Hotpoint NSWE743 Washing Machine Demo

[@johnlarge9317]

Our Hotpoint washing machine gave up last night with a thud and the pump drive smashed in two. We can't complain we have had it since 2006 with only motor brushes replaced once. Just ordered one of these New washing machines watched your video and thank you for your help. You were pleased with the design and that persuaded us to purchase one it arrives 6th March. Let's hope we get 14 years out of this one we'll see.

[@lords-electrical]

Hope you enjoy your new machine, thanks for the feedback

[@dianepeters2661]

I've just got this washing machine and your video has been a brilliant help thank you so much

[@lords-electrical]

No problem glad this was helpful for you, thanks for the feedback

[@camvin575]

Just brought a hotpoint 10kg invertermotor (not sure if that is the make lol) in black and its a lovely machine but I couldn't figure out the steam hygiene. So glad I watched your video as you broke it down nicely. Thank you.

[@tehs3raph1m]

@Igors Kurockins if it's the 1044c the feet are small and tight at first and you may need to (I had to) lift that corner of the machine to turn the foot

[@angelmouses]

Very useful video, especially the part about the coin trap and various programs available.

[@norulislam1936]

Great detail to specific load washing I have recently purchased 7kg model so very useful information thank you.

[@christineburrows8681]

Great video with super easy instructions. Thank you.

[@harrycarter9129]

Can you tell me how to setup the timer in detail, thanks

[@rosalindheaver1110]

Very helpful, clear and precise, thank you .x

[@leeannekemp8424]

I've been given an 8kg version so far very happy but so glad I watched this as I had no idea how to cut the wash times down thanks

[@lords-electrical]

Glad the video was helpful, hope you get on ok with the washer and thanks for the feedback

[@lindamorgan3692]

Loved the video, really guided me round the various programmes, thank you

[@ryankelly5524]

I should have mine this Saturday thanks too this video. Hope Curry’s have fun lumping up the stairs to my flat 🤦🏼‍♂️

[@lords-electrical]

I am sure you will get on fine with this. Good luck getting Currys to deliver upstairs as quite a few of their delivery guys refuse to go upstairs especially with a washer.

[@daveprice6870]

Nice clear video! Thank you

[@Catgordon224]

Thank you Very helpful Just bought the 9. Kg / 1600 spin version So far so like !

[@lords-electrical]

great to hear

[@rayjones3090]

Thank Goodness for this demonstration, I now can relax and enjoy using the machine

[@lords-electrical]

You are welcome!

[@Simon_Nonymous]

Very useful - all I wanted to know was where the filter was hidden!! Thank you. (We had an Error F 05 which was caused by all things, a dog poo bag that someone had left in their trouser pockets...)

[@lords-electrical]

Oh dear but well done for sorting it out. Thanks for the feedback

[@lindaallsopp5324]

Very informative and helpful, great video

[@irenelloyd5509]

Great video, thanks.

[@Kubulek17]

Got this machine as a replacement during the Hotpoint fire safety exchange scheme. I think it's much better looking than the model it was replacing but all the cotton cycles are over 3 hours and I think that's ridiculous, the rapid option isn't available on cotton or eco-cotton cycle, and on the white program it caps the temp at 40c. This machine doesn't have a steam generator, to perform a steam cycle it drains after the wash, fills the bottom of the drum, and then heats that water, a prewash option would've been much better. The spin cycle is pretty good and leaves clothes dry and the 45min full load uses lots of water rinsing the clothes well. For the price its a decent machine but it would definitely not be my first choice

[@lords-electrical]

Great feedback thanks

[@stuartjebb3258]

Wow just got one of these for £35 pounds was shocked when I seen how new it is. I Just put hotpoint 7kg washer in google search expecting to have to search via images for the model number so i could read the instructions and it was on every site currys ao and many more for around £290 😂 what a bargain doesn't even look like it's been used its so clean not even any trace of washing powder I'm so chuffed works mint .Great video better than reading instructions lol. But still don't no what draw to use for a 30 min wash lol.

