1959 Chevrolet Apache Truck with 353 Detroit Diesel Engine and two transmissions. Now a road Trip

[@ronaldscott781]

60mph in reverse. “ I like to get out of trouble quicker than I got into it.”

[@lovesloudcars]

That's gold.

[@ronaldscott781]

lovesloudcars kzbin.info/www/bejne/mneqd3aqYtR7eZI

[@AMCtilldeath]

Kelly's Heroes?

[@ronaldscott781]

AMCtilldeath Yes! Line said by the character “Oddball”.

[@2GringosOnTheGulf]

Lol😂 😅✌️

[@keithrinehart5700]

There is only one thing that is that loud n slow besides a sherman tank. A 59 Chevy with a Detroit diesel! 👍 Much love from the USA

[@paulhare662]

I think my 1970 Kaiser Deuce and a half is louder and the turbo sings like something from a bad dream.

[@lovesloudcars]

Thanks Keith! Been digging through a mountain of comments to get to yours. Glad you liked it. I've had tons of questions & views from this video and part 1 showing how it was built that I will have to make a part 3 showing more details like more shifting both transmissions.

[@lovesloudcars]

music or noise? -all in the perspective hey?

[@lovesloudcars]

I was told when I bought this engine that's where it came from. - wish I had 20 more of them.

[@Sheyi_Voltron1]

@@lovesloudcars PLEASE, HOW CAN I GET ONE?😍

[@portnuefflyer]

When I had my IH 3-53, I was living on a mountain (still do), with a 12% grade and 1600' to climb every night. The sound it made pulling that grade (with the water temps always cool no matter what the load was) was like this....great to hear it again! I shouldn't say this probably, but 40 years later I now drive a Prius, ha ha ha.

[@lovesloudcars]

That's hilarious. Certainly not the same sounding machine as back then hey?? I think I drive older stuff in comparison now than I did then! My work truck is an 82 International with a 466, just over 100k miles on it. Between this & part 1 there's enough questions I'll have to make at least a part 3 to show & answer some of them. Hopefully get some posted within the month?? (fingers crossed)

[@jlo13800]

An Evinrude BRP 1.9L 3 cyl G2 would be a good alternative to a 3-53. Its now the Rotax 1.9L 3 cyl outboard.

[@D1rtyDog]

She would've been a ringer for the recent Deboss Garage International Quarantine Car Show

[@lowrider967]

Thats a good shout, Proper missed oppertunity haha

[@lovesloudcars]

I don't watch TV - I assume it's a TV show? Between this video & part 1 walk around & explanation I've been swamped with questions & comments. Will have to make a part 3 I guess

[@TactlessBadge3]

@@lovesloudcars Deboss Garage is another KZbin channel that specializes with diesel engines and has worked on several detroits.

[@GregoryVeizades]

@@TactlessBadge3 Bus Grease Monkey would also enjoy this.

[@grahamburden4848]

@@lovesloudcars You're missing out if you don't know Deboss Garage. A knowledgeable Canadian mechanic with a great sense of humor who just wades through really cool projects. Way more entertaining than any of those dolled up, actor mechanics with their fake southern accents on TV. We have a '68 Kenworth powered by an 8V-92 Detroit 2 stroke on our farm that I learned to drive, hauling bales as a teenager. I'd always dreamed about dropping that engine into Grandpa's '58 Chev 1 ton. I gave up when I got out my measuring tape.

[@ElmerJFudd-oi9kj]

" Like a stampeding hird of turtles", you cracked me up man.

[@lovesloudcars]

Thanks! Just trying to tell it like it is. Tons of views on this and part 1, maybe I'll make a part 3 to show a bit more

[@MimicoBungalow]

I just keep coming back to this video to HEAR the Detroit roar!

[@lovesloudcars]

Me too. There's just something fantastic about that sound.

[@fredmartin3117]

It is something only certified gearheads will appreciate. Very well done. I considered doing the same many years ago to a 59 1 ton I owned that had a Armbruster double cab on it as the frame was extended 26 inches to accomodate the conversion. Never got around to it with all my other projects and stuff. Now I'm 81 and no longer do this type of things, but I certainly do appreciate others keeping up the good works and posting so we can see it. Thank You, Fred

[@lovesloudcars]

Wow Would that be a great truck to get hold of now days Fred! Will do my best to keep things like this going. I'm 30 years behind you but probably dislike the new stuff more than you do!! Got any old projects you need passed on?

[@pineknot1929]

Love that sound

[@grabasandwich]

If the words Detroit Diesel are in the title, it's probably gonna go viral 😆 love it!

[@lovesloudcars]

Glad you liked it. Tons of views on this and part 1, maybe I'll make a part 3 to show a bit more

[@donellmuniz590]

That's one of the Top 3 thumbnails I ever saw🤣. I can't imagine the context for it.

[@stanbarrington9698]

Phoenix AZ owner of a 58 Panel.Its driven during cool weather everywhere. So much more fun to drive than ANY modern vehicle.Your truck is ready to report for duty sir!

[@lovesloudcars]

That is cool Stan! I think the 58 and 59 are the best looking models. I've driven to Phoenix once and envy your winter weather. Planning to record some more footage of shifting and exploring things like what happens when both are in reverse. Stay tuned, stay safe and have a wonderful Christmas season.

[@inspireonex]

"if they don't find you handsome, they can at least find you hany"

[@lovesloudcars]

Yup! Hope you liked it. Tons of comments & questions on this video, will have to make a part 3 I guess. Hope you check out part 1 if you didn't already.

[@thomaswhite4199]

Ok Red. 😝

[@robertcraig156]

I love that truck ,a 4 ×4 thansmission, that means if you use both shiffters you have a 16 speed .awsome .i have driven a 5 speed with a 4 speed. auxiliary trans.

[@jamro217]

I'm a man but I can change if I have to, I guess.

[@TheIronFourth]

My Dad retired from Detroit. Makes me proud they run so well.

[@lovesloudcars]

That's cool Clay. Part of a very important & valuable part of history. There's lots of great engines out there, but those screaming jimmies hold a special place in a lot of hearts around the world. Part 1 was fun & will be definitely making a bit more of this one. Stay tuned!!

[@bernardboka4277]

I’m usually not much for patina, but she looks so honest and genuine. And the engine swap + 2 transmissions is genius. She looks like she’s worked hard every day of her life and she is Ready for more.

[@lovesloudcars]

Thanks Bernard! It's all genuine for sure. The patina thing is a new trend trying to appear like this one became naturally over the decades. I tend to agree with you that I'd prefer restored to have nice paint. My father drove this truck back & forth to the sawmill when I was a boy & i can assure you this was a WORK truck not a town version of it.. I'm not sure if you watched part 1 where I showed the walk around & explained how I put it together. You might enjoy that. I bought another 59 Apache this summer. & have all the components to build version 2! As you might see checking out my channel I'm always busy though & it's not the thing that is highest on the priority list just yet.. Stay tuned for further nonsense & entertainment my friend and thanks for your comment!

