5 min Steering Damper Change // Ford Super Duty

[@ojmcbaggins]

Your rusty truck makes me feel good about my rusty truck! Thanks again for the info!

[@rickbrown03]

I was thinking the same.

[@danielson2454]

99 problems but Rust ain't one.

[@nativeoutdoors1780]

I don't laugh at KZbin videos like at all, but the way you said, ooh ribbed for pleasure on her side, caught me absolutely off guard lmao

[@mitchbrockman4399]

Why use an impact gun on one bolt and not the other? Should the fasteners be torqued? Thanks.

[@endurancekennels]

Bad angle.

[@haydendavis2089]

I know you posted this video a while ago… what kind of pry bar is that to wedge between the bolt? I cant get that out to save my life.

[@endurancekennels]

It's a tie rod/ ball joint fork.

[@jaburnwo6184]

Pickle fork

[@JuanRodriguez-bn8xr]

Did you need an alignment after changing it?

[@endurancekennels]

I did not.

[@orockzman8757]

What year f350 is this?

[@endurancekennels]

Should be in the description 👌

[@cliffordduzz4342]

The beautiful bilstein looks out of place with all the rust but you made my decision on getting one myself on my not that rusted southern 2005 Ford f250 super duty truck

[@endurancekennels]

Everything is guaranteed to rust out where we live 😂

[@ricardocorsa9077]

Im doing the same thing in my 2012 f250, I can feel a the wobble not really bad, but i want to fix it before it gets worse ,would this really help? Thanks for showing how to get this done great video.

[@endurancekennels]

The wobble isn't from the steering damper. Could be ball joints and tie rod ends.

[@waynebarnes1369]

Looked like that bracket was broken. The very first bolt you took off.

[@endurancekennels]

Not broken

[@jameskulisek1550]

Can you post part number or link of damper?

[@ColtonBlumhagen]

I love how we go from hammer hammer hammer on the pickle fork to bam it's in. lol

[@endurancekennels]

That's how I roll 😎

[@mto_aerial]

Lol I can’t get mine out for nuthin’ which is why I’m here. I like how you roll! 😎

[@nknaakco3966]

@@mto_aerial Here for the same reason, was really hoping for some comment or tip on how to get that sucker out.... crazy frustrating

[@mto_aerial]

@@nknaakco3966I screwed the nut on just halfway so the puller wouldn’t slip off and used a gear puller and it came right out.

[@ojmcbaggins]

I broke that lower bolt my first time. I'd be interested in finding out what spec its supossed to be torqued down to

[@endurancekennels]

Ya I hear ya! Call the dealership service department they are always good with torque specs.

[@ojmcbaggins]

@@endurancekennels they are company specific torque specs. I found the bilstein is 67ft/lb Upper, 26ft/lb Lower. Rancho directions say 35ft/lb on both for their stabilizer. Strange.

[@Rob-tx3jl]

@@ojmcbaggins different companies different designs different materials, nothing weird about different torque specs.

[@theosinitsin3906]

@@ojmcbagginsthanks for posting the torque specs!!

[@darrylt1031]

you use your impact driver on the bolt with more difficult access, then don't use it on the easy access bolt....what gives?

[@endurancekennels]

Don't want to melt the nylock

[@troyingram8167]

I have a 2001 f250 super duty and it don't even a steering stabilizer on it

[@endurancekennels]

Dang!

[@ManuelPerez-oz3dn]

Mine didn’t either

[@westtexasdave2140]

Were you getting a death wobble before you changed it?

[@endurancekennels]

No

[@sxsextreme5444]

Like how it said 5 minutes and then jump the video to the new damper. Being installed five minutes my ass..

[@endurancekennels]

Some folks have skillz 👍

[@stlskin]

Ypu really thought he meant the install took 5 minutes? Lol damn, son. He meant the video is 5 minutes. Welcome to the internet.

[@michaelreis9141]

Washington the first time he used a ratchet?

[@Whyknot80]

Is this a Catrina flood rescue truck?

[@endurancekennels]

WI originally. Lotsa salt and rust there bud!

[@chrisharding2813]

3:44 what happened lol, never showed us how you actually got it out. Thats the only reason anyone watched this. Cant just edit it out =C

[@endurancekennels]

Pickle fork 👌

[@islanderson691]

I have a 2017 f450 and as far as I can tell when trying to buy one for my truck they don't make any so it stops at f350 due to the f450 having a wider front end making for tighter turns than the f250 and f350. If you know were I can get one that fits please let me know. Thanks

[@endurancekennels]

Interesting. Did you try Napa?

[@islanderson691]

@@endurancekennels yeah, Napa can't even get me locking lug nuts for my truck

[@endurancekennels]

Ah man that sucks. Have you tried calling a drive line specialty shop? We have one in the neighborhood I bring my truck there for all that stuff.

[@islanderson691]

@@endurancekennels I have but I'll check a Some specialty shops and see if they can get one.

