In this video I install a set of adjustable lowering links to lower my Tesla Plaid. www.signaturewheel.com Use Code: dragtimes5 over at secretev.com/products/n2itive... #tesla #plaid #diy
Пікірлер: 259
@gregmatson14702 жыл бұрын
It's amazing what a nice set of wheels, some tint and a slight drop will do for a car. Most people who "customize" their cars should stop there. Beyond that, you are on the expressway to KlownKar town.
@danburkland2 жыл бұрын
Couldn’t agree more!
@knroo-j14872 жыл бұрын
Absolutely agree. Subtly keeps it tasteful.
@stakddeck84522 жыл бұрын
It's all about personal preference.
@350z33hr2 жыл бұрын
To each their own right 🤡🤡
@Yocannon2 жыл бұрын
Most people should worry about there own cars. We would be better off
@Matt.e_Black2 жыл бұрын
Lookin good! I lowered my Plaid as well and have the same wheels but in 21”. You’re correct, DSM and cheetuh stance work, the dash just never says “ready to launch”, but you’re still getting all the same effects
@im4udevco2 жыл бұрын
Just like that. That Red Plaid looks gorgeous and pops. Very nice ride.
@carloschaqui82342 жыл бұрын
Whole car looks awesome… great wheel/drop set up!
@SlanSellsCars2 жыл бұрын
I still haven’t recovered from your Tesla vs Porsche 911 turbo drag race. When the Tesla beat the turbo, I was in shock.
@DragTimes2 жыл бұрын
wait till you see it race my Huracan....
@nicholassmith70482 жыл бұрын
The right stance is so important and this thing has perfect stance now. Teslas from the factory look a bit dorky but it's amazing what a few subtle improvements do to turn them into good looking cars.
@stuarts46732 жыл бұрын
That looks amazing, Lowerd and a nice set of wheels does the job
@justsomeguy64742 жыл бұрын
Looks sharp Brooks!!
@HellcatDreaminJosh2 жыл бұрын
Dragtimes Great Video I think it's awesome that you got some intuitive Suspension links for your Tesla Model S Plaid and I can't wait to see more racing content
@akira28shima322 жыл бұрын
Love it!! The Plaid’s all silent cash, no noisy flash!!
@jasonbrenfro2 жыл бұрын
Very nice! Thank you for this!
@RidgesPhoto2 жыл бұрын
Looks great. I've got signature rims on my Y and they are awesome!!
@Squidgy552 жыл бұрын
Bro, I'm not much into EV's but that looks frigging dope. 👏
@TheFrenchMC2 жыл бұрын
Until you drive a performance model Tesla 😳
@igortchelzoff37362 жыл бұрын
@@TheFrenchMC Not this kind of a deal. I was more impressed with the CT5V BW manual
@dennissmith72142 жыл бұрын
@@TheFrenchMC Or any EV, a 300hp EV feels and accelerates much faster than a the same hp ice vehicle! 🤷🏽♂️
@evaristocorripio54342 жыл бұрын
@@dennissmith7214 that doesnt mean its a better, or more fun of a car
@ThisaraGamalath2 жыл бұрын
@@dennissmith7214 so true, i've experienced this many times
@sorka950322 жыл бұрын
I 3d printed my own for my P85D and have have been running them the last 70K miles. Obviously you need to align the car as lowering will increase negative camber and toe. You'll probably need adjustable upper arms. That said, the plaid control arms are no longer fastened to the cradle with tabs but rather bolted laterally into the cradle which means that reducing negative camber should be as simple as a properly designed shim. Be warned, if you bring your Plaid to Tesla for any suspension related work which includes replacing the main battery, they will do a ride height calibration and if you have the lowering links on, your car will now rise to stock height WITH the lowering links. Conversely, with Toolbox, if you can get your hands on a copy, you can do the ride height calibration yourself and LIE about the height to lower the car WITH the stock links. The best reason to lower the car an inch is to save your cv/half shafts from bending the ball channels since the stock height exceeds the max angle design limits of that joint which is why so many have acceleration vibration issues from those shafts. It's the reason I lowered mine. After 4 sets of half shaft replacements, the problem never returned after I lowered it an inch.
@1996killerman2 жыл бұрын
damn this is actually very interesting. I wonder if other plaid owners could touch on this subject.
