I picked up a 94 hardbody back in march. First thing I wanted to do was drop it on the cheap. Found your Video and WHAM lowered my truck for $34 !!! Thanks for the info an video u da man!
@STONEBROKEGARAGE4 жыл бұрын
Haha that’s right man I’m glad to hear !
@jesusmarquez99483 жыл бұрын
STONE BROKE GARAGE where do you live
@iliveindetroit14 жыл бұрын
80's baby...we love it..smart man...you dont have to explain to these new cool fools
@joebarcena62654 жыл бұрын
Cut the bump stops with a zaw zall you'll get a smoother ride
@williamcrazylacyfurmage9953 Жыл бұрын
love the video, My 80 Datsun 720 king cab height is like a 1" or 2" lower on the driver side than the pass side. Is all i do is tighten up the driver side to bring it up some, or do I have to pull the bar off and move the spine a notch over a turn on driver side to go up a little? I want to bring up the driver side to match the passenger side height
@CasualBO2Shots4 жыл бұрын
Just installed 2” drop spindles and it feels as if i left the truck at stock hight!
@STONEBROKEGARAGE4 жыл бұрын
That’s right !
@philiphapeshis12262 жыл бұрын
I used to use a angle block when lowering.Ao you don’t need a angle correction block?
@daninster Жыл бұрын
Hi there, first of all great vídeo... Can you tell me the torque for the u-bolts? Thanks
@tonyest7072 Жыл бұрын
Hey man do those two long bolts just tension up by them selfs after lowering and riding it or how does that work
@freshram1929 ай бұрын
With 15x10 and 225 50 15s how much would you suggest i lower the truck
@gerardomedel96193 жыл бұрын
Hey bro I have ? For you I have 1984 Nissan 720 I just purchased but in front is to lower indeed to reindex torbar how hard is to do
@STONEBROKEGARAGE3 жыл бұрын
There is no need to reindex the torsion bars
@91SanCheZ74 жыл бұрын
I want to lower my square body Chevy S10 from the rear so I just need the rear kit right bro
@STONEBROKEGARAGE4 жыл бұрын
Yeah
@FernandoHernandez-qy9wk4 жыл бұрын
Is there any difference between the block brands other than price? Great help btw!
@STONEBROKEGARAGE4 жыл бұрын
I’ve bought cheap blocks ($30) & I’ve bought expensive name brand blocks ($150) & I don’t see a single difference
@wulmeralenxandersanchezfir62584 жыл бұрын
Hola bder una pregunta que tipo de ring andas y que medidas de llantas andas .se ve bien bonita X que bajo aún más saludos bros desde Nicaragua
@STONEBROKEGARAGE4 жыл бұрын
15x10 riñe y 195/50R15 llanta
@expressmechanic85874 жыл бұрын
excellent job I did that my d21 but the bad thing in Guadalajara Jalisco Mexico the roads are orrible greetings
@STONEBROKEGARAGE4 жыл бұрын
I’ve been there and some a pretty bad haha. So are the roads where I’m from
@alonsoburciaga44693 жыл бұрын
What kind of wheels are on the last truck in the video?
@jonathanlopez73133 жыл бұрын
Nice truck man, sad to see what happened to it. I was thinking of doing the exact same thing to a 1980. However when I checked the link it says it wouldn’t fit. Do you think it would fit? Don’t want to buy and put in all the work if at the end of the day it won’t fit.
@crisz58934 жыл бұрын
Does ur hardbody in the rear make a wierd noise in 4th gear when ur driving
@STONEBROKEGARAGE4 жыл бұрын
No I don’t think so
@crisz58934 жыл бұрын
STONE BROKE GARAGE I have a Nissan hardbody with 4 inch blocks and a leaf redrill and it makes a wierd noise people tell me it’s cuz I don’t have angle blocks not sure tho
@pinchechapoalv70894 жыл бұрын
What else did u add in the rear to get that extra 2 inches bro ???
@STONEBROKEGARAGE4 жыл бұрын
What extra 2”? I took out the 2” blocks and replaced them with 4” blocks
@jerrysantiago7994 жыл бұрын
Great video bro! Thoughts on bell tech 2”inch drop shocks?
@STONEBROKEGARAGE4 жыл бұрын
I’ve never ran them personally but I’m sure they would feel great since they are new shocks !
@mirrakmori18284 жыл бұрын
What are the wheels on the black Nissan?
@STONEBROKEGARAGE4 жыл бұрын
15x10 steelies
@michaelrascon16044 жыл бұрын
Hey bro do you know if a 1 inch block even makes a difference? Is it noticeable?