[@bernardboka4277]

@@lovesloudcars a truck I’d be proud to drive every day. Always been fascinated by Detroit Diesel 2 stroke motors… seems like they would be very efficient compared to 4 stroke motors

[@lovesloudcars]

@@bernardboka4277 I've always loved the Detroit engines. I probably have 8 or 10 of them.. If you're interested in crazy cool 2 stroke, look into the opposed piston engines! Achates is a new(ish) company messing with them. I first saw on in an airplane museum. German built around second was "Junkers" certainly spelled wrong. Two stroke opposed piston diesel airplane engine. 6 cylinders 12 piston 2 crank shafts, no head or valves. Fantastic.

[@bernardboka4277]

@@lovesloudcars I’ve heard of those. Seems Mercedes or Porsche have been experimenting with them.

[@Kris-mr7pf]

My god that gave me chills when she came to life. Gentlemen once again that is off to you and that beautiful machine. Christ she sounds amazing!

[@lovesloudcars]

Glad you enjoyed it. I LOVE how it starts & always did. Between this video & part 1 walk around & explanation I've been swamped with questions & comments. Will have to make a part 3 showing a bit more I guess.

[@Kris-mr7pf]

@@lovesloudcars looking forward to it my friend. Just the inventiveness of what you've done is super cool! Thank you for sharing!

[@fexploder3281]

That is one of the coolest Chevy Detroit Diesels I have seen so far.

[@lovesloudcars]

Thanks! It really is a cool truck hey? Got new tires and rims finally this fall, so hopefully will get a chance to make a few more videos of it including shifting and exploring things like what happens when both transmissions are in reverse. Stay tuned for further nonsense and entertainment my friend.

[@fexploder3281]

That sounds pretty cool, I hope your project goes well! 👍

[@donkristinnson4201]

I’m from Manitoba and bought a 1959 Chevrolet Apache fixer upper over thirty years ago. I swapped it a rebuilt 261 Pontiac motor,bought retreaded 19.5 Michelin retreads and put new brakes in then extended the frame to put a 12 foot deck on although I still have the original 9 foot step side box for it yet. I then taught myself to weld by building a 24 foot long gooseneck trailer which I still have also. I hauled everything from round bales to logs to lumber to tractors with this rig and never broke anything mostly because I never let anyone else borrow it!After I quit farming and moved to an acreage I brought my truck with me and used to start it almost every year but neglected it for a couple of years until last fall when I got a friend to help tow it into my yard Wish me luck!!!with the brakes stuck but we got them loose enough to do that.So hopefully I can get it running and play with it again this year!

[@lovesloudcars]

Fantastic! I'm filled with excitement and jealousy at the same time. I think the 59 is the best looking truck Chevy ever made. I hope you checked out part 1 as well. Stay tuned for further nonsense and entertainment my friend. Will you be posting videos of yours? If I was closer I'd want a video of it myself. Yesterday I posted a video of a whole bunch of fixer uppers.

[@streetsmart1164]

That's a cool sounding Apache . Sixty mph, in reverse ? Hell, that would surely give " Mater" a run for his money.

[@lovesloudcars]

Thanks! I think it was close- hard to clock it & far beyond safe backing up speeds by then. If I can figure out how to do it safely I'll do it. Tons of comments & questions on this video, will have to make a part 3 I guess. part 1 & 2 have created lots of questions.

[@streetsmart1164]

@@lovesloudcars First, You're Welcome.. I think a "in reverse" race video is in your future,.. your Apache against a late model something.. the roll out on the vids is great, keeps 'em coming back for more. Great job, LLC !

[@rickdickerson1204]

I used to be 50 once upon a time. I love the sound of that Detroit. I'm a long haul truck driver and I always loved the old two-stroke Detroit Diesels. :)

[@lovesloudcars]

Me too. Saw a video the other day of a 66 Hayes with a 1671

[@Chevroletman5]

That's an awesome truck guys, if you ever sell it I'm sure someone would clean out a bank account for it.

[@lovesloudcars]

Thanks Lyle. Probably wouldn't even sell it to Jay Leno . Between myself & brother & our sons it's likely to stay close by.

[@lovesloudcars]

Not too bad... Keep watching for more Steven!

[@Chevy4x4dawg]

@@lovesloudcars That is a great idea!¡. Keep it in the family!! My uncle sold all my granddad's trucks and farm equipment.......... I was lucky to get a few items. One being a 1963 Chevrolet pickup!!!!!

[@Chevy4x4dawg]

@@lovesloudcars That is a great idea!¡. Keep it in the family!! My uncle sold all my granddad's trucks and farm equipment.......... I was lucky to get a few items. One being a 1963 Chevrolet pickup!!!!!

[@donellmuniz590]

I'm a small time, part time scrapper. Supplements my pension, gives me somethin' to do. I found a blown up 3-71 in the local dump years ago. It was disassembled. I grabbed the blower and sold it to an old hot rodder for $150! He knew how to rebuild em for gas engines. A year ago, I found a 4-71 at the same dump. It's on a Reservation on the coast, and we got a ton of old, wooden fishing boats. Would love to find a 6-71 blower someday! Anyhow, lotta Detroits out here, still.

[@lovesloudcars]

An endless supply of potential projects.. I'd probably end filling 50 acres with junk that would sell for 3 cents after I die. I probably have 8 or 9 Detroit engines plus a bunch of other stuff. Might do a Detroit collection video..

[@scalingshrimp574]

That is the coolest farm truck hot rod diesel truck I’ve ever seen

[@lovesloudcars]

Thanks! I'm kind of in agreement with you- apparently you and I are not alone though, I was hoping to get some views but wow! I've been buried with tons of comments & questions on this video, will have to make a part 3 I guess. Hope you check out part 1 if you didn't already.

[@jimmychanbers2424]

Hot rod? Its made for pulling

[@lovesloudcars]

@@jimmychanbers2424 maybe we'll have to modify the meaning of hot rod??

[@jimmychanbers2424]

@@lovesloudcars yep. Any jack ass can lower a pickup and drop a pos cumminig in it and think they are cool. Take a regular Gm pickup and leave it alone with a gm detroit. That is nice. Not everybody wants a dropped midget vehicle

[@jshenderson8147]

The 3-53 has always been my favorite sounding jimmy. The Coast Guard used it in the 26 foot lifeboats they carried on the cutters. Nice to hear one again.

[@lovesloudcars]

Bet it puts you right back to a specific place & brings a smell to mind as well! Between this video & part 1 walk around & explanation I've been swamped with questions & comments. Will have to make a part 3 showing a bit more I guess.

[@scottyjones27]

I would drive that machine everywhere I go!!

