LS 376/525 hp swap in a awesome 2 door truck from Mexico. Transmission upgraded from the 4l60e to 6L80E by Velocity Customs.
Пікірлер: 167
@geomic50615 жыл бұрын
installing crate motor ls3 525 hp in my 2008 hummer h2,you were a lot of help thanks
@walidh61144 жыл бұрын
How is it ? Did you do it ? I'm thinking to swap my H3
@benjaminblackwell14214 жыл бұрын
I did a LS3 480 in my H3
@walidh61144 жыл бұрын
@@benjaminblackwell1421 How is it ?!
@benjaminblackwell14214 жыл бұрын
Walid H it’s great just need to get it retune. The reverse gear is giving me troubles. I put in a 3200 stall as well. But it is a beast and it pulls hard when I get on it. You can see it on my gram @bbrblackwell and I’m on Facebook as well.
@sd455pontiac3 жыл бұрын
At 5min, a 4l80 wouldn't last a week? Yet they're behind 1000 horsepower turbo LS combos. The 4l80 and 4l85 is basically a th400 in overdrive form and the strongest of the GM overdrive transmissions.
@menogusta98292 жыл бұрын
I know this is an old comment, but they were referencing a 4l60e vs 6l80e a lot before that point, he probably misspoke.. cause a stock 4l60e generally wouldnt last
@AQWbladefire Жыл бұрын
Lol I paused the video right after he said that to come to the comments.
@rubenmojarro16 жыл бұрын
I pass by that shop all the time and see those jeeps off the frame and always wondered if they get ls swapped, You just confirmed it haha. awsome truck and definitely subscribing!
@swathdiver4893 жыл бұрын
K2s had two 12-bolt options, 9.5 (5.3) and 9.76 (6.2) inch. GMT900 Pickups with 6.2 had the 9.5 inch 14-bolt.
@chriskubond63145 жыл бұрын
Beautiful!! Awesome truck. Sounds NASTY!!
@biker10075 жыл бұрын
*12 bolt rear end count the bolts on the cover shown in the video right after he says 14 bolt
@Mexican928Dunner3 жыл бұрын
Probably meant to say 10 to 12 bolt conversion
@kahea5 Жыл бұрын
I just bought a 2011 4.3 Silverado and i seen this video and I'm loving everything about your truck. if i had money i would beg you to build this for me. my truck would fall apart as you pass lol. great job!
@RickyLandry-hd1tw3 ай бұрын
I would love to do this to my 2013 Chevy Silverado
@TBGaels323 жыл бұрын
This video looks like it was shot in North Las Vegas.
@JeremyMetcalf-w2jАй бұрын
This would be a great swap for a G8.
@hectormiranda60104 жыл бұрын
Nice!! I would like to get the same rear end for my silverado ,those came out on 1995 on some tbi gm trucks ,6 lug 9.5 ring gear. Good job man.
@Dr_Xyzt6 жыл бұрын
I might have to do a 2017 Axle swap then. I have a 10-bolt for now, still with 245/65/17 tires, trying not to break it.
@neilpatterson87049 ай бұрын
id like to do this swap on my 2012 gmc sierra
@ja1971chevelle9 ай бұрын
What a 4l60e to a 6l80e swap in a 2008 Silverado 1500????
@khakirock49795 жыл бұрын
Got this same engine in my YukonXL. shit is badass!
@banga80806 жыл бұрын
1st time on your channel I'm subbing now
@tarickhood31723 жыл бұрын
Bad ass I want that exact set up on my 87 k5 blazer
@Ls3guy6 жыл бұрын
The 4l80e will hold a lot of power
@swaptimeusa6 жыл бұрын
Randall Wyatt they can but we prefer the 6 speed autos.
@lacheyenne10006 жыл бұрын
Swap Time what needs to be done for the 6l80 swap besides the tranny?
@cbr1thou5 жыл бұрын
Gee thanks mr obvious
@xalmightyxjayx36475 жыл бұрын
Swap Time yall said that the 4l80e wouldn’t handle 525 hp though? Transmission shops have said otherwise.
@GoodguyRaalo2 жыл бұрын
I want to do this to my 1995 Chevy Cheyenne
@turboflacko9464 жыл бұрын
Hot damn he held for the full 8 and some
@keithstr924 жыл бұрын
Hell yeah, great job on this!!
@MrChristianbowman824 жыл бұрын
I love the build but it’s wierd how confused these guys are. 4l80 is a badass transmission you meant to say 4l60 and also you put a 12 bolt in not a 14 bolt and meant to say the 10 bolt is what it had in it and that it wouldn’t hold up!