[@susanllewellyn2369]

just had this machine very help full thanksxx

[@lords-electrical]

Glad it helped

[@judithowi3315]

What's the right temperature to use for the effective washing

[@lords-electrical]

Really depends on what you are washing and how dirty it is. most of the time a 30 or 40 degree wash should be ok. Clearly for whites you would go hotter to the 90 degree programmes

[@judithowi3315]

@@lords-electrical is it the temperature that determines how clean your clothes will be washed

[@judithowi3315]

Am sometimes forced to hand wash my clothes first before putting them into the machine

[@9999classy]

Thank you However you never mentioned the dryer part ?

[@lords-electrical]

This is a washer only it doesn't have a dryer section

[@sxceve25]

Hi. sometimes am wanting a quick 1600 spin how do I that without starting the machine up again.

[@bonesawarm6987]

I normally use the mixed fabric setting with steam hygiene... but damn all the cycles are long.. I know there is quick washes but don’t come out as good...

[@dorisoseimensah3988]

I feel it take long to wash and I don't understand the h2o, meaning. Please explain. It is doing my heading.

[@shayan6130]

How do you get it off demo mode

[@washerstuff]

amazing content, i love your voice

[@lords-electrical]

Thanks very much 😊

[@g-neo4041]

How do I take off the demo on the washing machine

[@TheSumyan07]

Very informative nd helpful. Can wash programme be reduced by some mins?

[@kerrymilne2494]

Great thanks. Could not work out from the poor instruction leaflet. An expert now

[@lords-electrical]

Thanks for the feedback, glad it helped

[@taslimakhtar9094]

Which slot do i put washing powder in,at a 45,min wash.Also can i add bleach for my whites.please repley.just bought one yesterday not used it.

[@larry90944]

Hi you should only ever have bleach in cold water. Hot water creates a reaction that can be hazardous to breathe in.

[@sxceve25]

Thank u..very helpful. ☺

[@jonathansims2862]

Would love to buy another hotpoint machine had my last hotpoint 10 years. Since then I have bought other brands would love another hotpoint but frightened it will catch fire don't trust hotpoint anymore any advice will these newer machines catch fire.

[@lords-electrical]

The chance of an appliance catching fire is very very slim. We still sell a lot of hotpoint appliances and haven't had any issues with any catching fire.

[@jaidebuttigieg2075]

Does this have adjustable feet underneath

[@lords-electrical]

The front feet can adjust a little bit, but just really to a floor that may be uneven a little

[@hesamyakubi2878]

Hia I need help with my Hotpoint machine. When it comes to the risning/drying, it get super powerful and moves the cabinet. Though I have changed surface it is sitting on with different items/material.

[@lords-electrical]

If the machine is level and on a solid surface it shouldn't move when the machine is spinning. I know it sounds strange but are all of the transit bolts out of the back of the machine. If at least one is still in then the machine can move when spinning.

[@nzimbikitumba4605]

You alright matie There’s dor nots at the back I had the same problem if you haven’t figure it out yet you have to remove them mate Have a nice one

[@unknown.9019]

I got this washing machine a few days ago. The review say it is quiet but when it spins it is very loud, moves and the vibration is crazy. Please help.

[@lords-electrical]

You need to check to make sure the transit bolts have been removed correctly. If they are still in then the machine will move around and can vibrate a lot. Do not use until the machine until you have checked this.

[@bonesawarm6987]

all machines are loud when spinning

[@sweetcherryblossom9708]

It's so quiet when washing. I think that's why the spin sounds extra loud in contrast.to the quiet wash

[@teresatowle7165]

Very useful, thanks

[@briancarlisle8886]

do you have use colour catchers to use mixed load setting

[@lords-electrical]

If the clothes that you are washing are quite new then yes I would recommend the colour catchers, but normally if they have been washed several times then you should be ok without.

[@iantomo5185]

Who else misses the old washers put your stuff on blast then stop the thing mid cycle ,Then the door will open .Today You have to be a brinks mat robber to open the door mid cycle .