[@lovesloudcars]

I used to! it's a great truck Between this video & part 1 walk around & explanation I've been swamped with questions & comments. Will have to make a part 3 showing a bit more I guess.

[@scottyjones27]

@@lovesloudcars gets ya some New 8 ply tires , freshing up brakes , put that MACHINE in high range N get her on the big road to Coco beach Florida!!

[@jmikronis7376]

The noise police would show up, there’s always some sorta police to give one grief!

[@dnovello]

What a beautiful truck!! Thanks for taking the time to share all the details of this beast with us!

[@lovesloudcars]

Glad you liked them. Tons of views and questions from both this and part 1. Will probably need to make at least part 3 to show more!

[@williamkirkland7002]

I love it when someone says you can't do something yet you show them otherwise. Add a two speed rear to what you have and that baby would really fly. It's a nice looking old girl with a country grown attitude....be careful with those split rims though; if they come apart they can be deadly.... in some states; DOT won't allow them on the highways any longer. Florida is one of them. Thanks for sharing from ShadyHills, Florida. USA.

[@lovesloudcars]

Yes they don't have the nickname widow makes for nothing... Between this video & part 1 walk around I've had a surprising amount of views & comments ( almost buried trying to get through them). Will have to make a part 3 at least to show a bit more detail & fun I guess. But first replace the tires that are older than 75% of the viewers & make sure she's roadworthy. Got to take out my corvette yesterday though! hope you check out the channel if you are interested -lots of family friendly variety.

[@thomasclay8952]

I’m so happy knowing someone knows how to shut down a runaway engine, better and less expensive fix

[@lovesloudcars]

I've heard of a few runnaways & been around a couple.- watched lots on you tube. Glad you liked the video. From all the questions & comments from this video as well as the part 1 showing everything in the walk around, I'm going to have to make a part 3 at least to show the gears & shifting & speeds a bit better for sure.

[@spencerhurley2395]

Id take this over any sema “truck” nowadays

[@samdittmar5142]

Same

[@lagoonrd4173]

That’s a bad ass set up, turbo in near future?

[@lovesloudcars]

Don't know about a turbo. probably if I had one kicking around.

[@lovesloudcars]

every day

[@theeoddments960]

lovesloudcars I’d say all the old girl needs is some serious highway gears in the back, I’m not sure what the gearing is right now but she’s screaming in both fourth gears haha

[@MimicoBungalow]

Absolutely fantastic! I’ve always love the style of this truck and I love you guys style with two transmissions and a Detroit diesel! I am in Ontario and I’d just love to see this thing up close. You know this would be a great truck to show. Excellent! The body seems pretty good and I could just imagine it done up in its original colour with the original chrome installed. Nothing like the sound of a Detroit diesel even a little one like this.

[@lovesloudcars]

Yup . I love the dual headlights way better than the singles. A Detroit just has something about it hey? I like your name by the way, did you get a kick out of the Tax me hat? If you're ever in North Western Alberta come on over & we'll check it out. Hard decision to know what would be best - show room restoration or more rat rod style with the patina paint... I'm planning to record some more in the spring, like more shifting, maybe some drone footage & exploring what happens when both are in reverse, so stay tuned! Meanwhile other things like blowing up beaver dams, and less exciting weekly adventures.

[@ebinmaine]

What a wonderful piece of machinery. Great to see it up and running.

[@lovesloudcars]

Feels good to drive it! Tons of views and questions on this and part 1, maybe I'll make a part 3 to show a bit more

[@ebinmaine]

@@lovesloudcars I'd look forward to it.

[@juststeve7665]

my Grandpa had dual 3 speed transmissions installed similar to your setup back in the early 1960s. the old timers knew this would work but Ive had a tough time over the years getting anybody to believe it. Thanks for the test ride. I love the sound of a 2 stroke Detroit! The only other time Ive seen a Detroit 3-71 into a Chevy (a 70s square box) it had a Clark 5 speed and a Browning over under box behind it. It was a workhorse!

[@lovesloudcars]

That's fantastic! Glad you found the video and made a comment.. I'd have loved to see that truck! Stay tuned for further nonsense and entertainment my friend! Did you see part 1?

[@riitaalin]

I rode in one of the first automatic transmissions in a Semi back in the 1970s made by Detroit Diesel in Indy. I will never forget how proud they were of it when they demonstrated it during a short ride & told me how rare & new it was. Detroit diesel was also merging with Rolls Royce on making aircraft engines at the time. I think maybe Detroit Diesel was working on the fan blades at the time. They were a wonderful company at that time. That transmission was really something back then. That sound really brings back memories.

[@lovesloudcars]

I bet it brings you right back to a certain place! sounds & smells do that hey? Lots of Detroit lovers like myself around the world. Between this video & part 1 walk around & explanation I've been swamped with questions & comments. Will have to make a part 3 I guess.

[@alcopower5710]

What an outstanding job you did with this project. I’d never get rid of her. Thanks for sharing

[@lovesloudcars]

Glad you enjoyed it Alco! We'll have to make at least part 3 to answer the questions & requests & I'm just STARTING on going through the comments.

[@2020jd]

This thing is badass! The double transmissions are genius. Hope to see more of it in the future!

[@lovesloudcars]

Will have to put out a # 3 it looks like. Tons of comments & questions on this video as well as part 1.

[@davidcummins2418]

Sounds great. I drove a semi with a Detroit diesel in the 70s.Brings back old memories. Thanks for sharing.

[@bullcraphere1316]

well, as far as i know those are both 1:1 transmissions. that means they have no gear reduction ratio. if so it doesnt do anything lol

[@bradkalinowski7143]

@@bullcraphere1316 That’s the point of mounting the second one backwards. When you’re in a lower gear, what is happening normally? The input shaft is spinning faster than the output. So when mounted backwards, the input shaft (which is now the output shaft) in 3rd, 2nd and 1st is now spinning faster than than the shaft coming into it from the first transmission.

[@TheMrDarius]

“It’s got four gears in reverse. You can kill yourself in either direction.” Lmfao my man that’s great commentary.

[@lovesloudcars]

Well I'm glad you enjoyed it it certainly wasn't one of those well-rehearsed and scripted documentaries like you see on TV. I still need to make a couple more videos of it exploring things like what happens when both transmissions are in reverse and get some better footage of shifting and i'd like to get some drone footage of it that would be fun but as you can see for my channel I'm always busy. I thank you for watching and also for your comment. stay tuned for further nonsense and entertainment my friend.

[@h2oboater]

That Rig is Absolutely Beautiful.. Fantastic Sound too.... 👍👍👍👍👍👍👍👍

[@lovesloudcars]

Thank you for the compliment and watching the video. Hoping to capture some more footage of shifting and exploring things like what happens when both are in reverse. Stay tuned and I'll try to get more recorded whenever winter finally leaves.