@1987FX163 жыл бұрын
Laughs in factory 6.2 6l80 14 bolt 3.73 4WD. It'll out 60 foot and 0-60 5.0 mustangs all day. Pisses them straight off racing red light to red light, ole grandpa trick with stock exhaust and camper shell. lol
@jakestatefarm3238 Жыл бұрын
That trucks too clean to be missing the caps on the wheels smh
@ryanmcbee33815 жыл бұрын
What parts did y’all use for that rear end swap? Is there a guide or video showing that? I’m interested in doing it to my truck
@Dr_Xyzt6 жыл бұрын
That truck is badass.
@GarenteedTires Жыл бұрын
What sz stall and what gears?
@crop612 жыл бұрын
How would that setup work in a 2011 silverado
@mikeclay466610 ай бұрын
Cool Stuff.😁😁😁😄😄😄😎
@midwestcatz58965 жыл бұрын
Sick truck but damn them hats guys .
@erk251 Жыл бұрын
What’s the cost of this?
@DownHillgamer2 жыл бұрын
Shitt, I need one of these in my 02 dakota
@DOPEGAMETV2 жыл бұрын
I’ve been searching for someone to swap a corvette engine in my 2000 Tahoe Z71
@MrHALFPITT3 жыл бұрын
.my favorite channel
@JoshNorradMusic2 жыл бұрын
Thinking about 525 cam in my camaro… How does it handle on the street? Lots of surging at low rpm’s? Or is it all good for a semi daily driver in summer months.
@bernyzamora79135 жыл бұрын
How can i contact the shop? Or Location of the shop?
@swaptimeusa5 жыл бұрын
Velocity Customs in Las vegas
@40calDeathPunch6 жыл бұрын
Velocity Customs on the 4l60e swap to the 6l80e were you able to use the wiring harness from the 4l60e/tcm? What about the transfer case? 4l60e has 27 spline output shaft 6l80e has 32 spline. Did you use transfer case from doner truck. I have an 08 Silverado 4X4 I want to do the same swap. Thanks for the info and great video
@swaptimeusa6 жыл бұрын
ZeroCool we used a later model engine harness along with the transfer case off the 6l80.
@robertoalmendarez2436 жыл бұрын
Is that by sunrise mountain Las Vegas
@mikes32093 жыл бұрын
Do you have a shop in AZ or a website? I want to swap a 383 stroker in my 98 silverado and was wondering if your shop was available, I'm in the valley. Thank you
@thehoule702 жыл бұрын
Nice truck
@rogerestes80975 ай бұрын
Do you know if this truck still passes emissions after putting this engine in it?
@Ben-fk2iz5 жыл бұрын
wish I had a 6l80. It seems that the 4l60 cant handle a 5.3 at its potential output.
@WilliamStewart15 жыл бұрын
A 4L60 can't handle a 4.3's potential lol, weak transmissions. Considering how cheap and easy it is to swap in a 80e I don't know why anyone would stick with a 60.
@matthewrodriguez41426 ай бұрын
what about a 5.3 NNBS to 6.0 with 6.2 heads or just 6.0 heads and E85 & Street tune and 4l65 maybe than eventually 4l80
@matthewrodriguez41426 ай бұрын
i have same truck and wanna add 6.0 after 5.3 or soon
@samcowell27682 жыл бұрын
What transfer case was used and how did the 4X4 launch goi have a 1984 K body I want to put this in and can't find a transfer case that would allow me to make the truck electric????
@greedymoneymusic6 жыл бұрын
Thinking about going with this crate engine in my c10 1984 . Will this engine bolt up to a mechanical transmission like a th400? What are your thoughts on that ??
@Dr_Xyzt6 жыл бұрын
Those automatics are great and all, but when you get a T56 Magnum with a lightweight flywheel, it becomes a space ship.
@toddmcmahon26485 жыл бұрын
@@Dr_Xyzt amen!
@muntuable5 жыл бұрын
I think you c10 far better of a swap to see
@rayz4.858 Жыл бұрын
I’m interested in something like this same truck not a Cheyenne tho 4.8
@MrViper71212 жыл бұрын
Did the instrument cluster need to be replaced due to the 6 speed having the PRNDM setup compared the 4 speed PRND321 setup?
@DoctorRickSanchez2 жыл бұрын
_Did u upgrade the torque converter in the 6L80e to a 6L90 one? It would've been worth it while you did the trans swap the 6L80e torque converters are known to go out around 120k._
@patriciamartinez40566 жыл бұрын
Subbed! Learned allot in this one video. Are y'all doing an update with 4x4 burnouts soon. Love this truck man!
@patriciamartinez40566 жыл бұрын
Would you recommend the 6L80 to pair with a 430hp LS3? or could I stay with my brand new 4L60?