@jonathanviventi13802 жыл бұрын
Now we need to talk about getting a hold of the Toolbox software... :-)
@drrightwing44352 жыл бұрын
4 sets of half shafts? My god, how much did that cost? With Tesla astronomical repair pricing, that had to be ridiculous
@sorka950322 жыл бұрын
@@drrightwing4435 Warranty although the few I've seen pay for it out of warranty were in the $2K range a pair installed.
@rajvo7406 Жыл бұрын
Tesla says then can't do alignment because of those links..
@bennyvazquez35472 жыл бұрын
🔥🔥🔥 looking good bro
@Manustars12342 жыл бұрын
It looks awesome brother
@eddieair232 жыл бұрын
Looks Awesome!!!
@royrauch97752 жыл бұрын
Great information. Brooks!
@MacGyver19082 жыл бұрын
Wow, it looks sick now! 🤜🤛
@zacjohnson84049 ай бұрын
looks ridiculously cool
@michaelschneider5302 жыл бұрын
Love the video as always! Will you be at tx2k this year??
@tomrynkewicz76742 жыл бұрын
Car looks great! Great video as well.
@ericship83832 жыл бұрын
Just because you can’t afford a huracan evo doesn’t mean it’s overpriced the tesla is overpriced since it gets beaten by cars around the track for half or a quarter of the price so
@tomrynkewicz76742 жыл бұрын
@@ericship8383 track track track.....how many times in every day driving do you take your hurracan to the "track"? It IS over priced when a guy and his wife and 2 kids in the back seats along with groceries in the trunk embarrasses you on every day streets and real world daily usage at hundreds of thousands of dollars less. Simple math right there.
@r.o78972 жыл бұрын
I love it!
@butlerweldingfabrication72092 жыл бұрын
very cool man. I must admit I thought this video was going to suck. but electric is the future and I'm here to learn. this reminds me of being a ford master tech back in 1996-1998 at the ford Lincoln mercury dealership in PA. the Lincolns had air suspension they would raise or lower based of load( self leveling). that sensor arm adjuster and sensor is basically the same as what they used. however, however, when the air compressor went bad the system did not work or took forever to fill the air bags. then the over time the air bags would leak, YIKES !!!! back then at the dealership they the parts were costly $$$$$. and YES, TESLA SUPERFANS THROW ROCK AT ME ,I know I know its a tesla they never break, they don't need any maintenance ever. but yeah when the customers came into the dealership for service we use to take soapy water and spray around the all of the air suspension component to test for leaks, the lines and the bags. so ,so ,so what I'm just some old bozo grease monkey , anyways that's my 2 cents 1+1=2. great video man liked and subbed...
@Deuuuce2 жыл бұрын
That’s pretty cool. Very minor, but curious to know aero efficiency gain for range and even trap speed.
@jameshunt37652 жыл бұрын
brooks would love to see more SF90 content! thanks for all the great content!
@MyFirstYoutubeHandle8 ай бұрын
I put a version of these on my 2014 MS P85D. The front wheels didn’t need to come off in that model. I know the Plaid has a different set up. But my point is, super easy to install and worth every penny.
@mega1330 Жыл бұрын
Looking Gooood! Quick question! What kinda trunk spoiler lip is it?
@markremington80002 жыл бұрын
Perfect ride height imo...
@rustler082 жыл бұрын
Did you actually lose trap speed and ET with that wheel/tire combo? Has it picked back up to, or over, factory levels?
@DrDsIT2 жыл бұрын
@DragTimes do you have enough miles on the Plaid to tell if it has the inner tire wear issue that the older Model S and X have? I'm considering purchasing the N2itive camber kit when I can confirm that it will eliminate the inner tire wear issue after a new set of tires wears down.
@bosoares2 жыл бұрын
Looks great.
@KleiberM2 жыл бұрын
Mannnn your Plaid is too clean 🧼
@TC-V82 жыл бұрын
Be interesting to see how it effects your suspension geometry?
@racingmafia12 жыл бұрын
Have you measured camber after the change?
@jonathanviventi13802 жыл бұрын
It gives you too much negative camber, causing the inside of the tires to wear. You'll probably need to get an alignment after lowering the car to fix it. Some additional parts may be required to get the camber back into spec while it is lowered.
