Loud Scraping Noise While Braking in Your Car or Truck? You'll Need These Parts to Stop It!

[@1AAuto]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto √ Do it Yourself √ Save Money

[@viscache1]

I love how every you tuber takes the project apart first, puts it back together, perfects their method and then walks through with everything coming apart easily and smoothly…as if…

[@artmartinez4449]

Len is definitely my favorite 1a auto mechanic. 🥳🥳🥳👏👏👏

[@muvfast]

Awwwwww man, you could've showed us the difficulties of that rusted bleeder screw at least... No drama here... Good job

[@skeletor7908]

Oh no! Len is about to break into a song and dance number! 😂

[@WilliamBowden-u7n]

Thanks for the advice.

[@jamesrichardson771]

Very' Nice ! 💥 🛠

[@kkovler1]

where you get that rusty a brake system like that?-junk yard, never seen one like that unless it was just sitting around

[@ghorbanalirazmjou8591]

متشکرم از شما آقای محترم .

[@yigitmert4232]

2010 CRC videoları gelir mi? :)

[@viscache1]

“Rotting?” Rust, scale, pitting, corrosion, heat stressing, stress cracks, ovalation wear, elongation, horizontal sheer stress or fractures…delimitation of superficial plating wear/thread loss… there is a lot that ‘rotting’ doesn’t cover or describe.

[@djkatefrost]

Can we get info on which products you use each time? You tend to say 'luricate' or 'spray' but never actually specify with what. It's pretty important getting the right things on there

[@troyb6036]

I don't see the tool that was used to clean out the area where the slide pins go

[@marshallborder9089]

Great video , thanks .

[@koffinNAILS]

I dont open the bleeder i just open the lid to the break fluid the air pushes out to front

[@howtodoitdude1662]

Why don’t you want to push the brake fluid back to the reservoir? As long as the cap is loose, it should be ok.

[@rcran3412]

So you don't bleed your brakes after working on them?

[@maxxmich]

I have never opened a bleeder scre to push a piston back..... now u need to bleed the whole brake system.. to much work

[@michaelhyson]

How does one remove a screw on the Rotor that holds it in place? A screw driver doesn't work and the screw is screwed no pun intended. Can't remove the rotor without removing that one screw.

[@egx161]

Those are some crusty brakes. I would replace everything.

[@SillyMonkeys]

Thank you, really good video.