lv2kd6od6d]

Thank you 😎

[@MatteoKrobs]

rip to the LiPo

[@polarfpv1860]

It's good, charged immediately.

[@remyKhuong]

May i ask you how to set up to get the LQ? Mine didnt work, just flashing 0:0 on osd, im using g2i, boxer, rx tbs nano, module tbs.

[@Lyphfpv]

Me too..

[@maddogfpv]

@@Lyphfpv make sure you have the pads soldered right, tx to rx and rx to tx from receiver to FC

[@i-dronep.r.692]

Is the cherry antenna lhcp or rhcp , need this for my system , by the way nice flight 👍

[@polarfpv1860]

LHCP of course... thanks

[@i-dronep.r.692]

@@polarfpv1860 thanks for the answer 👍

[@mrmoraes4082]

Hi, can you see in your video feed goggles 2 with caddx vista a stuttering effect? Thanks

[@polarfpv1860]

Hi, it was in 60fps mode on nebula pro camera. I use dji camera 120fps , and no stuttering in this mode

[@MrJT270567]

did you just do the ham file hack on goggles 2 sd card, or do we need the naco file on the vista as well?? i fly goggles2 with o3 and vista with liear antenna but the vista gets low mbits at 600m distance...🤔

[@polarfpv1860]

In case of goggles2 you need only ham.cfg

[@ehsankeshtgar6734]

Hi, how do you have osd recorded on the video. I think the only way would be to flash osd with wtfosd firmware! Is that right ?

[@polarfpv1860]

Hi, goggles2 do not need wtfos, osd recording is on the board

[@mikeltxi]

Hi! Did you install the wtfosd or just update the vista to have all the osd?

[@polarfpv1860]

Hi, this is goggles2 default osd

[@mikeltxi]

​@@polarfpv1860and you know if it's compatible con V2 goggles?

[@polarfpv1860]

@@mikeltxi no

[@mikeltxi]

@@polarfpv1860 okey thank you

[@lorddeen11]

How to hack Vista so it can connect long range with Google2

[@polarfpv1860]

Hi, you need to create text file ham.cfg , and put it in the goggles sd card

[@chewthis5805]

@@polarfpv1860i did this and didn't work. It just get lower and lower range in 20 and 10 mhz

[@alexeyivlev3716]

Валик Джан, привет) А сколько у него радиус полета? далеко улетел по моему)

[@polarfpv1860]

Привет. Ну тут конкретно 3.2км в один конец... А так все зависит от аккумулятора и пробития сигнала. Нужны тесты