√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto √ Do it Yourself √ Save Money
@GrowthGuided13 күн бұрын
Thanks so much friend (: great help
@CrisCord-vv4bp2 ай бұрын
Thank you!! Now I jst need a lift 😅
@20BKing2 ай бұрын
If John malkovich were a mechanic...
@AndrewBreece2 ай бұрын
I got that all fixed but I’m still having the that driving sensation. What’s the next thing it could be?
@thndr_54683 ай бұрын
Super easy! If you have the correct tools, money know how and time.
@WailingHang4 ай бұрын
Do you need to check front and back and both sides
@dpdiver14 ай бұрын
You're telling me a bad wheel bearing is going to cause loose steering?
@starzlegendz34455 ай бұрын
Where are you located
@1AAuto5 ай бұрын
+@starzlegendz3445 Our video studio is based out of Massachusetts. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@lynseybergman6145 ай бұрын
Yeah so no way it's the u-joint. Why do you assume it's those other parts that are the issue those are the most expensive.
@javier-m758 ай бұрын
it looks easy when you have the right tools.
@ReviewMyVideos9 ай бұрын
My wheel bearings have no play and had the dealer replace both outer tie rods, both upper and lower ball joints and the drag line on my F250. But there is way too much play in the steering wheel. Help!
@loganlawlyes1980 Жыл бұрын
If your wheel bearing is really bad you should just be able to pull the whole tire assembly off in one go
@slowpoke8585 Жыл бұрын
I got into an accident on the freeway where I slammed down on my breaks and collided with someone and now my steering wheel is extremely loose. Any ideas what it could be specifically? I’d appreciate the help!
@tmoelowg713 Жыл бұрын
So that little bearing that was push forward on the old part of the inner rod was a bad sign right ? It’s not suppose to have that type of room
@johnagricola5954 Жыл бұрын
best video, qusetions can the Rag joint or steering couplink can cause the type of play in the wheel?
@mehdiremidi8632 Жыл бұрын
is it normal for the steering wheel to feel a bit tighter ( not stiff ) near the middle ? and less tight near full lock?
@1AAuto Жыл бұрын
+mehdi remidi We would suggest taking your vehicle to a local mechanic to take a look at the issue. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@lebronjames1941 Жыл бұрын
What about a steering wheel that just keeps spinning but doesnt turn the car left or right? Like it isnt catching or the steering collum came lose. What could it be?
@eddieo7660 Жыл бұрын
None of this fixed my problem
@LilBill1632 Жыл бұрын
I have a problem with my 99 GMC Yukon My steering car is loose I replaced the entire suspension plus the rag joint and The steering wheel still has a lot of play what can I do?
@kylenajjar4548 Жыл бұрын
So I bought new wheel hub assembly and new cv axles. Still have this issue. Any other suggestions? Tie rods and sleeves are new as well.
@AlamoCityCello Жыл бұрын
Great tutorial!
@danielcisa107 Жыл бұрын
Remember to dent back inwards the axe nut edge as an extra safety
@ferdiebiojon87612 жыл бұрын
Hi I've been watching your videos and a subscriber too. Just a question what will be the cause why I am hearing clunking or sounds like scretching noise everytime i step on the brakes slowly. But continously running i do not hear any noise. What will be the possible cause. Hoping to hear from you soon. Tnx
@ahmadfaris_g3b2 жыл бұрын
thank you for sharing knowledge and sharing information on how to overcome a loose steering wheel..Succes friend
@pathtoauto11672 жыл бұрын
Is there any other causes too a loose steering wheel besides outer tie rods and where bearings.
@AceHernandz2 жыл бұрын
bad ball joints and maybe control arm bushings thats all.
@jaeb.28422 жыл бұрын
I watch this channel everyday!!! Love it!!!
@jeffreygarcia86692 жыл бұрын
Great tutorial that you kick out.Maybe give some advice on something?my 2005 envoy 5.3 gmc,while mobile my locks be jumping on/off as well on dash the park to drive indicators jumping back and forth. Would you please give advise on that,ty and keep up good work with your tutorial.
@rudy54542 жыл бұрын
Would you recommend using a starter fertilizer separately after seeding or using a mixture of fertilizer Starter mixed with grass seeds that they sell in a bag.
@chrisstromberg65272 жыл бұрын
I would definitely not use any gasoline that has been sitting in a can for over a year, even you did use Stabil. You are just asking for trouble!
@namechange94702 жыл бұрын
🤣😂🤣
@bronx-gr2 жыл бұрын
Unlike majority of other 1A auto videos, this one is a bunch of horse sh*t. Right, changing bearing is that simple. Right, inner tie rod is just a snap-of-a-finger replacement, plug and play. You didn't mention how to secure the boot, how to grease the inner tie rod ball, how to count number of threads on the outer tie rod. Just glossing over trying to sucker people into some serious trouble. Create some quality responsible contents, people. No more BS please.
@EdyAutoservice2 жыл бұрын
Trmksh sudah berbagi sir
@bensontemu93562 жыл бұрын
Nice
@notme91842 жыл бұрын
🤩🤩🤩
@alexdamron31702 жыл бұрын
I drive a 96 Chevy hopefully this will help the loose ass steering 😂
@snowboardslider242 жыл бұрын
Favorite part is the blooper reel.
@3dplanet1002 жыл бұрын
Great video as always. I had a 1990 Accord that one day I was parking and when I turned the wheels, I lost the control over the steering, and I couldn't turn one of the wheels. That was super dangerous, and am glad that happened when I was parallel parking, good thing it didn't happened in the highway. My mechanic fix it, but I can't recall what was it. What could it be? A tie rod? How can I never felt play in the steering? Thanks.
@daniellai35352 жыл бұрын
May I know that if the steering rack is always tighten firmly n do not have any free movements at all???
@mendonesiac2 жыл бұрын
It helps to measure the outer tie rod before removing to get the jam nut in roughly the same location, otherwise you might not be able to make it to the alignment shop
@henrypauley48772 жыл бұрын
It’s just a quick video don’t overthink it
@jaywires7172 жыл бұрын
No measuring needed for the outer tie rod, Just count how many turns it takes before it comes off & use the same amount of turns to install.
@ajtherichkidjunior80902 жыл бұрын
Good night to you all am from Jamaica can you send me all the doors hang for my 2001 Honda Odyssey in side on out side text me and let me know if you can send it to me send me all so the price
@My87653092 жыл бұрын
Got to love the bloopers
@zkdadof42 жыл бұрын
I've also found that the steering midshaft joint can wear and cause play in the wheel.
@geraldwardrop2 жыл бұрын
👍
@reneshacurry83242 жыл бұрын
Where is this shop located? I would love to bring my car to y'all! Xoxo 🙏🏾❤
@Djevan415982 жыл бұрын
Westford Massachusetts
@buddyrebel_Garcia2 жыл бұрын
@3:43 that’s what she said
@cardo11112 жыл бұрын
Good stuff 👍🏽
@HotRod-wv4vm2 жыл бұрын
When replacing tie rods should you replace inner and outer if only one is bad?
@rp420692 жыл бұрын
Can you do an video on steering rack bushings and seals? I learned the hard way after replacing everything else. The video would help save others $$$. Thank you for all you do!
@sexileomama12 жыл бұрын
Thank You!! You make it look so easy!! 😁
@Hi-lb8cq2 жыл бұрын
I don't have any of these tools...I have not much of anything at this time...I was homeless for 10 years and I'm still getting off my feet...
@Hi-lb8cq2 жыл бұрын
When I get on grooved roads like the highway my 1996 Hyundai accent well move around..