Longer B1 Laser Custom Base

Detailed assembly of a custom base and layout grid.
33-36W Output Power & 6-core Laser Head
Highly concentrated laser beam, increase 20%+ cutting capability, cut 25mm basswood and 50mm acrylic by multiple passes
17.72 x 17.32" / 450 x 440 mm engraving area, especially ideal for A3 panels
Engraving speed up to 36,000mm/min, 32 bits chipset
Equipped with smart Air-Assist system automatically controlled by Lightburn
8 major safety protections and sturdy frame
Available in two models. 20 watt and 30 watt:
20 Watt: s.zbanx.com/r/h0hgV8c46ykB
30 Watt: s.zbanx.com/r/f5JZrNtSGkHn
Link to layout grid: moonshinecrafts.com/product/4...
Cloudray Goggles: amzn.to/3rv8QfF

[@captcraig777]

I think your base came out really good. Thank you for sharing this experience!

[@chrisciraldo4935]

Thank you roger for all you do for us and making this video for us to set up our laser

[@patfoos3791]

I'm a newbie and have learned lots from your videos. Thank you for sharing!

[@SheriKibbe5150]

Thank you for sharing your grid layout :) This is very helpful!!

[@bobbyrapp7723]

another great video, thank you

[@mrgrinch61]

nice video thanks

[@Ricks2Cents]

*Looks like your wearing Snow Mobile Googles. 😂*

[@buxtor]

Howdy Roger, and thanks for another fantastic video! I just ordered one of these and was curious as to the machine's actual dimensions. I know it boasts a larger cutting area, but seeing if it'll fit in my custom enclosure.

[@fairrider3346]

I TRYED TO BURN THIS ON THE BASE I SET MY LONGER RAY 5 10W BUT THE TWO SMALL SCREWS AT THE TOP OF THE LASER HEAD STOP THE LOWERING OF THE LASER HEAD ABOUT 5 ARE 6 MM SHY OF LETTING THE LASER HEAD LOWER TO THE 30MM ADJUSTMENT FOR THE LASER TO WORK.

[@rogersshop]

As I recall, there is a second set of screw holes where the head can be mounted lower.

[@Ricks2Cents]

*I made mine every 1”*

[@dannydang1376]

Hello you said the grid is on the website , I’ve been searching for that site and cannot find it. Could you provide it please? Thank you

[@rogersshop]

Link in the description: Link to layout grid: moonshinecrafts.com/product/4...

[@wethepeople4918]

one question... I was told use air assist only when cutting not engraving ??????

[@rogersshop]

Use when engraving, especially on wood or cork, will help keep the lens clean for a longer period between cleanings.

[@MakeitHappen1]

I just bought the Longer 40w. How do you pinpoint the laser head to an exact position. I don’t see any light until the laser starts engraving, so I’m just guessing it’s exact location. Maybe I just don’t know how to turn the light on (?)

[@rogersshop]

Assuming you are using Lightburn..............In settings, turn on "Enable Laser Fire Button" Then, from the move tab, set power to 1% for the laser fire button.

[@MakeitHappen1]

Yes, thank you!

[@user-bn3sd1gg6i]

I have a Longer 5 10W with 410 mm travel x & Y how do I change the grid program to smaller it keeps giving me an error message.

[@rogersshop]

In Lightburn, edit your laser setting to 400mm (or 15.75" if using SAE). This is done by editing the setup for your model.

[@user-bn3sd1gg6i]

I'm a newby this is my first laser it is set at 400mm but when it's going away from me it gives me an error what am i doing wrong ?@@rogersshop

[@chrisciraldo4935]

I have this exact laser any tips on test to run with lightburn

[@rogersshop]

kzbin.info/www/bejne/h3OnZ6WInrmUirs