[@austinalbright9837]

This brings back memories. I remember being in front of Kenny Isom Industrial Engineering Caldwell, Idaho listening to a 353 Detroit ideling in a Toyota Land Cruser. Had to be about 1973 or so. I remember he had a browning behind the main box. Think browning was three speed but that was a long time ago. Fun listening to driver shifting after leaving business putting her up thru the gears. Nothing like the sound of a 2 cycle Detroit. The primary reason I am deaf today as an owner of a International 4200 conventional with a 318 Detroit. Oh to be young once again.

[@lovesloudcars]

The good ol 871! If I had an auxiliary I'd have likely used it instead , but This worked good. ( don't know if you watched part 1) Glad you liked the video

[@cranerigging3604]

I love it ! There's only two kinds of engines .... Detroit Diesel and the other brands LOL !

[@lovesloudcars]

That's funny. Keep your Yellow one on the road too!!

[@mlez7197]

that sounds very intimidating...that truck should be in production...chances are I be on a waiting list...

[@lovesloudcars]

I agree 100% tough, cool, usable, character,. Just plain good idea. I wish I had 50 of these. Part 1 walk around was fun, this was more fun. Planning to make a couple more to show & demonstrate a bit better detail & answer questions like "what happens when they both are in reverse?"

[@dontcare3430]

Got to get me one of them Detroit!!!! And a couple of transmissions.

[@lovesloudcars]

get them & build on! Between this video & part 1 walk around & explanation I've been swamped with questions & comments. Will have to make a part 3 I guess

[@alb5753]

This is the coolest truck I’ve ever seen, without a doubt.

[@lovesloudcars]

Thanks for the compliment. I agree with you. All the character and unique things, plus the 58 and 59 are probably the best looking truck ever built by Chevy. I hope you checked out part 1 showing how it was put together. Stay tuned for further nonsense and entertainment too. I'm planning to record some more footage of shifting and exploring things like what happens when both are in reverse. Hopefully some good driving and drone shots as well.

[@donalddoty5768]

I've been know to do a little rigging in my life, but sir I bow to you. Well played.

[@lovesloudcars]

Thanks Donald. Glad you enjoyed it. If you didn't watch part 1 showing how it was put together you might find that interesting. Hoping to record some more footage showing a bit more shifting as well as exploring things like what happens when both are in reverse. Meanwhile stay tuned & I'll do my best to share entertaining & interesting things.

[@TestECull]

that thing is a doll! Flashed off like she'd been running an hour previous and sounds amazing. Keep 'er keepin' on!

[@lovesloudcars]

Like I said in part 1 that's how she started all the time. Always fun.

[@TestECull]

@@lovesloudcars almost wonder if the battery took a charge while you were drivin' the thing. Did you try bumping it on the starter?

[@TBONERESPAWN]

2000 subs with 7000 views in less than a day? This vid is gonna blow up

[@lovesloudcars]

Crazy hey Tbone!!! Between this video & part 1 walk around & explanation I've been swamped with questions & comments. Will have to make a part 3 I guess

[@j.harker8311]

I'd pay good money for it the way she sits this to me is automotive perfection like to see what my other favorite Canadian peg thinks of it

[@lovesloudcars]

No such thing as perfect ( no jake). - close though. Between the tons of comments & questions on this video as well as part 1, I'll have to put out a # 3 it looks like.

[@j.harker8311]

Ah no Jake you've got me there sir either way damn fine build good job

[@fernandomartinez5812]

I'm in heaven watching this video. Thx for the video.

[@lovesloudcars]

Thanks Fernando! I enjoyed sharing it & am pleasantly surprised at the amount of response. I've always loved this truck & wondered who else might like it. Between part 1 walk around & part 2 driving it, I've had tons of feedback & questions. I'm definitely going to be making a couple more at least to show things a bit more. Stay tuned hopefully I'll be able to get them soon.

[@vancouverman4313]

This guy would make a really good reality show. Amazing ingenuity

[@lovesloudcars]

I don't mind trying but would be tough to pump out quality original for a long time without some massive budget & time. so far this hobby has paid me zero, But I'll do my best! Tons of comments & questions on this video, will have to make a part 3 I guess. Hope you check out part 1 if you didn't already.

[@roccoconte2960]

Looks like a lot of fun, love to see that 59 going down the road.Good luck with her and have fun.

[@lovesloudcars]

Between this video & part 1 walk around & explanation I've been swamped with questions & comments. Will have to make a part 3 showing more driving & shifting I guess.

[@lpbulldogs1]

When u can let off the clutch and it not even change rpm that’s how you know it’s low gear for pulling

[@lovesloudcars]

That's the truth.

[@plumbingstuffinoregon2471]

I've got an old Ford like that. Let out the clutch in first and it'll start moving even with your other foot still on the brake.

[@mikebrown8065]

That's one of the coolest trucks I've seen in a long time!! Thank you for sharing, hope to see more of her in the future!!👍👍👍

[@lovesloudcars]

Will have to put out a # 3 it looks like. Tons of comments & questions on this video as well as part 1.

[@wrdlmbrt1956]

Canadians are so " Cool " ... compared to most of Americans .... which I'm a Texan born and raised & still here in Texas ( 64 years) ... anyway... listening to this Canadian talk and while explaining about the Pickup... I had flashbacks of the movie " Fargo " LOL! The first Pickup I drove that had a manual transmission was a 56 Chevy 6 cylinder gasser 3 speed when I was 19 years old... working for the College yard maintenance crew! They had 4 old 50 model Chevy gassers and a couple of Fords . I would like to own an Old 50 or 60 model Chevy Pickup ( Gas) ... but I wouldn't be able to work on it being disabled after having to have back surgery 11 years ago! ( Degenerative Disc disease, 8 Titanium rods and nerve damage) ... I enjoyed the video... thanks for sharing! 👍👍😎

[@lovesloudcars]

I'm very glad you enjoyed it Warren and that it brought back some good memories. I obviously love the truck, but I also really enjoy connecting with folks & hearing their thoughts & memories. Driving that old truck (I assume it was a 3 on the tree) would likely have not been as thrilling then as the memory is now. Meanwhile I'll try to share other adventures that are easier on your back to watch than to experience. Always family friendly, and hopefully entertaining. Planning to do some more videos of it after winter is over and the tires are changed & brakes gone over. Planning to get some more footage of shifting & messing with the gears to answer questions like what happens when both are in reverse. So stay tuned and I'll do my best to keep you entertained. Posted another blowing up a beaver dam a couple weeks ago. Music on your profile picture: who's your favorites? Mine Mark Knopfler.

[@CoryR0691]

Nothing like the sound of a Detroit Diesel 👍🏼

[@lovesloudcars]

Oh yeah! Isn't that the truth hey? Glad you enjoyed the video. Still gonna make some more footage of shifting and exploring things like what happens when both transmissions are in reverse. Stay tuned for further nonsense and entertainment my friend.