[@Boeinguy]

WT? You skipped over the removal and right into the new one being there?

[@endurancekennels]

I'm sure you're smart enough to figure that part out 👍

[@kevinburroughs6583]

What size bilstein shock did you use for this replacement? How much better did it make the ride? Does it affect your towing?

[@nativeoutdoors1780]

He got the 5100 series and it's quite a bit beefier than stock which is really good, I'm about to do the same change on my truck and I'm interested to see if there is any change

[@hoosierLowe]

@@nativeoutdoors1780 so what was the outcome???? Looking to do the same with my factory shocks on my 2016 Superduty

[@nativeoutdoors1780]

@@hoosierLowe so I replaced all the shocks with Bilstein and the ride quality definitely improved, then I replaced the front dampener with a 5100 series and I didn't feel any difference which is good, I didn't want heavier steering from the beefier shock.

[@nativeoutdoors1780]

@@hoosierLowe oh and my truck is an 2008 so the same setup suspension wise and chassis wise as your 2016, so I would think you would enjoy the shocks, apart from looks which I really like, I also just liked the improved peace of mind and ride quality

[@h1ghy1eld25]

my truck has a ball joint attached to one side

[@BD5243]

What a cop out out cutting the video short to see how long it took for the fork to separate the shock.

[@endurancekennels]

Skills are free they don't cost time 😁

[@garykost9298]

Yeah maybe if the bolts are frozen on there it’s a quick job. But they don’t show ya when the shit gets hard.

[@endurancekennels]

If you bring the vehicle inside a heated garage the bolts will thaw out.

[@OltonBradly]

Do you use two of them or one I have 2011 f350 all stock

[@endurancekennels]

Just one on my truck I could see two if you do tons of off roading.

[@ALEXELY925]

What are the symptoms of needing to replace it? Good video.

[@endurancekennels]

When the old shock is blown that's when I replace them.

[@ricosplace1]

If you start getting “bump steer” then time to replace.

[@jjsemperfi]

@@ricosplace1 My brand new Bilstein Steering damper bump steers so…

[@ricosplace1]

@@jjsemperfi Sounds like you have some other front end problems. Time to check all your front bushings and ball joints.

[@SeaPro360]

Step 1, the day you place the order is to spray those bolts/nuts with PB blaster or 50/50 atf acetone mix.

[@endurancekennels]

Basic knowledge 👍

[@z0sickvett60]

What’s the part number on the shock? 5100?

[@endurancekennels]

I don't recall, sorry 😬

[@darrylm3627]

Good Stuff, Great Tips👍🏿😀

[@Silverxxx450]

Did you have wheels turned all the way to the left side?

[@endurancekennels]

No, straight

[@josepina4622]

did you replace it for any specific reason?

[@endurancekennels]

The old shock was toast seals puking out it's guts.

[@raymondsalinassanchez9639]

Did your truck shake alot before replacing?

[@endurancekennels]

No.

[@haydenpostma9790]

Is your truck on jackstands? Or you just doing it while its parked?

[@endurancekennels]

On the ground lots of clearance if you don't mind lying on your back.

[@josepina4622]

Do you think that the steering stabilizer could be causing sloppy in my 2015 4x4 F-250?

[@endurancekennels]

Probably not have you checked your ball joints and tie rods?

[@luthoriousOG]

Also the steering box itself

[@joeyquinney4032]

870-50 had me cracking up lol

[@zyre2503]

Whats the part number?

[@endurancekennels]

Dang good question it's not OEM bought it on Amazon.

[@robertbaldeo7313]

What year truck is this

[@endurancekennels]

2008

[@LemonySnicket-EUC]

But did it make a difference ?

[@endurancekennels]

Of course.

[@Theo8863]

Fluid film would stop all that rust.

[@endurancekennels]

It's Minnesota. We eat rust 👍

[@Boeinguy]

Wtf? You didn’t finish showing the removal?

[@rvadventures]

For the love of God put some paint on these trucks if you live in a salty state! Lol

[@m.7n6]

5 minute job my ass, I can't even get a two year old rough country steering stabilizer out of a two year old not so rusty drag link

[@endurancekennels]

I got skillz my friend. Skillz. 😎

[@nickgarza4124]

"It's ribbed for Pleasure" Get the duck out of here that's hilarious.

[@ThemGnarlyBoys]

5 minute? Not when you can’t get the old ball joint bolt out

[@endurancekennels]

Bummer

[@scottwhite2002]

Don’t tell us the torque specs or anything

[@endurancekennels]

Tight 👍

[@SilverbackSasquatch19xx]

Way to skip prying the second side out

[@endurancekennels]

Kyler did your parents give you that name?

[@SilverbackSasquatch19xx]

@@endurancekennels Unsure of how your question pertains to your video but the answer is yes.

[@luthoriousOG]

Soooo many weird questions.

[@rolandogarcia3597]

Sure take of the damper and f... the rest of the bushings lol

[@endurancekennels]

😬