@racingmafia12 жыл бұрын
@@jonathanviventi1380 unfortunately, the rears, that already suffer from transient high negative camber, don’t have any camber adjustment. My 16 S was always in low mode, but chewed through tires so fast, I now ride in normal mode. Bad suspension design for lowered car. Maybe there are adjustable components available.
@jonathanviventi13802 жыл бұрын
@@racingmafia1 my 2016 s p90DL didn't wear tires unevenly, but I always drove in normal mode.
@TC-V82 жыл бұрын
@@jonathanviventi1380 I'm fairly sure the new model s has new/different suspension all round, including more adjustability.
@ttppro19852 жыл бұрын
Man ur garage is a dream
@pinnacleperformance6202 жыл бұрын
Does the added tire width or larger overall diameter have adverse effects on range or acceleration?
@gtr4852 жыл бұрын
Looks good
@frankdavis94582 жыл бұрын
@DragTimes what jack pads are you using for the model s
@friesiboy________21282 жыл бұрын
How low? Brooks: yes
@InternetDude2 жыл бұрын
Why didn’t you use a tape measure to show the actual drop?
@benthecaptain74192 жыл бұрын
Wow that's a dramatic change for such low cost and easy install. I should see if they have that for the P3D.
@IReahpZz2 жыл бұрын
P3d doesn't have air suspension. This has been around for the model s for years
@alexhullar4805 Жыл бұрын
What is the tint darkness on your car? Are they 20% all around? It's gorgeous
@armandopatane53432 жыл бұрын
Beautiful cars BROOKS
@UNIT-6262 жыл бұрын
since you got the smaller diameter wheels did your range increase ? there is supposed to be a 48 mile difference in range from the 19" to the 21", was there a setting for the 20's with better range than the 21's?
@bobqzzi2 жыл бұрын
1. Love this channel 2. That is a clever way to lower a car (although crazy overpriced) 3. Lowering cars is generally a terrible idea without altering the geometry That includes this one too.
@DragTimes2 жыл бұрын
$350 is over priced?
@bobqzzi2 жыл бұрын
@@DragTimes They are cleverly designed, but yeah- it's 4 links with some markings on them. I guess given the market (very expensive , low volume car) they can get away with it so more power to them.
@DriveBoatRide2 жыл бұрын
Truly looks so clean and perfect! Glad your still enjoying the Plaid! Take care from the @driveboatride crew!
@kbalaji912 жыл бұрын
Need to see if any change happens in quarter mile times..
@ronitroengine2 жыл бұрын
Good afternoon !!! I would like to know where I can find a kit like this for my Plaid? I participate in launch tests but it takes a long time for the dragstrip mode to lower the car and get ready… Here, reaction time counts!! could you help me to improve this time of preparation for the launch ? thank you for your attention.
@DescartesRenegade2 жыл бұрын
Can the wheel still turn without scraping when in drag mode?
@jpscharged2 жыл бұрын
Does it still launch as good? I would figure lowering would negatively impact weight transfer.
@L3uX2 жыл бұрын
Also want to know how it affects grip eg more neg camber.
@asterix2ksi6 ай бұрын
How are the tires holding up after lowering? Do anything to address rear wheel camber?
@davidd16212 жыл бұрын
What tires and wheels are you rocking?
@johndavis45642 жыл бұрын
Def Looks great..So does cheetah mode happen anymore? Curious to see some times.
@Davo1982 жыл бұрын
Which colour are those wheels? Awesome wheels btw
@JayJay-ym5jx2 жыл бұрын
@dragtimes what do you do for a living?
@pssita2 жыл бұрын
Looks sick. At first I thought you had a TLX Type S. ILX…
@DragTimes2 жыл бұрын
My sons car... type A
@rubencastano67712 жыл бұрын
Will this affect the launch mode? (Cheeta mode)?
@Chuck88vert2 жыл бұрын
Dam I like those wheels
@dporrasxtremeLS32 жыл бұрын
Brooks, would you consider color matching your door handles as well as your side marker/cameras? The stock setup almost looks like an add on. Your S looks Great!