@STONEBROKEGARAGE4 жыл бұрын
In my opinion it’s not worth the work, 1 inch would only be noticed by you since you did the work but no one would be able to tell. I even think 2 inch isn’t enough but that’s me haha
@MrSpikenrail2 жыл бұрын
Do all 6 lug rims fit a 720
@ethanramdahin80164 жыл бұрын
What’s the safe max lower height for the front in inches
@STONEBROKEGARAGE4 жыл бұрын
Realistically like 1-1.5” lower than factory
@freshram19211 ай бұрын
Does an 86 nissan 720 have this front torsion bar suspension?
@STONEBROKEGARAGE10 ай бұрын
Yes all Nissan 720’s have it and hardbody as well
@freshram19210 ай бұрын
@@STONEBROKEGARAGE so it should be easy as hell to lower it even though it'll ride rough.
@maxxrapid16114 жыл бұрын
What’s size tire was on the old wheels ?
@STONEBROKEGARAGE4 жыл бұрын
205/60R15
@cindyrubyoxoxox38824 жыл бұрын
Really helped, screw bags bro. No front splitter ? Aha
@STONEBROKEGARAGE4 жыл бұрын
Haha that’s right ! Splitter ?
@snakebolt10683 жыл бұрын
My 720 is very low i broke my torsion bar key is there any places that sell them because I can't seem to find them and I want to get rid of my lean to the right
@STONEBROKEGARAGE3 жыл бұрын
Junkyard would be your best bet probably
@freshram1924 жыл бұрын
Love the video. Trying to figure the best way to lower my 1986 dodge ram d50 (Plymouth Arrow) it's a budget build. Keep the videos coming.
@bigstillow913 жыл бұрын
If I go 3 inches in the front? But I'm just cruising around should I be ok?
@STONEBROKEGARAGE3 жыл бұрын
You should be okay with only 3”
@chuygonzalez54233 жыл бұрын
I know this a crazy question but can you stack the lowering blocks???
@STONEBROKEGARAGE3 жыл бұрын
Technically you can, but I wouldn’t recommend it. It’s very sketchy and it’ll make your rear bottom shock mount super close to the ground.
@chuygonzalez54233 жыл бұрын
@@STONEBROKEGARAGE ok man thanks., I just want to go low but with no bags
@STONEBROKEGARAGE3 жыл бұрын
Check out my channel, I have some alternative ways to go low static without stacking blocks. My yellow hardbody is laying frame static
@MannyMadeIt3 жыл бұрын
ik this video old, but will these work on my 98 tacoma??
@STONEBROKEGARAGE3 жыл бұрын
They make blocks specifically for Tacoma’s
@MannyMadeIt3 жыл бұрын
@@STONEBROKEGARAGE I would appreciate any links to where i can get them
@joelcano9973 жыл бұрын
what's ur wheels specs bro
@haffizzahiah3872 жыл бұрын
Hi bro.. I 'm from malaysia.. What a block and U skru name? I want seacrh in marketplace
@STONEBROKEGARAGE2 жыл бұрын
Belltech.com
@static240sx74 жыл бұрын
Clean truck
@grapplerguy20074 жыл бұрын
Great video. Subscribed
@Braaaahufaka4 жыл бұрын
Hey bro, so i ended up dropping my hardbody with 3” blocks and adjusted torsions to match. But after a few months im noticing my fromt end is sagging down more then i originally adjusted it. Is it possible my torsions are going bad? Or do you have any suggestions? Thank man love the vids
@STONEBROKEGARAGE4 жыл бұрын
That’s just the way they are. When you adjust them to a certain height they always sag a little more because they settle. You could either leave it or raise them up a bit to match
@Braaaahufaka4 жыл бұрын
Damn alright, thanks for the help bro! I was honestyl just thinking of putting in 4” blocks and taking out the 3” so it gets even that way lol😂😂😂😂
@jh998cc3 жыл бұрын
Not really tryin to point this out but, if you jack up the rear of the truck, your wheel chocks should go in front of the front tire. Just trying to keep ya safe bro
@STONEBROKEGARAGE3 жыл бұрын
Appreciate it!
@elcompatony55204 жыл бұрын
Gonna do this a suburban wish me luck 😣
@STONEBROKEGARAGE4 жыл бұрын
Should be dope once done !
@elcompatony55204 жыл бұрын
STONE BROKE GARAGE yeah so I don’t know much about American trucks I have to do some other sht I was used to dropping hardbody 🙃
@Treybfishin3 жыл бұрын
RIP
@ShortyzKustomz3 жыл бұрын
Next time just cut the u bolts on top the axel... 15 seconds and done
@carterharston552 жыл бұрын
I wouldn't recommend this for anybody who doesn't know what they're doing. My dad and I raised mine up and it was a pain to get the blocks out. If you want to still do it go ahead but I'm warning you
@rsnmanv29824 жыл бұрын
ree drill the shakle
@davidswan62314 жыл бұрын
Bet it didn't improve the ride
@STONEBROKEGARAGE4 жыл бұрын
Nope still the same as it was which is a plus for me because I was expecting it to get worse !