[@dnovello]

Sounds absolutely sublime!! Looks like she came from the factory; the build is that good! What's the top speed in forward, on this Treasure?

[@keepontruckinman4688]

28.5 miles an hour

[@calebkey2050]

keep on truckin Man Lol you’re probably not too far off Back on topic though, theoretically because of the way the transmission(s) work on this truck, I would think it would have the same top speed capabilities in forward and reverse. With that being said, a 3-53 won’t exactly be a barn burner, but goddamn it will sure clean all of those tree stumps out of your yard RIGHT now.

[@dnovello]

@@calebkey2050 Thanks!

[@lovesloudcars]

Not exactly sure should be 60-70? Tons of views on this and part 1, maybe I'll make a part 3 to show a bit more like shifting and speed once the tires are replaced.

[@SYH653]

Let's see...assuming the "economy" rear end for 1-tons (4.57:1) and 32" tires, with the aux & main transmissions in 4th, cruising speed at 2500RPM is 52MPH. SM420 ratios (according to my '67 dealer data book) are: 7.02:1 1st 3.56:1 2nd 1.71:1 3rd direct 4th 6.78:1 reverse So in a O/D configuration they'd be: direct 4th 0.58:1 3rd 0.28:1 2nd 0.14:1 1st 0.15:1 reverse That makes top forward speed in each O/D gear (assuming all other variables are unchanged): 52MPH 4th 89MPH 3rd (!) 186MPH 2nd (!!!) 367MPH 1st (!!!!!!!) That'd be a quick trip to Vancouver Island!

[@bps4086]

Awesome! Literally just finished watching the other video of this beast, great video

[@lovesloudcars]

Glad you liked them both. Tons of views and questions on this and part 1, maybe I'll make a part 3 to show a bit more

[@barnycanuck6234]

Far out. Don’t know why Chevy didn’t build it this way to begin with

[@calvinevans8305]

Too many high speed reverse drag race fatalities.

[@oe542]

It’s pretty obvious isn’t it?

[@lovesloudcars]

pretty much!!

[@lovesloudcars]

that made me laugh!! gold.

[@oe542]

Joey Balas no they didn’t.

The world best Driver ed Vehicle complete with instructor ....OH YEAH !

[@lovesloudcars]

Shall I give a few more instructions? - hopefully my comments & sense of humor are not too crazy for the viewer's enjoyment...

[@RickyMyers-g9m]

That old horse is the coolest! ...I love it!🐎🐎✅️✅️💯💯💯💯💯⭐️⭐️⭐️⭐️⭐️

[@lovesloudcars]

Isn't it though?? Not exactly Jay Leno collection stuff, but all there! Glad you enjoyed it. Got some new tires and rims this fall hopefully we'll get some more footage of shifting and exploring things like what happens when both transmissions are in reverse. Stay tuned for further nonsense and entertainment my friend.

[@JDWard-Jeepster]

Love the screamin Jimmys.

[@lovesloudcars]

Me too James! Part 1 shows it better plus explains the truck more. Lots of questions & comments, I'll maybe have to make part 3.

[@mykee426]

I've always wanted an Apache. They are very hard to come by. Especially in that shape still.

[@colincamus2098]

Shit, there's a guy with 5+ in his lot around the corner from me.

[@HubertofLiege]

Colin Camus where are you?

[@keepontruckinman4688]

@@HubertofLiege he's in the north pole

[@lovesloudcars]

well Colin let me know when he wants to get rid of them...

[@lovesloudcars]

Bighorn 44 if you need to clear out the yard let me know. - BUT DON"T TELL MY WIFE

[@Charley_Buehner]

Put the rear trans in Reverse and run the front 1 through 4, so high gear is synchronized? Run both sticks in reverse for a super-low-granny mode? (Not sure why you'd want that beyond testing the torque limitations of the driveshafts and axles... LOL

[@JT-SE-OHIO]

Wouldn't reverse plus reverse equal forward?

[@calvinevans8305]

Mind blown

[@Charley_Buehner]

@@JT-SE-OHIO Yes, exactly - a super-low granny-gear - perfect for that modern "In My Feelings" challenge, where you can get out of the truck and film yourself dancing alongside of it, with a cane and walker, get five shots at taking the video, and still not get out of the garage :-D

[@lovesloudcars]

That's funny. I'm not sure you are right though. First in front & reverse in back should be super low reverse? reverse in both should be same as direct forward. Will have to put out a # 3 it looks like. Tons of comments & questions on this video as well as part 1.

[@Charley_Buehner]

@@lovesloudcars My initial comment was suggesting two different scenarios (not sure if that got confused or not) - Assuming both transmissions are the same, it should make no difference which box is in reverse, for the end result to be the same -- except that if the rear box is reversed, you won't be shifting "backwards" 4th-through-1st, you'll be running the front through the gears 1-through-4 normally - the difference being that 4th is a synchro'd gear, so no playing with clutch and cramming the stick trying to keep from grinding. The "both sticks in reverse" was a different concept, a very heavily gear-reductioned forward gear (I know that's not a word... "gear-reduced" just didn't seem to fit the sentence very well LOL)

[@shiddy.]

Man, that truck is awesome ... But you already know that

[@lovesloudcars]

But I also love that other people can enjoy it too. Thanks for the compliment and checking it out Cheese Chisel. Planning to record some more footage of it messing around with things like what happens when both are in reverse and showing some more shifting and such. Stay tuned and thanks for watching & your comments. Also Merry Christmas!

[@MrTheHillfolk]

Hah, I'm seriously imagining that if I won the lottery, I'd probably get something like this first and get the obligatory Lamborghini later. No rush they've got plenty of those out there.

[@lovesloudcars]

@@MrTheHillfolk Exactly.. Like my Dad always said; "they've got so many in town they're selling them". Can't buy one of these there...

[@yelyab1]

My son has some friends that live in the upper peninsula of Michigan which I is really a part of Ontario. They talk the same, build specialized cars and trucks the same, live 20 miles past the end of the map. His friends were into off road racing. They build a 2 transmission Subaru Brat. Half car half pick up. They did not turn #2 trans around. They wanted reduction. They had creeper gears that could climb trees. They talked just like Red Green. My son was up there going to Michigan Tech to become an engineer. I went there for 2 years to avoid an all expenses paid, one year vacation to sunny Vietnam. Still go there in the summer for a refresher course in how life is suppose to be lived. My son’s professors drove snow machines to work starting in late November early December. They had to cross a 1/4 mile section of open shipping cancel that didn’t freeze until January. Oh yeah, you just screw it open, hit about 60 and it will go as far as you want on open water, no problem. Crazy world north of the 45th parallel. Must be dem nordern lights! Like your style. Never move down into the madness. It will F you up!