[@shamimahmad4641]

thanku.😊

[@mizzmention8555]

I keep my dispenser draw clean but sometimes the fabric conditioner runs through into the wash, can you tell me why it keeps happening?

[@mikeralph5855]

What temperature is off

[@lords-electrical]

When the temperature is switched off then it will just wash in the temperature of the water that arrives in to the machine.

[@hadjbourdoucen4646]

very interesting. Thanks

[@mrstouseef6022]

How do you exclude the spin to just drain the clothes please? There are no instructions in the booklet explaining how to do it, but it mentions that the Rinse can be excluded......

[@cosettapessa6417]

With the spin button

[@user-dp5ju3gc1t]

I got this and it spinning out off control and banging in sid brand new and hot point not available at the minute as well

[@lords-electrical]

First thing is make sure you have taken the transit bolts out. If you haven't then it will not spin correctly and will damage the machine. Stop using the machine until you have checked they are all out.

[@bonesawarm6987]

Transit bolts still there idiot

[@Annyuchenna]

Please sorry to bother you so much. How do I measure the quantity of water for washing?

[@lords-electrical]

You don't need to measure the quantity of water for washing, it will take in the amount of water required for the load depending on the quantity of washing in there. You will need to make sure the cold water tap is turned on though to make sure the flow of water is enough.

[@rodimousa9503]

Nice video

[@cylindawasher7478]

Does the rapid decrease the spin speed?

[@lords-electrical]

It shouldn't do normally

[@cylindawasher7478]

@@lords-electrical aha i guess it was just one model

[@hajiabintuharuna765]

How much

[@nikitatrainor3982]

Iv bought this and cannot get it started keeps saying h20 and lock icon wont go of display nightnare

[@lasanthabandara7455]

How to reset factory settings..quick help me

[@Annyuchenna]

I connected d water but is not flowing inside

[@johncremin5853]

Hi is there any chance you know hove to take it of demo mode. Many thanks

[@johncremin5853]

How sorry

[@saheralwan8600]

I cleaned the filter and now the panel won't go back in , how can I solve it ? It keep coming off? Please help.

[@lords-electrical]

Normally you locate the lugs at the bottom and push the top part up to relocate it.

[@saheralwan8600]

@@lords-electrical ok thank you for replying, just fixed it back 👍🏻

[@AnayeliBaltazar-z8y]

Una disculpa se bloqueó la lavadora y no puedo debkoquearlo la verdad esque no entiendo ingle. Una disculpa i espero y me puedan apoyar es la misma Marka

[@lords-electrical]

Deberá sacar la máquina para ver si la obstrucción está en la tubería de desagüe de la máquina o en la tubería por la que sale la máquina.

[@SylviavanEsschoten]

Can t get it of ‘DEMO’😫

[@joannejack158]

When I use 45min wash the comfort won't go through why is this please

[@lords-electrical]

Hi, not sure why this would be, first of all check it is in the correct compartment, and also the pressure of the water is high enough. Sometimes if the water pressure is too low, it may not take all the detergent

[@joannejack158]

Hi thanks for reply we've had engineer out and it's a fault on programme 10 apparently so waiting on new parts it's a common fault with the make thanks any way

[@margaretshearsby8544]

Can I do a soak cycle

[@margaretshearsby8544]

And if so haw

[@Thebusguyplayz3]

Cool

[@psycharol]

Thanks, I would have boiled my Merino walking gear to oblivion!

[@hidayaelghazi6604]

Washing machine is vibring. Maybe I didn't move something from the bottom

[@lords-electrical]

If it is a new machine, just check to make sure that you have removed the transit bolts from the machinein the back. If not it can damage it and it will not be covered under any warranty

[@hidayaelghazi6604]

I did remove them but still vibring?

[@lemon-eu6kw]

Hotpoint is another issue. He's hot!! :)

[@daftvader4218]

Don't buy Hotpoint... Not the same quality as those made in North Wales before....

[@kavitasharma7179]

SOO USELESS