@TB-vb3ov Жыл бұрын
Seriously lol dude. Looks better as is. Please no. Lol
@larryc16162 жыл бұрын
Does the lighter wheels and drop in height help with drag racing or is the software holding it back? i saw chet drop 700lbs to 4100lbs and his Plaid still only ran a 9.1
@DragTimes2 жыл бұрын
he also drove his car through a lake.. :)
@SH7SH7SH72 жыл бұрын
@@DragTimes 😂😂😂😂
@Shiftheads2 жыл бұрын
@@DragTimes and didn't have updates yet for track mode etc
@mullholand2 жыл бұрын
And Chet is always carrying a few too many donuts / cheeseburgers. Would have been cheaper for him to lose weight.
@geemy96752 жыл бұрын
lighter wheels can only help with less rotating inertia, although you are right as long as the power is traction limited, it won't change anything. the only hard limit in the software is the speed. plaid with wiegt réduction run as low as 8.94
@goatmaster3387 Жыл бұрын
That looks amazing. Only thing I would do is powdercoat the rims.
@haysdb2 жыл бұрын
Which Signature wheels are these? There are dozens.
@GRANDMASTERPETER2 жыл бұрын
NICE!!!
@fabio_77782 жыл бұрын
Thanks my friend for your videos.. It's perfect 👍👍👍 and I don't know what many people say about Tesla s plaid and all Tesla models but I love Tesla .. S plaid is most beautiful than taycan and e tron.. Ok and taycan turbo s is amazing car but Tesla is 🔥🔥🔥🔥🚀🚀🚀🚀🚀
@robintaylor14902 жыл бұрын
Looks great, any time difference in the quarter mile ?
@sakimano2 жыл бұрын
None
@Johnny2Feathers2 жыл бұрын
Probably get your answer in his next video ..
@IReahpZz2 жыл бұрын
@@sakimano lowering always helps.m3ps have seen 2-5 tenths in the quarter depending on setup and what you are running for suspension.
@thomaskrutulis22892 жыл бұрын
12 lbs per wheel for an awd car is significant. If it hooks it’ll be quicker for sure
@michaelschneider5302 жыл бұрын
@@thomaskrutulis2289 maybe. Maybe not. There is a guy with a gutted plaid. I think it weighed in at 4400 vs 4900 before getting it and he wasn't much quicker or faster at all. Not as much as I expected for removing 500+ lbs. I think he picked up like 0.1 in the quarter
@SlanSellsCars2 жыл бұрын
Nice!!!!
@Strawberry_kit2003 ай бұрын
I want these in my Taycan but will they mess with the automatic air suspension? When I put it in sport mode it lowers. Can I install these without rubbing.
@hobby_dude_2 жыл бұрын
So doing the mod is really tricking the position sensor positioning. I wonder if that's why it didn't go any Cheetah mode because you're hitting bump stop or something and the position sensor never gets to target position?
@derrickd52 жыл бұрын
They are coming out with a camber adjustment kit soon. Waiting for the pre order. N2itive states should be out by June but pre order should be out soon
@honza456992 жыл бұрын
that loks cool
@elgapitan3 ай бұрын
What did you set your links to when you installed them?
@meanmugginj2 жыл бұрын
Man i wish my Volvo S90 had that wooooooow
@alintiniuc Жыл бұрын
Dang. I wish they had something like this for the model y performance.
@chargeheadsuk2 жыл бұрын
Its all about Modding EV's and EV Conversions 🤟⚡🤟
@jehazel752 жыл бұрын
Hey Brooks, how does this affect daily driving? For those who don't really track their Plaid, would this still be a good setup for a daily driver?
@DragTimes2 жыл бұрын
perfect for driving every day.....
@LearningFast2 жыл бұрын
Looks great! Did I see another Tesla in your driveway? I thought your only Tesla left was the Plaid?
@DragTimes2 жыл бұрын
I have a Model Y Performance as well...
@The_journeyy2 жыл бұрын
The stance on it looks so much more aggressive 😳
@ait94962 жыл бұрын
Have u ever considered going with 18" wheels
@ryandoyle43442 жыл бұрын
Drag radials - first 8?
@joseph123us2 жыл бұрын
Nice, I will be buying me Tesla.
@spedracer552 жыл бұрын
super easy!
@gblikesnikes2 жыл бұрын
Tesla definitely got this design from the W211 chassis E55/63 AMG. My AMG fellas know about lowering links.
@sheaandtesla45992 жыл бұрын
What a sick machine thats fucken mad!