[@lovesloudcars]

Maybe it is the northern lights after all. Good memories and good advice. I've never been real fond of the winter cold, but yet here I still am. The Subaru guys, I've heard of people doing that too. Sometimes I think you have to think a little outside the box and dare to try. Thanks again for your comments, that's one of the things I enjoy about this is connecting with other people wherever they are.

[@plumbingstuffinoregon2471]

"If the women don't find you handsome, they should at least find you handy" Seriously that auxiliary transmission is amazing. I gotta figure out how to do that myself!

[@lovesloudcars]

Go for It! Mostly I think I takes a bit of nerve more than anything. Let me know when you get it done!

[@plumbingstuffinoregon2471]

@@lovesloudcars I'll definitely think on it. Wouldn't be for a while though. I've got to many other things going on right now, and I'm about to get into trucking.

[@jeffgarrett2114]

Sounds like an old timberjack lol

[@edgriswold3796]

Lol that's what I was thinking too

[@lovesloudcars]

Exactly. - different smell because not the same twigs & crap stuck everywhere.... Among all my crap I have a 60's Franklin with a 353 & a Timberjack with a 453

[@HubertofLiege]

“There, now I don have to shoat “

[@lovesloudcars]

You know it! Hope you enjoyed it. Will have to put out a # 3 it looks like. Tons of comments & questions on this video as well as part 1.

[@sleepingwiththedog]

You know when your looking at a fantastic job, 10 years later it runs and drives as good as the day you built it. ERk409 said something about Canadians being like Americans, well, maybe in 1920s to 1950s, Canadians have pride and dignity, and on display on this video is class, no swearing, no ridiculous comments, no baggy pants at his knees, simply a guy whos a straight shooter. We go up into Nanticoke to pick up argon, and on the way pass many, many farms, farms in great condition, lawn mowed, nothing out of place, theres alot of pride in Canada, I wish we had as much here in the states. Great video, enjoyed the Detroit, another good noise comes from the 238 in a aingle axle, drove one with a 13sp in a cabover it was an old 4070 International, boy did that sound cool. Would love to fund old cabover 8v92 to build and play with, Detroits are the best.

[@lovesloudcars]

Thanks Sleeping! It's been more than 10 years too- closer to 25-30 and she's running just fine!- so I guess I'm getting old. Parts of my yard are looking good, - others not so much, but I think you are right. As for video content I appreciate your comments. I like to share stuff that I hope are entertaining & just different than what most folks see. Keeping git family friendly for viewers is a goal for sure, I don't need any of that other stuff in my life either. Always loved the sound of a Detroit engine, have several more out back in various stages of life. I've even got a 353 that's rebuilt & kept in a shed since 1984, still don't know what to do with it, (like saving a candy so you still have it) Hope you check out the other videos I've posted & find further enjoyment.

[@fruitfarmfords8243]

You need to look up zip ties n bias plies

[@michaelhill7471]

Thank you for taking us on the ride. What a treasure it is indeed!

[@lovesloudcars]

Thanks Michael. I'm glad you liked it. Part 1 showing how it was put together might be interesting to you. Either way, stay tuned for further nonsense and entertainment my friend. I'm planning to get more videos of it including shifting and exploring things like what happens when both transmissions are in reverse.

[@ryansaunders1188]

I bet that thing is fairly fuel efficient. Did you ever measure it?

[@Hanzyscure]

Fuel inefficiency and couldn't meet smog emissions limits is what killed it. A very reliable and great sounding engine.

[@Wingnut353]

@@Hanzyscure Diesels are not fuel inefficient... it also has very large cyclinders comapred to modern engines, which means tends toward more efficiency. It's basically a 2.7L 3 cylinder. Achates power has a modern take on this engine design by eliminating the head (basically 2 half size 353 detroits bolted to each other with an injector on the side.... electronic controls and in a ford F-150 it got about 37mpg... and had emissions good enough to meet next gen standards. kzbin.info/www/bejne/q6TQkqh8nsyjsM0 even a plain jain 353 in a pickup ought to get around 20mpg with the right gearing (3.08 or similar) and a turbo.

[@Hanzyscure]

@@tripplefives1402 30 plus mpg ? I don't believe that . A 4 stroke diesel might be 30% more efficient than a gas engine. A 2 stroke is not.

[@broshak9384]

@@tripplefives1402 diesels are way more efficient. They don't use any gas..... I had to say it

[@broshak9384]

@@tripplefives1402 well then...that went straight from a joke to science real quick lol

[@loganr3884]

WhistlinDiesel would be all over this

[@StarHunter28]

Don't let him anywhere near this gem

[@nom8er]

@@StarHunter28 You beat me to it!

[@lovesloudcars]

Sounds like Warren, Star Hunter & nom8er have an opinion about Whistlin. I'm not familiar, ( haven't had a TV channel turned on in our hies for about 20 years) Videos & you tube yes. Either way Logan & others I hope you enjoyed it. Will have to put out a # 3 it looks like. Tons of comments & questions on this video as well as part 1.

[@jasonhill3653]

What's top speed in forward? Sorry if you mentioned it i missed it and i know top speed would be a bad idea with those tires

[@rp1645]

Jason I think he said 60 MPH.

[@jasonhill3653]

👌🏼

[@lovesloudcars]

RP's right- though I never did clock it for top capable. Between this video & part 1 walk around & explanation I've been swamped with questions & comments. Will have to make a part 3 showing a bit more I guess. new tires & bleed the brakes & see what it will actually do.

[@mkollander99]

Absolutely a beautiful truck built with love

[@lovesloudcars]

Yes Thanks MK. From all the questions & comments from this video as well as the part 1 showing everything in the walk around, I'm going to have to make a part 3 at least to show the gears & shifting & speeds a bit better for sure.

[@TwinStix]

Neat old truck ... nothing better than twinsticks behind an old diesel 👍

[@lovesloudcars]

You got that right! I wish I had a few smaller auxiliary transmissions now. I'd use one asap on my work truck.

[@dorandouglas]

With that blue smoke, I am guessing your DEF level is low. ;)

[@lovesloudcars]

Been SOOO swamped with comments it's crazy. I wondered when I'd find yours. She needs a good run t clean things up a bit.. DEF- can you imagine?? I wish I could come up with a good anachronism for that crap.

[@dorandouglas]

@@lovesloudcars I decided to give Google a shot, and I found this: demanddetroit.com/parts-service/detroit-genuine-parts-program/aftertreament-support/

[@dorandouglas]

It looks like you can add a DEF system to your engine if you want. What an age we live in ;)

[@RobertValinsky]

That truck is amazing!! I like the the way it has a two transmission set up and the sound of the engine is wonderful.