@toddmcmahon26485 жыл бұрын
@@patriciamartinez4056 In the video we just watched the lead dude with Velocity say the 4L60 is crap. It's fine and everything for the 290 HP 5.7 Vortec I've got in my '96 Silverado K1500. But, I'm not sold on the fact that it could handle anything above 400HP! You're pushing 430HP and a significant increase in torque. I'd go with the 6L80 and a programmer to fine tune your shift points. Better safe than sorry.
@hectorguevara68155 жыл бұрын
I’m installing a ls3 out of 2010 Camaro in my 04 Silverado. I’m having a hard time with the wiring did u use the ls3 corvette wiring or did u get a 6.2 Escalade wiring. Or did u build a stand alone wiring. Wat do I need to do to the wiring to get the motor started. Thank bro
@ElGalIo25 жыл бұрын
Hector Guevara Planning on doing the same.
@northernatomicalatv92622 жыл бұрын
have you guys ever installed one of these LS engines in the 2015 silverado models to replace the stock engine from the original 5.3l eco tec engine ?
@dano4572 Жыл бұрын
HOWS THIS,,,, (#1),1997 OBS GMC K1500 4X4 SHORT BED ,,, OR ,, (#2),1999 OBS CHEVY 2DOOR 4X4 WITH 4" LIFT ON 33"KO2's ,,,,,,, WITH AN E-ROD ( 50 STATE SMOG LEGAL), LT4 WITH A 8L90E SET - UP AS A FULL-TIME 4X4? WHICH ONE SHOULD I DO????????
@lauztarizonaboy8205 Жыл бұрын
Is there a part number for the rear end you got from the 2017 & is that from a 1500 or 2500
@raultorresjr20034 жыл бұрын
On your axle swap what yoke did you use ?and did it bolt up to the shock brackets or u modified it ? Want to do the same thing
@toddmcmahon26485 жыл бұрын
Hey guys, I've got a 2018 Silverado K1500 (4x4) 5.3 and a cool looking 4-inch lifted 1996 Silverado K1500 5.7 Vortec. The '96 only has 174K miles but since replacing it with the 2018 I've seriously been considering rebuilding the '96 rather than selling it because the '96 is just cool looking to me. And, it's been a good truck. I'm thinking about going with an LS3. I'd love to go with either the 480HP or 525HP engine but with a 5-speed manual. What kind of numbers should I expect to pay on a swap like that?"
@JohnnyRebKy4 жыл бұрын
Todd Mcmahon with a new manual....12 grand minimum
@stevewilkinson611711 ай бұрын
Where you out of? I have a gmc 2014 I want this done to.
@bigr38954 жыл бұрын
I want to do the same swap in my crew cab Sierra SLE. Still want the 4x4 capabilities and sport car power. Sign me up
@SgtS0apy4 жыл бұрын
just did it
@gilbertomendoza2113 жыл бұрын
Awesome 👏🏿
@ericperry49343 жыл бұрын
What type of work to the 6l80? Built? What parts? What is redline rpm?
@Blando78873 жыл бұрын
Daaaaam Miguel
@TheGarlandMC4 жыл бұрын
I just purchased the ls376/480 from gmperformance for my 2011 5.3 silverado. Was wondering if you could send me a link for the wiring harness and if possible the 2017 rear end. And possibly anything else I may need. If it isnt to much trouble. Been looking around and havent seen it done much.
@Ayeguey5 жыл бұрын
Badass plan simple
@holeshot17215 ай бұрын
Bruhh your cuhh wennt hammer down!!
@jerez.21334 жыл бұрын
Nice I am interested in this swap on my 1990 Chevrolet 1500 I had in mind the 6.2 but I love this set up how can I get in touch with you for pricing
@goodjr82262 жыл бұрын
What was the total cost of this install?
@trentdaddydolla647 Жыл бұрын
If you're letting a shop do it maybe close or over 10k lol
@YAHSHUA22852 жыл бұрын
How much for something like this truck got done Cost
@ToritoJr715 жыл бұрын
Do you sell the harness? I have a 2008 Silverado with a v6 and want to put an v8 in it but just having problems with the harness or how can I get in contact with you?
@troybutler88363 жыл бұрын
Will that work on a 2003 Chevy Silverado? If so about how much would it cost?
@josemanuel57496 жыл бұрын
It still having the column shifter?
@k.bellingham83353 жыл бұрын
Did you get the tap shift working?
@grasshopper70005 жыл бұрын
I have a 2009 Chevy Silverado 4.8 how much does the swap cost
@aerooo34664 жыл бұрын
grasshopper7000 just throw a single turbo on there you’ll be making about the same horsepower but for less of the cost
@georgiaspeedster78004 жыл бұрын
How much would be a turn key, out the door price on this?
@TRB02ss5 жыл бұрын
4l80 will hold anything you through at them stock let alone built!
