Beko BMN3WT3841 1400 Spin 8Kg Washing Machine

[@washinglad1400]

Finally a video of this new range from beko switched on and shown around! These were just released around last week and I’ve been dying to see what it’s like, I even went down to my local euronics to have a look at these in real life and saw the black one 😂

[@Nooziterp1]

Bought one today and it's being delivered tomorrow. Looks like I have made a good choice.

[@stevied8855]

Bought one today as pump went on old machine a week ago. Nice machine and really quiet on spin. Subscribed your channel as this was an excellent tutorial and simple to follow. Stevie in Fife.

[@thelaundrycookie1200]

the design of these is alright, just curious on the programming now. their energyspin feature seems to just be the machine accelerating into a 250rpm spinwash during the main wash, exactly like haier, midea, hisense and BSH. if it's programmed in well then it should be a good feature. not necessary for wash performance but certainly entertaining.

[@tprods2087]

Actually it's 300rpm for these Bekos

[@thelaundrycookie1200]

im aware. i wrote this before we had any videos of them

[@tprods2087]

Yay they're out at last! Interested to see what they're like :)

[@missymoo1568]

Ive just bought the 10kg one, it states there's a half load/quick wash and it takes 14 minutes, i cant find out how to do it, have you any idea?

[@tisbury30]

A very informative review, thank you for this. You show the auxiliary panel on the right of the machine with water mode, spin etc. and the FAST symbol there, but I do not know how this works. Should we push something else or buttons together etc.? The machine I have has the FAST option and shows that it enables up to a 50% reduction in washing time but I do not know how to enable this. Can you help please? Thank you.

[@lords-electrical]

if you press the Water Mode and Spin button at the same time, it should enable the fast option to save up to 50% of the duration of some of the washes

[@tisbury30]

@@lords-electrical Thanks so much. I did try that and it did not change anything at all. Just gave options for the water mode and spin. Then I persisted and tried again and it worked. Job Done, thank you so much.

[@maddogmaddocks35]

I came on here too looking on how to find the quick wash feature. I’ve tried pressing spin and water mode but nothing happens! The paper instructions are pretty useless… thank goodness for KZbin tutorials 🤣 I’ll try again!!

[@tisbury30]

@@maddogmaddocks35 totally agree, the paper instructions tell us the value, but not how to do so. I found that if you slightly and quickly press the spin before the water, it does work. Such a time saving feature I am surprised that Beko does not give more info. Good luck.

[@maddogmaddocks35]

@@tisbury30thank you sooo much! This absolutely works so many thanks. I actually thought my brand new washer was faulty as I couldn’t get this to work even after many attempts of pressing buttons together. Why are Beko not showing off about this great feature?! Crazy

Hi, I’m struggling to start any programmes! I hold down the start button, the door locks and then unlocks and just won’t start any of the programmes. I have started the programme before any washing is in the drum and afterwards. Any ideas?! Is there a knack to getting it going I just haven’t grasped? I have read the manual a million times and it’s less than 2 months old! Thanks!

[@fonsilvie2273]

Nice video, but I did not see where you started the machine.

[@lords-electrical]

The start and pause button is on the very right hand side of the control panel

[@tinaboyd331]

Iv got ine of these but it is taking ages to start is it the arrow button or the lines ​@lords-electrical

[@tinaboyd331]

​@@lords-electricalis it the arrow or the line button and y does it take a few press be for working is it faulty

[@josephdi-lenardo6637]

What’s the quickest wash that uses the least water please

[@matthewbanks187]

Can you do a video on the LG Washer Dryer ten kg with Turbo Wash?

[@bayanalkhatib5817]

Which washing machine has biggest porthole?

[@joyceproudlock1426]

Where is the start switch please

[@lords-electrical]

The start and pause button is on the very right hand side of the control panel

[@joyceproudlock1426]

@@lords-electrical Thanks I did find it at the finish

[@tomlewis8522]

How do you select the 14 min wash ?

[@charlieclarevlogs5169]

Did you figure it out ?

[@VossiWGP]

Where is the on button

[@lords-electrical]

The on/off control is via the dial, if you turn the dial to the top it is off, then selecting a program, the machine turns on.

[@andisa9197]

what is that Fast meaning?

[@rowerca]

Wow, plastic hinges are real!

[@lords-electrical]

Yes unfortunately, its a shame as i can't imagine it would be that much more expensive to use a metal hinge that is much stronger

[@Nooziterp1]

Not as strong as metal I would think. Making them look like metal is crafty!

[@vzz00]

how do you change the temperature to cold wash? im only getting hot wash

[@lords-electrical]

You can change the temperature on the display. Just make sure the machine is connected up to a cold feed, if you are only getting hot washes, it sounds like a hot connection has been connected up to it

[@vzz00]

@ how. would i check that please

[@newid10]

All I want to know is how o switch is on 😭

[@lords-electrical]

You just turn the dial to the required program, the press the start button on the right hand side

[@newid10]

@@lords-electrical thank you. I was tapping the button but then realised I have to press and hold it down

[@BogdanLupsea]

Looks like a gorenje wave active

[@li5a17]

This machine has awful programming!there must be better options, don’t go there with a barge pole

[@lords-electrical]

That's a shame to hear you are not happy with the machine

[@GrigRP]

What's wrong with the programming?

[@algeriaicook6034]

Where is the option whereby you can wash 2 kg of clothing! I am very angry with this design. Prefer the old one. All options are 2 hours except.

[@lords-electrical]

If you select the Water Mode and Spin speed button at the same time it reduces the quick program to 14 minutes rather than 28 minutes