[@lovesloudcars]

Thanks Robert it really is a cool truck in my opinion too. Got some new rims and tires last fall, so hopefully I'll have a chance to get some more footage of shifting and exploring things like what happens when both transmissions are in reverse. Stay tuned for further nonsense and entertainment my friend and thanks for watching and for your comment.

[@jessel961]

I would drive this instead of tank. My drill rig had a 353 Detroit. We called it Damion. Only one thing in the world sounds like that and 59 Chevy. Goosebumps!!

[@lovesloudcars]

I'm glad you liked it Jesse. I feel the same way, it's s beautiful looking truck, I think the 58 and 59 are the best looking truck Chevy ever made. Add to that the melody of a 353 Detroit engine an extra transmission and voila- a thing of beauty. Planning to record some more footage of shifting and exploring things like what happens when both transmissions are in reverse. Part 1 ( if you haven't seen it) shows how it was put together. Stay tuned for further nonsense and entertainment my friend.

[@patrickbachman2184]

After watching the first video,I had to see the second. That thing is a beast. When you hear the pipes from outside, I instantly think of the film ‘Maximum Overdrive’.

[@lovesloudcars]

I've never seen it before. Will have to check it out. My kids are watching super girl I'm assuming I'd prefer Maximum Overdrive. Stay tuned my friend and thanks for watching and for your comments.

[@patrickbachman2184]

@@lovesloudcars ,Sound track is AC/DC…get the popcorn and cold snacks ready!

[@KarimTroost]

What a great classic truck. Give me his truck over an EV any day. New paint and some new wheels and tires, your ready to go.

[@lovesloudcars]

100%!! Picked up some new rubber and rims last winter. Hopefully we'll get a chance to record some more footage of shifting and exploring things like what happens when both transmissions are in reverse. Stay tuned my friend.

[@davidchapman1519]

Real trucks are built not bought!!!!!!!!!!! Love it!!!!!

[@lovesloudcars]

I love that phrase! True enough though. Nowadays everything is basically disposable. I don't mind driving new, but way too much electronic crap on them these days. I've always wished a guy could just do builds. All types of needs and preferences. Milage, power, engine choice... could spend a lifetime even with unlimited funds.. Planning to record some more footage of shifting and exploring things like what happens when both are in reverse. Stay tuned!

[@markstegeman4337]

Going 60 in reverse is insane love that truck

[@lovesloudcars]

It's LONG past the "comfortable passenger" stage I can assure you. When the driver starts to loose his nerve everyone else was worried a long time ago. It's a fun truck for sure glad you enjoyed it. Stay tuned for further nonsense and entertainment my friend. Hoping to record some more footage of shifting and exploring things like what happens when both are in reverse.

[@markstegeman4337]

I did say I love the truck how you did it was insec

[@lovesloudcars]

@@markstegeman4337 I love it too. To me it's got all the perfect things to like. 59 and 58 were the best looking truck Chevy ever made I think. Add in Detroit Diesel and extra transmission and wow! I'd love to find materials to build a bunch of copies.

[@davidjenkins1958]

Only one thing that could make her sound better, JAKE BRAKE !!!!! Great old truck guys.

[@lovesloudcars]

Oh David you are a man after my own heart.

[@yelyab1]

These guys are having way too much fun.

[@lovesloudcars]

Ah Greg you know that can't be true! It's just like saying too much horsepower or too fast of a race car! It was an enjoyable day though. I was pleasantly surprised that part 1 showing how it was put together, and looking forward to making a few more videos of it. Stay tuned & stay warm!

[@theblackdahlia64]

Gives a new meaning to double clutching

[@lovesloudcars]

I guess it could!! Hope you enjoyed the video. I showed some of how it's set up on part 1, but will definitely have to post more yet.

[@upnorthyooper1196]

A couple of old farm boys playing with toys from their youth, how cool is that. I bet there is an apple pie cooling on the kitchen window cell.

[@lovesloudcars]

Pretty much hey? Was a good day. Was there last night visiting. Need to crank out a few more videos of this gem. Exploring things like what happens when both transmissions are in reverse and such things. Stay tuned for further nonsense and entertainment my friend and thanks for watching and for your comment. Time for pie!

[@isaac4273]

Gosh I never get tired of the sound of those Detroit diesels, baby that truck man, you got one amazing ride

[@lovesloudcars]

Thanks Isaac. it's a fun truck for sure. Hoping to record some more video of more shifting, maybe drone footage following it while accelerating and exploring things like what happens when both are in reverse. Stay tuned!

[@rando.name.]

Beautiful truck and gorgeous countryside

[@lovesloudcars]

Thanks Michael. I agree on both points. - in the summer time at least, the winter I'm not so fond of.. Will be trying to post a bit more about it as time goes by.

[@steamgent4592]

I would so love to have this truck what a beauty and perfect specs.

[@lovesloudcars]

Thanks SteamGent. I'm glad you enjoyed it. Part 1 shows a little more about how I put it together (if you haven't seen it already). Either way. I think 58 and 59 were the best looking truck Chevy ever made. Add in a Detroit engine & it's all noise and beauty! Thanks for watching and for your comment. Stay tuned for further nonsense and entertainment my friend.

[@ericwakefield4977]

that is the absolute coolest thing ever and what a unique custom piece, looks so original and authentic, yet with amazing powertrain ingenuity with that old diesel and brownie box setup, and man how sweet is that to have it in the family for 45 + years! that is sick! great video!

[@lovesloudcars]

Thanks Eric! It is a cool truck hey? I'm not sure if you watched part 1 showing how it was put together? Planning to record some more footage of shifting and exploring things like what happens when both transmissions are in reverse. Keep watching my friend and I'll do my best to keep you entertained!

[@southernauto2752]

Definitely need some more videos of this old truck

[@lovesloudcars]

@@southernauto2752 100% he got new tires and rims on it this summer. Need to go through the brakes and give it a good run. Exploring things like what happens when both transmissions are in reverse and more shifting. Stay tuned for more content my friend and thanks for watching.

[@brianlayaou9447]

Absolutely a wonderful old truck. It's got oodles of character, betcha it hauls anything you can hook to it or put on it.

[@lovesloudcars]

Pretty much Brian. Once many years ago we were hauling oversized hay bales on a trailer with a different pickup until we bent the frame because it was overloaded, so switched to this one. I was worried because after the switch, he put two extra on the trailer and one in the back of the box for traction. When I got off the field and checked, it wasn't even onto the overload springs yet!! It's a fun truck for sure, and will be making some more videos on it to show better footage of several things. Stay tuned, hopefully I'll get to it this summer yet

[@tjsna5]

That is the coolest old school truck I have seen. Thank You for sharing this with us. Being born in 61 I should have seen one before this.