@swaptimeusa5 жыл бұрын
TRB02ss a 6l80e is just as strong and has more gears. It’s up to whatever the customer wants. I like the new transmissions and the ability to tune them to shift however you want. Also you get true tap shift for lighting quick shifting.
@Lokomart4 жыл бұрын
Swap Time lighting quick ha! That’s a good one.
@freddymenchaca61332 жыл бұрын
What fuel system did u upgrade to??
@mannyfresh84846 жыл бұрын
@swaptime what’s the difference between corvette 6.2s and escalde 6.2s
@jmanjoshua15166 жыл бұрын
The corvette motor has different heads, cam, and everything else. Same displacement size, but much more powaaaa!
@lonniesanchez27325 жыл бұрын
No vvt different cam valve reliefs in pistons light weight valves and different intake.
@DTB_RARA4 жыл бұрын
Lighter valves & valvesprings along with a diff cam
@SIX4TALL4 жыл бұрын
Could of just got a 2007 ss trailblazer ls7 a lil cheaper comes 390hp
@kevinadams27665 жыл бұрын
I would love too have that set up in my 98 Silverado
@Dr_Xyzt5 жыл бұрын
I did it to my '98 single cab. It's on my channel. Still using the G80 until the new locker comes in.
@cleatussfmo74375 жыл бұрын
What would it take to swap an LSA into a 2012 silverado? Will Chevy performance "connect and cruise" package allow for a straight forward install?
@swaptimeusa5 жыл бұрын
carl moore It should be an very easy swap. I can do the engine harness.
@raider814662 жыл бұрын
how much torque???
@sleepspace90433 жыл бұрын
How much was this build total?.
@15roundchamp44 жыл бұрын
Im gonna order the ls3 525 with the transmission from chevy for my 02 silverado. Would I have to do anything to the rear and front end?
@alexaprelude5 жыл бұрын
Whats the lift and tire set up ?
@420Panson5 жыл бұрын
Where are you located at Miguel ......?
@bansheemcqueen4 жыл бұрын
Las Vegas Nevada velocity customs
@jonathanmurillo51723 жыл бұрын
Where are you guys located?
@BadAssEngineering6 жыл бұрын
That Mexa is from Sonora all
@racingbuilttough73643 жыл бұрын
What fans do u run
@ztwntyn83 жыл бұрын
May as well 4wd launch without the customer dude just ragged the shit out of it the doughnut contest lol As for the drag strip you should be in whatever gear is 1:1 so likely 3rd if this is 4spd auto and ideally about 200 rpm past your shift point. Also yeah cheyanne has been on chevys for many years. are you sure you are a car guy??? or maybe you are the camera man for the ch? The engine raised hell that’s for sure. If it does that in a truck it should rip in a 2n gen Trans Am
@mannyfresh84846 жыл бұрын
Also how would I go about swapping a 5.3 in my escalde would it mate to the 6l80e?
@johnjetton38573 жыл бұрын
What kinda mpg’s
@Mr.Beastforpresident5 жыл бұрын
Where's the shop? What would the Hwy MPG's be with stock LS3, 3:23's and stock 6l80e in a 2014 Silverado ext Cab with 6' bed?
@Mr.Beastforpresident4 жыл бұрын
Tom Wetz Nice, Who built it? Are you familiar with the 5.3 and 4.3 Ecotec?
@Mr.Beastforpresident4 жыл бұрын
Tom Wetz Nice 👍! My kinda guy! Ever seen a Fully Mechanical ( Springless ) Dual Rocker arm Valvetrain? Essentially no chance of valve floatation and less cam wear/load
@Mr.Beastforpresident4 жыл бұрын
Tom Wetz How about a ( Naturally Aspirated ) reverse Turbo Charged engine along with Mechanical Springless Valvetrain? Sounds unbelievable huh?
@Mr.Beastforpresident4 жыл бұрын
Tom Wetz FWD video to 15:05 and play for 2 minutes then FWD to 20:00 min and watch for 2 minutes. kzbin.info/www/bejne/nZizdoR9aLKCZ9U
@Theinstruments_4 жыл бұрын
I really want to do this swap. But I need it to pass smog. Does your setup pass smog and what can I do? Thank you
@Theinstruments_4 жыл бұрын
I was able to get the engine and trans connect and cruise and it passes smog with the right tuner
@frankbeans21755 жыл бұрын
I just got a half chubb
@kevg6444 жыл бұрын
Mpg's?
@in_the_building14 жыл бұрын
I don’t play tag bisshh I been it!!
@tyronehutchinson85645 жыл бұрын
How much to get one install in 1990 Chevy caprice
@bricktalk7765 жыл бұрын
Tyrone Hutchinson go to your junk yard you'll be surprised on what you find