@J.e.f.f.r.e.y2 жыл бұрын
Are there adjustable links to lower model 3 performance?
@Shiftheads2 жыл бұрын
No. You need an adjustable coilover like the mountain pass performance ones.
@foxy58552 жыл бұрын
beautyfull :D
@jonathanviventi13802 жыл бұрын
Do you have half shaft vibrations? It seems like lowering the car may eliminate the front half shaft vibration.
@DragTimes2 жыл бұрын
no vibrations
@jonathanviventi13802 жыл бұрын
@@DragTimes strange that some cars have it and some don't. My vibrates a lot between 40 and 50 mph. They replaced the front half shafts and that solved the problem for a day or two and then it came right back.
@IntegraDIY2 жыл бұрын
Video a little underexposed, couldn’t really see the drop too good. But from what I can tell, she’s sitting pretty 😍
@recca72 жыл бұрын
quick inexpensive solution to make your car look even more aesthetically pleasing...awesome bit of kit. Wish it was that easy on all cars
@alexl.1022 жыл бұрын
I agree, most cars look better lowered non dedicated sedans. Ive done so on most of mine, camries and civics etc. Helps with driving characteristics
@Mastermoussa2 жыл бұрын
Inexpensive? 400$ for some metal parts that are probably made in china and don't even need to be out of metal is "inexpensive" ? Man.... Something like 80$ would still be expensive for these 4 little pieces. You can get a really good flashlight with metal housing and a really bright LED for under 5$ from aliexpress that is also made in china. That is way more engeneering, same quality and tech for only 5 bucks.
@recca72 жыл бұрын
@@Mastermoussa pretty sure the shop is American and how much does it cost if you want to lower your car? And this is adjustable
@Mastermoussa2 жыл бұрын
@@recca7 Doesn't matter if it is an American shop. Everyone can produce in china. But that is not the point. The point is that it is way too expensive for what it is. This thing is from factory out of plastic, because it is only an indicator for the sensor, where the car is right now. So it is definitely overengeneered. Adjustable is of course good. But you can also make a pack of 20 plastic pieces with different lengths (5 different with 4 of the same lengths) and sell the pack for 30$. Becuase you will only set it once anyway. But you could also sell this metal kit for 50$ and still make big profit.
@recca72 жыл бұрын
@@Mastermoussa then you should do it. There's no patent on this
@queefreak6662 жыл бұрын
The Tesla channel
@luizfl2 жыл бұрын
I did notice the same at cheetah mode. But think that is not big deal.
@shadow-cq7sh2 жыл бұрын
how much
@Ju_do_2 жыл бұрын
cool
@omarcortes57542 жыл бұрын
Doesn't it hit with the speed bumps?
@zoidburg29752 жыл бұрын
It automatically raises for those.
@omarcortes57542 жыл бұрын
@@zoidburg2975 Didn't know that. Interesting.
@alim75022 жыл бұрын
Hey when are you uploading Plaid vs 765LT rematch?
@akira28shima322 жыл бұрын
Keep it mysterious or else you’ll never look at the losing car the same.
@devyashjangid24252 жыл бұрын
Won't matter 765LT will still get smoked
@drrightwing44352 жыл бұрын
Should’ve known this was gonna be this easy. Most KZbinrs have limited mechanical skills, (save Cleetus, Tavarish and a couple others), so this vid of lowering this Tesla and how simple it was shouldn’t be surprising, at all
@tobinsarttrading17332 жыл бұрын
That’s it you don’t need to do much else… 9 second car and looks just right!
@hengloose2 жыл бұрын
Hate my wheel gap on my model 3. Air suspension soon 🤙🏽
@alexnutcasio9362 жыл бұрын
who has air suspension?? Tesla doesn't offer it on Model 3 nor Y.
@hengloose2 жыл бұрын
@Alex NutCasio accuride, airlift, etc. There are plenty of model 3/Y owners running aftermarket air suspension kits bro
@gregdixon1722 жыл бұрын
I lowered my 2021 model 3 Performance just with new springs. Down 35mm. Looks way better.
@alexnutcasio9362 жыл бұрын
@@hengloose sorry mate, but I have never seen one (Y or 3) on the road or at meets with an aftermarket air suspension. NOT saying they don't exist, but have not seen one and there's a shit ton of 3 and Y around here.