[@lovesloudcars]

I've always thought these were the best looking 50's trucks with the dual headlights. Glad you liked it. Although being born in 61 I doubt you were watching for that model for the first few years of the 60's! Hoping to record some more video of more shifting, maybe drone footage following it while accelerating and exploring things like what happens when both are in reverse. Stay tuned!

[@waynedub1167]

Thank you for sharing.

[@lovesloudcars]

My pleasure Wayne!

[@randallkelley3600]

That truck will outlive us all.

[@lovesloudcars]

Probably so hey? 61 years old now & looking better than the new ones and pretty well anything older. Tough to kill well built & real. I'm planning to record some more in the spring, like more shifting, maybe some drone footage & exploring what happens when both are in reverse, so stay tuned! Meanwhile other things like blowing up beaver dams, and less exciting weekly adventures.

[@carlwilliams1570]

Ran a bunch of Detroit’s on logging equipment and trucks,have to hearing damage to prove it! 353,453,471,671 some silver series with turbos. We ran a 353 T in a knuckle boom loader and it turned 2500 rpm to get enough flow out of the pumps. Don’t be afraid to let it wind up. They can do it for thousands of hours! Your old 1 ton is probably geared pretty low. Neat old truck!

[@lovesloudcars]

Thanks Carl! They didn't get the nickname Screaming Jimmies for nothing! I have a bunch of them in various stages between rebuilt and looking for a home to " not sure if it runs". Figure I'll make a video of them all just for kicks. Glad you enjoyed the truck. It's my favorite looking Chevy model. Stay tuned for further nonsense and entertainment my friend.

[@HODGEPODGEDODGEGARAGE]

I'm a Dodge guy but I would *love* to have that truck! Old school ingenuity never ceases to amaze me! 🙂👍

[@lovesloudcars]

Thanks Man! Keep the MOPAR going!

[@young11984]

Sounds better than 95% of the trucks these days, ole Detroits have always been my favorite and can tell what they are miles away where i live. Would love to find and install a 453T in my 79 F150 but they are as rare as hens teeth and more expensive than mule dentures around my area.

[@lovesloudcars]

you have a 451? or a 453? Not many 451's around. I've only seen videos of them. missed out on a ( should not have) 353 this week. - not sure if it ran or anything for 200$

[@young11984]

lovesloudcars only GM/Detroit i have is a 371 in a mid/late 40s Allis Chalmers HD7 track tractor thats been seized for 40yrs. I would be happy with any 3-471s for $200 and somewhat close by

[@MimicoBungalow]

MAN the 'ol Detroit sounds GOOD...I wonder why nobody else ever did this - maybe with newer trucks? This COULD be such a great SHOW TRUCK, guys! I know you're HONEST farmin' lads - but bring this to a few local shows! Let more people see/hear it! (a fan in Toronto who hasn't been to Alberta in years!)

[@lovesloudcars]

There's too much disposable junk these days. I'd like to spend some time driving it and make more videos but keep getting distracted with the million other projects and life. I bought another 59 Apache pickup last year and have another engine. Could build a 4x4 version! I need to quit my job and play full time!

[@samuelvasquez8927]

Sounds like an old Greyhound bus. Excellent.

[@lovesloudcars]

Yes. There's just something about the sound of a Detroit engine hey? I plan on recording some more videos of it to explore things like what happens when both transmissions are in reverse. Stay tuned my friend.

[@timothycarpenter4428]

She sounds BEAUTIFUL!

[@lovesloudcars]

Thanks Timothy. It does sound great hey? I always enjoy the sound of a Detroit engine , especially this one! I'm planning on recording a few more to show more shifting and such things like what happens when both are in reverse Stay tuned!

[@rosshemming1347]

Best truck ever thanks from hemming towing

[@lovesloudcars]

Thanks Ross! I am partial to it myself but there's been a ton of people who seem to agree. Tons of comments & questions on this video and part 1 showing the walk around. I think I'll have to make at least a part 3

[@whydahell3816]

Man that thing is purring like a rhinoceros!!! If you get some tracks on it you'd pull down a house! Great truck she sounds goooooood! Frm New Orleans Louisiana

[@lovesloudcars]

Thank you ! I'm glad so many people love it as much as I do.

[@sgtyork9330]

I've had my 57 3154 Chevy 4x4 since I was 17. I'm 59 now. It has the factory installed Napco 4x4 set-up. Currently running a .030 over 350 with a Duntov cam and Fuelie heads.

[@lovesloudcars]

Now that is super cool! Not many get to hang on to their vehicle like that. Tons of comments & questions on this video, will have to make a part 3 I guess. Did you also see part 1?

[@TheBigford460]

That is absolutely one of the coolest trucks.

[@lovesloudcars]

Thanks Travis. Coming from a guy with a Ford tattoo on his forearm that's quite a compliment. I have always loved Detroit engines and this seemed like a good fit. Hoping to record some more driving, shifting and messing around footage. Hopefully drone and drive by as well as exploring things like what happens when both are in reverse. Stay tuned and stay safe!

[@TheBigford460]

@@lovesloudcars I have always liked the 2 stroke screaming Jimmy’s. The engineering is impressive. True have the Ford tattoo! But i like anything different or unusual.

[@lovesloudcars]

@@TheBigford460 Right on! I'm with you on the Detroit engines. I've been around them my whole life & always listening for one wherever I am. My brother ( long story cut WAY short) on a drilling rig once had a pair of Detroits on pumps. oil changes between crew change ended up one never got new oil & fired up & ran until it seized up. They decided to pretend it wasn't them, filled it with oil & finished the shift with one engine. crew change happened again & the next crew discovered it shut off, checked the fluids & fired it up & ran straight on through. It ended up lasting longer than the other one! I try to watch for and post anything different & unusual. Hopefully I'll keep you entertained now and then. Stay safe!

[@TheBigford460]

@@lovesloudcars A old buddy of mine said they had a old lumber delivery truck with the 300 six in it and hated it so drained the oil in it on a Friday and ran it till it locked up put the oil back in it. On Monday he came in and asked what happened to the delivery truck thinking it had been hauled off. They told him its out on a delivery! Haha. Cant kill them.

[@lovesloudcars]

@@TheBigford460 That's funny. Sometimes a guy got lucky, but if it happened accidentally you'd be out of luck... Bad engine story from my uncle. He knew a guy on the west coast who decided to swap out his tired motor with a good runner one night. Crazy part was he was a thief, and swapped his in a power companies yard. Parked beside a pickup with same engine, proceeded to steal the good company engine & into his truck & was just finishing up the swap to put the tired engine back into the other vehicle so they'd never realize they'd been "had"- when a cop pulled in & asked what he was up to? He gave him a story about" these stupid people who are in a panic to have it worked on and ready for morning".. The officer stayed & visited & helped out for a few minutes & went on his way. CRAZY! Since the company truck was still running, nobody probably ever knew. I'm against stealing & have zero patience for that type of behavior, but it's still a funny story.